BAT file format

hello expert,
I have call manager 4.2 and i have a new field on the directory number of UserDeviceProfile, the new fields is "Forward Unregistered Internal" and "Forward Unregistered External".
I use the BAT file to create UserDEviceProfile and i need to use this new field "Forward Unregistered Internal". when i trid to create Bat file format i cannot found this field.
i had just "Forward No Coverage Internal" Forward No Coverage External" Forward No Answer External"
I dont know if is exist a new Bat for call Manager 4.2 to use this field.
thank you in advance.

Hi Jose,
I don't lnow why Cisco doesn't use the same wording, but these are the same thing :)
Forward Unregistered Internal = Forward No Coverage Internal
Forward Unregistered External = Forward No Coverage External
Try out a test BAT using these fields and you will see the proper config is actually setup.
Hope this helps!
Rob

Similar Messages

Adding phone file format

in cm6
i was able to add group of phones using the builtin excel and export to csv on bat.
i noticed that the csv text file can be seen on ADD FILE FORMAT with the FORMAT FILE NAME HAVING 2 options (default and simple)
i didnt do anything on this but as i said i was able to insert the group of phones.
just want to know what is the purpose of going to that procedure of adding file format..
thanks

Hi Celso,
These relationships are nicely explained in this doc;
Using a Text Editor to Create the CSV Data File for Phones
You can create the CSV data file by using lines of ASCII text with values separated by commas. The comma separated values (CSV) file provides textual information in tabular form.
Use one of these file format options to identify the device and line fields within the CSV data file:
â¢Default Phone-Contains a predetermined set of phone device and line fields.
â¢Simple Phone-Contains basic device and line fields for phones.
â¢Custom-Contains device and line fields that you choose and order yourself.
You cannot modify or delete the Simple Phone or Default Phone file formats.
Note: When you use the Cisco Unified Communications Manager Bulk Administration (BAT) spreadsheet to create the CSV data file, you can create the file format within the spreadsheet. When you use a text editor to create the CSV data file, you need to create a file format or use the simple or default file format. You enter the values in the text-based file in the same order as specified in the file format.
Phone File Format
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/6_1_1/t03phfmt.html
Hope this helps!
Rob

Bat.file in background

i want to hav a bat. file (matrix) as a background in windows.
how do i do it, or should i save the matrix as another format/type?
here is the matrix file:
@echo off
pause
color A
mode 1000
:matrix
echo %random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%%random%
goto matrix

I felt sorry for the little guy. I have a friend who's 7 year old wanted one of those. Here is his solution:
http://www.ticalc.org/archives/files/fileinfo/303/30391.html
It is an older screensaver that does that.
To animate the desktop takes a very special program that can write to the desktop. If you are an experienced Windows programmer then you can do it. It is not something a kid can easily do although some kids are pretty smart.
What we see in the movies is usually a screensaver or a window with no chrome running full screen.
There are also web sites that display this random pattern in a full screen browser. I couldn't find the web site but look and you will find.
¯\_(ツ)_/¯

Create a Package in SCCM 2007 to use a robocopy bat file

Hi
I’m setting up a package for Robocopy that copy files from C drive of a target machines into a network share.
This is the robocopy bat file i am using:
ROBOCOPY "C:" "\\servername\Test" /tee /e /eta /copy:dt /r:01 /w:01 /log+:"\\servername\Test\testLog.txt"
/if *.doc *.xls *.ppt *.pdf *.msg *.pst *.jpg *.zip *.txt
t
-I Set up a package with this batch file
-Added a program to the package pointing to this batch file
general program properties are:
Run:Hidden
After running:No actionrequired
Environment:
Run with administrative rights
drive mode: Runs with UNC Nam
-Advertised it to a collection
But when after the advertisment i get the following error and nothing gets copies:
Script for Package:CHV02E94, Program: ITF Robocopy failed with exit code 16
Any advice

