Basis patch error

iam installing basis 11 th patch it is executing from 12 hours now it is going on and background process also running it shows ocs_queue_import shows 78550 seconds duration.but opening log it shows error.how can i slove this error.please send solution for this
Edited by: vasu k on Sep 20, 2008 7:21 AM

Have u met all the pre-requisites before applying
Pls post A & S log from usr\sap\trans\log directory.
Also pls check whether your ORAARCH has enough free space.
check your SPAM/SAINT is updated
check with your kernel version

Similar Messages

Error in basis patch SAPKB64012

Hello
I got the duplicate key error while applying basis patch SAPKB64012 in import_proper phase
Can anyone tell me the solution for this
Thanks

Hi Aashu,
Please refer to Note 88656, section 29, and use the attached allow file to ignore the error.
Basis Support Package SAPKB64013 deletes the corrupt entries in RSMPTEXTS.
Note 88656, section 29 says,
There is "data scrap" in the target table.
The error can also occur in the target table of the existing data scrap.
In many cases, R3trans essentially reads the existing table entries in
sorted sequence to merge them with the newly transported entries. Data
scrap may result in the entries not being returned correctly in sorted
sequence.
These scrap characters, in many cases, were distributed by transports
into several systems.
In the majority of cases, these types of errors can only be solved by
cleaning up the export system and repeating the transport. If the error
also occurs in when you are importing the cleaned-up transport, the data
scrap must also be cleaned up in the import system.
As of Release 6.20, data scrap is no longer exported. See section 5c in
Note 1074030, and Note 718511.
How to do:-
Please copy the attached file(from note) in AB64012.zip to /usr/sap/trans/cofiles
or /usr/sap/put/cofiles and repeat the import.
You can do the same for SP SAPKB64013.
Please use the latest versions of the tool 'tp' along with 'r3trans'
as well.
Please let me know if it resolves or not.
Thanks
kishore

Runtime error at installing basis patch

hi
experts
i applied basis patch SAPKB60070012 in ECC 6.0 with databse oracle10.2.0after iam logging to the sap i got run time error below
Runtime Errors         SYNTAX_ERROR
Date and Time          22.10.2008 11:03:27
Short text
     Syntax error in program "SAPLSCP2 ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLOLEA" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLSCP2 " in include
      "CL_SALV_FORM_ELEMENT==========CU " in
     line 13:
     "The type "IF_SALV_FORM_CONFIG" is unknown."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
Error analysis
     The following syntax error was found in the program SAPLSCP2 :
     "The type "IF_SALV_FORM_CONFIG" is unknown."
igger Location of Runtime Error
Program                                 SAPLOLEA
Include                                 LOLEAU13
Row                                     71
Module type                             (FUNCTION)
Module Name                             AC_CALL_METHOD
urce Code Extract
ne SourceCde
41   DATA AC_GLOBAL_FLUSH_MODE TYPE C.
42   DATA MAXLINES          TYPE I.
43   DATA URL(255)          TYPE C.
44   DATA LEN               TYPE I.
45   DATA FLDTYPE           TYPE C.
46   DATA DOLPARAM          TYPE C.
47   DATA NCOMPS            TYPE I.
48   DATA I                 TYPE I.
49   DATA N(2)              TYPE N.
50   DATA SIZE              TYPE I.
51   DATA SVARS_WA          LIKE svars_record.
52
53   FIELD-SYMBOLS: <F>, <AC_X1> TYPE X, <AC_X2> TYPE X,
54                  <EXPORTS_WA> TYPE OLE2_METH_PARMS.
55
56 For the call to CL_ABAP_CHAR_UTILITIES=>charsize......................
57   CLASS CL_ABAP_CHAR_UTILITIES DEFINITION LOAD .
58
59
60 * Initialisation
61   CLEAR: EXPORTSINDEX, PARAMS, MESSAGE_NR, MESSAGE_TEXT.
62
63 * check and set the AC_FRONTEND_RUNS_IN_UTF8 parameter.
64 * if the AC_FRONTEND_RUNS_IN_UTF8 parameter is set, multiply the string parameter len by 3
65 * to avoid parameters being truncated in the frontend.
66   IF AC_FRONTEND_RUNS_IN_UTF8 <> ABAP_TRUE.
67
68     DATA : gui_uses_utf8 TYPE rststype-sel_ok.
69
70     " ask Matthias whether SAPGUI uses the length critical codepage UTF-8
>>>     CALL FUNCTION 'SCP_GUI_USES_UTF8'
72       IMPORTING
73         gui_uses_utf8 = gui_uses_utf8.
74
75     IF gui_uses_utf8 IS NOT INITIAL.
76       AC_IS_FRONTEND_UTF8 = abap_true.
77     ENDIF.
78
79     AC_FRONTEND_RUNS_IN_UTF8 = abap_true. "set to true to avoid multiple calls
80   ENDIF.
81
82
83 * If there are entries in IMPORTS set the RETURN_VALUES_EXIST for
84 * smart flushing. So if RETURN_VALUES_EXIST = ' ' a flush can be
85 * postponed in AC_FLUSH_CALL
86   IF NOT IMPORTS[] IS INITIAL.
87     RETURN_VALUES_EXIST = 'X'.
88   ENDIF.
89
90 * determine size of exports table
what is the solution for it.

