Bass Redirection doesnt work prope

Hi!
I got audigy 2 zs. Installed are all new driver. But . I set it to 20HZ. Now when I play a 50HZ sound, my subwoofer will play it. wheres the problem?

But thats no real bass redirection, thats toy stuff. Every A/V Recei'ver cuts it off at the freqeuncy u set it. Additional, setting bass redirection to 80HZ and playing 250HZ, it will be redirected.

Similar Messages

Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)

SWindows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)% Greetings,
Today I ugraded to Windows 7 Ultimate 64 bit edition and am having a problem with my 5. surround sound that previously worked perfectly in Windows Vista Ultimate.
I am using an X-Fi XtremeGamer PCIe card and the problem is that I have full working surround sound, but the bass/ subwoofer isn't working.
Previously in Vista I enabled bass redirection in the Creative Console and this would make the subwoofer work. In Windows 7 in the console there is a bass redirection option but it doesn't work. Also in the Creative Audio Control panel there is NO option for bass redirection either.
Audio sounds tinny and I am 99.9% everything is set up correctley, I think this is a driver problem. At this moment I'm unsure if this issue plagues both the 32bit and 64bit versions of Windows 7 or just the 64bit version (since the console launcher is 32bit).
Anyone had a similar problem and cracked it's Apart from this small glitch Windows 7 is great!
Thanks!

WRe: Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)h heya, I have exactly the same problem.
running 64-bit windows 7, X-Fi Xtreme Audio sound card, Trust 5. speakers.
the bass used to work in XP because I could enable bass redirection and alter crossover frequency.
these options are now no longer available in the windows 7 drivers (.4.90) and my bass is not working at all.
it is very annoying, there has been no comment from creative than i can find because it only appears to happen to a small percentage of speakers.
basically if someone from creative can't help fix the problem,?people with this problem?will unfortunately be forced to purchase a different brand of sound card because my speakers certainly aren't broken and work with the on-board sound fine.
so if anyone else has the same problem or any advice on how to fix the problem, please comment.

Bass redirection is miss

I'm very sorry I don't know English language well. After installing WinXP SP3 with latest drivers and console launcher from official website, I found that Bass redirection button is missing. Before this I had windows vista and bass redirection button was placed in speaker setup tab, but now it's just gone. And if I'm enabling 2 speakers instead of 5 , bass boost button is also missing! Please help, those options are important to me. my card is Soundblaster X-Fi extreme musicMessage Edited by twiggy206 on -24-2008 02:34 PM

I have the exact same problem.
I just bought the card yesterday. And I thought ok lets see what it can do. I put 5. speakers mode, i enable bass redirection to subwoofer and what i heard was terrible distortion. (I have a stand-alone self-amplified subwoofer). Just to be sure that this wasn't an issue of my subwoofer, i connected the subwoofer output to a normal speaker, the sound was crap, distortion and "garbage" was coming out from the x-fi...
I'm using vista x64, luckily i have windows xp installed and I tested the card there, no problems whatsoever with XP, Bass redirection was working as it should be. So that ruled out a faulty device.
Today I tested it with Vista 32, same distortion here as well.
This situation is awful, cause you cant listen to music and any kind of stereo (2-channel) sound using the subwoofer...
IMHO this is a serious flaw of the Vista 32/x64 driver for this card please look in to it!
ps.
Few years ago (200 or 2002) I bought the Soundblaster Extigy for about 200 euro (~ $250) and one would imagine for such expensi've and great product creative would at least release drivers for Vista but nooo. This angered my so much that I said I would never buy creative products again. But I thought since X-Fi USB came out I would give creative another shot. So imagine my frustration when again with a brand new soundblaster, it has such unacceptable issues in Vista.
Message Edited by mkMoSs on 02-06-2009 0:2 [email protected]

Audigy 2 ZS, Vista x64: Finally got bass redirection working!

