Basic understanding about Essbase Server and Administration Services

Hi
I am a newbie to the Essbase. I am trying to figure out the diference between Server and Services.I am very confused.
Please clarify my understanding
Essbase Server - This is a server in which Essbase stores all the data.
Essbase Administration Services -This is a agent used to communicate to the Essbase Server from the front end ( Admin Console)
Admin Console - This is a front end client used to connect to different Essbase Servers. It is possible to have Essbase Servers to be installed on different machines.
Before connecting to client Admin console we should make sure Essbase SErver and Essbase Administration SErvices are up and running
Thanks
Arun

hello friend
  what ever your saying about essbase server and EAS is correct.If you want more detailed explanation on this please have a look into essbase architecture check this link which gives you better insight
http://gerardnico.com/wiki/epm/essbase/essbase_architecture
it not necessary that Essbase server and EAS should be on the same machine.we can add differnt servers in EAS console.
As far as your last question(Before connecting to client Admin console we should make sure Essbase SErver and Essbase Administration SErvices are up and running)
Before logon to EAS we have to make sure that essbase server,essbase admin services and openldap are up and running
thanks
raj

Similar Messages

  • Very basic questions about JSP server and plug-in.

    Hi all,
    I am wondering what are other ways to make use of the JSP script on a server running normal Apache without changing it to Tomcat. Is there a plug-in version of JSP for Apache that will enable JSP? I am looking for something like PHP plug-in, which is quite generic. They even have a php.exe that OHTTP (a great shareware Win32 web server) can call to run PHP. Is there such thing along this line with JSP on Win32 or Linux? Thanks!

    You need a jsp/servlet engine, and in effect, Tomcat is the "plug-in" you described. Tomcat has basic web server functionality built in, so it can run stand-alone, but it's most commonly used with a robust web server like Apache. You don't have to "change it" to Tomcat - you just configure Apache to forward specific urls (anything ending in *.jsp, for example) to Tomcat.

  • Essbase Server and Deployment Server on different boxes

    Hi,We're currently testing Hyperion Essbase 7.1.2 and we were wondering if it was possible to have the Essbase (Analytic) Server on one machine and Deployment Server on a different one. At first sight, it seemed so, so we did just that.Now, we'd like to test our setup by signing on through the ESS command line prompt (on the Deployment Server machine) but seem to miss something since the connection ("signon") is refused. The funny thing is that on the machine on which the Essbase Server is installed, we've also installed the Administration Services: through the Administration Console, we can indeed connect to the Deployment Server and interact with it.So my first question is: is our setup possible (that is, having the Deployment and Essbase servers on distinct boxes)?If so, what is the meaning of all the parameters needed for the "signon" command of the ESS command line prompt?Any guidance would be greatly appreciated.Thanks,A. Lepage

    Yes, you can configure it that way and we have many customers with that setup.You have to login to the EDS console the first time using the 'default' admin username/password (system/password) and setup a username, with admin privileges, that also is on your Essbase server. Logout, then login with the 'real' username. Select the domain object ('essbase at the top of the tree'), right mouse click and add an analytic server. Type in the name of your Essbase server and it should be added (and you should be able to browse objects on the Essbase server). Finally, select the server, right mouse click and 'sync security'.Tim TowApplied OLAP, Inc

  • How to do configuration the Essbase server with shared services

    We install Hyperion 11.1.2, we install Hyperion Essbase server and planning on UNIX box (64-bit) and FR Report, Essbase administration services and foundation services on windows 2008 (64-bit) server.
    When I am doing the configuration on windows server it’s not asking anywhere Essbase server details.
    How to do configuration with Essbase server and planning where these are on Unix box and foundation services are on windows server.
    Help me !
    Thanks
    Dharm

    I did the install as PTH0RC and my inventory.xml is configured correctly, but I get the following message trying to run a simple view
    C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance>epmsys_registry view
    com.hyperion.hit.registry.exceptions.RegistryException: reg.properties not configured.
            at com.hyperion.hit.registry.Registry.getInstance(Registry.java:338)
            at com.hyperion.hit.registry.regedit.RegEditUtility.main(RegEditUtility.java:101)
    An error occured during the operation. Detailed Message is - reg.properties notconfigured.

  • SQL Server and Reporting Services

    What is the best practice for replicating the same reports for different clients using different databases in the same SQL Server and Reporting Services?
    For example:
    Create a single database for each client.
    Create a single data source in Reporting services for each client.
    Create a folder in Reporting Service for each client, and replicate all the report and point each report to its correct data source.
    Is there an easier method for this type of solution.