hi venkat
u execute this tp command at /usr/sap/trans/bin with sidadm user.before executing of this command take backup
/usr/sap/trans/bin # tp r3i SAPKB70014 SID pf = /usr/sap/trans/bin/TP_DOMAIN_KDV.PFL -Dclientcascade=yes -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
i got tp error 8 in my server.which error u got u mention above.
NOTE:After executing this command return must be 0 or 4.other than this u contact sap.wont tell about this command
after solving this problem u enter spam tcode and import queue.dont open another transactions while installaing patch except spam.
i tried almost three times i succeed.
regards
vasu

Basis patch IMPORT_PROPER error

Hi All,
Iam applying basis patch 12 .
I have done this on other system with no problem, but on the
current one, it seems to hang on the "imp all" step (displayed
next to the spinning clock.
I opened another session I canceled spam transaction.
it is giving error.
Import_proper.
How to overcome this problem.
Regards
Siva

Hi Markus & sunil,
I applied patch, But problem is same.
APQUA:oraeqa> /oracle/EQA/102_64/OPatch/opatch apply
Invoking OPatch 10.2.0.2.0
Oracle interim Patch Installer version 10.2.0.2.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home       : /oracle/EQA/102_64
Central Inventory : /oracle/oraInventory
   from           : /oracle/EQA/102_64/oraInst.loc
OPatch version    : 10.2.0.2.0
OUI version       : 10.2.0.2.0
OUI location      : /oracle/EQA/102_64/oui
Log file location : /oracle/EQA/102_64/cfgtoollogs/opatch/opatch-2008_Nov_06_13-
42-32-CST_Thu.log
ApplySession applying interim patch '5099990' to OH '/oracle/EQA/102_64'
Invoking fuser to check for active processes.
Invoking fuser on "/oracle/EQA/102_64/bin/oracle"
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local sy
stem.
(Oracle Home = '/oracle/EQA/102_64')
Is the local system ready for patching?
Do you want to proceed? [y|n]
y
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '5099990' for restore. This might take a
while...
Backing up files affected by the patch '5099990' for rollback. This might take a
while...
Patching component oracle.rdbms, 10.2.0.2.0...
Updating archive file "/oracle/EQA/102_64/lib/libserver10.a" with "lib/libserve
r10.a/opiexe.o"
Updating archive file "/oracle/EQA/102_64/lib/libserver10.a" with "lib/libserve
r10.a/opitsk.o"
Updating archive file "/oracle/EQA/102_64/lib/libcommon10.a" with "lib/libcommo
n10.a/ttcclr.o"
Running make for target ioracle
ApplySession adding interim patch '5099990' to inventory
Verifying the update...
Inventory check OK: Patch ID 5099990 is registered in Oracle Home inventory with
proper meta-data.
Files check OK: Files from Patch ID 5099990 are present in Oracle Home.
The local system has been patched and can be restarted.
OPatch succeeded.
SAPQUA:oraeqa>
Regards
Siva

Error applying basis patch SAPKB70013

Hi, i am applying basis patch 13 currently i am facing one error import_proper error. i am not able to do any thing. i am getting below dump. can any body help on this?
What happened?
    Error in the ABAP Application Program
    The current ABAP program "????????????????????????????????????????" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLTMSU " in include "LTMSUTOP
     " in
    line 26:
    "The TYPE-POOL "CTSC" is unknown."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "????????????????????????????????????????" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.

