Basic URLs of adapter engine associations properties are missing
Dear all
We are running on the nw 7.11 pi version.
And we recently enabled the ssl on the system.. we have HA in place with web dispatcher.
We updated the exchane profile parameter with all ssl n required parameters.
CPA cache refresh is working fine.. but. While doing the Intergration server ABAP cache its failing.
And we checked the sap note 1678104 under the XRIA assoctiation and as well as under the Basic urls of adapter engine "Secure URL" properties are missing . Since we r not able to update this property.. the adapter engine is still ponting to http url instead https.
Please see the screen shot.
Regards
Manoj K
Hi Agasthuri,
yes, maybe something gone wrong in the post install, I will ask the guy which did the installation of the PI. Therefore I didn't have the logon data for performing a cache refresh, but in the log entries it seems that this is working properly.
Hi Praveen,
in Communication Channel Monitoring (In PI this is no longer found under Adapter Monitoring), I can see that the messages are delivered, but I can't see the Audit Log entries there.
I checked the MDT, but there are also no messages displayed.
End-to-End-Monitoring seems to be a good solution, but it seems that it is something configured wrong in this installation I will try to get the guy which cares for Basis to look after it.
Best regards,
Daniel
Similar Messages
-
Reg Unable to find URL for Adapter Engine Error
Hello,
During execution of a scenario, i am getting these errors in sxmb_moni:
AE_DETAILS_GET_ERROR
3: Unable to find URL for Adapter Engine af.xip.poecspxioo4
Error when reading the access data (URL, user, password) for the Adapter Engine.
Seems like it is a problem of XI Server unable to locate the Central adapter engine due to some parameter not set properly.
So, what are the points we can check while installation of XI so as to rectify this problem.Hi all,
I got the similar error in my scenario and i solved the same.Actually i ma not pretty surte this will solve your problem.
In my case proxy generation settings was mis configured in the sender system. so its caused the reason.
I made an entry in the SPROXSET table and i did other activities like RFC and application system also.
Then its worked for me. Its not matching with your case please do ignore this one
Regards
Vijay -
No_messaging_url_found: Unable to find URL for Adapter Engine
Hi,
I am facing the same problem. I have configured a RFC-File scenario.
I get the error"no_messaging_url_found: Unable to find URL for Adapter Engine af.<SID>.<server>"
and <INTERNAL.AE_DETAILS_GET_ERROR>
I get the error "no_messaging_url_found: Unable to find URL for Adapter Engine" when I execute the Function Module SAI_AE_DETAILS_GET.
This error occured in the line 235( sap_xi_adapter_services = sld_accessor->associators( iref = sap_xi_adapter_framework assocclass = 'SAP_HostedXIAdapterServi) of the FM.
The value is not filled and i get the error mentioned.
I have gone through thread and verified all the points mentioned.
I have checked SXI_CAHCE,there are no locked users in RSUSR200,
SXI_CACHE, Goto->AdapterEngine Cache, I have an entry af.<sid>.<server>
In SLD,Technical Landscape,Exchange Infrastructure I have the entry <SID>.<Server> against the Adapter Engine
But as was mentioned in the thread the line 241 of the Fucntion Module has 'adapterType' and not 'Adaptertype' as in the exchange profile.I did not try changing 'a' to 'A'.
Could you please let me know how to solve the problem.
Thanks in advance.Hi Vani,
Check the pipeline URL in the SLD
Business System->URL
It should be
http://host:HTTPport/sap/xi/engine?type=entry
Just check this thread- may be useful-
File Adapter - Sender Problem
RFC adapter - AE_DETAILS_GET_ERROR - no adapter engine
https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
Hope this helps,
Regards,
Moorthy -
Unable to find URL for Adapter Engine af.xid.xidev ?
Hi,
I have scenario.
Abap proxy -
> ccBPM -
> RFC (synchronous).
The error happen for ccBPM -
> RFC
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.xid.xidev</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any idea for what happening ?
Cheers
FernandHi.
Have you tried with this
Re: Wrong Adapter Engine on RWB?
