Basic system settings in ECC & In BW

Dear SDNers,
What are system basic settings(Configuration settings) in ECC need to be done relevant to BW if the BW system has to stsart.
Please guide me with some SAP best practice guides to follow .
Thnaks,
Satya

Hi
You can more information in this B84_BB_ConfigGuide_EN_DE.doc file , search that doument in Google.
RFC main T.code is SM59, need to set the inbound and out bound settings.
Regards

Similar Messages

Settings: Why are basic webservices settings not included (i.e. OneDrive behavioural settings are hidden in the system tray)?

What is the idea of a new control panel if you can not in fact get an overview or kind of dash board?
Settings includes PC+Cloud, i.e. Accounts let you do settings for the cloud, i.e. connect to your live account.
But why are basic webservices settings not included (i.e. OneDrive settings is in the system tray)?
Great consolidation is happening now between settings, control panel - i.e. getting rid of obfuscation, blur and complexity between legacy settings (control panel) and actual kind of settings. However do not recreate the problem by leaving the
next step of integrating cloud settings across the middleware. What is the idea of a new control panel if you can not in fact get an overview or kind of dash board?

Hi,
Interesting issue, what about other configuration or settings? Do they work fine or keep reverting after a reboot? Have you tested this issue in another user account? What is the result?
Regarding to unable to save settigs for current user hive, I doubt whether there's an application you installed recently or an malware\virus changes the permission of registry entry or value of registry keys like
HKCU\Software\Classes which causes this issue.
Yolanda Zhu
TechNet Community Support
Hmm... I don't understand. Nothing is reverting after a reboot, as well I'm
not unable to save settings in the current user's hive. The correspondent registry keys can be saved perfectly fine and they are
deleted, not reverted after a reboot. I pointed to the exact code that does it, the code is located in Microsoft DLL with all certificates and digital signatures intact. Permissions obviously don't matter, since svchost.exe is executed with the highest
integrity level and under the System user account, the keys in question inherit permissions, which allow System to do whatever it needs without restrictions
by default, you can't change it to allow more.
So can you explain how it can be some malware?
The issue is intermittent, I don't have a 100% repro, therefore “testing” under another user account is doubtful.
Dei nostra Matrix est.

How to connect two BW systems to one ECC system?!?

Hi Experts!
We want to connect our ECC system (P11) to multiple SAP BW systems. Therefore we made a system copy of our productive BW System (P81) and create a new second BW System (T81). When I want to restore to connection to the P11 in the T81, Iu2019ll get the following error message:
u201CDie Verbindung CA wird im Quellsystem P11_001 als Verbindung zum BW T81CLNT001 genutzt.
Soll diese Verbindung im Quellsystem gelöscht werden? Nach erfolgreicher Löschung wird der Anschluss wiederholt.u201C
In English this message means something like that: u201EThe connection CA is used as a connection to the BW T81CLNT001 in the source system. Should this connection be deleted in the source system? This connection can be repeated after successful deletion.u201D
Now I ask myself: How can I connect our new BW System to our ECC System, without destroying the old connection to our productive BW system?!?
Have anyone of you an idea how we can handle this issue?
Thanks in advance!
Regards, Alex

Hi
This happens because of RFC settings duplication as your new BW system is copied from Old one.
First you restore the Production system connection by deleting the existing RFC. But this will delete the new connection you have created ( that is what your dialog message is saying)
Basically , before creating new connection you need to delete some table entries manually , then you can connect both the system to your same source system
Please find the link below where I mentioned the table names from where you need to delete duplicate entries manually.
How to delete old source system assignment and assign new source system.
Regards
Anindya
Edited by: Anindya Bose on Oct 13, 2011 9:01 PM

System Settings - Memory usage - Application

In Memory Usage - Application, under System Settings, my slider is set to 100% and gives 2560 MB.
I was wondering where this figure of 2560MB comes from, is that the max that FCE can use/access? I have 10Gb Ram on the system in total, why is FCE only using 2560?
Is this normal, or indicating a problem on the system somewhere?
Thanks
Neil

Thanks
That has set my mind at rest. I have not broken it or done something wrong then.
I am just working my way through a basic FCE 4 tutorial book.
More dumb questions to follow
NP

