Bass problem resolved - Can no one advise me please
Has the new 80 gig Ipod had the previous bass distortion problem resolved ?
The old 60 gig model showed significant bass distortion (bass drum etc) on some tracks and was a known problem.
I am thinking of buying the new 80Gig tomorrow - or - the Creative model - -can anyone advise right away please /
Thank you
Brian
Check through the forum and use bass distortion as a search - you will then see some time ago that a problem did exist. It was due as far as I know to the change of the output whcih caused an overlaod on deep bass especially when the equaliser was used. Apple knew about this and eventually posted a hardware 'upgrade' - however I do not know if this cured the problem as I then bought the Sony A3000. I would like to get the new Ipod but not if this problem still exists.
HTH
Brian
Similar Messages
-
I have a Mac Book Pro 2.4 GHz Intel Core i7; Memory 4 GB 1333 MHz DDR3
Mac OS X Version 10.7.5
I updated to iTunes 12.0.1.26 and I am trying to burn a playlist and I get the following message: "Disc burner or software not found" . I have burned lots of CD's and DVD's before and this is the first time I get this message and cannot burn anything. Can anybody help me, please?Hello queenabs,
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting the error, "disc burner or software not found." I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I cannot see any videos due to blocked plug in. I tried to down load adobe flash and still have problem. can any one help
Hello,
Safari, blocked plug-ins…
http://support.apple.com/kb/HT5271 -
Over the last few days I haven't been able to download any app. can any one help me, please ? thank you.
Andrea...
You posted in the "Using Mac App Store" forum but your profile indicates you are using an iPad so that's what I'll try helping you with.
On the iPad tap Settings > General > Reset > Reset Network Settings
Then restart the iPad. Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If you still can't download apps, the problem may be your Wi-Fi connection > iOS: Troubleshooting Wi-Fi networks and connections -
'Erase All Content and Settings' i selected it and it's taking too long it's not even loading! Is it really tooks a several hours ? is there any problem how can i fix it. Please tell me
Likewise bro... atleast mine has the Apple logo... and the circular thing... I saw this online and i'll be trying it ASAP... http://support.apple.com/kb/HT1808
-
HT1338 can't get my camera to work with Skype can any one help me please
cant get my camra to work with skype can any one help me please
You posted in the OS X 10.3 forum instead of the Mac Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
What OS X version are you using?
Cheers, Tom -
I have changed my apple I'd primary email account and saved the changes yet when I try to buy from the App Store it still lists the old email address- can anyone advise how to fix this?
What id shows at the bottom of the Featured tab in the App Store app ? If it's the old email address that you had on your account then try tapping on it and log out of your account and then log back in and see if that 'refreshes' the account on the iPad.
-
Can some one advise between a LCD or Plasma, HDMI or RGB
Hello
I looked at threads to see if people got there plasmas or LCD displays to work with DVA to HDMi adaptors and got so confused that i decided to post asking which ones work rather then digging to find out in the trials and errors in between.
I am asking who got there (Plasma or large LCDs) to look sharp and work great?
So can anyone recommend a good, large compatible and working TV display with the mac mini ?
Is LCD more clear then Plasma when using your screen as a desktop to work in photoshop for example?, or is ADC, HDMI better then RGB on a 42" csreen (plasma or LCD) ?
ThanksThanks for your posts,
i am still asking that question as to which display has been tested that works digitally so i can use it as my computer screen.
Plasmas seem like regular TV sets at some point, too bright and lack of sharpness, although i am into getting one since the are bigger then LCDs and cheaper.
But i stood a distance from several TVs the other day and noticed that Plasmas where hazy and lacked sharpness over all next to LCD screens., maybe the ones i was looking at where terrible., hard to say since at another store i could not tell the difference with some.
Now i have these questions:
1-What is the right resolution i should look for so that i can connect my powerbook or mac mini and use it via digitally like i do with my Apple cinema display?
I like to have the biggest screen possible.
2-Would it be safe to say LCD is the way to go digitally here?,or RGB is just as good?
3- Which way to connect is also what i need to know so when i ask for a TV at a store, i can narrow down my options.
So is it plasma or LCD, HDMi or RGB, and what resolution? -
Can any one advise me if the new ipod nano 7th gen has a sleep timer on it?