    Hi acedenoBI,
    According to your description, you have reports which has same structure for each user. Now you want to have a folder for each client to keep their reports. And each client should have a single database and single data source. Right?
    In Reporting Service, if we need one data source to connect different database dynamically, we may need to use parameter and create dynamic connection string. However, in this scenario, since we need to have a single folder and data source for each
    client, so we can just make copies of the whole project. Modify the Connection string in each data source, change the Initial Catalog to be the corresponding database for the client. This can be an easy way to meet the requirement.
    If you have any feedback on our support, please click
    here.
    Best Regards,
    Simon Hou

  • How to register Essbase server with Shared Services?

    Hello All,
    How to register Essbase server with Shared Services?

    Hello All,
    How to register Essbase server with Shared Services?

  • Unable to start Oracle BI server and Presentation Service

    I am unable to start the Bi Server and presentation service . I start stop, options in service window is coming disabled. Please can any body help on this?

    Hi,
    Please check if you have started the Oracle BI Java host service.
    Check if the OC4j is started.
    Check the event viewer logs. Also check on what account the service is starting.
    Hope this helps ...
    Thanks,
    Anita

  • Register essbase server to shared service in Unix

    Hi All,
    How can we Register essbase server to shared service in Unix server. Can anyone please let me know the procedure or steps.
    Thanks

    Do you mean convert essbase to shared services security as you should of registered essbase with shared services when you configured essbase.
    You can convert essbase to shared services security via EAS, right click security.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Pls Suggest server names for Reporting Server and Shared Services

    Hi,
    Can any one Pls Suggest server names for Reporting Server and Shared Services
    Thanks in advance.

    Report server name: OrclRpt
    Shared Services: OrclSS

  • RMI Server and Provider Services

    Hi Everyone,
    Can I know whats the role of Planning RMI server and Provider Services. On what specific situations do we need to restart those??
    Thanks in Advance

    Any help on this please!!

  • Cannot Add Essbase Server From Admin Services Consol

    Hi
    I am trying to add a new essbase server to my Admin Services list. I get the following error message:
    Error: 1042006: Network error [145]: Unable to connect to [SERVERNAME:1423].
    The client timed out waiting to connect to Analytic Services Agent using TCP/IP.
    Check your network connections.
    Also make sure that server and port values are correct
    The essbase services are running on the other machine.. And I can communicate with the other box using FTP etc. So I think I need to get some ports opened between the source and target servers.
    Can anyone please tell me what ports should I try to get opened. I read the documentation from help menu and it talks about some server.xml file and also says that you need to specift the port names unless they are something other than defaults. But I am not very clear about this.
    Can anyone please help me to figure out what exactly is going wrong ?
    Thanks
    Mandar Joshi

    Review the essbase.cfg on the server machine and look at the SERVERPORTBEGIN and SERVERPORTEND entries. You would want those entries as well as 1423 opened.
    For default configurations ensure any firewall has the below ports opened from the client to the server:
    TCP/1423
    TCP/32768 through TCP/33768
    Regards,
    John

  • Unable access the server from administration services

    Hi Experts,
    Can any one please help on the following issue:
    I have installed the 9.3.1.3 Hyperion administration services on my PC and when I tried to connect to the server I am getting the following error message:
    Could not connect to administration server, client and server are different versions
    Server version is 9.3.1 and client version is 9.3.1.3.
    I tried to download the 9.3.1 administration services from www.edelivery.oracle.com but I couldn't find the 9.3.1 version.
    Are there any other sites available to download the 9.3.1 administration services.
    Also, Can we able to connect to the Linux Essbase server from Windows administration services?
    Thanks in Advance,
    Ram

    Atul:
    Are you connecting to the essbase at remorte server location?
    Looks like Essbase a the C-NOIA131 is not started or not accepting connection request?
    check wheather it is started?
    if it is started; use IP Address and connect, sometimes server name might not work if DNS at u r network is down or not Defined properly?
    I would do a Telnet from the box in which i am trying to fire the connection and connect to the port 1423 which essbase uses to see if u have any firewall issues
    This might be a problem where essbase is not started..in my experience.. let me know u r findings...
    Thanks,
    Sriram

  • Some basic questions about foriegn key , and relationships.