Possibility of connecting multiple BW systems to single ECC system

Hi all,
I have a requirement in my company to connect multiple BW systems to single ECC system. Would like to confirm whether this may not be supported by all BW extractors in particular the delta mechanism?
For logistics extractor in ECC side in RSA7 it stores BW System as target which shows they support multiple BW systems as target, but for FI extractors which keeps delta timestamps in BWOM2_TIMEST table, it doesn't store the target system. I'm afraid if we connect multiple BW systems to single ECC system, some of the delta records might go to one BW system and some others go to the other BW system when we execute delta load in both BW systems.
Thank you very much in advance.
regards,
arie

Hi,
You can very well connect multiple BW systems to single ECC system and you will not miss any delta as well. In the source system for each delta data source a delta queue is maintained for each target system.
for e.g. I have two BW systems ABW and BBW connected to AEC system then for 0FI_AP_4 data source we will have DQ1_ABW and DQ2_BBW as two different delta queues (I am not following any naming conventions, actual names will be as per the target system logical name).
The settings maintained in BWOM2_TIMEST table are across the system and they define some global settings e.g. till what time the FI data should be extracted in BW system, for e.g. the time maintained is 2.00 AM then though you do extraction from multiple systems same data will be extracted till next time interval occurs.
In summery you can very well connect multiple BW systems to a single ECC system.
Regards,
Durgesh.

BI Source System connection to ECC

Hi experts,
I have a BI 7.0 fresh install and I'm trying to connect ECC 6.0 client dev100 (golden client) to BI so I can activate BI Content. However, the client 100 goes to the BI folder instead of the SAP folder when I create source system in AWB. Is this normal behavior?
I have another system client dev200 and it goes inside SAP folder when I create source system. I'm just wondering if this has something to do will my error in BI Content activation. Key figures and characteristics are activated but not DataSources, Update rules, and InfoPackage.
Your comments are greatly appreciated. Thank you

Hi JD,
I think the source system connection must have been made in Bi folder. basically even BI folder shall contain BI system but if ECC system connection is made in this folder it shall not make any diffrence. You must be getting the datasources as of ECC only after replication.
Regards,
Wrushali
Request for points deleted. Please do not ask for points in the forum.
Edited by: Vikram Srivastava on Jun 22, 2010 1:56 PM

SOAMANAGER "Global System Settings" link not found

Dear Sirs,
We are trying to integrate SRM 7.01 with ECC 6.0 EhP 6 using Web Services without using PI.
We have come accross blog "Transfer of central contract from SRM to ECC using Web Services without PI"
by Naveen Rajan.
However we cannot find the link "Global System Settings". Is there any certain configuration we have missed?
Could it be the SLD (taken from the business system name) ?
Where do we set this up?
Thank you in advance for your help.
Marios.

Hi Bala,
Are you putting anything in the Global SNP Setting Profile field. If Yes, you have to define the profile in SNP Customizing under Maintain Global SNP Settings. After defining, anyone of these is to be activated.
Regards,
Manjit

Standard system settings

Hi all,
Could anyone tell me what all settings we need to do when we setup a system?(dev/test/cons/prd
Any SAP Notes or documentation available related to standard system settings?
Thanks in advance and best regards,
Sundar.

Hi Michael,
Thanks for the clarification. I will explain in detail:
We need to setup a lot of systems (post-installation steps) like DEV, CONS, TEST...
Here, I need to check T000 table, SE03 settings, RZ11 paramaters etc.etc.
But many times, I have noticed that the paramaters in RZ11 are not properly set or have some basic values which would not suffice. Unfortunately, I have documentation only for a very few like:
> transport/systemtype,
> login/no_automatic_user_sapstar,
> rdisp/wpdbug_max_no,
> vmcj/option/maxJavaHeap (plus a few others).
I am aware that the value of the parameters changes when the system type changes.
So with this limited knowledge, many times I find it difficult to check if:
a> the parameters have correct values
b> installed parameter set is complete
That's the reason why I thought of a posting in SDN.
I would be really great if you could give me some links/notes regarding parameters.
Kindly let me know if you need any further information.
Thanks and best regards,
Sundar.

