Basic Unit Change

Dear Sir,
I have maintain for some material Basic unit of measure as NOS in the material master and the issue of unit as KG.Now I want to change the basic unit of measure as M(Meter) for same item.Is this possible.If this how can I do this and what the T code will I use.
Regards
Amar Puhan
Note : Question is discussed widely in forum,please search forum before posting.
Edited by: Jeyakanthan A on Oct 9, 2011 11:34 PM

hi,
while chnaging the basic uint of measure in mm02 for the material, what is the error message it is giving you.
kindly give me the details for further processing.
Regards,
velu

Similar Messages

Change BASIC UNIT OF MEASURE

Dear All,
I want to change BASIC UNIT OF MEASURE of fresh material which stock is zero,no pr & po.
Path given by Performance Assistant is not solving the problem.
Please help me out.

hi,
while chnaging the basic uint of measure in mm02 for the material, what is the error message it is giving you.
kindly give me the details for further processing.
Regards,
velu

Org Unit Change Report

Hi,
I have an requirement, need to create report which specifies all the list of Org Units that are created and delimited during the given period.
The report has to display any changes for Org. Unit in HRP1000, HRP1001 and HRP1008.
Please suggest how to find out any changes occured for Org. Unit.
Standard report RHCDOC_DISPLAY needs to be used for Org unit change history report.
Regards,
Sunil

You need to maintain the Settings for "CHANGE DOCUMENTS" in the Config;
use this IMG Path :
Personnel management -
> Organization management -
> Basic Settings -
>Activate Change Documents
Execute the link Activate Change Documents and maintain all the settings as below;
Plan Version : 01
Object Type : S , O , (all the objects that you like to put )
Infotype : 1001 / 1008
Subtype : *
Active : Tick the check Box.
You need to create One line per Object type;
Ex :
01(Plan) S (OTYPE) 1001(ITYPE) * (STYPE) Tick Mark (Active)
Hope this would give you clarity.
Regards,
Anirban

Report for basic dates change in maintenance order

Dear friends,
Client requirement is to see the orders for which basic dates have been changed. The scenario is when preventive maintenance is done , if the work cannot be done on the date(basic date in maintenanc eorder), the basic date is changed for a convenient time. They want to have a report showing all the ordres for which the basic dates have been changed and the changed dates detail( ie. initial basic date, changed basic dates).
best regds
Arun

Once you get the Change Document header data from CDHDR you will then need to get the change details from CDPOS.
Have a look at program RSSCD200 via TCode SE38.
There may well be a suitable function module for this...
PeteA

Org unit changes but position not when emp move from 1 org unit 2 other

Hi,
We have a scenario in which when an employee moved from org unit to another (temporarily) his position doesn't get changed but org. unit changes. How to manage it???
Thanks in advance
Anand

Hi Naveen,
Let me expain the process in details when you enter "Position" in IT 0000 & 0001 in Emp. Master (PA30) it inherites Org. Unit, Org Key and Cost Center. To get inheritance of org unit, org key, cost center along with position you have to assign all to org. unit in PPOM.
I want "Position" to be remained unchanged when an employee moves from one org unit to other only organization unit need to be changes.
Please suggest
Thanks a lotttttttt

Function module for conversion in basic unit of measure....

Hi,
Can someone give me a function module, which will convert the Unit of measure into basic unit of measure
Say a a material has 3 CA (Cases) in a PO and the conversion factor(UMREZ in table MARAM) for CA for that material is 4 and converison for MP (Master pack) is 12,then
3CA = 9 PC = (9/12) MP
But I want a function module which will do this conversions ?

