Basic web plan -- how to handle email ?

Since we get 5 basic web plans included in our membership, what are some best practices
when handling email responses -- at no additional fee?
example:
domain name: www.websitename.com
email address: [email protected] is not available in the basic plan
What are some solutions people use?

Hi,
You can use an external email provider to handle the email for your site. Even if the email provider is external, you can keep using email addresses based on your domain name. To Set up an external email provider, please refer to the link below
http://helpx.adobe.com/content/help/en/business-catalyst/partner/set-email-external-email- provider.html
Hope it Helps

Similar Messages

CTM Planning: How to Handle Min Lot Size Daily Resource Capacity?

Hello,
I am facing a situation where the Min Lot Size values require more than a days capacity of the Resource.
Finite Planning CTM is skipping all demands.
Example:
Daily Resource Availability = 24 Hrs,
Capacity Consumption per PPM = 1000 Kgs / 1 Hour.
Min Lot Size = 50,000 Kgs
Capacity requirement for the 50,000 Kgs = 50 Hrs
Is there a way CTM can plan this?
Thanks,
Ran

Yes the time buckets in CTM profile has nothing to do with this limitation...
Nor does the infinite/finite setting.
Basically its a limitation of how the resources are stored in livecache.
You can not exceed the capacity for which the resource is stored...
The only workaround is to define the resourcde in weekly time buckets by manually defining a capacity profile.
I don't like this as every order will take a week...
I am not aware of any other workaround...
I have seen other clients take out the minimum lot size for SNP, then when cif transfer the order back to R/3, it is combined to 1 large order...
Ken Snyder

SAP Idocs -How to handle response from target system

Hi,
I am working on a scenario in which I will send Idocs asynchronously from SAP thro a SOAP adapter to a webservice deployed on the target system.
After the Idoc data is posted in the target system,the target system will send the acknowledgement for the receipt(basically response message).How to handle this scenario?
SAP Idoc( outbound asynchronous)---> SAP XI3.0(soap adapter) ---> Target system(inbound synchronous)
Do I need to go for BPM to handle this situation?
Is there any alterantive to BPM.
If any of the forum members who have worked on the similar scenario could help me in finding a better solution,I will be thankful to them.
Thanks,
Leo

Hi Udo,
Thanks for the info.My scenario is like this.
SAP R/3 Idoc -> SAP XI 3.0 <-> Webservice in the target system.
The webservice in the target system will receive the Idoc as a request messsage and send a response message synchronously.
Since Idoc is sent asynchronously( I believe Idocs sent from SAP are always asynchronous),there is no Proxy waiting in SAP R/3 to receive the response message from the target system.
If I go for BPM for the above scenario,will the BPM steps look like the following.
1)Receive Idoc from SAP.
2)Send Idoc sysnchronously to webservice
3)Receive the response from the webservice synchronously.
4.Post the response message to a proxy which can handle it further in SAP R/3.
Please note that my knowledge in BPM is limited and correct me if I am wrong.
Thanks in advance
S.Banukumar

How to handle exceptions in web dyn pro

Hi Frndz....
Can any one kindly xplain how to handle exceptions in web dyn pro..like we hav exceptionhandling in java ....so is there any for NWDS
THANKS & REGARDS
Rajesh

Hi,
Web Dynpro Java is basically java only.i.e You program in java. Hence exceptions are supported in the same way as in java i.e. via try,catch and finally block.
Additionally,
In 04/04s if you create a method in any controller in web dynpro you cann't specify exception that can be thrown in the method. This is now possible in new programming web dynpro model in CE.
Hence when creating a method you can also specify custom or core java (lib)excetions.
Regards,
Ashwani Kr Sharma

How to handle multiple datasources in a web application?

I have a J2EE Web application with Servlets and Java ServerPages. Beside this I have a in-house developed API for certain services built using Hibernate and Spring with POJO's and some EJB.
There are 8 databases which will be used by the web application. I have heard that multiple datasources with Spring is hard to design around. Considering that I have no choice not to use Spring or Hibernate as the API's are using it.
Anyone have a good design spesification for how to handle multiple datasources. The datasource(database) will be chosen by the user in the web application.

Let me get this straight. You have a web application that uses spring framework and hibernate to access the database. You want the user to be able to select the database that he wants to access using spring and hibernate.
Hopefully you are using the Spring Framework Hibernate DAO. I know you can have more that one spring application context. You can then trying to load a seperate spring application context for each database. Each application context would have it's own configuration files with the connection parameters for each datasource. You could still use JNDi entries in the web.xml for each datasource.
Then you would need a service locater so that when a user selected a datasource he would get the application context for that datasource which he would use for the rest of his session.
I think it is doable. It means a long load time. And you'll need to keep the application contexts as small as possible to conserve resources.

Certain web sites try to open a tab for billing or other info. fire fix 3 worked fine , 4 & 5 bring up a box asking how to handle a aspx file and nothing will work. am running XP service pack 3. how do I reload 3 again?

with firefox 3 everything works fine. with 4 and 5 when I try to complete billing info I get a question about how to handle aspx files. nothing works. all I get is a new tab with a blank screen, not data no nothing. When I loaded firefox 4 and had the problem I reinstalled 3 to solve it. I hoped when 5 came along it would include a fix, no such luck. I read many questions about AOL logon that is the same as my problem and have tried all the suggestions with no luck.

