Batch and Quantity display during goods issue to Production order

Hi
Most of our raw materials used in production order are batch managed.While issuing goods to production order(TC MIGO).
While issuing goods ,when we issue we can see batch number only in the F4 help.At times the displayed batches may have ZERO stock.To prevent the wrong batch entry ,the end user is forced to open another screen in MMBE or MB52.
Is there any way ,where in both Batch and the quantity is also displayed in F4 help.
Thanks in Advance.
Surya

Hi All
my client have same problem. is it possible guide me how can prevent from to show Batch that has not Qty. when we do goods issue?
Regards
R.Tr

Similar Messages

Automatic Batch Determination during Goods issue of Production Order

Hi,
Iam trying to set up automatic batch determination during Goods Issue against a production order. My requirement is system should automatically run the batch determination similar to the case in production order.
I have set up all the required configs for batch determination. But to get the batch I need to click on the batch determination button. What I need is without clicking on anything. How can I do this. Whats the config needed
Thanks and Regards
Enrico

Dear Enrico
It is required lot of set up both in production order parameters and Batch Managemnet .I am providing you a summery of it .
Configuration Required for your above issue are as follows :
1.Activated Batch Management in the Material Master-MRP2 view and Work Scheduling view of the FG
2.check material master MM02, tab MRP2 and set field "Batch Entry" to value 3 here
4.You maintain a Search Procedure in OPL8 - Order Type Dependent parameters .Before that you should have Batch serach strategy :The sequence of steps are as follows -
Create Condition Tables
Create Access Sequences
Create Strategy Types
Batch Search procedure definition
Batch Search procedure allocation and check activation
Define Selection classes
Define sort rules
Maintain Batch Allocation Strategy Number Ranges
All the above are available in the Path - SPRO --->Logistics-General ---> Batch Management ---> Batch Determination and Batch Check
5.Maintain the setting in T.code OPKP (production scheduling profile). Select automatic batch creation on order creation.
6.If u want to execute the batch determination for components in the component overview of production order , then u have to create batch search strategy at COB1
7.If u want to execute during order confirmation u have to create batch search strategy at MBC1.
Refer the below link for your farther reference :
http://help.sap.com/saphelp_47x200/helpdata/en/25/28428b4f7811d18a150000e816ae6e/frameset.htm
Hope this will be useful
Regards
JH
Edited by: Jiaul Haque on Jun 22, 2010 11:28 PM

Automatic Batch determination at time of Goods receipt for production order

Hi SAP experts,
Greetings to you all. I wish to ask a query that how batch is determined automatically at the time of goods receipt for production order .
I have done the following settings:
1.Specified batch level at material level
2.External batch number assignment
3.Defined production order condition table '501' (plant/material)
4.Defined production order access sequence (order type-plant -material)
5.Defined Production Order Strategy type.
6.Defined Batch search procedure in Production Order.
7.Assigned Batch search procedure to Production order type for a particular plant , batch check not activated.
Please let me know of any more settings to be checked for the same.
For example, a production order is being confirmed for a quatity of 5 nos . at a time . However, the GI movement (261 movement type) for the production order components is taking place for 1 EA qty. from 5 different batches.
So now, how the system will define the GR (movement type 101) for the production order header material for the qty. 5 nos. EA ?
It is desired that the system should do GR for the qty. 1 EA of the header material for the 5 different batches (batches which were automatically deteremined for the Goods issue of the components).
Thanks in advance. good day.
Best regards,
RB

HI Rahul,
As explained earlier, for e.g., if the GR is taking place for the production order for qty. 5 nos. , and in that , if the component qty. is 1 EA for 1EA of header material ; then , the GR for the header material should take place for the same different batches from which the order components were issued for the order and not for the other batches in stock for the header material as well as components.
I am not sure if i understand your requirement 100%.
But let me explain you standard behaviour.
When Confirmation for production order happens and GR is posted during confirmation , All the GR happens agaist same batch number which i sassigned in production order assignment screen.
So for all the order qty single batch would be fixed. Say batch A1 is created for Header material for 100 qty.
Now during components issue to production order, If 100 qty needs to be issued for compoenent B it is possible to use multiple batches of componenets ( using splilt batch functionality /or manual batch number entry agaist componenet in goods movement screen) but header batch remains the same.
Check and Revert,
Santosh Sarda