MDM Server - Portal System Settings

Hi ,
Can anyone send a link to a good document on MDM Server and Portal system settings.
Best Regards
Sid

Hi Kunal,
Portal is just the Front end for the backend system MDM.
So if the performance in MDM is slow the same will be reflected even on the front end system.
To improve your MDM system you need to set the field properties in MDM correctly .
Basically your data modelling in MDM must be correct.
Kindly Follow the belwo links which will guide you in improving your system performance by efficient use of data modelling techniques:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10c4cd5f-6893-2a10-a2b0-f9cb3cd38a6f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fc0a2e-6561-2910-839e-8ff3e36dd4d6 (data modelling)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/eb7447b1-0c01-0010-8d90-a2e004cad537 (data modelling)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0d8aa53-b11d-2a10-aca2-ff2bd42a8692 (data modelling)
Hope It Helped
Thanks & Regards
Simona Pinto

System Settings-Audio Capture

In FCE, trying to capture VHS via DV converter box. The sound is not coming over. In system settings/scratch disk (internal hard drive) the audio capture is grayed out. Analog RCA composite video & stereo audio connectors in place. How do I get my sound?

You can't get audio during capture as firewire has control.
Use the audio from the play device if you need to hear what's happening. You will notice latency on the FCE capture window, that's normal as well.
Al

Is there a way to default scratch disks in system settings?

This might be elementary, but is there a way to default the scratch disks in system settings to match the project that you are currently working on?
What I mean is when I switch from project to project my auto save files get all jumbled up.. then when I really needed to retrieve one I had to search them out in folders from different projects.... it was a mess
So as I have it now.. I have to open a project then go to system settings and switch all my scratch disks accordingly.. but I always forget to do this not to mention that it is a pain in the *** and time consuming..
Thanks in advance if you can help

I just create one master file for all my FCP projects inside it there is the autosave folder, thumbnail and waveforme cache folders.. then inside each one FCP automatically creates a seperate folder with your projects name.. so you can find them easily

How to change printer and or system settings to print in color

How to change printer and or system settings to print in color

You can change the brightness with an RGBImageFilter which converts the rgb values to HSV, increases the value, and converts back to rgb.

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

SharePoint Reporting Services Integration - System Settings Page Issue

Hi All,
A client of mine has setup Reporting Services (SQL Server 2012 SP1) integration on a SharePoint 2010 environment and this has been working fine for a while now. This includes viewing SSRS reports and also creating PowerView reports from the SharePoint interface.
The only issue that we have is when we browse to the SQL Reporting Services service application via SharePoint Central Administration and select 'System Settings' we receive an error and can't configure any of the settings located on this page.
Looking at the ULS logs I can see the following error is raised:
System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.InitStrings() at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs
e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
43aaadcd-fc67-420e-a30f-2e174f151084
I removed the existing service application and uninstalled the SharePoint Services (using Install-SPRSService). I then reconfigured the RS services and created a new service application but the error is still raised. All other pages under the service application
can be loaded. We also tried setting the reporting services diagnostic logs to verbose but couldn't see any further information.
Has anybody seen this before? I'm thinking that perhaps some of the configuration settings for this page actually carry a null value when it should be configured with something. Does anybody know where these settings are saved?
Cheers,
Tom

Just thought I'd provide an update, we ended up resolving this, problem was related to an incorrect ID one one of the fields in ReportingServicesSystemSettings.aspx.
Updating this to the correct ID resolved the issue. Weird thing was that the file was incorrect on more than one server, only had to obviously update it on the CA server though. After this the System Settings page opened without any problems.

Good day! On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09 When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Un

Good day!
On the ultrabook Asus (System Settings: WIN 8.1 64-bit, Core I5-3317U CPU @ 1.70 Ghz, Memory 4 Gb), set Adobe Acrobat XI Pro 11.0.09
When you convert to any format via SaveAs in WORD, EXCEL, or via the Export file in ... throws the error "Unable to process the document in the module Save As. File not created"

Hi,
Was it working fine for you before?
Is it with some specific documents?
Are you able to convert the word/excel files to pdf?
Regards,
Rave

Basic system settings in ECC & In BW

Similar Messages

Maybe you are looking for