What are you expecting when the aspx window comes up, a PDF or a regular web page?
Here's the process to roll back:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (it usually worked with Firefox 4) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

Does the unlimited email/web plan give us access to the 3G network?

since i got the unlimited email/web plan will i be able to access the internet wherever i go over the 3G network? and I also, like many could not transfer my upgrades within the family plan, very disapointed, dont look forward to the hassle of calling verizon and having them switch the phone numbers to what i want them to be when i finally get the iphone.

alright thanks, i was confused when they gave us the option of the data plan and a wireless network plan. thanks though. im upset that i couldnt transfer upgrades from one phone to another on the same family plan, so ill have to deal with switching the number. hopefully thats not too much of a hassle.

In my planning application.I have 100 members in account dimensions.Those members are used in 100 forms.suddenly my bussiness was changed.so i want replace those 100 members into new name of 100 memebers.but how i can chnage in 100 forms.how to handle

In my planning application.I have 100 members in account dimensions.Those members are used in 100 forms.suddenly my business was changed.so i want replace those 100 members into new name of 100 members.but how i can change those 100 members in 100 forms.how to handle this?

Hi joshi and jharvey,
Thanks for you are reply.I am new for this lcm.Can you explain detail.about above problem.I mean in share service i didn't find any export option.I had seen only migration.or share any blog for detail about lcm.

How does the email program in the suite compare with Google GMail especially in handling spam or are both about the same?

How does the email program in the suite compare with Google GMail especially in handling spam or are both about the same?

Firefox doesn't include an email client. Are you asking about the Seamonkey suite? The Seamonkey support options are over here: http://www.seamonkey-project.org/community

In the Suite, how does the email portion handle spam?

In the Suite, how does the email portion handle spam?

Every email message you mark as spam (and also mark the ones that aren't spam that went in to your junk folder) helps it learn over time.
If you want more (extremely) technical information about it: http://en.wikipedia.org/wiki/Bayesian_spam_filtering

Using my gmail account how do I forward a web site/page to an email recipiant

My mail account is with Gmail and I want to forward a web page to a an email account, but when I attempt this with Fitrefox it defaults to Outlook which I do Not wish to use.

See this - http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

How to Setup Email Text Boxes Directly on Site?

Can someone help me with terminology to search for how to setup a Web page where visitors can suscribe to a news letter by typing in their information into "live" text boxes, and click on Send so it emails to my contact mail address?
Once I know the terminology, I am sure it is a very basic question...
Golive 8.01

Hi:
What you are talking about is building a "form". What you have posted is a sample of a pre-built form and a service that offers free coding, or will go the next step for you and install a functioning form for you.
Golive has what you need to build forms on your own - it has all the text fields, radio buttons, submit buttons etc. available, and any book about whatever GoLive version you have (including the online HELP) will have step-by-step instructions on how to do the building on your end.
The tricky part comes with making the form actually work. GoLive can only build the form page with all the fields and buttons, etc. but processing a form requires a server, and coding has to be added to your page that directs the page to interact with the server and process the form.
Different servers (i.e. different hosting companies) handle forms differently. Some use cgi scripts, some use php scripts and occasionally other types. Some companies have prefab forms setup for you, similarly to what you posted from FreeContactForm, with good directions on how to make the scripts work with your forms. Others have prefab forms and poor directions or no directions on how to make the scripts work with your form. Other companies tell you you're on your own altogether.
I'm from the design side of the world and doing forms was quite intimidating for me originally. It doesn't intimidate me anymore but it's usually a minor pain in the a$$. Depends on the hosting company. Some have instructions that are clear and easy, etc. Others, not so much.
What I generally do is start by contacting the hosting company Tech Support and asking how they handle forms. They may direct me to their prefab stuff, often accessible through an ADMIN portal, or they'll tell me to go find my own script, or whatever. Depending on what they offer I'll take a look and if I have questions I'll call them back or not.
Basically with forms you have 2 key things to grasp. What coding do you need to add to your web page? And do you need to address any kind of separate document? Sometimes there will be a script page that resides on the server (in a cgi-bin, or php folder, or on the root) that you would need to open and add something to. In your web page itself you always have to add something to the form part of the coding, but sometimes you add something to your head code as well. It just depends on the script involved.
Generally you need to provide the email address that the form results will be sent to, a URL for a "Thank You For Subscribing" (or whatever) page that will appear after the person hits the "submit" button, or other page you want to appear (maybe you just have them go back to the homepage on the website, or you send them to a default "your form has been submitted" page that the script will generate if you don't provide a URL. Thats ez, but the pages are usually ugly and won't match your site at all.). Also, you usually have options to provide a Subject Line for the email that will be generated so that the receiver knows that the email is from the form, etc.
FreeContactForm appears to be offering to just handle all that for you and you can certainly go that route. When I first tackled forms I needed a programmer buddy to help understand what the heck was going on - you'll probably need someone to help you. But it IS good to learn to understand the basics because, if you build websites it's going to come up over and over. And it's good to learn to work in source code at least to some extent, because that will come up too.
But if you're building something for fun now and aren't going to do this a lot, you probably don't need to hassle with it.
Hope that helps and good luck!