I tried to test the same thing using a local source to get the script to work first and once this is working I will change it back to network share. This way i can eliminate possibilities of having any issues with permission and local system account.
Here is the batch file:
ROBOCOPY "C:" "\\machinename\Test" /tee /e /eta /copy:dt /r:01 /w:01 /log+:"\\machinename\Test\testLog.txt" /if *.doc *.xls *.ppt *.pdf *.msg *.pst *.jpg *.zip *.txt
Using local source is giving me still some issues. It seems like the robocopy.exe is using a default location as source other than C:\ which I want to. This script should scan the entire local C drive and copy any files that have specific
file format as above.
Here is the Execmgr.log error: Execution is complete for program ITF Robocopy Local2. The exit code is 3, the execution status is FailureNonRetry
The robocopy log shows this:
   ROBOCOPY     ::     Robust File Copy for Windows
Started : Sun May 08 09:19:51 2011
   Source : C:\Windows\System32\CCM\Cache\CHV02EB1.2.System\
     Dest : \\L3C84706457\Test\
    Files : *.doc
     *.xls
     *.ppt
     *.pdf
     *.msg
     *.pst
     *.jpg
     *.zip
     *.txt
Options : /TEE /S /E /COPY:DT /ETA /R:1 /W:1
                    1 C:\Windows\System32\CCM\Cache\CHV02EB1.2.System\
   *EXTRA File          0 testLog.txt
     New File       8714 New Microsoft Office Excel Worksheet.xls
0%
100%
                Total    Copied   Skipped Mismatch    FAILED    Extras
     Dirs :         1         0         1         0
0         0
    Files :         1         1         0         0
0         1
    Bytes :     8.5 k     8.5 k         0         0         0
0
    Times :   0:00:00   0:00:00                       0:00:00   0:00:00
    Speed :             1742800 Bytes/sec.
    Speed :              99.723 MegaBytes/min.
    Ended : Sun May 08 09:19:51 2011
why is the source location getting changed to ==>C:\Windows\System32\CCM\Cache\CHV02EB1.2.System\?????

File Format options not appearing in the Save As dialog box - InDesign CC

So i was working with a legacy file (an .eps from illustrator4) that i placed into InDesign CC, and when i went to export as a jpg, the option to choose a different file format from the bottom of the dialog box was gone. Did i hit some crazy shortcut to remove the options, or is this a bug that occurs when working with certain legacy files? I've restarted InDesign, rebooted my laptop, deleted my Adobe preferences, reset my adobe warning dialogs, and I still cant export or save as any other file format because the option doesnt appear. And it doesnt matter if i create a new file or open an existing one. Please help. See the pic below. No option for file format on the bottom of the dialog box.

Thank you very much!
Reinstalling worked, but i'd still kinda like to know what caused this problem & if this will continue to happen. To me, reinstalling is pretty much like having to reboot anytime you go to IT -- they dont know what the problem is, they just know how to fix/stop it.

Duplicate File Format options in Save As Dialog

I am getting duplicate file format options in my save as dialog. I am running photoshop 12.0.1 on mac os x 10.6.4.

Thanks for the answer, I have the same problem, happened after I uninstalled CS4, (using cs5 now) however I can't seem to find where the duplicates are located. Any tips as to where I should look?
Thanks in advance!

How to export table contents in xml file format through SQL queries

hi,
i need to export the table data in to xml file format. i got it through the GUI what they given.
i'm using Oracle 10g XE.
but i need to send the table name from Java programs. so, how to call the export commands from programming languages through. is there any sql commands to export the table contents in xml format.
and one more problem is i created each transaction in two tables. for example if we have a transaction 'sales' , that will be saved in db as
sales1 table and sales2 table. here i maintained and ID field in sales1 as PK. and id as FK in sales2.
i get the combined data with this query,
select * from sales1 s1, sales2 s2 where s1.id=s2.id order by s1.id;
it given all the records, but i'm getting two ID fields (one from each table). how to avoid this. here i dont know how many fields will be there in each table. that will be known at runtime only.
the static information is sales1 have one ID field with PK and sales2 will have one ID filed with FK.
i need ur valuable suggestions.
regards
pavan.

