Basics, settings and using iPod
I have a 2G iPod Nano 2nd Gen. I have never registered it with my iTunes.
I have been fine in manually adding music to my iPod and using making recording with Macalley iVoice 3. It froze on me twice using the iVoice but the recordings were just fine. Twice I have tried to install an eBook on the iPod. The first could never finish (I don't remember what it was, a long time ago). Now, loaded the Merriam-Webster dictionary. It finished but at the end It said there was an error. It then made the iPod unable to shut down. I had to reset twice before it was back to normal and the dictionary is now there. it seems all intact, except for the "click for cover page" menu. It does nothing when I click on it.
So, what's the pros and cons of how I've set up (lack of) my iPod vs. doing it the way it's recommended?
Oh, I haven't set up my Mac Mini core2 yet. Can I use the iPod on both? I may need to copy notes, audiobooks, eBooks... from both systems and maybe back and forth. would be nice to do the same with music too.
iPod is current on updates, iTunes is not (v7.5), MacPro is 1 update behind and OS is 10.4.11, Mini is 10.5 and will do all updates when i have time to set it up.
I also received an 8G 3rd Generation nano & cannot get it to work on my itunes. I already had itunes on my computer but it is not connected to any old ipods. I updated it & when I plugged it in, the License agreement came up. I clicked "I agree..." and then hit save and saved it, but then I went to continue with whatever is next and my screen does not allow me to see anything past a certain point. I've tried EVERYTHING & it just won't work, there must be a 'Next' button or something but I can't get to it. Help!!
Similar Messages
-
A message keeps popping up when I try to join my network that says, "unable to join the network."
I have already reset network settings and restored ipod to original settings.
I already updated iTunes and upgraded iPod to iOS 6.
The password is correct. I even made sure by checking my wifi account.
I have completely restarted my internet connection multiple times.
I have also restarted my ipod multiple times
My wifi was working on my iPod yesterday before I reset all settings.
I updated it yesterday to iOS 5. Still didn't work.
It wasn't updated to the new iOS 6 until today so I don't think it has anything to do with the upgrade.
My camera started to be glitchy, so I reset my Ipod like I was advised in another discussion.
My internet wasn't connected anymore. My password wasn't working either, but the wifi connection was still showing.
Safari still wasn't working, though.
I did the sensible thing and I reset my network connection.
Now, the password isn't working and there's no wifi signal.
The camera is working well now, but the wifi is messed up. I didn't expect any of this to happen. The internet is all I use the iPod for. Now, the iPod is useless to me. Please help?are other things still connecting to the wifi without a problem?
Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>? -
IPad showing photos in about settings and using gb space despite being deleted
iPad showing photos in about settings and using gb space despite being deleted
And it is not Photo Stream photos that you are seeing reflected?
Try resetting your device(nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen redisplays, see if the issue is resolved.
If it isn't try syncing with iTunes on the computer you sync with, and uncheck "Sync Photos". See if that clears it up. If it does, then re-sync the photos that you want.
Cheers,
GB -
MM - Basic Settings and configurations
Hi Folks,
Please tell me what are all the Basic(General) settings and configurations to be made during a Standard SAP Implementation, as a MM Consultant. Please give them in order.
-Palluhi for basic setting u canrefer first thread of the MM forum
New to Materials Management / Warehouse Management?
now for the settings u can also refer the building block notes
for MM refer following
http://help.sap.com/bp_bblibrary/600/html/J05_EN_IN.htm
for CIN use following link
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/cin%252bconfiguration
More useful for CINwill be following
http://www.scribd.com/doc/2527809/CINcustomizing-1
regards
KI -
Lock settings for use iPod in public areas
We use the ipod in a public area and people reset the main menu all the time.
Is there a possibility to lock the settings of an iPod, without locking the whole iPod?
But: we cant lock the iPod entirely with the set combination, because visitors couldt´t use it anymore.
iPod 30GB Windows XPim sorry to say the answer is no.
-
Hi there,
I've tried to package my app with the latest Xcode 4.5 (version 19 Sep 2012) iOS 6 SDK, Flash Builder 4.6, Flex SDK 4.6 with Air 3.5 Beta overlay.
and unzip the .ipa file and i found the following automated settings on the Info.plist file was wrong:
<key>DTPlatformVersion</key>
<string>5.1</string>
<key>DTSDKBuild</key>
<string>9B176</string>
<key>DTSDKName</key>
<string>iphoneos5.1</string>
According to the Adobe specs, these settinsg are unchangeble, is there anyway to change these values to produce .ipa file that with iOS 6.0 settings with Flash Builder 4.6?
