BasicTx and BasicRx daughter boards compatibility with USRP2920 and LabView

I want to know that BasicTx and Basic Rx daughter boards from Ettus research are compatible with USRP2920 and Labview or not.
Also do these boards supports variable gain or not? Please confirm
Thanks
JK
Solved!
Go to Solution.

They will work but you need to use property nodes to configure them. Ther is no LO so ther is no center frequency parameter. I and Q are separate channels so you will need to break them apart and treat them as such. There is no gain because the boards essentially provide access to the ADC.

Similar Messages

Framegrabber board control with ActiveX through LabView

I have a framegrabber board that is not from National Instruments. It is
from a
company called Coreco. The name of the board is the Bandit board. I have
been
trying to determine how to control it through LabView. Several weeks ago
I found
the ActiveX control for the Bandit board on the Coreco website (www.coreco.com).
I installed the control so that LabView could control the board. However,
I have not
been able to get image acquisition. I have read the instructions for the
ActiveX control,
but everything I try still does not start image acquisition. Does anyone
have experience
with both LabView and the Coreco Bandit ActiveX control. I would also consider
some other approach to controlling
the Bandit board. Thank you for any help
that
you can give.
Sincerely,
Trinity Ellis

>
> I have a framegrabber board that is not from National Instruments. It
> is
> from a
> company called Coreco. The name of the board is the Bandit board. I
> have
> been
> trying to determine how to control it through LabView. Several weeks
> ago
> I found
> the ActiveX control for the Bandit board on the Coreco website
> (www.coreco.com).
> I installed the control so that LabView could control the board.
> However,
> I have not
> been able to get image acquisition. I have read the instructions for
> the
> ActiveX control,
> but everything I try still does not start image acquisition. Does
> anyone
> have experience
> with both LabView and the Coreco Bandit ActiveX control. I would also
> consider
> some other approach to controlling the Bandit
board. Thank you for any
> help
> that
> you can give.
>
> Sincerely,
>
> Trinity Ellis
>
Try to use the Windows-DLL with is delivered with your board. I had used a
Matrox-Genesis board and had the same problems. The dll's worked. Gruß,
Tobi.

What logic boards are compatable with macbook pro mid 2010

i'm just curious about what logic boards are compatable with my macbook pro mid 2010? didn't know if i needed to stay within the same year or if there are others that would work with mid 2010 layout inside the casing. right now i have 2.4 GHz Intel Core 2 Duo and NVIDIA GeForce 320M 256 MB and really looking to upgrade this if i can find one online from a mac with a broken screen or some defect with the logic board intact.

Rather than the Samsung EVO, I would get a Crucial M500 series - http://www.amazon.co.uk/Crucial-960GB-Solid-State-Drive/dp/B00BQ8RGL6/ref=pd_sim _computers_5 - they just seem to 'play well' with Macs where some people have reported problems with Macs and the EVO series.
Good luck,
Clinton

Windows 8 and itunes 11 compatibility with an ipod

I have itunes11 and Windows 8. I've called Apple and I've talked to Microsoft. This was months ago. I can download itunes and run it from my laptop but am unable to sync my ipod. I get an error and it automatically reboots my computer. I was told there were known compatibility with itunes and Windows 8. This was months ago.
I know how to downgrade itunes to XP or Win 7. This is not the issue. I can download to my laptop and place, it will not sync to my ipod device (which is a fear years old), but when I did talk to support I was told that it was supported. The ipod was not the issue.. It was the incompatibility between the programs.
I see recent updates in the support community in the past month about production resolution but this still has not resolved my issue. I don't believe purchasing a new ipod is going to resolve the issue either.
If anyone has successfully developed a workaround or recently downloaded itunes11 w/ Windows 8 and can sync to an apple ipod I would love to know how you did it.
Kia
[email protected]

Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

Before my PC had iTunes, I loaded Aps from store onto my daughter's PC with iPad connected. I indicated my email address and Apple password. Now I want to upgrade to next iPad but Aps in my iPad are not on my PC iTunes. Do I have to buy again to keep them

I'm a new user of an iPad. Before my PC had iTunes (it does now), I loaded Aps from from the iStore using my daughter's PC with my iPad cable-connected. I indicated my email address and Apple password--not hers and paid for these Aps--receipts arrived via my email. Now I want to upgrade to 5.1 but the Aps now loaded on my iPad do not show up on my PC iTunes library. When I click 'Upgrade' I get a warning message that says all Aps currently on the iPad will be obliterated in the process which of course I don't want to have happen because they're not showing up on my PC which presumably means my PC is not aware of what's on my iPad. Do I have to buy these same Aps again to keep them if I'm going to upgrade to 5.1, and how do I get my iTunes on my PC to back up the Aps currently loaded onto my iPad?