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

Basic questions about the CM handling of Photoshop

I have some basic questions how Potoshop handles colour management. Most probably this has been discussed many times before, but frankly, the manual is pretty poorly written on this subject. I do understand the principle of colour management pretty well, but am not sure whether I understand what Photoshop is doing. So could somebody please comment whether my reasoning is correct or not.
Let's assume my monitor is calibrated and its profile loaded in OSX's monitor preference panel. Let's further assume I'm working strictly in RGB.
Is the following correct:
• When I open a picture which has an embedded profile, then Photoshop first calculates the "true" values from the embedded profile (whatever this means) and from this point the screen representation based on the profile which I defined in the system pref pane. So the screen representation remains always the same, regardless of the embedded profile (besides some possible conversion artefacts, especially on the edges of the colour space).
• The same holds true in the opposite direction, so when I work on that picture on screen, then no matter which RGB space I pick as my working space, the result will always be exactly the same (except those aforementioned artefacts).
• Hence it doesn't matter which RGB colour space I choose as my working space, it could be sRGB, Adobe RGB, "my own wild profile", whatever, the results are always the same. Of course the RGB values will differ, but this will be compensated by the embedded profile.
• Yet the theoretically best working space is the colour space of my monitor, because this minimizes possible artefacts.
• When I "convert" the picture from one profile into an other, then not only that new profile is assigned and embedded, but also the RGB values are recalculated accordingly, so that the result will remain the same. For example, I could first "convert" a picture from the camera space to my monitor space, then work on it, and finally "convert" it to sRGB before uploading it to a web site.
• When I "assign" a new profile, then a new profile is simply assigned and embedded but the RGB values are not adjusted. So the RGB values remain the same, but because a different profile is embedded, the picture will actually be changed. Since Photoshop will recalculate the screen representation based on that new profile (and the monitor profile), I will see this change on the screen. (This action doesn't make much sense, except maybe to simulate the possible outcome on a system which misinterprets the profile, e.g. assumes sRGB.)
• And finally, when I leave the picture untouched but change the monitor profile in the system pref pane, then of course the picture will not change, but its screen representation will change, because Photoshop uses that profile to calculate the screen representation. (This action makes even less sense, of course.)
Have I understood? Then I have two final questions:
• When I open a RGB file without any profile in it, what does Photoshop assume? How does it calculate the screen display? What does it do if I "convert" such a picture or "assign" a profile?
• If I select in the colour settings as working color space the monitor space, then the colour managment rule for RGB changes to "Colour management off" and can't be changed to a different value. I don't understand this.
Thanks for your patience.

• Yet the theoretically best working space is the colour space of my monitor, because this minimizes possible artefacts.
No.
(Edit: Any one screen usually has to be considered incidental, changing and transient and is not the target-medium, so it makes little sense to work based on its specific limitations.)
• When I open a RGB file without any profile in it, what does Photoshop assume? How does it calculate the screen display? What does it do if I "convert" such a picture or "assign" a profile?
If one opens an unprofiled file, Photoshop treats it as if it had the profile selected under RGB-Working-Space embedded and calculates display and conversion on that basis.
(Edit: And that’s the danger of unprofiled files – they would look different if someone edited them who used a different Working Space.)
Assigning such a file a profile is no different from assigning a profiled image a different profile – the RGB-values remain unchanged, the »key« for interpreting them changes and subsequently it will be displayed differently.

How to use email function in crystal report ?

Post Author: kudo
CA Forum: .NET
Hi I'm a novice by touching .net not more than 2 months. Can somebody guide me how to use email function provided in crystal report components?(Better put a sample code so that I can understand well.) ps: I'm using VS2005 VB.net.Thanks.

Post Author: mewdied
CA Forum: .NET
'EXPORT to EMAIL        ''' Code for exporting the report to Mapi (.Net Windows application)        ''' *For a Web application you must export to disk as a PDF file first.
        crReportDocument.Load(Application.StartupPath + "\World Sales Report.rpt")        crMicrosoftMailDestinationOptions = New MicrosoftMailDestinationOptions        With crMicrosoftMailDestinationOptions            .MailCCList = "[email protected]"            .MailToList = "[email protected]"            .MailSubject = "Attached exported report"            .UserName = "admin"            .Password = "password"        End With
        crExportOptions = crReportDocument.ExportOptions        With crExportOptions            .DestinationOptions = crMicrosoftMailDestinationOptions            .ExportDestinationType = ExportDestinationType.MicrosoftMail            .ExportFormatType = ExportFormatType.PortableDocFormat        End With
        'Add some error handling        Try            crReportDocument.Export()            MsgBox("Report exported successfully.")        Catch err As Exception            MessageBox.Show(err.ToString())        End Try
Hope this helps

Basic web plan -- how to handle email ?

Similar Messages

Maybe you are looking for