=Audigy 2 ZS, Vista x64: Finally got bass redirection working!B Hey guys,
I have hooked a Teufel Concept G to my Audigy 2 ZS. The Speakers do not have internal cross mix, so unless the sound card provides a bass signal there will be NO bass at all. This has not been a problem under linux, since it automatically configures the sound card to send out bass, but very frustrating in Windows Vista x64. GTA4 is no fun without bass ;-)
After endless searching and messing with different drivers (breaking the whole vista sound system) I coincidently got bass redirection (and CMSS2 apparently) working today.
These are the steps I took:
. Fresh install of Windows Vista x64
2. Installation of Audigy 2 drivers provided by WindowsUpdate, did not download from Creative Labs
3. Use an old CtPanel-App which actually could activate bass redirection and CMSS2?
I uploaded the App:?
http://www.megaupload.com/?d=L6J0ZJVA
If you start the App it will take ages until it pops up, but then it works just fine. Feedback appreciated!
regards
Tiedemate?

I also have the same problem, sound stop working after getting SP2, I updated vista to SP2 because I want to update to windows 7, with win 7 I have try all the drivers without success I still have no sound and with some drivers I get a blue screen. After 2 restarts windows 7 ask me to fix the problem with restore and vola everything works ok but no sound.
I am trying this:
http://forums.creative.com/showthread.php?=35324

Fujitsu fi-6130z scanner doesnt work on Windows server 2012 using Remote Fx USB Redirection

I'm using Wyse WES7 SP1 client and using RDP, i'm connecting to RD Host Server 2012 standard edition with Remote FX enabled. scanner is able to redirect using Remote Fx and i've installed appropriate scanner driver on server. the scanner is listed in Device
and Printer option of Control Panel.
I'm using MSPaint application to scan my document, but when i click on From Scanner or camera, it dispalys
"Unable to Retrieve picture from device.Verify the device is properly connected and try again" warning message. i couldnt able to scan the document.
But with Wyse TCX USB redirection it works fine.
Is there any server side configuration for the scanner to redirect and work properly ? am i missing something ?
Kindly helpp me to troubleshoot this problem
Raveendra Pai

Did you ever get this working? I am having similar issues trying to redirect a 6130z thru RDP to a 2012 R2 server.

My analogue 5.1 Sound System doesnt work on Soundblaster live 24-bit soundcard

Hello!
I have a WavemasterMX-5 5. Surround Sound System with Subwoofer (=http://www.hms-media.de/EN/?Tab=Products&Group=3&Product=7) and it doesnt work on the Soundblaster li've 24 bit.
I have installed all the drivers properly and the card seems to be working ok.... 
But i have a analogue Surround Sound System what must i do to get this working?
Is it possible to add a converter that can transform; digital to analogue signal? Or can i change some settings >?
Plzzzzz Help me !!! I love my music :smileyindifferent:
Greetz Axz:.

> i have surround sound only when i play *.acc files but with *.mp3 files it doesnt work
You'll have to enable surround matrix decoding for stereo material. There are several analog encoding standards (Dolby Surround, Dolby ProLogic, Dolby ProLogic II) but Creative's driver doesn't have an official decoder for any of them Instead, they provide their home-grown decoders and call them CMSS or DTS NEO:6. I can only assume they want to dodge Dolby's license payments by not supporting familiar standards. Anyway, you will find the CMSS modes in the driver or, in case of NEO, in their mediasource player. NEO - because it's in a player and not in the driver - is out of reach for other players such as WinAmp or multimedia and TV software.
If you plan to listen to music only, the Creative CMSS matrix decoders ("upmix") might satisfy you. If you plan to watch movies or watch TV, you will find that, with exception of DTS NEO:6, they are not good at all. A ProLogic II decoder sounds much better. If you are lucky, your player has a software ProLogic decoder. For example, WinDVD has one. Unfortunately, in that case the soundcard's high tech DSP - which you payed $$$ for - will not be used at all.
An alternati've solution for non-gamers (for movies and music) is to install the kx driver from the kx project at http://kxproject.lugosoft.com/index.php?language=en
For music, this driver - strangely enough - not only sounds better than Creative's own player, it is also far more configurable. For example, if your center speaker is from a differerent brand than the main speakers, you can put an equalizer before it. Or you can redirect bass from small speakers to larger speakers and not just to the subwoofer, as is the case with Creative's drivers. The options are endless. You can even create totally different configurations for different situations (movie/music/...) and switch on the fly. Other benefits: the driver is very small and very fast, everything happens instantly. However, its user interface is weird and the project lacks documentation. You will need determination on the first day. Afterwards, you will be able to configure your music/movie system to sound far better than with Creative's driver and customize details that simply can not be customized with the official driver. And the best thing: everything will run inside the card's DSP and the computer's CPU is free to do other stuff. Btw, the link above leads you to the last official release. If you read their forum, you will find a more recent beta release from this year.Message Edited by mirko on 0-2-2005 0:22 PM