You can use DBMS_XMLGEN.getXML('your Query') for generating data in tables to XML format and you can use DBMS_XMLGEN.SETROWSETTAG to change the parent element name other wise it will give rowset as well as DBMS_XMLGEN.SETROWTAG for row name.
Check this otherwise XMLELEMENT and XMLFOREST function are also there to convert data in XML format.

ABAP to XML file - Formatting problem and UTF-8 requirement

Hi Everyone,
Could you please guide us on the ABAP coding required to get the proper XML file format. We have prepared the code for downloading SAP transaction data into an XML file format. However, we are stuck with an improper format as per Example 1.
The file format we get is this:
Example 1:
<?xml version="1.0"?><FDXLMDOrd><FXNHdrLp><CrtDtTm>20070613094517</CrtDtTm><MsgID>319304155</MsgID><MsgTyp>850</MsgTyp><MsgSubTyp>SALES_A</MsgSubTyp><Pr
<RcvTP>FSCS</RcvTP><SndSrc>FXN</SndSrc><RcvSrc>EIB</RcvSrc><UsrID>VAR</UsrID></FXNHdrLp><OrdHdrLp><OrdNbr>319304155</OrdNbr><OrdActnCD>9</OrdActnCD><Ord
teCarrReq>FDE</RteCarrReq><RteTptSvcReq>FEIP</RteTptSvcReq></DprtRteLp><SpecInstrLp><SpecInstrTyp>SHIP</SpecInstrTyp><SpecInstr>Example Packing Instruct
les Order</RefDesc></RefLp><RefLp><RefIDQual>CPO</RefIDQual><RefID>test 1 line 1 pc - s</RefID><RefDesc>Customers Customer Purchase Order</RefDesc></Ref
Typ><EntIDQual>91</EntIDQual><EntID>H00092</EntID><EntNm>VLAD BOBES</EntNm><Cty>MONTREAL</Cty><PstlCD>H3X 2N5</PstlCD><RgnalCD>QC</RgnalCD><CtryISOCD>CA
></AdrLnLp><ConLp><ConTypCD>IC</ConTypCD><ConNm>VLAD BOBES</ConNm><CommLp><CommNbrQual>TE</CommNbrQual><CommNbr>514-731-8361</CommNbr></CommLp></ConLp><
<Cty>MONTREAL</Cty><PstlCD>H3X 2N5</PstlCD><RgnalCD>QC</RgnalCD><CtryISOCD>CA</CtryISOCD><AddlNmLp><AddlNm1>VLAD BOBES</AddlNm1></AddlNmLp><AdrLnLp><Str
However, the format need to look like this as in Example 2 below.
We also need help in how to get " encoding="UTF-8"?> " as part of the file format.
Example 2:
<?xml version="1.0" encoding="UTF-8"?>
<FDXLMDProdRcpt>
    <FXNHdrLp>
        <CrtDtTm>20070612151817</CrtDtTm>
        <SessID>26796</SessID>
        <MsgTyp>861</MsgTyp>
        <MsgSubTyp>WRE_A</MsgSubTyp>
        <PrcsingPrty>5</PrcsingPrty>
        <SndTPQualCD>ZZ</SndTPQualCD>
        <SndTP>FSCS</SndTP>
        <RcvTPQualCD>ZZ</RcvTPQualCD>
        <RcvTP>EIB</RcvTP>
        <SndSrc>YANTRA</SndSrc>
        <RcvSrc>EIB</RcvSrc>
        <UsrID>VAR</UsrID>
    </FXNHdrLp>
    <ProdRcptHdrLp>
        <ShpID>VAR20070612NCHIC1</ShpID>
        <ShpTyp> </ShpTyp>
        <ShpActnCD>00</ShpActnCD>
        <InTransMrgTyp> </InTransMrgTyp>
        <ShpVolUOM>CI</ShpVolUOM>
        <ShpWgtUOM>LB</ShpWgtUOM>
        <ShpTotVol>310022.00</ShpTotVol>
        <ShpTotWgt>861.00</ShpTotWgt>
        <DtTmLp>
            <DtTyp>050</DtTyp>
            <DtTmQual>501</DtTmQual>
            <DtTm>2007-06-12T15:07:41-04:00</DtTm>
        </DtTmLp>
        <AdrLp>
            <EntTyp>RC</EntTyp>
            <EntIDQual>93</EntIDQual>
            <EntID>NCHIC</EntID>
            <EntNm>NCHIC</EntNm>
            <AutoCrtTrdPar>0</AutoCrtTrdPar>
            <AutoCrtTrdParRole>0</AutoCrtTrdParRole>
            <AutoUpdtTrdPar>0</AutoUpdtTrdPar>
        </AdrLp>
        <ProdRcptTptLp>
            <TptIDQual>BOL</TptIDQual>
            <TptSCAC> </TptSCAC>
            <TptID> </TptID>
Thanks and Best Regards
Sitaraman