Hi Suresh,
are there any users working in your system while you import the SP?
It could   very well be that the import error is related to someone who was using at that time the program.
It is always recommended to apply SPs while noone is working on the system.
Rgds,
Loukas

BASIS patch SAPKB64024 it stuck on XPRA_EXECUTION

Hello everybody,
I am applying the BASIS patch SAPKB64024 it stuck on XPRA_EXECUTION.
it give the error
The following details help you to analyze the problem:
   -   Error in phase: XPRA_EXECUTION
   -   Reason for error: TP_STEP_FAILURE
   -   Return code: 0012
   -   Error message: OCS Package SAPKB64024, tp step "R", return code 0012
I restart the import procedure but generate same error.
I have read SAP NOTE 589103 but unable to execute said program TOUCHSRC.
Job Log display :
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server SAPQAS were synchroniz
ABAP/4 processor: LOAD_TYPEPOOL_VERSION_MISMATCH
Job cancelled
Please suggest.
Regards
Ganesh

Hi Ganesh,
you can stop sap system and start sap system.
Repeat the patch application after this. This should work now.
Regards,
Deepak Kori

Autoconfig -patch error

Hai frnds ,
iam getting the eroor when i run autoconfig
=========================[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /pix/p01/oracle/pixcomn/admin/install/pix_server1
afcpctx.sh INSTE8_PRF 1
=======================================================
i was asked to apply the patch 3377508(got from metalink)when i tried to applied the patch i get the following error.iam a fresher and i dont know wat to do.i got the error when i run the patch
the error is===========
*********Writing jobs to run to restart file.
Reading jobs from FND_INSTALL_PROCESSES table ...
FAILED: file afmntmds.ldt on worker 1 for product fnd username APPS.
FAILED: file functype.ldt on worker 2 for product fnd username APPS.
FAILED: file b2040719.ldt on worker 3 for product fnd username APPS.
FAILED: file afmntfns.ldt on worker 4 for product fnd username APPS.
FAILED: file afctxdep.ldt on worker 5 for product fnd username APPS.
Done reading jobs from FND_INSTALL_PROCESSES table ...
Telling workers to read 'todo' restart file.
Done.
ATTENTION: All workers either have failed or are waiting:
FAILED: file afmntmds.ldt on worker 1.
FAILED: file functype.ldt on worker 2.
FAILED: file b2040719.ldt on worker 3.
FAILED: file afmntfns.ldt on worker 4.************* Start of AD Worker session *************
=======================
so please help me to run the patch correctly and then run the autopatch correctly
Thanks and Regards
Parithi.A.

Hi,
Search AutoConfig for afcpctx.sh, you should find more details about the error around the filename.
For the patch error, please search the workers log files for details about the error -- Log files can be found under $APPL_TOP/admin/<SID>/log directory (search for adwork*.log).
Regards,
Hussein

Patch error...dammit :)

I installed the patch and got:
svrmgrl: error in loading shared libraries: libclntsh.so.8.0: cannot open shared
object file: No such file or directory
Applying patch 8.1.5.0.1 .....done
Applying patch 8.1.5.0.2 .....done
Did it load? Or is that error serious? Do I need to correct something and then reinstall it?
Also, I can't run dbassist like many people I see have had problems with. Unable to initialize threads: cannot find class java/lang/Thread
Could not create Java VM
Anyway...I decided to try and install the patch..then try again and if that doesn't work...I'm going to try installing a later version of the JVM other than 1.1.6 like Oracle says to use. If anyone knows a way around that error I'd appreciate it!
THANK YOU THANK YOU THANK YOU...in advance.
-Julie

AFAIK, you do not have to rerun the root.sh script.
I have already upgraded to 8.1.5.0.2.
That patch error may be related to the relinking script bug that I have posted earlier.
Basically, what I found out is that if you did not install some/all of the oracle options, the relinking will fail. The relinking script I think assumes that all the options (and related lib file) are installed, which in my initial installations were not.
If you apply only the 8.1.5.0.1 patch, svrmgrl and sqlplus will still report 8.1.5.0.0. If you apply the .0.2 patch, in my case (when I did not install the options), I cannot run svrmgrl and therefore unable to create a database.
Check your /tmp/81501.log and /tmp/81502.log.
Do a grep for "No such file"
If grep returns:
/usr/sbin/ld: -lxxxx No such file or directory, the relinking has failed.
null

How to install java stack ,only abap ,basis patch level 9 installed

how to install java stack ,already installed abap ,basis patch level 9,please any one guide me and please give me installation steps for java stack.

