Batch active at client level

Hi All,
Batch status is active at client level.
However, in the inbound delivery I am able to receive an existing batch for some other material.
Ideally, I should get an error that the batch already exists etc because the batch is active at the client level.
Please help.
Regards,
Ankur

Hi,
Thanks for your inputs. Batch is active at client level.
The check happens when we do the GR. At the time of GR, the system checks for existing batches and gives the error.
Is there a way to put this check at the inbound delivery level itself ? Requirement is to give an error if there is an existing batch for other material during inbound delivery creation itself.
Thanks !
Ankur

Similar Messages

  • FIN_PCA is activated at Client level or at Company Code level?

    I have two companies already set without FIN_PCA activated. I need to configure a new one and I want FIN_PCA to be active, Could I do this without impacting the other companies?

    It is at client level.

  • Client level, plant level and material level batch

    Hi,
    Can any body tell me wat is the actual meaning of
    !) Client level batch,
    2) plant level batch,
    3) material level batch
    with exa. please.
    Thanks
    Nilesh Ithape

    Hi,
    Below is the extract from the IMG Documentstion..
    ====================================================================
    Batch numbers can be unique at the following levels:
    at plant level
    at material level
    at client level for a material
    If you choose plant level, the batch number is unique in conjunction with the respective material and the plant. If you choose material level, the batch number is unique together with the material. At client level, the batch number is unique in the whole client.
    To change the batch level, you have to start a conversion program. This program first checks whether conversion is possible and outputs an error log containing all batch numbers that occur more than once at the new level. Now you need to manually transfer these batch records to batch numbers within Inventory Management using a transfer posting 'material to material'.
    If you change the level from plant level to a higher level, it is possible that batches with the same batch numbers in different plants are actually identical.  In this case, all you have to do is remove stocks (including previous period stocks) so that all batches with the same batch numbers, except one, can be reorganized.
    When you convert from plant level to material level, the material is then to be handled in batches in all plants in which it is defined.
    =========================================================
    Hope this helps..
    Regards,
    Siva

  • Block internal batch number at plant level

    Dear Experts,
    I have activated the internal batch number assignments at client level. But for some plants or one of the company code, I want to block the internal batch number creation during the goods receipt at production order confirmation(CO11N). Is it possible ? How? Can we restrict for some of the plants/comany code and allow for other plants/company code?

    Check this link:
    http://help.sap.com/saphelp_46c/helpdata/en/25/2838bf4f7811d18a150000e816ae6e/content.htm
    FF

  • Batch Activation & step by step procedure.

    Hi PP Gurus,
    Can any one will tell me the Batch Activation & Step wise procedure for it.
    I am dealing  with process industry
    Madan

    You have to activate Batch management in Plants,
    Activate the Batch Management level, Client level, Material Level, Plant Level.
    Specify Batch Number Range
    and follow the following steps in SPRO
    Specify Batch Level and Activate Status Management
    Batch Master
    Batch Number Assignment
    Creation of New Batches
    Batch Valuation
    Batch Status Management
    Batch Determination and Batch Check
    Batch Where-Used List
    Shelf Life Expiration Date (SLED)
    Create a Class (Batch 022/023) and Characterisitic for all the which you want to measure, in your case colour, maintain colour as characteristics.
    For all batches enter the characteristic Colour value as defined and maintained for different vendors.
    You have to activate Batch management in Plants,
    Activate the Batch Management level, Client level, Material Level, Plant Level.
    Specify Batch Number Range
    and follow the following steps in SPRO
    It is used to have the characterisitics of the batch like Solubility, thickness, any other such.
    It is used to back track easily, which material which batch has consumed in a specific batch.
    It is easy to recall a specific batch when a problem is noticed in a batch.
    It is used to segregate materials basing on Shelf life expiry date.
    These are some of the cases.
    Hope this helps you.

  • Batch activation at FERT

    Dear pp gurus,
    I need to actibate  batch at finished products level.. At the time of creation of production order , batch is know
    In the material master MRP2 view,  i have activaed batch managment
    Please tell me  what batch level i should maintain?
    Please tell me stEP by step procedure of doinconfiguration  this.along  with t codes config 
    Best Regards

    SPRO ACTIVITY:
    OMCT: Batch Definition
    OMCE: Batch Level
    OMCS: Activate Batch Status Management
    OMCU: Batch Status Management in Plant
    OMAB: Definition Initial Status Batch
    OMCZ: Activate batch number allocation
    CORW: Prod. Scheduling Profiles/Batches
    MASTER DATA:
    CT04: Create Characteristics
    CL02: Create Class
    MM01: Create Material with Classification View with class 23 (Batch)
    TRANSACTION DATA:
    CO01: Create Production Order
    MB31: GR, here the batch values have to be given.
    BATCH SEARCH STRATEGY
    SPRO ACTIVITY:
    OPLB: CondTab: Create 30 and u define the access seq CO01 & Strategy Type CO01
    OPLG: Batch determ.: Procedure for prod. co01, chem, co02
    OPL8: Order type Assign Search Procedure to Production Order and Activate Chek
    CU70: Create Sort Sequence
    MASTER DATA:
    COB1: Create batch search strategy - prod.
    TRANSACTION DATA:
    CO01: Create production Order and go componenet Overview(F6) and do the batch search strategy.
    REPORT:
    BMBC
    Regards
    Vinod