You could try to use the following coding:
*& Report ZUS_SDN_UC_XML_TO_UTF8_TRANSF
REPORT zus_sdn_uc_xml_to_utf8_transf.
define local data
CONSTANTS:
gc_encoding           TYPE string VALUE 'UTF-8'.
DATA:
gd_result             type string,
go_ixml               TYPE REF TO if_ixml,
go_stream_factory     TYPE REF TO if_ixml_stream_factory,
go_encoding           TYPE REF TO if_ixml_encoding,
go_resstream          TYPE REF TO if_ixml_ostream.
DATA:
gt_knb1    TYPE STANDARD TABLE OF knb1,
gd_xml     TYPE string,
gt_xml     TYPE TABLE OF string.
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1 UP TO 10 ROWS
      WHERE bukrs = '1000'.
go_ixml = cl_ixml=>create( ).
go_stream_factory = go_ixml->create_stream_factory( ).
go_encoding = go_ixml->create_encoding( character_set = gc_encoding
                                        byte_order = 0 ).
go_resstream =
              go_stream_factory->create_ostream_cstring( gd_result ).
CALL METHOD go_resstream->set_encoding
    EXPORTING
      encoding = go_encoding.
XML Transformieren
CALL TRANSFORMATION id_indent
    SOURCE     itab = gt_knb1
    RESULT XML go_resstream.
APPEND gd_result TO gt_xml.
CALL METHOD cl_gui_frontend_services=>gui_download
    EXPORTING
     BIN_FILESIZE              =
      filename                  = 'C:\temp\xml_to_utf8.txt'
     FILETYPE                  = 'ASC'
     APPEND                    = SPACE
     WRITE_FIELD_SEPARATOR     = SPACE
     HEADER                    = '00'
     TRUNC_TRAILING_BLANKS     = SPACE
     WRITE_LF                  = 'X'
     COL_SELECT                = SPACE
     COL_SELECT_MASK           = SPACE
     DAT_MODE                  = SPACE
     CONFIRM_OVERWRITE         = SPACE
     NO_AUTH_CHECK             = SPACE
     CODEPAGE                  = SPACE
     IGNORE_CERR               = ABAP_TRUE
     REPLACEMENT               = '#'
     WRITE_BOM                 = SPACE
     TRUNC_TRAILING_BLANKS_EOL = 'X'
   IMPORTING
     FILELENGTH                =
    CHANGING
      data_tab                  = gt_xml
    EXCEPTIONS
      file_write_error          = 1
      no_batch                  = 2
      gui_refuse_filetransfer   = 3
      invalid_type              = 4
      no_authority              = 5
      unknown_error             = 6
      header_not_allowed        = 7
      separator_not_allowed     = 8
      filesize_not_allowed      = 9
      header_too_long           = 10
      dp_error_create           = 11
      dp_error_send             = 12
      dp_error_write            = 13
      unknown_dp_error          = 14
      access_denied             = 15
      dp_out_of_memory          = 16
      disk_full                 = 17
      dp_timeout                = 18
      file_not_found            = 19
      dataprovider_exception    = 20
      control_flush_error       = 21
      not_supported_by_gui      = 22
      error_no_gui              = 23
      OTHERS                    = 24.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.
However, I like to mention that the file created from out ECC 5.0 (6.40, non-Unicode) contains a special character between the XML header and the data part (when displayed using NotePad Editor):
...xml version="1.0" encoding="utf-8"?>[special character]<asx:abap xmlns:asx="http://www.sap.com/a...
Using a HexEditor the special character (0x0A) is displayed as a dot.
Also Check with FM - TREX_TEXT_TO_UTF8
Reward Points if it is helpful
Thanks
Seshu