I believe this cause the following appstore submission issue with the iPhone 5 4-inch display splash screen image [email protected]:
Invalid Launch Image - You app contains a launch image with a size modifier that is only supported for apps built with the iOS 6.0 SDK or later.
Many thanks,
ANot everyone here was involved in the conversations that led up to this file, so here are some extra clues:
In your AIR3.5 folder (or whatever you named the folder) is a lib folder. Inside that is the current adt.jar file. Rename that in case you have to go back to it, and drag the supplied adt.jar file into the lib folder. Now publish your app.
You won't even need to quit Flash or Flash Builder.
Once you have the new IPA, go through the usual upload steps to the App Store, using Application Loader, and the file should process ok in iTunes Connect. Note, you will be asked to provide iPhone 5 screenshots. -
Problem when flying and using Ipod
Everytime I fly my ipod crashes. Has anyone experienced this before? How do I fix it?
This is not an uncommon complaint. If you search these forums going back a ways you will find a decent number of people who have iPods that after getting up in the air stop working until the land again.
The iPod is supposed to be good to some number of feet (10,000 maybe?) and airlines normally pressurize their cabins to be no more than the equiv of 8000 feet, but often less, so normally should be below the pressure levels for proper iPod use.
But, yes, some people just seem to have ones that don't even like a few/several thousand feet of elevation. Not much you can do about it unfortunately other than buying another one for flight use (maybe a flash based Nano would hold enough for most plane rides).
Patrick -
I reset my network settings and my ipod touch wont connect to wifi
i need help pleaseeeeeee!
- You did renter your network password right?
- What messages are you getting? You are not connected to the internet? Password incorrect?
- Do other devices connect to the network successfully?
- Haveyou tried restting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Have you tried powering off and then back on your router?
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Can it connect to other networks? -
Will and old and used ipod classic sync to my current version of itunes?
Will a 3rd generation ipod classic sync with my current updated version of itunes on my mac?
If so, can I put podcasts on it as well?mpenzenstadler wrote:
Will a 3rd generation ipod classic sync with my current updated version of itunes on my mac?
If so, can I put podcasts on it as well?
My oldest iPod is an ancient 30 GB Classic, and it syncs fine with the newest iTunes (12.0.1). -
Basic definitions and uses of EP,XI and BI
Hi All,
i am working on SAPEP and know what it can do.but a bit confused about other two netweaver technologies XI and BI.
1. What is XI generally used for?what skills required for that?
2. What is BI generally used for?what skills required for that?
How similar and difficult they are compared to EP.
Thanks in Advance
Rani AHi,
1. XI: stands for Exchange Infrastructure. If you have ever worked with middleware such as WebMethods Integration Server, IBM MQ Series, Tibco, etc, you can compare XI with these products. Its purpose is to act as a Hub connected to different systems (SAP and non-SAP). All participating systems send messages (such as Purchase Order documents) to XI, rather than directly sending to the receiver. XI contains message structure definition to validate correctness , receivers for this message, and what other adhoc changes to be applied to this message before relaying it to the receiver.
2. BI: Business Intelligence - purley used for reporting purposes. You do not carry out your transactions in a BI system. You use R/3 for that. Then you collect data into your BI system to report on it.
Imagine your employer wishes to run a media campaign to sell its newest product across the globe. It would require collecting data from all subsidiaries, and then manipulating it to identify purchasing patterns across each continent. Lets say people in Asia tend to spend a certain amount on a certain category of products in a certain timeframe. A BI system is built from scratch to support such analysis of data. You can compare SAP BI with the products from SAS, Teradata, SPSS etc.
So they have a totally different purpose than EP. The level of difficulty is dependent upon the complexity of landscape. Each area requires its own skillset.
Regards -
Finding Flash Installation, alter settings and use with webcam
I am running on Windows 7 using Chrome. I am doing a course where I need to send information from my webcam to a website. I downloaded Flash Player and somewhere on the website it had a section where it had the address of the university. It also had another address not applicable so I deleted that and in doing so also deleted the address of the uni. I know diddly squat about both the webcam and Flash and am really running out of time to submit my assignments. Flash did unload on my computer, but to where, I have no idea. I have done searches but it nothing. So that took most of yesterday. Today, I researched it further and it was suggested that Flash was incorporated in Google and was enabled by fault and included in Chrome system updates. So I went into plug ins and find the Flash listing is enabled. There is also only one listing on the plug ins in spite of me downloading one yesterday and it is supposed to be on Chrome as well. .Bottom line ..... how do Flash and the webcam work together? How do I reinstall the university's web address on Flash, does it automatically attach itself to webcam and then do I get the option of who I share my webcam work with. Hope you can understand all this because I can't and I am getting a mighty nervous about getting these assignments out. Many thanks
This is the Shockwave Player forum; your question should be posted in the Flash Player forum.