    Hi
    Thank you for reading my post
    I read some documents about foreugn key and tables relation ships.
    but i still can not understnad some stuff.
    1-when we have a foreign key , we have two tables that we want to relate them together
    in a way that one of ? table columns forced to be a value from ?? table column.
    what is name of those two tables , i saw , child-parent , ..... which confuse me.
    can some one please tell me correct name of those two tables ?
    2-some times we need some kind of master details relation like :
    one-to-many : i this case MANY table will have a column to point a record in ONE table , can this relation be a foreign key relation ?
    3-we can achieve many-to-many relation only by using a helper table to host both tables primary keys in a record to relate them together.
    can you point me to some resources that help me to find answers to this questions ?
    or explain them to me ?
    thank you for your time.

    These are critical database basics that you need to understand. I would seriously recommend getting some study in, because proper relational database design relies on the basic principle of data and relationships and a process called normalization.
    In reality, you only really need one gigantic table to host data. It would include everything you would want to know about something - let's take a sales order for example. You would have to record the customer's name, address, etc. along with every item they ordered, etc. You would have a HUGE table full of data that appeared over and over and over again. This is bad design for two basic reasons: it is difficult to query, and it is very easy to have minor mistakes like capitalization or alternate spellings that prevent things from matching up properly. For example, let's say Bob orders 40 widgets and 40 digits. In our hypothetical table, we could put it in as Bob - 40 widgets and Robert - 40 digits. See how confusing this can get even in a simple example? And let's say you wanted to correct all of Robert's orders to say Bob and you found out there were 40 orders from "Robert" How would you know which ones to change?
    The process of normalization helps to reduce the chance for these types of errors in addition to creating a good basis for indexes. You normalize the data by creating sets of parent/child tables with a "key" value to match them. In our hypothetical situation, you could create a table for orders and a table for customers. In the customers table you give all the detail for the customer in one place, and you assign each customer a unique number or ID. In the orders table we add the customer ID (NOT the name) and we ensure that we are getting the customer we want, in addition to saving a lot of space and eliminating redundancy. In our example, the customers table is the "parent" table and the orders table is the "child" table. The child table references the unique entries in the parent table via that id. That reference is referred to as a foreign key. The foreign key in the child table points back to the original and complete record in the parent table and eliminates the redundancy of keeping all that extra data for every order. Foreign keys in child tables always refer to a primary/unique key in the parent field.
    That help?

  • How do I remove previous configuration of Essbase Server from Shared Services?

    Hi All,
    I'm trying to reinstall Essbase Server (on a new server; we've upgraded the Essbase Server hardware) and reload data but the current install believes I've already configured it despite removing EssbaseCluster-1 from Shared Services Application Groups.  Is there something else I have to do to get the new install of Essbase Server configured as a new Essbase instance?
    Thanks,
    Ryan

    I did the install as PTH0RC and my inventory.xml is configured correctly, but I get the following message trying to run a simple view
    C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance>epmsys_registry view
    com.hyperion.hit.registry.exceptions.RegistryException: reg.properties not configured.
            at com.hyperion.hit.registry.Registry.getInstance(Registry.java:338)
            at com.hyperion.hit.registry.regedit.RegEditUtility.main(RegEditUtility.java:101)
    An error occured during the operation. Detailed Message is - reg.properties notconfigured.

  • Unable to register Essbase Server in Shared Service

    Hi,
    I am installing 11.1.1.3 version with the following setup
    Planning Server - Windows 2003 - Std. Ed. SP2 32 Bit
    Essbase Server - Windows 2003 - Ent. Ed. SP2 64 Bit
    Reporting Server - Windows 2003 - Std. Ed. SP2 32 Bit
    We installed and configure the Planning server with following components - Weblogic 9.2, Shared Services, Workspace, EAS and Planning on (32 bit EPM 11.1.1.3 version) and all the components are working properly.
    then, We install and configure Essbase with the following components - Essbase Server (64 Bit EPM 11.1.1.3 version). Essbase without registering with Shared Service is working fine with the EAS component, but when we try to register it with Shared Services it fails.
    Need your inputs to resolve the above issue. Also send the configuration steps to validate the same with our configuration.
    Regards
    Atul

    hi john,
    Everything is been done as part of installation and configuration. but while configuring ESSBASE SERVER, it fails to "register" with sharedservices.
    The interesting point here is that Essbase server in one machine is of 64-bit and sharedservices in another machine is of 32-bit.
    kindly let me know the possibilities that we can integrate an installation with a part of 64bit files in one machine and 32 bit files in another machine .

Maybe you are looking for