Regards
Seshagiri -
Unable to find URL for Adapter Engine
Hi,
We have installed the XI 7.0 and I have realized a simple scenario "File > XI > File" in order to validate the installation... and on has a dump around Adapter Framework.
Inside SXMB_MONI, on has the following error:
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xid.bcnssap006</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xid.bcnssap006</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.xid.bcnssap006</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
It's probably a problem with aii but which one ?Hi Mickael,
The problem that you are facing looks like it is unable to connect to the adapter engine itself, please check the following:-
The userid being used must have the authorizations of group SAP_XI_APPL_SERV_USER on the Integration Server.
*During the configuration of the adapter (From Help documentation):-
<i>Specifications for the Integration Engine
Enter the complete address (URL) of the Integration Engine that you want to send the message to:
XI.TargetURL=http://IntegrationEngineHost:port/pipeline-arguments
This specification is mandatory.</i>
One suggestion:- Please try the following and see if you are still facing the problem, this might help you in decreasing the number of places to verifyconfigurations!
Again, from help:-
<i>The Integration Engine address can also be accessed dynamically from the SAP System Landscape Directory (SLD). The following entry is added to the configuration for this purpose:
XI.SLDConfiguration=SLDaccessor
In this case the URL of the corresponding Integration Server for the system specified with XI.SenderService is read from the SLD and used instead of the value specified under XI.TargetURL. Therefore, specify the following:
XI.TargetURL=<fromSLD>
To be able to access the SLD, the SLDaccessor service must be configured correspondingly and the respective entries must be maintained in the SLD.</i>
Hope this helps!
-Sushumna -
Error : Unable to find URL for Adapter Engine
Hi Experts,
I have searched several forums , but i am not clear on how to resolve this error.
I am using XI 3.0, my scenario is File->XI->File
I am getting this error in SXMB_MONI.
*Can any body suggest me a clear step-by-step procedure to solve it.*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Message canceled
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xd2.host-dev</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xd2.host-dev</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xd2.hydrus-dev</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
saiHi Debashish,
Thanks for ur reply,
I have executed
--->Execute SAI_AE_DETAILS_GET from se37
>Enter AE name:<host>.<systemid>
After executing, i got these param
Exception NO_ADAPTER_ENGINE_FOUND
Message ID: SAI_GLOBAL Message number: 016
Message:
no_adapter_engine_found: Unable to find Adapter Engine host-DEV.XD2
Exchange profile parameters are like this
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
and i dont have authorizations for SU01 fro lock/unlock.
Any suggestions how to proceed.
Thanks
Sai -
Decentralized/Standalone XI Adapter Engine in same SID as Central AE
For reasons of splitting functionality, we want to setup separate XI adapter engines (AE) so that we can "pin" certain communication channels to specific AE.
On top of the "Central" AE (installed in /usr/sap/<SID>/DVEBMGS39), I have now installed a second ABAP/J2EE dialog instance (in /usr/sap/<SID>/D89).
All the Java components and services are visibile in VisualAdmin.
D89 shows up in SLD, and the J2EE SLD Data Supplier in D89 works.
However, there seems to be no "separation" of the 2 instances of the AE:
In RWB, component monitoring, there are no entries under "Non Central Adapter Engine" (although it is visible as a second node in Adapter Monitoring/MDT)
In IB/DIRECTORY, only the "Integration Server" is visible as an "Adapter Engine" in the communication channels
In the SLD, the class "HTTP Service Port: Basic URLs of Adapter Engine on <hostname>" only shows 1 URL (pointing to D89 and not to the "central" DVEBMGS39l).
To me it seems the 2 J2EE instances (within the same SID) behave as 1 (just like if we added another server1 to the same J2EE instance).
I think the main problem is within the data of the SLD. Does the separate "Adapter Engine" need to be registred manually (for example by creating an additionale instance of the CIM class "SAP_XIAdapterFramework" ?
System has been restarted many times.
Has anybody setup a separate adapter engine this way ?