  • Batch Management at Site level

    Hi All,
    We are planning to implement Batch Management for certain product ranges in our Organization. We prefer to activate Batches at site level. I mean at certain sites Batch need to exist and at others they need not.
    I have checked the configurations but they all pertain to the configuration of Batch setting at Plant, Material and Client level in terms of Batch ID being unique or not.
    Is there any configuration possible so at to facilitate this requirement ?
    Thanks in advance.
    Regards
    Govind

    Dear Jurgen,
    You are right.
    I checked MMRV and the current status is as shown below.
    Current period            06 2011
    Previous period           05 2011
    Last period in prev.year  12 2010
    No I check in MBEWH and for the plant 2010 and article 381180 we have the folowwing entries.
    YEAR          CURR PERIOD      STOCK QTY
    2009            12                        68.000
    2010            12                        68.000
    2011            04                        68.000
    I try to do MB1A with movement type 551 for plant 2010 and article 381180 for the posting period 31.05.2011 with 68 Ea.
    Batch chosen was 7000000001 as this was the batch shown while I tried to archive:
    " MCHB: 000000000000381180 2010 0002 7000000001 unrestricted-use stock exists for previous period"
    While I try to execute the transaction it gives me an error...
    "Deficit of BA Unrestr. prev. 68 EA : 381180 2010 0002 7000000001"
    Do you have any clue why is this error coming ?
    I have done a stock replenishment to the batch 7000000001 in storage location 0002 for site 2010 on article 381180
    Regards
    Govind
    Edited by: Nivin Joseph Varkey on Jun 6, 2011 9:43 AM

  • Batch class at plant level

    Hi Guys,
    Is it possible to assign batch class for a material at plant level, the scenario is the material is produced in two plants the batch characteristics for the both plants are different , and hence i want to assign two different batch class to a material .
    Thanks and regards
    Thamizhchelvan G

    Thamizhchelvan,
    You cannot have Plant wise Batch Class as this is client level data.
    What can be done is assign all the possible characteristics to the Batch Class and assign that class to Material master and you can define the Inspection plan with MIC which are as required by individual Plants, based on this Results would be recorded and Inspection Results can be transferred to Batch Classification for that particular data.
    Regards,
    Prasobh

  • Client Level & Company Code Level Settings.

    Hi
    Which are the Settings in SD are At Client Level & At Company Code Level.???
    I know that Batch management & Serial number profile is at Client Level.
    Regards,
    Amol

    Hi
    SD strat with Sales Organization assign to company code, next is Distribution channel and Divisions, combination these 3 called as sales area. next is sales offcie and sales groups.
    Client and company codes top most level in SAP and Company code defined in FI.
    Batch mangement activate at Plant level and warehouse level, settings need to done on Material master and plant level not at company code level, but plant assigned to company code.
    Same as Serial number profiles related to Plant and Material master, again here plant is link to company code and material created under plant.
    So, no where direct link to Company codes.
    hopes it helps
    thanks
    Satish

  • How to upload the batch stock to bin level

    Dear gurus
    My client are going to implement WM  i want to know how to upload existing batch stock to bin  level.
    regards
    sam
    Edited by: Csaba Szommer on May 25, 2011 12:10 PM

    Hi,
    You can use LSMW for Tcode LT01 to upload inital stock in WH.
    So here u can enter all relevant data required like material, qty, batch, plant, Sloc etc..
    Hope this helps you...
    Rgds,
    Kris.

  • Documentary Batches with Batch Management at Material Level

    Hi,
    We have configured batch managment at the material level, and turned on for our materials. This applies to all plants that a material is extended to. Problem is that some plants don't have capability to (or do not need to) trace individual batches. So a "Generic" batch number approach is usually used in those few plants - but this of course still requires that the "Generic" batch number be supplied in all transactions. Some of those plants have just a more limited requirement of batch traceability (e.g. just at receipt or despatch, but not anything else like physical inventory).
    The functions of Documentary Batches seem most appealing. However, according to documentation, and in our tests, it seems that the batch management setting will always suppress the documentary batch functions in a plant, even if we only want generic batches.
    Does anyone know how to allow documentary batches for certain plants to override the "Batch at Material level" setting? P.S. We are not able anymore to re-configure the batch to material-plant level.
    FYI - I have searched Forums, Wiki, Support portal, SAP Help and Release Documentation.
    Cheers,
    Jeff

    hello Gurus,
    Can any body Download OSS note 41715  for me from Marketplace as i dont have access so please.
    regards,
    ninad