Hi,
From sapinst, install Java Add-on.
check installation guide.
Thanks
Sunny

HT3728 Base station error, air port utility was unable to find my airport device. Why does it say this when it recognizes my airport on the computer? Yellow light has been on

Base station error, air port utility was unable to find my airport device. Why does it say this when it recognizes my airport on the computer? Yellow light has been on

On the older version of the AE you can still use older airport utility.
But once you load the new one you cannot easily go back.. you can load an older 5.6 version though.. instructions below.
For 6.3 you need to run ipv6 local link.
see http://support.apple.com/kb/TS4597
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

MOVED: Base Clock Error Occured + Shut down every 30 minutes

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=173484.0

I had my motherboard checked by the technicians nearby and found out that my motherboard is a victim of static. Good thing it is still within warranty so they decided to replace it. I have been running my rig for two weeks now and so far neither regular shutdowns nor Base Clock errors were encountered.
My BIOS is still 1.5 and so far I don't have any issues with it.
But just to answer xmad's question:
Is the Ram installed into the 2nd and last DIMM from the CPU?
   Yes, i had this one checked and rechecked
What are the temps during a stress test?
   i forgot.. but it was below 90C
Does the Behavior still occur with a single stick of ram installed into DIMM 2?
   yea, unfortunately

MSI XPower OC Genie - Base Clock Error!!

Every time I open CommandCenter I get this Base Clock Error!! Message...
I just used OC Genie (2nd level - RED), and it looks like it can't OC my CPU but still uses the XMP of my RAM, so what gives?
Anyone?

Quote from: Gamtu on 06-August-13, 05:43:24
I had a similar result with IBT. It scared the crap out of me. I think I hit 98c on one core I couldn't hit the stop button fast enough.
I know what you mean. Seeing 90C or more does make one give a double take. I am sure if I would have used IBT at 50X, the CPU would be screaming for life and shutdown to save itself.
Another anomaly I can't explain is when running real world apps and programs for further stability testing at both 47X and at 50X, none of the CPU cores went over 64C at either speed! I can only come to a conclusion concerning this that these CPU's or this platform is really smart and only uses what it needs to do the job asked of it.
Another feature of this platform that I 'really' like is the power saving is still intact even when the CPU V. is taken out of Auto.
I probably better leave the thread as I don't really have the exact same board or components as you and the OP have. My results and experiences with this platform may not be typical or apply to yours for comparison. I will add that as long as the CPU IMC can handle it, the Corsair Dominator Platinum RAM has been outstanding! RAM speed of 2666 @ 50X is not too shabby, but again, all depends on the CPU IMC.

Basis patch SAPKA46C52

Hi
BASIS patch SAPKA46C52 hanging on DDIC_ACTIVATION for 2 hours on our production system. I have tried implementing the patch three times now. The first time I stopped the patch running after 2 hours.
I've tried reseting the patch queue so that I can start the import again but the system won't allow me. I've kicked of the patch off again but it's now hanging at the tp_buffer stage and there's nothing going on in SM66.
Anyone any ideas
thanks
Siobhan

Hello Siobhan,
RDDIMPDP is your transport program. Unless this job is running you can not do any imports whether normal transports or support packages.
Please visit this link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/3d/ad5c784ebc11d182bf0000e829fbfe/frameset.htm
Further the problem you faced is a known issue with SP51 and has been corrected in SP52. Infact the program BTCTRNS1 which is used to deactivate all jobs except RDDIMPDP and RDDIMPDP _CLIENT has got affected by this and in SP52 is deactivating these jobs as well.
Hope this information was useful for you.
Regards.
Ruchit.

TP_STEP_FAILURE " ERROR WHILE APPLYING SAP NW 04 SR1 ABA AND BASIS PATCHES

Hi Freinds!!
..I have completed cinst, dbinst, client copy, jinst, xinst installation for XI 3.0 INSTALLAION ON ABAP + JAVA.
I have first applied PI_BASIS patches and middle of it, it displayed the message that pre-requisite are not met i.e. First SAP_BW , SAP_BASIS, SAP_ABAP pathces needs to apply.
While applying SAP_BASIS and SAP_ABA patches... I'm getting the following error message ...
" The import was stopped, since an error occurred during the phase IMPORT_PROPER, which the Support Package Manger is unable to resolve without your input..
After you have corrected the cause of the erro, continue with the import by choosing Support
Package > Improt Queue from the initial screen of the Support Package Manager.
The following details help you to analyze the problem :
-Error in phase : IMPORT_PROPER
-Reason for Error : TP_STEP_FAILURE
-Return Code : 0012 "
....So, what could be the cause of the problem ? Do I need to increase table space through brtools command at ora<sid> ?!!
Pl. help....
Many thanks in advance...
-Rupen Patel