Does the file format differ when you Publish locally to hard drive vs. to the Connect Pro server?

I notice that when I publish locally to my hard drive to review a set of slides, I see a folder full of files. If I click on index.htm within the folder, I can launch the slides.
When I publish to the Adobe Connect Pro server, I merely see a url for the link to the course.
I'm not sure what this url link represents (as far as the file format is concerned):
Has the presentation been converted to different file format than what is published on my local drive? If so, what format is it in?
If the presentation has not been converted, does the directory structured published to my local drive get replicated on the Adobe Connect Pro server, and the url is merely a link to the "starting file " within that folder (say, index.htm)?

The published output does not differ between publishing locally and publishing to Connect. The URL on the Connect server does, ultimately, point to the Index.htm or viewer.swf file.

Running a Bat file from a stored procedure

This is part II of Re: Need to run bat file from application express
I thought I would open a new thread
I thought I had this fiqured out but it still doesn't work
1) I granted CREATE EXTERNAL JOB to my user
2) startup the OracleJobScheduler Service
3)
create or replace
PROCEDURE RUN_OS_COMMAND(p_cmd IN varchar2)
is
v_job_exists pls_integer:=0;
begin
select count(1)
into v_job_exists
from all_scheduler_jobs
where job_name='JAVA_EXE';
if v_job_exists>0 then
    dbms_scheduler.drop_job(job_name =>'JAVA_EXE');
end if;
dbms_scheduler.create_job
(   job_name          =>'JAVA_EXE'
    , job_action        =>p_cmd
    , job_type          =>'executable'
    , enabled           =>false
    , auto_drop         =>false
    , start_date        =>systimestamp
dbms_scheduler.run_job(job_name =>'JAVA_EXE');
end;test.bat is del test.csv
I run this
begin
RUN_OS_COMMAND('C:\temp\test.bat');
end;
/ anonymous block completed
It runs with no errors but does not run the bat file... what am i missing, thanks Doug

LLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\wblincoe\Application Data
CLASSPATH=.;[ORACLE_HOME]\jdbc\lib\ojdbc6.jar;c:\myjar\xdocore.jar;c:\myjar\i18nAPI_v3.jar;c:\myjar\xdoparser.jar;c:\myjar\xmlparserv2.jar
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=WBLINCOELT
ComSpec=C:\WINDOWS\system32\cmd.exe
DEFLOGDIR=C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\wblincoe
LDMS_LOCAL_DIR=C:\Program Files\LANDesk\LDClient\Data
LOGONSERVER=\\03N-DAYT-DC01
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=C:\OraHome_1\jre\1.4.2\bin\client;C:\OraHome_1\jre\1.4.2\bin;C:\app\wblincoe\product\11.1.0\db_1\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB=C:\oracle\product\10.2.0\http_1\sysman\admin\scripts;C:\oracle\product\10.2.0\http_1\perl\site\5.6.1\lib;C:\oracle\product\10.2.0\http_1\perl\site\5.6.1;C:\oracle\product\10.2.0\http_1\perl\5.6.1\lib\MSWin32-x86;C:\oracle\product\10.2.0\http_1\perl\lib\5.6.1;C:\oracle\product\10.2.0\http_1\perl\lib\5.6.1\MSWin32-x86;
PHPRC=C:\Program Files\PHP\
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f02
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\wblincoe\LOCALS~1\Temp
TMP=C:\DOCUME~1\wblincoe\LOCALS~1\Temp
USERDNSDOMAIN=CACI.COM
USERDOMAIN=CACI
USERNAME=wblincoe
USERPROFILE=C:\Documents and Settings\wblincoe
VSEDEFLOGDIR=C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection
windir=C:\WINDOWS