  • How to install Active Directory Client on Windows 8.1 Pro

    Hello,
    I like to install the Active Directory client on Widows 8.1 Pro.  I have tried installing RSAT (Remote Server Admin Tools for Windows 8.1, but when I run the setup program it says the Windows Update Standalone
    Installer, the update is not applicable to your computer.  I am running this Windows8.1-KB2693643-x86.msu and downloaded it from here.
    http://www.microsoft.com/en-us/download/details.aspx?id=39296
    So, how do I
    get this installed?
    Thanks
    Paul

    Hi,
    Remote Server Administration Tools for Windows 8.1 is available in the following languages: cs-CZ, de-DE, en-US, es-ES, fr-FR, hu-HU, it-IT, ja-JP, ko-KR, nl-NL, pl-PL, pt-BR, pt-PT, ru-RU, sv-SE, tr-TR, zh-CN, zh-HK, and zh-TW. If the system UI language
    of your Windows 8.1 operating system does not match any of the available RSAT languages, you must first install a Windows 8.1 Language Pack for a language that is supported by RSAT, and then try installing Remote Server Administration Tools for Windows 8.1
    again.
    Please check your system version (64 bit or 32 bit), and download the property one:
    How to determine whether a computer is running a 32-bit version or 64-bit version of the Windows operating system
    http://support.microsoft.com/kb/827218
    Kate Li
    TechNet Community Support

  • Bank details missing at Client Level

    Hi,
    We have created Vendor in R/3 system with Address and other detail including Bank details also.
    But At the time of record checking at client level .
    We are not getting the record releated to the Bank details .
    Can any body in the forum put some light on this issue.
    Thanks in Advance.
    Regards
    Rohit

    Rohit,
    I think that is the difference, Bank being a qualified table. In MDM you need to do load the tables individually. You need to extract the bank details from the R/3 separately and load in to the qualified table.
    Then when you load the Vendor Master table and the Bank code you are assigning to the Venodr if it exists in the qualified table, you should be able to see it there.
    Check out my blog
    /people/ravikumar.allampallam/blog/2005/09/06/mdm-import-manager--get-data-for-check-tables
    Hope this helps.
    Regards,
    Ravi
    Note : Please reward points if this solves your issue.

  • Batch determination at material level.

    Hello SAPians,
    I have a question about the batch management at material level.
    i have maintained batch determination policy at material level in system conversions also get done... now my problem is here ,i want to reassing it to plant level.. please help me in this becoz system is not supporting me as it showing the error that this implementation is not yet done in system...
    even i tick the batch determination in MM03 purchase view it is not allowing me ... and one more i did this in development server but it is assigned to all means dev, qlity as well to production servers...
    which field i forgot to maintain please clarify me..
    Waiting for the response.
    Regards,
    Ninad Kshirsagar

    hello Gurus,
    Can any body Download OSS note 41715  for me from Marketplace as i dont have access so please.
    regards,
    ninad

  • Batch numbers does not appear as batch split in DO level

    Hi All,
    I have currently configure batch determination as SO level. The batch number appears in SO alright but when my stock is insufficient for one batch, it doesn't take from another batch. My DO will only show one line item and doesn't allow me to do manual batch split. It is supposed to show all the available stock from other batches that it can take from.
    Kindly advise as soon as possible.
    Thank you!

    Reply by fpn:
    babowa answer was correct as follows:
    1. iWork (including Pages) once loaded by DVD DOES update via the Apple menu/Software Update function.
    2. Aperture 3.0 updates via S/U.
    BUT IT FIRST REQUIRED: a "fresh" key to register on my new iMac desktop. (from Aperture-Help phone-line).
    Question is now answered!
    fpn

Maybe you are looking for

  • Problem with installing and running some applications or drivers

    When installing and installing some items, towards the end of the installation I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext *was installed improperly and cannot be used. Please try reinstalling it or contact product's ve

  • USB6356 daqmx read.vi takes too much memory

    I am using USB 6356 for data acquisition, when I took data, the DAQmx read.vi took more and more PC memory. Until certain point, show "there is no enough memory to complete".  I set 2Ms/channel and 1M Hz rate, I know it is very big. But it takes daat

  • OnClientRowSelection for tableView's

    Hi, I'm working on a portal application which utalises epcf eventing to allow an iView to send messages another iView. Basically a table is displayed in the left iView and, depending which row the user selects, a message containing data from the sele

  • My old PC died before I could deauthorize it

    My laptop died before I could deauthorize it an allow me to sync to the new PC. Now I have all my apps and music, etc. on the iPad but it won't let me sync onto the new laptop because I'm "still sharing" with the old (now dead) laptop. Is there a way

  • Imported PowerPoint Slide doesn't look right

    I read Captivate 3.0 help and learned it can't handle PowerPoint 2007 files, so I saved my PowerPoint slideshow to 1997-2003 compatibility mode. One of the slides has tables with headings, and Captivate 3.0 does strange things when I import it--like