Thanks for your help
Kind regards,
Jan Van AchteDear Jan
did you find a solution for your problem ? i got the same problem and did still not find a solution in sapnet.
regards peter -
URL for Central Adapter Engine
Hi,
It seems like our XI Server is unable to locate the Central adapter engine for doing an outbound RFC call. I am trying to call an RFC using the RFC adapter, and getting the following error:
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.nw4.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.nw4.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.nw4.netweaver</SAP:Stack>
Where do we maintain the URL of the adapter engine ?
thanks,
ManishI have the same problem since we changed the name of the database server - the server name reported in the error is the old name. I've checked all the properties in this thread, plus follwed through OSS note 764176 with no luck. All the properties reflect the new name, but testing the proxy (SPROXY) still fails with the error:
<CODE>INTERNAL.AE_DETAILS_GET_ERROR</CODE>
<ERRORTEXT>Error when reading the access data (URL, user, password) for the Adapter Engine af.xix.sapsbxcrmdb2</ERRORTEXT>
sapsbxcrmdb2 is the old database server name.
I found one location where this is displayed - in transaction SXI_CACHE (in the client of th integration server), Menu option GOTO -> Adapter Engine Cache. The column 'Adapter Engine Name' reflects the incorrect name. Where is this property stored?
I cleared this entry manually by selecting the row and clicking on the trash can icon. Later it was refreshed properly.
-Mike
Update: I found that the SOAP Reciever channel in my Integration Scenario had a hard-coded entry pointing to the old integration server name in the property 'Adapter Engine'. I changed this by selecting the 'Integration Server' in the drop down. This changed the error behavior (still doesn't work, but the above errors went away).
-Mike
Message was edited by: Mike Hatch
Message was edited by: Mike Hatch
Message was edited by: Mike Hatch -
Error while reading access data (URL, user,password) for the Adapter Engine
Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
BalajiIt looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro -
RWB-Adapter Engine-Monitoring calling url of shorthost name
Hi,
I am familiar with where to set the domain name or short names for XI within the various connection settings
in the Exchange Profile. Does anyone know where the adapter engine monitor settings are stored? We are suddenly getting errors for http://host:52100/mdt/AmtServlet but if I put the FQDN in a new browser window it works fine. But the developers
here are unable to post to the adapter....
Thanks so much in advance...
JimHi James,
FQDN is essential not only for RWB but for other components of WAS as well. Launch XI page wiht sxmb_ifr and check if it displays FQDN. Else follow the complete FQDN activation procedure as below.
1. In RZ10, add the parameter icm/host_name_full in instance profile.
2. Restart your system and follow note 764176 for changing SLD associations. This is important.
3. For adapter engine, apply note 804124.
Follow the complete procedure.
Regards,
Youvraj -
Messages got stuck in Adapter engine
We are doing http to RFC sysnchronous scenario
Message got stuck in adapter engine.so we are getting 500 HTTP timeout error in Http client.
Please help us to find why messages got stuck in Adapter engine.
Below Adapter engine audit log message is pasted for your reference.
Audit Log message:
Time Stamp Status Description
26.09.2008 06:33:54 Success Message successfully received by messaging system. Profile: XI URL: http://devsap01:51000/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
26.09.2008 06:33:54 Success Using connection RFC_http://sap.com/xi/XI/System. Trying to put the message into the request queue.
26.09.2008 06:33:54 Success Message successfully put into the queue.
26.09.2008 06:33:54 Success The message was successfully retrieved from the request queue.
26.09.2008 06:33:54 Success The message status set to DLNG.
26.09.2008 06:33:54 Success Delivering to channel: RFC_out_Test
26.09.2008 06:33:54 Success MP: entering
26.09.2008 06:33:54 Success MP: processing local module localejbs/RfcAFBean
26.09.2008 06:33:54 Success RFC adapter received a synchronous message. Attempting to send sRFC for ZFTestRFC
26.09.2008 06:33:54 Success RFC adapter received a synchronous message. Attempting to send sRFC for J2EE_GUEST
ime Stamp Status Description
26.09.2008 06:56:15 Success MP: leaving
26.09.2008 06:56:15 Error Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.MessageExpiredException: Sync application request expired.. Setting message to status failed.