Error while doing Good Issue for Production Order using BAPI

Hi All,
I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
*Action in Transaction (GM_CODE)
*GM Code for Goods Issue for Production Order is 03
gs_gmcode-gm_code = '03'.
*Header Data
*Posting date
gs_header-pstng_date = sy-datum.
*Document date
gs_header-doc_date   = sy-datum.
*Item Data
*Material
gs_item-material = zptp_s_rf_migo_261-matnr1.
*Movement Type
gs_item-move_type = '261'.
*Movement Indicator
gs_item-mvt_ind   = 'F'.
*Stock Type
gs_item-stck_type = 'F'.
*Plant
gs_item-plant     = gv_plant.
*Storage Location
gs_item-stge_loc = gv_str_loc.
*Quantity
gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
*Unit
gs_item-entry_uom = gv_uom.
*ISO code for unit of measurement
gs_item-entry_uom_iso = gv_uom.
*Order Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = zptp_s_rf_migo_261-aufnr
    IMPORTING
      output = gs_item-orderid.
*Reservation Number
gs_item-reserv_no = gv_resv_num.
*Reservation Item
gs_item-res_item = gv_resv_itm.
*Reservation Type
gs_item-res_type = gv_resv_type.
APPEND gs_item TO gt_item.
Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header       = gs_header
      goodsmvt_code         = gs_gmcode
    IMPORTING
      goodsmvt_headret      = gs_headret
    TABLES
      goodsmvt_item         = gt_item
      goodsmvt_serialnumber = gt_serial
      return                = gt_return.
Thanks in Advance.

hi,
did you look at message ?
System says, there are differences between the interface data and the order data. It can be anything. I think you should check
data in the interface .
this is the long explanation of your message :
Diagnosis
When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
The system checks this for the material and the order item.
System response
Due to this difference, the system cannot post the goods receipt.
Procedure
Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Feb 6, 2012 11:24 AM

Excess goods issue against Production order

HI PP Gurus,
My requirement is to block excess goods issue of raw material against a production order.
Ex. Production order qty = 10 , For producing 10 Finish goods i require 10 raw material. When i do confirmation via CO11N the system automatically shows GR & GI Values in Goods Movement tab. there i change GI value of RM from 10 to 20 the system takes the value and does the GR & GI.
My requirement is that the system should not do GR & GI if the GI value is more than that is calculated at the time of creation of Prod. Order.
Thanks in Advance,
Deven

Hi,
Rstriction of excess goods issue against production order is not possible in standard setting.
For achiving this you have to go for User exit.
The logic should be
In MIGO check mvt. type 261
Pass the order through table RESB and select all the components with quantity.
Capture the header material of order and use this as input along with the order creation date, plant and BOM application to explode function module CS_BOM_EXPLOSION.
THis will give you the BOM components which were valid at the time of order creation.
Now compare these BOM components with the components from RESB with quantity.
Here conditions will come in picture
If quantity is exactly matching then GI will be possible
or if you want to keep tolerance limit say for 10% then accordingly you can map the condition.
Regards
Amit Parkhi

How to restrict reversal of Goods issue against production order.

Dear All,
How to restrict reversal of Goods issue against production order if production order status is CNF or DLV.
i want that user can not reverse the goods issued against production order, if they want to do so, then user has to reverse the GRN and reverse the GI then only.
Please suggest the solution.
Regards,
Sandeep Dhruve

Hy Sandeep,
You have to use User Exit for this.
The following enhancement is available for production orders:
o   CCOWB001    User exit for modifying menu entries
You can use this function module to deactivate menu entries or
functions. The locked functions can then no longer be executed by the
user.
The enhancement CCOWB001 contains the following components:
Function exit
o   EXIT_SAPLCOWB_001   Good movement: Deaktivate functions
      Display documentation
Regards,
Dhaval
Edited by: Dhaval Choksi on Aug 22, 2008 3:01 PM

Goods Issue on Production Order

Dear PP Gurus,
The requirement is,
while doing Goods issue for Production order of X material, during operation Confirmation ' CO11 & CO12' , System should allow only BOM components of X and restrict or give warning message for goods movement of other materials.
I tried to use available User Exit for PP Orders but none of them gives desired output.
Can nybody guide me.
Thnx in advance.