You should be able to copy the apps (and any other iTunes purchases) over to your computer's iTunes via File > Transfer Purchases. And as long as apps remain available in the store, and you use the same iTunes account as you originally used to purchase them, you should be able to re-download them in the future : http://support.apple.com/kb/HT2519
If you are already on iOS 5+ on your iPad then you should be able to update the iPad directly on the iPad via Settings > General > Software Update .

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

I have my daughters Ipod, my iphone, my wife's Iphone and Ipad on the one Apple ID. Since the latest update we are receiving Imessages from our daughter's Ipod with my wife's caller ID on the one message strand. Can I fix this problem?

I have my daughters Ipod, my iphone, my wife's Iphone and Ipad on the one Apple ID. Since the latest update we are receiving Imessages from our daughter's Ipod with my wife's caller ID on the one message strand.
Is it possible to differentiate between all the devices?Can I fix this problem?

I recommend that you
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

How do I find out the year of my mac mini and whether it is compatable with ipad or iphone

I have a mac mini ser#YM5521HBTAA and want to know if it will work with ipad or iphone. I'm not sure of the year purchased. I'm no longer using it and would like to give it to my daughter to use with her Ipad and/or iphone

If it's an Intel model with 10.5.8 or later installed it will work. You can decode the full information at the following site:
Decode Mac Serial Number

Windows 7 Compatability with Labview 8.0 and missing files while interfacing the FPGA with LV

I am trying to use an FPGA (PCI-7830R) with Labview 8.0. The computer has Windows 7 OS. I installed LV 8.0 in the proper order with the FPGA Module and labview is able to see the FPGA when I open a .lvproj (the FPGA is in the tree) however there is a warning symbol next to the FPGA selection and when I try to open a .vi file that is used on the other stations in my lab (it works on all the other stations), labview is unable to find a whole bunch of files. There are some pictures.
Missing File (there are a bunch more but this is the fist one).

According to this LabVIEW Compatibility LabVIEW 8.0 is NOT compatible with Windows 7
Visualize the Solution
CLA
LabVIEW, LabVIEW FPGA

Problems with Apple Preview filled forms and compatibility with Windows?

Anyone else having problems with Apple Preview filled out forms and compatibility with Microsoft Windows after Lion?
I've had it happen recently with two different people, where the data I had entered on a fillable PDF form could not be seen by Microsoft Windows, but I saw my data just fine.
I don't know what version of Adobe Acrobat they were running.
Thanks,
kt

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

A730 keyboard and mouse compatibility with other machines

I would like to have a USB keyboard mouse with the machine. Unfortunately there is not an option for that with this machine. I would like to sell the k/m that comes with the machine.
What machines including ones not made my Lenovo would the k/m be compatible with?
According to the Lenovo support page for the drivers for this k/m the drivers are compatable with various Lenovo machines.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS031648
Does that mean the k/m are compatable with those machines?
Is a certain piece of hardware other than the k/b required for it to work? If so, is that piece of hardware available after market?
Machine Type: M90z AIO ; Product: 3091CTO (Custom), CPU: i5-650, Video Card: Intel(R) HD Graphics, Memory: 4.00 GB,
Network Card: Intel(R) WiFi Link 1000 BGN, OS: Windows 7 Professional 64-bit

Thank you Assaf for taking the time to install the game to check to see if you got a similar problem
honestly i'm not sure its my 865PE Neo2 LS or not,it may be a software issue. I'm just guessing because that was a the biggest change in my system before I started to experiance this problem.
I have experianced this problem with the default windows drivers as well as with logitechs current Mouseware drivers, although i have not tried to install older mouseware drivers
I've had lockups with CoreCell installed as well as removed.In DirectX 8.1 as well as DirectX 9
I thought perhaps it might have been my soundcard because prior to buying that I didnt have any problems...so I removed that...but i still got the same problem (although as i type this i realize i didnt uninstall the Audigy software before i tested....hhmmm. I'll have to test that)
I have noticed it happens more often in OSP/Quake3 (a competition mod) than in plain vanilla Quake3, but it does happen in both.
One intersting thing i discovered by trying out a Belkin KB with my set up was that when i hit a certain combination of keys it would exec a chat bind i had bound to a whole other key ?!?
the combination was r + g + spacebar = keypad home
That particular problem stopped once I went back to original Keyboard. It did stick in my mind however that when playing Q3 i am hitting combinations of keys all the time and that maybe I'm hitting a combination that is problematic for my system. I have not been able to figure out what that combintion is yet (I tried for quite a while ...but was unable to find the correct combination to reproduce the problem )

My daughter added songs with her I Tunes Card and My credit card was charged, what do I do?