Help needed while exporting crystal reports to HTML file format using java

Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanks

the ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM

Mixed file formats in timeline not always playing nice.

Im using the latest version of premiere pro cc, and one of the great things about PP CC is that you can drop any file format in the timeline without trancoding it right? BUT! sometimes it doesn't play well when you add effects or titles, or adjustment layers. Lets say I have a 1080 DSLR timeline and I have a mix of H.264,ProRes and MP4 footage. When the footage is in the timeline with no effects, the playback is fine, but when I add a transition, a title or a adjustment layer over the footage, when it plays over that section, the footage sometimes stutters, or plays choppy. The footage will pause for a few frames an then continues, BUT only does this when effects are applied. Its behaves as if there is not enough frames to accommodate the transition or effect, which is not the case. But if I delete the clip and drop it into the timeline again in the same spot or I adjust the length of the transition the clip will play with no issues. Why is this happening? And yes ALL footage is rendered and I have powerful enough system to handle the work. Such simple effects should not affect timeline playback.

Hey Jim, with all do respect the symtoms may suggest that, as you stated but I know I have a powerful enough system. Im running a 8 core mac pro, 22gig ram,SSD drives and Radeon 5770 card. I have edited RED footage and Canon C500 footage with dynamic linked After effects on my system with no issues. So im certian its not my system.

IMovie 09 has trouble importing large video files from my JVC HD-40. I am trying to edit files such as these in 09. What should I do? Would buying iMovie 2011 help? I am shooting AVCHD files instead of the other mpeg2 file format.

Hi,
I am new into the Apple Community. I have a camcorder known as the JVC GZ-HD40 US and I currently am trying to use iMovie 2009 to edit my movies. With my camcorder, I have the choice to use two different video formats: AVCHD or Mpeg2. All my videos are shot in the AVCHD (HD) file format. This camcorder also has a 120 G Hard Drive built into it. When I plug in the camcorder through USB to my MacPro, the Hard Drive of the camcorder shows up as a icon on the desktop. Many of my video clips are at least thirty minutes in length, inside the camcorder. When I try to import in iMovie my video files, it only imports around ten minutes of the video and skips to the end of the clip. I would greatly prefer to use my MacPro desktop to edit movies instead of my Windows 7 computer which seems to work fine. Is there a solution to this problem? Would the new iMovie 2011 application solve this problem? I also have the Final Cut Express to work with, and also, can't get it to work. What should I try doing?

Hi all,
I have the exact same problem. I've just been to Thailand with my girlfriend, and we recorded a lot of stuff with my brand new Sony HD camcorder. And whenever the we ran out of camcorder memory we just emptied everything onto my HP laptop using the supplied Sony software, which produced m2ts files. When we got home, I realized that my Mac Pro/iMovie09 was not able to import this format. What a huge disappointment! Especially considering the fact that I just bought my mac back in March (my first mac ever) only for video editing and music composing (no problems with music composing, however!).
Well, I needed a solution, so last week I just bought the Voltaic HD converting software (35$), and it works great. No problems. Only thing is that my Mac Pro (quad intel core) had to work 24 hours a day for four straight days/nights in order to finish the converting job - resulting in 434 GB worth of mov-files. This is no problem as such, and the quality is great. BUT it seems rather stupid that this converting has to take place. If I use Sony Vegas on my PC, it works out of the box with my original m2ts-files. And I would really appreciate if Apple would implement a simple import function of m2ts-files in their software - one that would (if necessary) automatically convert the files to mov. Or even better: would work natively with the m2ts-files.
Best,