I have just be giving a new style Ipod Nano 7th gen for christmas and wanted to know if it has the facility of playing music and setting up a sleep timer alarm so that it switches itself off after either 30min or 60mins?
I have had an ipod nano 4th gen for about 4 years and it has this sleep timer facility on it which i absolutely love and use every night.
So can anyone advise me on this and if it does still have this facility on the newer model that would be great and how i would go about setting it up on my new ipod nano 7th Generation.Thank you Chamar for replying to me, i will have a look at printing of the full manual and having a proper read throught it.
Happy New Year to you all. -
HT201210 error 1015 how to resolve it can any one tell me please
any one help me how toresolve it 1015 error
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743
ERROR 1015...
This Error Code is indicative of the Device being jailbroken / Hacked...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere. -
I have logged into citrx and can see the home page with all the applications from my work environment but when I click on them they wont open and safari tells me it can access them as it has no available application to access it any help would be great as my work help desk has referred me to apple
I have logged into citrx and can see the home page with all the applications from my work environment but when I click on them they wont open and safari tells me it can access them as it has no available application to access it any help would be great as my work help desk has referred me to apple
-
Can some one help me please / comment box ?
hi im very new to dreanweaver and i have a big problem, I
have a uni project to be in on friday and i need to put in a
comment box which links to my email and i cant find a clear
tutorial and is ther a way of doing it with out complicated html?
I also have aproblem with making my pages fit or expand to th
different screen sizes. i imported the back grounds fas png from
illustrator is ther conversion i nead to apply ?
Can some please please shed some light pleaseWell without seeing your design, I can tell you that in order
to make your webpage expand and contract based on the screen
resolution will require that you use possibly repeating backgrounds
in table cells or layers that have widths based on percentages
rather than pixels.
As far as a comments box goes, based on your description it
sounds like you need a contact form to submit information to an
email account as opposed to a comments box (
http://www.shoutpro.com/ - that
is a comments box).
If you need a form to mail to an email you should consider
what you can run on your server. More than likely, even if PHP is
available it would be blocked by your server so you would have to
use cgi for mail. So I would recommend trying this script:
http://www.scriptarchive.com/formmail.html
It is fairly simple, you just have to point your form to the
CGI file that is include in the script. Then there are instructions
on the site telling you how to edit that CGI file to send an email
to where you need it to go. Hopefully this is what you are looking
for. If you have any questions about it feel free to post
back. -
I cannot access the app store with my ipod 4g, can any one help me please?
For some reason i am unable to access the app store on my ipod touch 4g or even syn on the pc the app that i have down loaded. Please help me.
What happens when you try? Error message?
Have you synced apps from that computer/iTunes library? You can only sync apps from your one syncing computer. -
Hi there could someone out there please help i've got a Iphone 4 running on IOS 5 and it will not come out of recovery mode> It comes up with the error code -1 which i've looked everywhere on the web but no one seams to have the same issue.
This is a reconditioned replacement phone from the apple genius guys which i paid £130 for and only got 3 months warranty with and as soon as the warranty run out it crashed on me and never been able to get it back out of recovery mode. I've been back to the apple genius guys and they have told me there's nothing they can do other than charge me £130 to take the phone off me and give me another reconditioned phone with a 3 month warranty. Which as you can properly tell i dont want to.
PLEASE PLEASE HELP ME thanks for your timeThis is a bad hardware error, Baseband Error. Some have reported getting through this error by Restoring iPhone with the SIM Card removed. Try that. Try restoring with different computer. Search Web some more for other thoughts.
-
Definitely a new problem..Can u help me..please
Dear guys...
I have a strange problem..I have a two applets in a HTML page.
1. Applet ReadCounter - signed
2. Applet ControlCenter - not signed
These two applets are packed into a jar file WHICH IS SIGNED WITH A VALID CERTIFICATE and that is referred in the ARCHIVE tag.