Bass Redirect in Vista x64 w/ XI-FI 2.13.0

Hi everyone,
My apologies if this question has already been answered (and often,) but I couldn't find it while searching.
Anyway, on my old PC with Windows XP (and then Vista) 32 bit, I was able to use my X-Fi's bass redirect function to spread out the bass over my front speakers. I've since moved my soundcard to a new PC featuring Windows Vista x64, and I can no longer find this feature.
Does anyone know if the latest Vista drivers (2.3.002) support bass redirect, and if so, how I might locate the feature?
My card is a Sound Blaster X-Fi Platinum Edition. Btw, I thankfully haven't experienced any other problems with the card / driver / OS combination. The card sits in an nForce 680i moBo and is situated in the lone PCI slot between the two PCI-E x6 slots.
Thanks,
Mark.

Hmm.. Very interesting. I'm downloading now (hopefully it will be finished by the time I arri've home from work -- it's a very sllllloooow download at 20 Kpbs.) Btw, does anyone know if this works on Vista x64 as well?
Mark.

Ipod universal dock and remote doesnt work!!!!!

I'm fairly new to the whole apple and ipod thing, i bought an ipod nano last week and bought a universal dock with remote today (proper apple one), but the menu button on the remote doesnt work(it does on the ipod itself but thats not the point) so i cant go 'back' from an album i'm playing to find another one i want to play. the volume works fine as does the track back and forth and play pause. But my menu button on the remote doesnt work, this is incredibly frustrating!!!!!
Can anyone help?
one more thing it's not a fault with the remote as my brother has a mac mini with a remote which works fine with his, but the menu button again isnt recognised on my dock!

If you read the manual, you'll see that the menu button is for other devices, but not our Nano's. Apple doesn't make this clear on it's website, IMO. Had I known this, I would not have bought a u-dock. Plus, when my Nano is docked, I can't use the lower 1/3 of the wheel, as the Nano sits too low for my fingers to reach. It's going back to the store next week.

How to get bass redirection/Vista Ultimate x64/Audigy 2

This is how I got 2. sound working again (no CMSS "double"-stereo so far, which would be 4., but at least it sounds right now) on Vista x64 and an Audigy 2 ZS.
First of all, get rid of anything creative driver related (in my case, the January Beta), reboot. It should not know both the Gameport and the Soundcard. Then, run the installer with the "No driver for the Gameport found" window open. Install the Audio Console, don't reboot yet, open the Gameport window, say "look for a driver online etc." which should result in some "This inf is for Win98 and up" error. Ok, reboot. The Gameport will not work, no matter what you do ...
Go to the Audioconsole, select 5., insert your original Audigy 2ZS driver CD. Open "Audio\SpkSet", right-click the "setup.exe" and select run in compatibility mode for Windows XP SP2. Then, right-click and "Run as administrator". Should take looong (a few minutes), but it installs the Speaker Settings. You can run them from Start Menu->Creative->Speaker Settings, enable bass redirection, done. Didn't work with the beta drivers here because the speaker setting installer complained about no matching hardware found.
Note, the drivers are still WDM based (i.e., actually XP x64 drivers) and not UAA based, so the XP software finds the same hooks. Curious when a /real/ Vista driver will appear (i.e., not WDM based). See http://en.wikipedia.org/wiki/Windows_Driver_Model & http://en.wikipedia.org/wiki/Uni'versal_Audio_Architecture
Sound quality is a bit lower than on XP (it sounds as if the amplifier has some problems, when I have some bass the rest becomes quieter, which didn't happen on XP, and I have the feeling there is some high-frequency noise floating around ... couldn't equalize it yet), but I have no hickups or scratches.Message Edited by Audigy2ZSUser on 03-0-20070:5 AM

And exactly why don't you simplay use the audio console 2.40.09 which works perfectly with bass redir on vista32 and 64?