26.09.2008 06:56:15 Error The message status set to FAIL.
26.09.2008 06:56:15 Error Returning synchronous error message to calling application: com.sap.aii.af.ra.ms.api.MessageExpiredException: Sync application request expired..
Kindly advise us on this issue.Hi krish,
when i send a http request it got stuck in adapter engine with status "delivering" for some time....
We found that RFC got successfully executed in R/3 system but the synchronous message is not delivered to PI.since adapter engine message is having status "delivering"
after some time we got adapter engine message status as "cancelled with error"
Error is Message expired exception which you can see audit log message I have pasted in my previous post.
Meanwhile we also got HTTP timeout error in Http client.
Could you please tell me why it got stuck in Adapter engine with status "delivering" since RFC is executed successfully.
Why we are not getting synchronous message reply back to PI? -
Adapter vs. Adapter Engine
What is the distinction between an adapter versus the adapter engine? How are the 2 related?
Also, what is the process flow of a message?
Step 1. Adapter
Step 2. Integration Engine
Step 3. Adapter
What are the steps in between? I am trying to put together a diagram of a message flow in XI. Any help is appreciated!Hi Daniel -
<i>>>>1. The Integration Server contains the Adapter Engine and Integration Engine.</i>
Yes, Integration Server is pretty much synonymous with "XI". It also houses/contains the Business Process Engine (e.g. for ccBPM).
<i>>>>2. Adapters run on the Adapter Engine.</i>
Basically yes.
If you have access to the SAP Service Marketplace, there's a good presentation on <a href="http://service.sap.com/~sapidb/011000358700004078552003E/PIAdapterFramework.pdf">Adapter Framework and Adapter Strategy</a> that includes a good architecture diagram that might clear some things up.
Regards,
Jin -
Adapter engine missing in the comm channal configuration
Hi Experts,
I am creating a File-IDOC scenario. While doing the configuration for the sender communication channel for file adpter the integration server is missing in the adapter engine drop down.
But when i checked for other adapter type like Idoc and Http adapter, the Integration channel is available in the adapter engine drop down(only for these two apater type only, for other adapters also i am not getting the integration server).
Can anyone help me regarding this, how to resolve this problem.
Any SAPnotes or blogs for that.
Help will be apprediated and rewarded as well.
Thanks
Manishahi manisha,
check the previous reply....the blog is nice
and also check the note 764176
check below
1. Open the "Content Maintenance" view under "Administration" in the SLD editing interface. (in 7.10: the view "CIM Instances".) Select "XI Integration Server" from the drop-down menu and navigate to the associations of the integration server. Select the "XI Integration Server Logical Identity" association and delete the association by pressing the 'Remove' button.
2. Switch to "Home" in the "Technical Landscape" view, and select the "Exchange Infrastructure" technical system type there. (as of 7.10: "Process Integration".) Select all domains and XI components for the host and delete these by selecting them and pressing 'Remove'.
3. Start the J2EE server. After you restart the server, the XI components log on to the SLD again and create a new entity of the "XI Integration Server" class.
4. To register the directory and repository again, you must also log on to the two tools.
5. Under 'Technical Landscape' in the SLD, select the "Exchange Infrastructure" technical system type. (as of 7.10: "Process Integration") and check whether all XI components (Adapter Engine, Integration Directory, Integration Repository, Integration Server and Runtime Workbench/RWB) are logged on correctly. The Adapter Engine component may be missing. In this case, start the registration of the Adapter Engine as described in Note 1031321, step 2.
6. Change again to the administration interface --> Content Maintenance (7.10: "CIM Instances") to the associations of the XI integration server.
Create a new association by pressing the 'New Association' button, select the "XI Sub-System viewed Application System" associations type here, and, in the next step, choose the BC system for the Integration Server. Save the association by selecting 'Associate'.