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document "Tina-19.jpg" could not be opened. Photoshop cannot open files in the "Adobe Photoshop JPEG file" format. What does this mean? I have opened my phot

I am suddenly unable to open my pictures in Adobe Photoshop. It gives the following message: The document “Tina-19.jpg” could not be opened. Photoshop cannot open files in the “Adobe Photoshop JPEG file” format.
What does this mean? I have opened my photos in Adobe Photoshop for years and suddenly I get this message and can't open any of my pictures

JoeLib wrote:
You type way faster than me Gene.
Well, not necessarily in this case.
According to the time stamp, Gene posted his answer a bit over three hours before you did, Joe.
Gene's post: Dec 29, 2014 5:54 PM
Joe's post: Dec 29, 2014 8:57 PM

The file should be in XML-BURSTING-FILE format.

I'm gettting an error when I try to upload my xml bursting control file for my oracle report that has an rtf template defined.
The error message says"The uploaded file MT_RAXINV.xml is invalid. The file should be in XML-BURSTING-FILE format."
and my code is as below:
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" >
<xapi:globalData location="stream">
</xapi:globalData >
<xapi:request select="/ZRAXINV/LIST_G_ORDER_BY/G_ORDER_BY/LIST_G_INVOICE/G_INVOICE">
<xapi:delivery>
<xapi:email server="mailhost.microtune.com" port="25" from="[email protected]"
reply-to ="[email protected]" >
<! - filter=".//G_INVOICE[BILL_TO_EMAIL IS NOT NULL]"- >
<xapi:message id="${TRX_NUMBER}" to="[email protected]" cc="[email protected]" attachment="true"
subject="Microtune Inc - Receivables Statement for payment due from ${BILL_CUST_NAME}">
Please find attached Receivables Statement for payment due of ${TOTAL_AMOUNT_DUE}.
Regards,
The Receivables Team
Microtune Inc
</xapi:message>
</xapi:email>
<xapi:print id="printer_tune"
printer="ipp:\\congo\sunset" filter=".//G_INVOICE[BILL_TO_EMAIL=NULL]" copies="1" />
<xapi:filesystem output="\\astro\erp\Oracle\${TRX_NUMBER}.pdf"/>
<! - Add an id for this delivery method i.e. printer1 - >
</xapi:delivery>
<xapi:document output-type="pdf" delivery="printer_tune,${TRX_NUMBER}">
<! - Deliver to printer and email - >
<xapi:template type="rtf" location="xdo://SQLAR.ARInvoice.en.US/"?getSource=true" filter="">
<! - Specify template to be used for Receivables Statements- >
</xapi:document>
</xapi:request>
</xapi:requestset>
Any help would be much appreciated.
Thanks,
Leo

Thanks, for the update. Sorry I did not update this entry, I had actually figured that out but still my problem is that my email is sending without an attachment. I'm not getting any error and the email is sending fine but without the attachment.
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/ZRAXINV/LIST_G_ORDER_BY/G_ORDER_BY/LIST_G_INVOICE/G_INVOICE">
<xapi:delivery>
<xapi:email server="mailhost.microtune.com" port="25" from="[email protected]" reply-to ="[email protected]">
<xapi:message id="${TRX_NUMBER}" to="[email protected]" cc="[email protected]" attachment="true"
subject="Microtune Inc - Receivables Statement for payment due from ${BILL_CUST_NAME}">
Please find attached Receivables Statement for payment due of ${TOTAL_AMOUNT_DUE}.
Regards,
The Receivables Team
Microtune Inc.
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="Invoice_${TRX_NUMBER}" output-type="pdf" delivery="${TRX_NUMBER}">
<xapi:template type="rtf" location="xdo://SQLAR.ZRAXINV.en.US/?getSource=true"></xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>

BAT file format

Similar Messages

Maybe you are looking for