Hi,
Use MD_CONVERT_MATERIAL_UNIT
Thanks,
Naren

[svn:osmf:] 17080: Add basic unit tests for MulticastNetLoader

Revision: 17080
Revision: 17080
Author:   [email protected]
Date:     2010-07-27 16:03:01 -0700 (Tue, 27 Jul 2010)
Log Message:
Add basic unit tests for MulticastNetLoader
Modified Paths:
    osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
Added Paths:
    osmf/trunk/framework/OSMFTest/org/osmf/net/multicast/
    osmf/trunk/framework/OSMFTest/org/osmf/net/multicast/TestMulticastNetLoader.as

Basic unit of measure conversion

If one PAC needs to contain 10 units, what should the conversion table look like in the "additional data" screen of MM02?

hi,
If one PAC needs to contain 10 units:
conversion table look like:
X AUN Measurement unit text <= Y BUN measurement unit text
1 PAC Pack <= 10 (ST) Units
and
if for the material you maintained ( BUN) basic unit of measure as ST -- units, then one pacK = 10 units. if you maintained in KG then one pacK = 10 kgs.
hope this may help you,
Regards,
Srinivas

Error in el01 after MR unit change

Hi,
I need your help :
Partner with BP period 2011-01-01 to 2011-04-30.
An advance invoice has been made out with payment date 2011-02-28. Now BB plan is inactive.
Creating interim billing in 2011-03-05 (interim meter reading with billing)
MR unit change from 06.03.2011 (MR unit with BB cycle=0)
Error (el01) while creating MR order for installation (data: 20.03.2011)- interim with billing (02) ; message E9 035 'No objects
corresponded to the selection criteria'.
The only way is to do it with the device. Is there any way to do it for installaton?
From 2011-06-01 everything is OK. (for both)
Thanks.

Hi,
If you would like to enter the MR result with MR reason 02 - Interim billing, you do not need to create MR order. Just enter the installation number, date of MR. After that you can enter the MR results and save.
The MR order will be created immediately.
Best regards
Vlado

Unit change problems

Hello, how can I do to make the number change corresponding to the changed unit in the array?
For example, when I change the unit of "flow" to be L/hr, the value should appear from 4 to 240 in the data mainstream without adjusting the value manually. It should pop up automatically. I know how to change the unit but don't know how to make it appear in the data mainstream with the same numeric control block.
Solved!
Go to Solution.
Attachments:
unit change.vi ‏9 KB

You're going to have trouble because you can't have different units for the same control with an array of clusters. Another issue is that you're storing flow and pressure in the same array, so you'll have incompatible units which will break your code. Your approach of using unitless numbers is fine until, as you've seen, you attempt to change something a second time.
I think you'll need to detect which element in the array changed, then update the value for only that element.
See if this makes sense:
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Cons unit change at year end

Hi : )
when performing a cons unit change at the end of the year whereby the old cons group becomes unnecessary as no cons unit is part of it in period 1/2011, do I have to delete the cons group as well from the new hierarchy starting on the 1.01.2011 or do I just delete the cons units out of this old cons group?
Also, as we will have a new cons group and cons unit hierarchy starting from the 1.01.2011 will we not be having a problem displaying period 12/2010 data come January as the hierachy then used in the queries will only have the new structure, i.e. the moved cons units sitting under the new cons group??? Our queries are currently set up to select the hierachy using the default query date...
Your views would be very much appreciated.
Kind regards,
Tanja

Thanks Dan : )
The configuration document that I received mentions to deleting the cons unit in the 1st period following the consolidation group change. So because I am divesting the cons unit in period 12/2010 I interpreted that I can delete the cons unit from the old cons group in period 1/2011 including the old cons group as there are no more cons units within it.
But this will be causing us problems in January for period 12/2010 reporting as the new hierarchy starting on 1/1/2011 that is picked by the queries due to default query date will not be have the old cons group.
So I think by what you said to leave the cons unit and cons group until the year over year reporting is finished will solve our problem.
But here is the example anyway. Maybe there is a different way:
Cons unit A is the only cons unit under Cons Group A and is divested as at 12/2010
Cons unit A is acquired into a new never before existed Cons Group C as at 12/2010
So the currently valid hierachy is valid from 01.01.2010 - 31.12.2010 with Cons unit A now residing in 2 places
In period 1/2011 I deleted Cons unit A under Cons Group A and also deleted cons Group A.
This created a new hierachy that is valid from 01.01.2011- 31.12.9999
So in I am correct in assuming that if our queries use default query date that we will have a problem trying to report on period 12/2010 data in January?
Kind regards,
Tanja