Menu button doesnt work

All of a sudden the menu button stopped working. It was fine one day then I put the ipod on charge, several days later when I tried to use it again the Menu button no longer works...
Actually I just realized that the Play/Pause button doesnt work correctly either. When you push and hold it it does not turn the device off anymore although it would still pause/play the songs. The forward/reverse work ok.
I tried resetting the Ipod using the updater and that didnt help. I also tried Menu + Select ... strangely enough it resets the device but after it resets the Menu key doesnt work.
Has anyone experienced this problem?
I submitted a service request. Is there any way of modifying the service request since I just realized that the play/pause button is screwed up also?
Finally, when you turn the hold on/off is that supposed to turn the backlight on/off as well? I never paid attention to it but now when I turn hold on that also turns the backlight on...is that screwed up as well?

I am having a similar problem with my mini - it turns on fine and will scroll through the menus, but will not respond by going back through the menus. Instead, it freezes on a screen and does not respond to anything except resetting it (menu & select button). Doesn't seem like the proper way to navigate through the screens and is completely frustrating. I was ready to cry yesterday at the gym because it wouldn't work and didn't know the reset "trick" until 3 hours later! I have also had many problems turning it off too. My brother who owns a regular iPod thinks I am crazy but at least I am seeing people out there with similar problems.
On another note, I have to say I am completely disappointed with Apple. The company loves to portray this user-friendly persona, but in truth it is not that way at all. I received my mini in May and have just started to use it full force this month (October) ... now my 30-day phone support has expired and if I want "live" help I have to pay $50 for extended service. That's bull - I'd like some real answers but have been relegated to chat boards (no offense) and trying to troubleshoot the problem myself by finding close but not exact postings. It seems like such a deceptive bait & switch ploy by Apple. I am tempted to send my mini back for service but just read on the web site that I could be charged up to $100 for service. Again, sounds very sneaky so not sure if I should take the risk or live with a highly annoying product defect. Any suggestions?

Cisco ISE guest portal redirect not working after successful authentiation and URL redirect.

Hi to all,
I am having difficulties with an ISE deployment which I am scratching my head over and can't fathom out why this isn't working.
I have an ISE 3315 doing a captive webportal for my guest users who are on an SSID. The users are successfully redirected by the WLC to the following URL:https://x.x.x.x:8443/guestportal/Login.action?portalname=XXX_Guest_Portal
Now when the user passes through the user authentication splash screen they get redirected to https://x.x.x.x:8443/guestportal/guest/redir.html and recieve the following error:
Error: Resource not found.
Resource: /guestportal/
Does anyone have any ideas why the portal is doing this?
Thanks
Paul

Hello,
As you are not able to get the guest portal, then you need to assure the following things:-
1) Ensure that the two Cisco av-pairs that are configured on the authorization profile should exactly match the example below. (Note: Do not replace the "IP" with the actual Cisco ISE IP address.)
–url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
–url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also defined on the access switch)
2) Ensure that the URL redirection portion of the ACL have been applied to the session by entering the show epm session ip command on the switch. (Where the session IP is the IP address that is passed to the client machine by the DHCP server.)
Admission feature : DOT1X
AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
URL Redirect ACL : ACL-WEBAUTH-REDIRECT
URL Redirect :
https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
0000A45A2444BFC2&action=cpp
3) Ensure that the preposture assessment DACL that is enforced from the Cisco ISE authorization profile contains the following command lines:
remark Allow DHCP
permit udp any eq bootpc any eq bootps
remark Allow DNS
permit udp any any eq domain
remark ping
permit icmp any any
permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
permit tcp any host 80.0.80.2 eq www --> Provides access to internet
permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
port
permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8906 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
deny ip any any
Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on the switch as follows:
ip access-list extended ACL-WEBAUTH-REDIRECT
deny ip any host 80.0.80.2
permit ip any any
5) Ensure that the http and https servers are running on the switch:
ip http server
ip http secure-server
6) Ensure that, if the client machine employs any kind of personal firewall, it is disabled.
7) Ensure that the client machine browser is not configured to use any proxies.
8) Verify connectivity between the client machine and the Cisco ISE IP address.
9) If Cisco ISE is deployed in a distributed environment, make sure that the client machines are aware of the Policy Service ISE node FQDN.
10) Ensure that the Cisco ISE FQDN is resolved and reachable from the client machine.
11) Or you need to do re-image again.