Thanks a lot everybody.
Although I had upgraded Kernel Patch Level from 43 to 155, the real cause was, it seems that was maxed out Oracle Table, ..as I found it through ST22 tr code which inturn displayed a logfile which displayed the details of error. I used brtools to extend the tablespace of a table, reapplied the patches thorugh SPAM and it worked out quite smoothly.
Thanks again and Regards,
-Rupen Patel

Mopatch - cannot unpack patches error

I have just upgraded the database from 10.2.0.2 to 10.2.0.4. Downloaded current mopatch, opatch, SAP bundle patch. I attempt to run mopatch in documentation mode and get the following. Unpack error is at the end. This is running on AIX 5.3.
MOPatch - Install Multiple Oracle Patches in One Run - 2.1.3.
Copyright (c) Oracle Corporation 2007-2010. All Rights Reserved.
Version:       2.1.3
Revision:      5.1.2.4
Command-line: /oracle/XC1/102_64/MOPatch/mopatch.sh -v -d -s /oracle/XC1/patches.10204
Oracle Home:   /oracle/XC1/102_64
RDBMS version: 10.2.0.4.0
OPatch version:10.2.0.4.9
Clean-up:      supported
PSUs:          supported
Log file:      $ORACLE_HOME/cfgtoollogs/mopatch/mopatch-2010_06_29-06-19-24.log
Patch base:    .
Patch source: /oracle/XC1/patches.10204
Link script:   ./link.sh
Readmes:       ./READMES-2010_06_29-06-19-24.txt
Strpd. Readmes:./READMES-STRIPPED-2010_06_29-06-19-24.txt
make utility: /usr/ccs/bin/make
unzip utility: /oracle/XC1/102_64/bin/unzip
User name:     oraxc1
Working dir:   /oracle/XC1/patches.10204
System:        AIX lyu121 3 5 00CDA74F4C00
Disk free:     2396868 KBytes on /oracle/XC1/102_64
Disk required: 177120 KBytes on /oracle/XC1/102_64
Getting pre-run patch inventory...
executing: "/oracle/XC1/102_64/OPatch/opatch" lsinventory -retry 0 -invPtrLoc /oracle/XC1/102_64/oraInst.loc -xml "./mopatch-18964-946258/preinv.xml"
========================================================
GENERIC OPATCH VERSION - FOR USE IN SAP ENVIRONMENT ONLY
========================================================
Invoking OPatch 10.2.0.4.9
Oracle Interim Patch Installer version 10.2.0.4.9
Copyright (c) 2009, Oracle Corporation. All rights reserved.
Oracle Home       : /oracle/XC1/102_64
Central Inventory : /oracle/oraInventory
   from           : /oracle/XC1/102_64/oraInst.loc
OPatch version    : 10.2.0.4.9
OUI version       : 10.2.0.4.0
OUI location      : /oracle/XC1/102_64/oui
Log file location : /oracle/XC1/102_64/cfgtoollogs/opatch/opatch2010-06-29_06-19-26AM.log
Patch history file: /oracle/XC1/102_64/cfgtoollogs/opatch/opatch_history.txt
Lsinventory Output file location : /oracle/XC1/102_64/cfgtoollogs/opatch/lsinv/lsinventory2010-06-29_06-19-26AM.txt
Installed Top-level Products (3):
Oracle Database 10g                                                  10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 1                            10.2.0.2.0
Oracle Database 10g Release 2 Patch Set 3                            10.2.0.4.0
There are 3 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded.
Getting pre-run patch inventory...done.
Analyzing installed patches...
Analyzing installed patches...done.
No patches installed in Oracle Home /oracle/XC1/102_64.
Analyzing patches to process...
caution: filename not matched: SAP_102044_201006/9585133/etc/config/inventory
caution: filename not matched: SAP_102044_201006/9585133/etc/config/actions
caution: filename not matched: SAP_102044_201006/9584846/etc/config/inventory
caution: filename not matched: SAP_102044_201006/9584846/etc/config/actions
caution: filename not matched: SAP_102044_201006/9584028/etc/config/inventory
caution: filename not matched: SAP_102044_201006/9584028/etc/config/actions
caution: filename not matched: SAP_102044_201006/9578683/etc/config/inventory