To Change Basic Unit of Measure

Dear Sappers,
With refernce to my previous posted thread, below I am giving the detailed copy of *PERFORMANCE ASSISTANCE*
The Performance Assistance is giving me solution to proceed but for proceeding further is not possible. As max no of sessions are 2.
Also massege is generated by MM02 & solution given is also same MM02.
Please find below pasted Performance assistance.
The base unit of measure cannot be changed; choose "Display errors"
Message no. M3189
Diagnosis
You wanted to change the base unit of measure. However, you can do so only under certain circumstances, including the following:
If there are no stocks of the material in the current period and in the previous period
If there are stocks in the previous period, you can clear them as follows:
a) Post the stock in the previous period to the current period (for example, using movement type 561) so that the stock for the previous period is the same as the stock for the current period.
b) Clear the stock with the posting date in the previous period (for example, using movement type 562).
If no purchase requisitions, purchase orders, or scheduling agreements exist for the material
Procedure
Choose Display errors to see why you cannot change the base unit of measure for this material.
The pushbutton Display errors appears only in dialog mode, not in data transfer or in mass maintenance. If this message appears in data transfer or in mass maintenance, and you want to know why the base unit of measure cannot be changed, access the material in dialog mode using the relevant transaction below, try to change the base unit of measure as required, and then choose Display errors:
Industry
Proceed
Retail
Proceed

Dear Friend,
Please do the following:
1. MM02 + material number, select basic view 1
2. Change the BUoM + press enter
3. A button called 'Display error' will appear between the description of the transaction and 'basic view 1' tab. ( left from 'Additional data' button ) > please click on it
4. Examine the message
If you have question please come back!
BR
Csaba

Handling Unit Change Document does not exist

I have created a Handling Unit and made changes to the Handling Unit. When I go into HUMO > GOTO > Chnge docs, the screen is blank. Further to this if I display the status of the Handling Unit, the change documents is not ticked. Basically, I would like to see all change documents relating to a Handling Unit. Your assistance is appreciated. Txs Poobie

Hi,
You've checking the @ correct place to see Change Documents but why you're not able to see those ?
Are you sure that you've changed HU?
Check if any 'Data Changed' exists in Tab-General Info of HU. If any Changed Date & By exists, then it should display in Change Docs.
Revert back.
Regards,
Anup

Problem with Org Unit Change

Hello Experts.
We have a problem here.
There is an employee say : X in position ABC which belongs to Org Unit XYZ.
Now, there is a change in the Org Structure. The postion has not changed, the employee belongs to the same position. But the Org Unit has changed to PQR and has a new chief.
The problem is, in the SAP Portal, the Organization assignment is picking up the Chief of XYZ instead of the new chief.
What could be the reason for this?
Regards
Avik

Hi Avik,
Check dates on records for ABCu2019s A|003 relationship to PQR and chiefu2019s A|012 relationship to PQR. Maybe the old records were not delimited and hence they are getting picked up.
Donnie

Consignment Deliveries: Handling Unit Changes to Non Assigned HU

Hell Experts,
We are having an issue with the consigment deliveries. After doing the PGI, the handlling unit assignment changes to Non Assigned Handlling Unit.
Situation Before PGI:
VEKP-VBOBJ = 01
VEKP-VBOBLKEY = <Delivery Number>
After PGI: (Movement Type Used is 631)
VEKP-VBOBJ = 12 (Non Assigned handlling Unit)
VEKP-VBOBJKEY = <Delivery Number>
The handlling unit is assigned to the delivery but the field VBOBJ changes to 12. We could see the handlling unit in the delivery but the assignement is not 01. Logically, the field VBOBJ should be 01. (Because we are able to see these HU in delivery).
If I reverse the PGI, then VBOBJ again changes to 01. Also, if I pack all the material into one HU and leave another HU empty then after PGI, VBOBJ for empty HU is 01 but for packed HU it is 12 (with VBOBJKEY = Delivery Number)
I don't know why the assignment is 12? Are we missing anything?
Thanks,

are u already solved this issue ? can u please tell me how to solve it ? and I why the assignment turns into 12 ?
thanks
regards
Henny

Basic Unit Change

Similar Messages

Maybe you are looking for