Create a new association by pressing the 'New Association' button, select the "XI Integration Server Logical Identity" association type here, and, in the next step, choose the business system for the Integration Server. Save the association by selecting 'Associate'.
7. Under 'Technical Landscape' in the SLD, select the "Exchange Infrastructure" technical system type. (7.10: "Process Integration") and check whether the association to the application system is displayed there (in column "Application System", the business system on which the integration server runs should be displayed).
8. To make the changed associations known in the directory, the SLD temporary storage must be deleted in the directory. To do this, log on to the Integration Directory and select the 'Environment --> Delete temporary storage areas for SLD data' menu option.
reward points if helpfull
regards
kummari
Edited by: kummari on Jul 10, 2008 8:42 AM -
Error when reading the access data for the Adapter Engine
We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.xpd.dbcixpd</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Pls suggest if anyone has gone thru same problem.
Regards
AmarI got the same problem while using RFC lookup.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.tx1.netweaver</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any idea ,when we get this error usually. -
Delay of Message in the Adapter Engine when put into queue
Hi XI/PI Experts,
We are having problems in the Adapter Engine wherein messages are staying longer in the AE queue as usual. Sometimes, it stays longer in Delivering status also. Is there any way we can monitor and try to push the message out of AE to avoid delays? I know we can do this in the ABAP side (Integration Engine)...but how can we do this in the Adapter Engine?
See below sample logs in AE RWB:
2008-07-17 13:28:13 Success Using connection SOAP*****. Trying to put the message into the receive queue.
2008-07-17 13:28:13 Success Message successfully put into the queue.
2008-07-17 13:34:12 Success The message was successfully retrieved from the receive queue.
2008-07-17 13:34:12 Success The message status set to DLNG.
As you can see there is a gap of 4 minutes.
Hope you can help me. Thank you so much in advance.
GraceHi.
Thanks for your answers but the messages are not set into EOIO but just EO. So the messages are not ending up in Holding Status.
I also believe that issue is not occurring because of too many messages in error in AE nor because of the receiving system is down. Issue is happening when message is about to be sent to the SOAP communication channel in AE. As you can see in the sample log I provided above, in RWB AE, after the message was put into queue, it took several minutes to be delivered to corresponding comm channel. My questions are:
1. Is there a way we can monitor the queue in AE like the way we monitor the queue in IE? (e.g. smq1 and smq2 transactions) .
2. If there is a way, how are we going to intervene manually on the queues in AE? (we can intervene with smq1 and smq2 in IE)
3. For messages with Delivering Status in AE, sometimes it is taking hours to move to "Successful/Delivered" Status. Is there a way we can intervene with that? I believe we can resend messages with "System Error" Status and Staus "To be Delivered" but for status "Delivering"...it is not possible (from what I know -- I hope there is a way).
I look forward to hearing from you guys/gals.
Grace
Maybe you are looking for
-
I really need this fixed its driving me crazy. I wish iTunes had a way of taking all the songs from the iPod and just downloading them to the itunes without having to delete all that is on there. I really want my Purchesed Items back. I wasted probab
-
Hi all, I often do sound fx for a local theatre group as was wondering if i could use my ipad to play the sound fx instead of lugging my laptop around. Anyone know of any apps that would serve me? The app should allow me to recall any programmed soun
-
Hi everyone, I have some confusion as far as the proper resolution for graphics... As far as I know, 4:3 is not 720x480 yet a 4:3 DV video is 720x480.. so I am confused. My question is, if I were going to create a background in Photoshop for FCP.. Wh
-
CS5: Print thumbnails, 7x7 per page limitation + master labels
I'm testing InDesign CS5 and I have two questions regarding the "Thumbnails" option of the Print window. 1. Is there a way to define a greater number of thumbs per page? I'm working on a 500+ pages book and I'd like to be able to print more than 7x7
-
Hi all, Our RAC site has 5 nodes on SuseLinux . It's running smooth since 2009 . Suddenly , Power failure for Node5 , and then all other nodes reboot at the sametime ! It bursts out usually while UPS is out -of service . Everytime , one node down and