-
?
I understand all of this Meg; that is why I bought an Iphone; but never expected my phone not even give a at least a 24 or even 12 hours....I work 12 hour shifts and also would expect to have to charge each night but not twice a day or more. I am not always somewhere I can charge my phone.
Your points are true; however it doesn't help me...... -
INSTALLING AND USING NEW IPOD TOUCH
Cannot install and use IPOD touch on computer. Showing up as a camera and not accepting install. Have tried uninstalling previous versions of itunes and ipod downloads. Please advise. Would like to see this work today.
I got the same problem. I created new hotmail account, dowloaded latest itunes but the "download photos" window comes up along with my wife's itunes account which immediately SAYS it's syncing with mine yet there's still none of her tunes on my new touch (thank god), and even though it's plugged into my computer and I'm connected to the internet, it says i'm not connected. Do you NEED wi-fi to do this or what!? Maybe somone can help us out.
-
Hi,
I'm using basic auth and used to send username/password with
the URL to authenticate from another webserver (with some other
kind of authentication), but - as you know - Microsoft doesn't
support that any longer and so this works for some other
webclients but not for IE (or only with a patch, that isn't installed
everywhere).
Now I have seen that for Apache there is a module called
mod_auth_cookie to fake that kind of implicit authentification.
My Question: has anybody done this for SJWS or can't that
be done?
TIA
ReinfriedHi,
Please check the below link
Re: Accessing Portal component without login screen
hope is solve your problem.
Raghu -
Firefox 4 is slow, it hangs and uses far-too much memory
I've just had to roll-back to Firefox 3.6.16.
For those with a similar problem, here's the link:
http://www.mozilla.com/en-US/firefox/all-older.html
Firefox 4 became unusable. Firefox 3.6.16 is using about 110,00k of memory - but Firefox 4 was using, typically 160,000k but anything up to 200,000k causing my machine to hang as it struggled to find the memory.
The weird thing about the memory use was that it just kept on climbing - just a couple of tabs open, nothing special, but you watch the memory usage keep stepping on in about 200k increments.
There appears to be a major memory leak in Firefox 4, and until it is rectified it really is, for me, completely unusable. I had to use explorer to download 3.6.16 it was that bad.This is a reply I made to someone else who also finds the same problem. We think it is not a memory leak, but FF4 caching page in RAM.
Reply:
As I long time FF user (1st 20,000 downloaders) I am so disappointed with 4.0.
I find similar problem. 3.6.16 used approx. 6% of 2Gb RAM, 4 has been reported at 25%. Not caused by extensions as installed over 3.6 with no change in same few exts. Many other problems (e.g. 4 fails to remember allowed redirects & many undesired changes) so resorted to backup of 3.6. Not a definitive answer, but one sure to work is to install a totally portable version of 3.6.16 (or even 4 if you wish to play around with it), there are many portable versions available which do not mess with anything else on your machine, just Google Firefox Portable. I almost exclusively use Portable progs. for everything nowadays and if issue crops up it is as simple as deleting the folder it was installed in. Also it can be copied to a Flash Drive complete with all exts. & settings and used on any win os PC. This is a good recommendation. Hope this helps.
Maybe you are looking for
-
I enter the email address and password for a new Persona account for my Backpack. All the information is accepted. The screen tells me to access my account through the link sent to my email. The email is never received. Yes, my email service provider
-
Use .srt file for subtitles-less video bought in iTunes store
Context: - I bought a TV episode on the iTunes store, but unfortunately, unlike most TV shows on the store, it doesn't come with subtitles. - However, I've found an .srt file with the subtitles for said episode. Question: how can I get to play the vi
-
Character Display in old application
Hi there, I am continuing updates on a VB6 program MyReels: at http://www.ozemail.com.au/~lmstearn. It runs surprisingly well under Windows 8.1 for XPSP3 compatibility. Unfortunately, there are now problems with character display that weren't seen in
-
??Corrected subtitles won't build and burn????
I have corrected the spelling of some subtitles in an Encore project which appear correctly in the Preview but show up as the old version when I build and burn the project on DVD. Any ideas as to how to fix this? Is there a transcoded file i need to
-
Since 10.4.9 update: postfix needs to be started manually after reboot
Although mail services are all activated in Server Admin, postfix refuses to start up automatically after a system reboot. All I need to do, is open a Terminal window and type "postfix start" and all is well. The problem is, if we have a power outage