In customizing materials management -
> Inventory Management and Physical Inventory->Goods Issue / Transfer Postings make--> Set Up Dynamic Availability Check
For 261 movement type set Dynamic Availability Check as "F"
and then in omcq transaction M7 362 message set "E"
This customizings prevent good ıssue more than reservation quantity

Good issue to Production order - Allows it in back posting date

Dear all,
Good issue to Production order ( 261 Movement ), allows us to post the component in back dated eventhough stock is not avaible on that date.
Example - Component stock on date 10.02.2010 = Zero , I made it Good receipt on date 18.02.2010 and now stock is available on date 18.02.2010.
Now GI to Production it allows the qty on current and back Posting date also , I want control on date with error message. It should not allowed the GI for back date from 18.02.2010.
Because of this our MB5B report shows the negetive issue qty if i post in back date.
Waiting for reply
Thanks and Regards,
Saurabh

Hi SAurabh,
PLease check whether Negative Stock is allowed for the valuation Area (plant).
GOTO >> SPRO >> MM>> Invetnroy management and physical inventory >> Goods issue/ Transfer Posting >> Allow Negative stock.
Untick the Negative stock allowed for your valuation area (PLant)
Regards,
Pravin

How to stop excess goods issue against production order from MB1A

Hi Gurus,
In our organization goods issue against production order is done by using MB1A T.Code manually.Due to this reason sometimes excess quantity of RM issue against production order.Now I want to stop the excess goods issue against production order by using MB1A but I want to mainatain a certain tolerence.
Please advice what to do?
Regards
Nirmal

Hi ,
Use user exit MBCF0002
This is called when u do goods movement for production order.
Regards,
Vishal

Goods Issue in Production order

Hi all
I am using a Production order scenario where some of the components are Goods issued. The steps that I am following is:
1/ Release the order
2/ Do a GI of the components using MIGO. I put the actual qty and the batch consumed
When I go back to the Production order using CO02/CO03 and go to the 'component' tab it does not show me the batch which I Goods Issued from the MIGO screen. It shows me the quantity but not the batch.
Is there a way I can make the batch appear in the Production order. The business process does not allow me to assign the batch in the Production order.
thanks

Hi,
If you want the batch to be visible in the component overview, the batch has to be entered in the component overview screen before the goods issue.
In this case when you do goods issue using MIGO with reference to production order, then system would propose the batches from the order automatically in MIGO.
Populating the batch automatically in the component overview screen can be achieved by customizing batch search strategy for the production order. If your process is acceptable to populate batch before goods issue, then the Batch search strategy can be configured to determine the batches automatically during order release.
Please let me know whether the above propsal solves your purpose. If its fine, then I would send you the procedure to configure the batch search strategy.
Otherwise the only way to see the component batch is thru Order info system via transaction COOIS or CO28->Documented goods movement or via CO02, by navigating thru the menu Goto->Documented goods movement.
Regards,
Jayakandan

During Goods Receipt of Production Order

Dear Friends
Myself Prasanna R, This is regarding <b>Error while doing goods receipt of Production order</b>, I have done MRP run, and converted planned order to production order, and based on the Production order, i have done Goods Receipt, durning GR(Goods Receipt) this error occurs: Check table TFBEFU_CR: entry 10   does not exist
Message no. M7001; In table TFBEFU_CR the entry 10   is missing.
i am working on 5.0 version, kindly help me out, so that i can proceed.
Thanks in Advance.
Regards
Prasanna R

Hi Ranganth
I can get into the MIGO, but unable to post the GR.
Kindly help me out. and error message as follows:
Check table TFBEFU_CR: entry 10   does not exist
Message no. M7001
Diagnosis
In table TFBEFU_CR the entry 10   is missing.
Procedure
Make sure your entries are correct.
If table has not been maintained correctly, please inform your systems administrator.
Thanks & Regards
Prasanna R