My daughter added songs with her I tunes card and my credit card was charged, how do I get it off my credit card?

What process did your daughter use, there is a specific format to redeem an iTunes gift card. The gift card must be redeemed using the Redeem link in the Quick Links on the right side of the iTunes Store in iTunes on a computer or the Redeem button at the bottom of both the iTunes and App Store apps in iOS. Redeeming the gift card then applies the value of the card as an available credit to the user's iTunes account. The credit is used first before any bank card also stored in the account. If the purchases use the entire credit and there is an additional balance due, it will be charged to any bank card stored in the account.

Is ECC 5.0 and EP 6.0 Compatibility with Oracle 10g (10.2.0.2)?

Hi,
Is ECC 5.0 and EP 6.0 are Compatibility with Oracle 10g (10.2.0.2)?
Is there any blog or link to get the details on SAP Compatibility?
Regards,
Vamshi.

Yes, both versions are compatable with oracle 10.2.0.2.
https://websmp210.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200314690900000171&00200682500000003818=PLTFRM
Regards,
Jazz

Before I update, is firefox 27.0.1 compatable with Skype click and call?

Every time I update Firefox I lose Skype click and call and have to wait weeks for access to it again. I now will not update Firefox until I know it is comparable with Skype click and call.
Is firefox 27.0.1 compatable with Skype click and call at this time?

I presume ''"Skype click and call"'' is official [http://portableapps.com/apps/internet/firefox-portable-esr Skype] software.
If you need skype and this happens on every update an unoficial solution would be to install Firefox portable ESR as an additional browser and then use that for skype whilst using the fully updated Firefox Release for all other browsing. (Firefox Portable is based on Mozilla Firefox, the ESR version probably will remain compatible with skype and not have problems on updates )
* http://portableapps.com/apps/internet/firefox-portable-esr
The official solution would be to use Firefox Releases and update Skype. Complaining to Skype as necessary when it is not compatible with the Firefox Releases. Skype will be aware of the Release dates and will be able to test and modify their software as necessary whilst using public pre release versions of Firefox. <br />Presumably Skype is controlled by MS and they would prefer you to always use IE and not use Firefox at all.

Logic Pro X compatibility with mbox 2 mini and 2009 core duo macbook

I currently have Pro Tools LE 8.0.3 and an Mbox2 Mini, both of which amazingly still work on Mountain Lion 10.8.4. I'm interested in learning Logic and am trying to confirm compatitility with the Mbox2 Mini on a first generation core duo Aluminum Macbook (2.4 Ghz) running 4gb of RAM. The system requirements just say 10.8.4 or later with a 64 bit processor. The Macbook runs fine, and I primarily just record stereo piano tracks, so it's not like I'm going to have 16 tracks running on it. Anyone using an Mbox2 Mini, and any issues with the hardware?

It's not an external device's compatibility with LPX that matters...
It's your external hardware's compatibility with whatever OS X version you are using to run LPX in.... that is important.
Im guessing you upgraded OS X about the same time you switched to LPX?
So....
Make sure you have installed the drivers and software from this page....
http://www.apogeedigital.com/support/quartet#tab-id-1
Failing that, contact Apogee support for further assistance
http://www.apogeedigital.com/support/contact-support
Note: Why is it showing Duet and not Quartet briefly? Are you sure you installed the correct drivers or did you, at one time have a Duet?
Additional: You might want to try this.. though I doubt it will fix things... but this can cure all kinds of weird issues...
Delete both the main plist and the CS file...
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
Quit Logic Pro
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
Restart the computer.
Note: if you cannot find either of these files you didn't follow the instructions exactly as described

BasicTx and BasicRx daughter boards compatibility with USRP2920 and LabView

Similar Messages

Maybe you are looking for