caution: filename not matched: SAP_102044_201006/9578683/etc/config/actions
caution: filename not matched: SAP_102044_201006/9559011/etc/config/inventory
caution: filename not matched: SAP_102044_201006/9559011/etc/config/actions
caution: filename not matched: SAP_102044_201006/9558995/etc/config/inventory
caution: filename not matched: SAP_102044_201006/9558995/etc/config/actions
caution: filename not matched: SAP_102044_201006/9509364/etc/config/inventory
caution: filename not matched: SAP_102044_201006/9509364/etc/config/actions
caution: filename not matched: SAP_102044_201006/9458152/etc/config/inventory
caution: filename not matched: SAP_102044_201006/9458152/etc/config/actions
caution: filename not matched: SAP_102044_201006/9390484/etc/config/inventory
caution: filename not matched: SAP_102044_201006/9390484/etc/config/actions
caution: filename not matched: SAP_102044_201006/9337325/etc/config/inventory
caution: filename not matched: SAP_102044_201006/9337325/etc/config/actions
Analyzing patches to process...done.
Operations to be executed:
apply patch SAP_102044_201006_AIX.zip!9352164 (psu sql java)
apply patch SAP_102044_201006_AIX.zip!9711859
apply patch SAP_102044_201006_AIX.zip!9585133
apply patch SAP_102044_201006_AIX.zip!9584846
apply patch SAP_102044_201006_AIX.zip!9584028 (sql)
apply patch SAP_102044_201006_AIX.zip!9578683
apply patch SAP_102044_201006_AIX.zip!9559011
apply patch SAP_102044_201006_AIX.zip!9558995
apply patch SAP_102044_201006_AIX.zip!9509364 (sql)
apply patch SAP_102044_201006_AIX.zip!9458152
apply patch SAP_102044_201006_AIX.zip!9390484
apply patch SAP_102044_201006_AIX.zip!9362218
apply patch SAP_102044_201006_AIX.zip!9337325
apply patch SAP_102044_201006_AIX.zip!9280746
apply patch SAP_102044_201006_AIX.zip!9254968 (java)
apply patch SAP_102044_201006_AIX.zip!8546356
apply patch SAP_102044_201006_AIX.zip!8544696
apply patch SAP_102044_201006_AIX.zip!7331323
apply patch SAP_102044_201006_AIX.zip!6944036
apply patch SAP_102044_201006_AIX.zip!6862987 (sql)
apply patch SAP_102044_201006_AIX.zip!6826661
apply patch SAP_102044_201006_AIX.zip!6817844
apply patch SAP_102044_201006_AIX.zip!6768114
apply patch SAP_102044_201006_AIX.zip!6705635 (sql)
apply patch SAP_102044_201006_AIX.zip!6694370
apply patch SAP_102044_201006_AIX.zip!6471079
apply patch SAP_102044_201006_AIX.zip!6331062
apply patch SAP_102044_201006_AIX.zip!6315003
apply patch SAP_102044_201006_AIX.zip!6313035
apply patch SAP_102044_201006_AIX.zip!6082832
apply patch SAP_102044_201006_AIX.zip!6004916
apply patch SAP_102044_201006_AIX.zip!5935935
apply patch SAP_102044_201006_AIX.zip!5880921
apply patch SAP_102044_201006_AIX.zip!5561212
Processing patch "SAP_102044_201006_AIX.zip!9352164"...(1 of 34)
executing: "/oracle/XC1/102_64/bin/unzip" -qq -d "./mopatch-18964-946258" "/oracle/XC1/patches.10204/SAP_102044_201006_AIX.zip" "SAP_102044_201006/9352164/*"
unzip: can't find ./mopatch-18964-946258/stage, ./mopatch-18964-946258/stage.zip or ./mopatch-18964-946258/stage.ZIP, so there.
Processing patch "SAP_102044_201006_AIX.zip!9352164"...failed.
Reason: Cannot unpack patch.
I get the same error for all 34 patches. I'm following note 1027012. Any help would be greatly appreciated!

> executing: "/oracle/XC1/102_64/bin/unzip" -qq -d "./mopatch-18964-946258" "/oracle/XC1/patches.10204/SAP_102044_201006_AIX.zip" "SAP_102044_201006/9352164/*"
> unzip: can't find ./mopatch-18964-946258/stage, ./mopatch-18964-946258/stage.zip or ./mopatch-18964-946258/stage.ZIP, so there.
Can you execute manually
/oracle/XC1/102_64/bin/unzip" -qq -d "./mopatch-18964-946258" \
"/oracle/XC1/patches.10204/SAP_102044_201006_AIX.zip"
Markus

Basis patch error

Similar Messages

Maybe you are looking for