Error during Goods Receipt for Production Order

Hi All,
When using MIGO to post Goods Receipt for a Production Order, I got a customize message saying that the posting is only available between 2010.08.25 to 2010.08.27. I have checked in Business Add-in using SE19 but there are no implementation present. I know that in Logistic Verification MIRO there is a transaction OMRM to set messages. I would like to ask is there anything similar for MIGO.
Or is there any other place in Configuration which allows me to add these Customize message.
Thanks.
Edited by: jamison2004 jordan2004 on Jul 9, 2010 9:09 AM

Hello Jiaul,
Sorry I may have mislead you. The actual error message is "Goods Receipt for Production Order XXXX can only be made on 2010.08.25 to 2010.08.27". These two dates are the Start Date and FInish Date for the Production Order in CO03,
The Basic Start Date for the current Production Order is 2010.08.25
The Basic Finish Date for the current Production Order is 2010.08.27
I think what it means is that you can only Post Goods Receipt for the Production Order only after the Basic Start Date of the Production Order. Do you know where I can find the configuration for this message?
Thanks

Restrict Goods Issue once Production Order is Technically Comleted.

Hi,
Once Final Goods Receipt is post & Order is completed n it is Technically Completed it should not allow Any goods movement against that order but this is not happening & one can issue goods even if the order is TECO.
Can anybody comment on that n give solution to avoid further Goods issue once the order is TECO.
<b></b>

Hi All,
The t-code BS22 seems to be controlling the System Status for all modules. If we restrict the movement of goods for TECO (from PP perspective), does that impact TECO status from other modules as well such as CS or SD?
Regards,
Charles

Batch determination not working during goods issue in MIGO screen

Hi,
We have configured search strategy according to shelf life expiration while doing the goods issue with movement type 201, 351 etc. Now when I do goods issue in MB1A for movement type 201 or in MB1B for movement type 351, by entering the * and clicking enter, system proposes the batch nos of the material according to the shelf life expiration. But when I do same procedure in MIGO screen, while entering * in batch field system does not propose the batch nos., instead it gives error as "use of special characters are not allowed"
How the above problem can be resolved?
Thanks in advance,
Satish

Thanks Aroop & Jurgen
I have done the settings as per your suggestions by maintaining the Stock Determination Group. However It picks the batches as per FIFO and not as per shelf life expiration. Also same is the case with MB1A or MB1B.
The reason I wish to use MIGO instead of MB1A or MB1B is as follows
Suppose STO is made of say 10 line items (all Batch managed items). Now while issuing the goods, say for the seventh item there is no stock available then I can not bypass this item (it asks for enter the batch no. even though I change the quantity to zero) and I have to abort the complete transaction. But in case of MIGO I can bypass this item by unchecking the item OK check box.
Any inputs on the above will be helpful.
Thanks,
Satish

Goods issue in production order using BAPI_PRODORDCONF_CREATE_TT

Hi All,
This is regarding goods issue in a production order.We are trying to do this using BAPI_PRODORDCONF_CREATE_TT.
We have a finished good say FK_PROD_ORD_CONV(with BOM -FKTESTOUT2).we need to do a Goods Issue for this which implies that at reporting point 0001,we need to issue x quantities of BOM FKTESTOUT2 from a particular plant and storage location, and of a particular batch. Therefore, we need to pass the following:
Production order number
Plant
Material (BOM) = FKTESTOUT2
Movement indicator (which is u2018Fu2019 for goods movement) = u2018Fu2019.
Movement type = 261(for Goods Issue)
Storage location of BOM
Batch
Operation (Routing point) = 0001
Entry quantity
Entry Unit of measure = PC.
In addition, we need to maintain entries in Link_conf_goodsmov-INDEX_CONFIRM and link_conf_goodsmov-INDEX_GOODSMOV. The value for both would be u20181u2019.
In the Test program, although I am passing all these values, Goods Issue is not happening. I am not getting any error.The message just says that the production order has been confirmed but when i check for goods Issue,no corresponding data is there.
After this i am calling fm to commit the work as well.
Please let me know if I have missed something.

Good day!
Do you see you confirmation with CO14 transaction?
What on movements tab?
Look at postprocess transaction COGI CO1P.
Check LINK_CONF_GOODSMOV TABLE with 1,1 record.

Batch and Quantity display during goods issue to Production order

Similar Messages

Maybe you are looking for