Bass Redirection on an Audigy SE in Vi

Either I'm just being paranoid of wanting my bass working as good as it should or there is something not right with the Audigy SE and Vista.
Everything else is fine for sure except with the bass. I've tried the registry mod for the enhancements tab on the following link:
http://forums.creative.com/creativel...ssage.id=24583
Makes it sound great but one problem I have with it is that the only format options that can be selected after using that modification with the registry are in 48khz and there are no 96khz options available like there should be.
The "Audio Center" program found on these forums do not seem to do anything with bass redirection other than make it worse with the current drivers. Also the Audio Console that is combined with the drivers would be great if it had a Bass Management section in them.
Just wanted to ask on these forums seeing as I'm not sure if I'm just not doing something right or just an issue thats been floating around.

"Makes it sound great but one problem I have with it is that the only format options that can be selected after using that modification with the registry are in 48khz and there are no 96khz option available like there should be"?did you ever notice any real sound improvement by selecting 96000 Hz? I would be really surprised...

SoundBlaster 5.1 VX and Windows7 Bass redirection

Hi,
i have a SoundBlaster 5. VX and an analog 5. surround system. My OS is Windows 7 final.
I can't get my subwoofer to work. I set my speakers to 5., tested them and every speaker including the subwoofer works. But when i try to play music in windows media player or any other program i get no bass (already tried the driver that comes with windows and also the driver on the creative page).
I got it to work in (and only in) winamp by installing a plugin. But i do not hope that i have to find and install a plugin for every program that playes media files such as kmplayer, vlcplayer, dvbviewer, and so on.
There HAS to be a way to tell windows in general, that i HAVE a subwoofer, and that it should be used. I googled about the bass redirection and found many other people who have the same problem. There were some solutions, i tried everyone (different drivers, different settings, ...) and nothing worked.
Is there a way to get Windows itself to redirect the bass to the subwoofer? After searching and trying now for 5 hours i really don't know what to do any more. I hope there is a way to fix this ... just don't want to buy another soundcard just because of that!
Thanks for your help in advance!

Re: SoundBlaster 5. VX and Windows7 Bass redirection? "go to control panel and sound and then to speakers, and to configure and do not check or should I say uncheck full size speakers"
did this. what it changed: i don't hear anything on the center speaker now too, only left and right are working.
in control panel - sound - speakers - properties - i see:
tab general, levels, sound blaster, advanced
but i dont see "tone" anywhere on any of these tabs (i can in/decrease the levels of all of the 6 speakers, but it only has an effect on "left" and "right").
in the "sound blaster" tab i also disabled the sound blaster enhancements, and in settings there i ticked off every option, restarted the sound application (i tried several), ticked them on - and nothing changes.
many thanks for your quick reply!