<html>
<head>
<script language="JavaScript">
function doIt(){
var ctrl = document.applets[0];
alert(ctrl);
ctrl.setValues(10);
</script>
<body>
<OBJECT id="prox" classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" WIDTH = "3" HEIGHT = "3" codebase="http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,0,0">
<PARAM NAME = CODE VALUE = "ReadCounter" >
<PARAM NAME = CODEBASE VALUE = "." >
<PARAM NAME = ARCHIVE VALUE = "allrequiredFile.jar" >
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.3">
<PARAM NAME="scriptable" VALUE="false">
<PARAM NAME="MAYSCRIPT" VALUE="true">
<COMMENT></COMMENT>
</OBJECT>
<EMBED name="prox" enablejavascript="true" type="application/x-java-applet;version=1.3"
CODE = "ReadCounter" MAYSCRIPT=true ARCHIVE = "allrequiredFile.jar"
CODEBASE = "." WIDTH = "3" HEIGHT = "3"
pluginspage="http://java.sun.com/products/plugin/1.3/plugin-install.html">
</EMBED>
<applet code="ControlCenter" name='ControlCenter' width ="10" height ="10" archive = "allrequiredFile.jar">
</applet>
<form>
<input type=button name="test" onClick="javascript:doIt()">
</form>
</body>
</html>
When I load this page, I am
These are the methods available in those two applets
=================================================
1. ControlCenter.java(..extends java.applet.Applet) has
public void setValues(int arg)
2. ReadCounter.java(..extends java.applet.Applet) has the following methods()[...for some serialization/deserialization to happen]
public void init(){
readObject();
public void readObject()
public void writeObject()
When I load the html page, I am getting the dialog box to grant permission for the applet to read the data from the local hard disk
(Please note that the init() of ReadCounter applet is calling
readObject() which reads some values from the local drive) and I am granting the permission.
Now the problem is, I am calling a method in the ControlCenter applet by saying like
document.applets[0].setValues() from the HTML page using javascript...This method will in turn call the readObject method of the ReadCounter by having a ReadCounter object...something like
ReadCounter rc = new ReadCounter();
rc.readObject();
Now the rc.readObject() is supposed to read some data from the local hard disk and where the problem starts. The whole code works fine in IE..but in Netscape4.77/6/7.0 are not able to do this operation. My questions are
1. Is it because I have not declared the ControlCenter applet too to use the plugin? Thats why the ControlCenter class, when referred from javascript, not able to read the value from the local drive?
2.If I make ControlCenter applet also to use the java plugin then how can i invoke a method inside the ControlCenter applet using javascript?
I tried document.applets['ControlCenter'].setValues()...this is not working in Netscape versions, because once I make the ControlCenter to use the plugin, I am not able to refer the embedded object in Netscape. document.embeds[0] is not giving me any values. How do i solve this?
3. Generally, How do i refer an embedded object, which is embedded using <EMBED SRC=.....> in javascript, so that it will work in netscape? I am not able to refer it in javascript
4. I cannot set permissions within the code itself using enablePrevilege etc..for IE and Netscape..since this does not work with IE6.0 with java plugin 1.4 installed ..I cannot instruct my client to disable the plugin if any installed, to make the code work...so I cannot go for this option of com.ms.security for IE and some enablePrevileges etc. for Netscape.
Please help me out of this problem...thanks a lot in advance
Sriram.Ktry adding MAYSCRIPT to your applet tag and see if it makes any difference, e.g.,
<applet code="ControlCenter" name='ControlCenter' width ="10" height ="10" archive = "allrequiredFile.jar" MAYSCRIPT>
</applet>
;o)
V.V.
Maybe you are looking for
-
9.2.0.6 Install on Client?
Do I need to install the 9.2.0.6 patch on the client or is this a server side only patch?
-
Windows 8.1 Pro join to domain issues....
We bought some Windows 8.1 laptops and purchased the upgrade to the Pro version. When I attempt to join the laptops to the domain, it prompts me for domain credentials, I enter them, and I get an error.... Changing the Primary Domain DNS name
-
Once i Plug in my ipod my name is not shown where it is somewhere near genius on itunes and then their is something else that pops out that supposed to say "my name device" etc.... but it says someone else's.
-
Redownloading Files in CC.
Dear Adobe, In Adobe Creative Cloud, you aren't able to redownload files, which can be a propblem for those with on going projects such as myself. Please fix this in the near future if you can. Thanks,
-
i have a motor which rotates in clockwise if switch s1 is actuated or rotates in Anti-clockwise if switch s2 is actuated. (both are separate switches) In my logic it is stated that s1 state must be saved . (can i use a flip flop or latch or shift r