Fix for Bass Redirection issue in sig

Hi everybody,
I have just ordered a Teufel Concept E 5. Speaker System. For that reason I'm now also dealing with the purchse of a 5. sound card. At first my favourite was the Audigy 2 ZS, but now I'm hesitating because I've read on several forums that the Teufel System also suffers from the Audigy series' malfunctioning driver-implemented Bass Redirection (an issue firstly reported 3 years ago, January 2002!!!) when it comes to upmix a stereo source to 5..
Just to remember: If Bass Redirection is unchecked in the drivers, the whole frequency spectrum of the stereo source will be directly sent to the front left/right channels (and no other channels), and the connected speaker system will have to split the frequency bands and feed its subwoofer with low-pass signals and the sats with high-pass signals (For example this is the case with Creative's own speaker systems which have internal crossovers). But most non-Creative 5. Systems don't have this internal functionality of mixing a stereo input up to subwoofer and sats. For such systems Creative implemented the "Bass Redirection" in their drivers: sub frequencies of the stereo source are low-pass filtered and sent to the discrete subwoofer output of the sound card. The issue is that this signal from the subwoofer output is too weak, forcing users to find workarounds to get bass when they're listening to stereo sources (such as Music in Winamp).
This issue, although known for 3 (three!!!) years now, has not yet been fixed by Creative. In late November 2004, Cat has replied to the Monster thread dealing with this issue on the old forums (http://uk.europe.creative.com/support/forums/thread.asp?thre=396&foru=5&page=34) (scroll down), promising to forward the issue to the driver dev team, but since that day nothing has happened anymore.
My question to the mods: is there a chance that this driver issue will be fixed in the near future? Otherwise I'll have to reconsider my options concerning my sound card purchase.
gre-ez
mcgyvrMessage Edited by mcgyvr8 on 0-20-2005 0:08 PM

I have the same thing with this option -and I asking for fix (again....)
I have Audigy 2 ZS OEM, Yamaha RXV-440 Home Cinema Recei'ver and big 5. home cinema speakers. Audigy 2 ZS is connected to Yamaha by 3 analog outputs (connecting it by spdif cause no CMSS stereo to surround upmix and only stereo sound for all none DD/DTS sound sources like MP3, games, mpg/DivX/XviD films...thats why I must connect them by annalog outputs/inputs).
When I disable bass redirection then speakers have full frequency response (20Hz - 20kHz) but there is no any signal on sub output (when I play stereo sound with CMSS Stereo Surround enabled).
When I enable bass redirection and set cutoff frequency to 70Hz then there is signal on analog sub out but speakers have bass cutted off (20Hz - 70Hz) and playing only frequencies from 70Hz to 20kHz
This option causing waste of basse from speakers (they have beatyful basse but no with this drivers).
Even when bass redirection is enabled, signal from sub output is very weak - I don't have so high sub volume regulation to turn it sound loud enough
I have this problems on SB Li've, I have this problem on Audigy 2 ZS and this problem still exist on Audigy 4 !!! (I'am using now modded Audigy 4 drivers to work on all Audigy series but there is the same problem as in orginal A2 ZS drivers).
I'am requesting only 2 fixes in drivers that is satisfy me completly (not only me - many people have the same problem):
. Add an option that will disable bass cutting from speakers when bass redirection is enabled or make bass redirection working only for subwoofer without any speakers frequency cutting.
2. Make signal from analog sub out louder because this volume level is not acceptable !!!
Please...
This problems causing that I starting to think about some other sound card from other producent...because that can't be Message Edited by FPPfan on 02-0-2005 08:52 PM

Every ID i add on here doesnt work...it keeps telling me that the ID in incorrect. What a pain in the rear. I will look for another site if they don't want my money.

Every ID i add on here doesnt work...it keeps telling me that the ID is incorrect. I will find another site if they do not want my money.

Recalling, it definitely was a fake update notification because it had 3 things to install and Mozilla never sends that. The toolbar and some search engine and I don't recall the third, but that was the start of it all. Ever since I have been getting these update notifications. I took you guys advice and used a link provided and went to Fire Fox and downloaded an upgrade. I bookmarked that link and to be safe from now on I will only download it manually from there. It is too bad because for years Fire Fox has been automatically updating but it seems like these phony installers link to a computer and harass them. There was a Google redirect and even a G-mail interference. Next thing I have to do is use those malware and virus cleaners and try and remove any tag links that might be calling these fake update notices. Another one that I think caused trouble is an Adobe Flash Player update. Same thing, Adobe always updated automatically, then it started trying to add these things same as Fire Fox. Thanks everybody, at least I know better what to look out for.

Bass Redirection doesnt work prope

Similar Messages

Maybe you are looking for