Batch capture P2 only getting every other clip

I recently had to reload a project that was shot on P2. Still had the footage on an external hard drive so I figured no problem. Plugged in the hard drive. Mounted it in Log and transfer. Selected all the clips I needed and hit Batch Capture.
It only recaptured every other clip. So I selected the clips left and tried again. Still every other. Continued this way until I got them all, but with over 200 clips it was a real pain. Has anybody else had tis problem, know what I did wrong or how to make FCP get all the clips next time.
Thanks
Joel
FCP 7.0.2
OSX 10.5.8
Mac Pro 2x2.8 ghz Quad-core intel Xeon
8GB ram

Never seen this behaviour before. Trash prefs and try again.
-shane

Similar Messages

Log & Transfer Captures Every Other Clip

Mac OS 10.6.7
FCP 6.0.6
Trying to Log & Transfer AVCHD footage from a SDXC card. When I batch "Add the Selection to Queue", the status bar goes through the process as if it was capturing all the clips. However, only every other clip shows up in the FCP bin and on the Media Drive.
Would appreciate any help as in the middle of production and need to off load some video so I can reformat for more shooting.
I shot the footage on a Panasonic AG-AF100 (5). Log and Transfer worked beautifully the first several imports. Just noticed this yesterday for the first time.
thanks,

Did you ever reprt this as a possible bug?
You should use the "Feedback" page : http://www.apple.com/feedback/finalcutpro.html
or better still, the Radar Bug reporting page (preferebale because it affords you some degree of feedback from Apple on the status of the bug investigaion, but you'll need to create free developer account to use the system) : https://bugreport.apple.com/

Why is How I Met Your Mother Season 3 "Episode Only" when every other season has the option to buy the entire season?

Why is How I Met Your Mother Season 3 "Episode Only" when every other season has the option to buy the entire season?
Seems rather unfair to pay nearly £40 for each individual episode when each other season has the option to buy the entire season for £9.99 (including seasons after season 3)

Just recieved this from iTunes Store Support:
Missy here. I am a Senior Advisor from the iTunes Store. Your request has been escalated to me by Irish.
I understand you have some concerns regarding the numbering of the episodes for "How I Met Your Mother, Season 3". I can certainly appreciate your concerns and I'm happy to offer some additional information about this.
Episode 17, is a music video that accompanies the episode "Sandcastles In the Sand" however it is not available on the UK iTunes Store. This is why 17 has been omitted.
Apple is constantly expanding the iTunes Store's catalog of music, audiobooks, videos, and movies. To ensure that your request is considered, please submit it through the Request page at:
http://www.apple.com/feedback/itunes.html
This solves the issue. I have filed a request to get the music video added to the iTunes which hopefully it does, completing Season 3 of How I Met Your Mother.

Verizon iPhone 5, 64GB black - is anyone having issues with a very choppy conversation while talking on the phone. Both my wife and I have the same phones and are both having the same issue. We can only hear every other word.

Verizon iPhone 5, 64GB black - is anyone having issues with a very choppy conversation while talking on the phone? Both my wife and I have the same phones and are both having the same issue. We can only hear every other word of the person we are talking to. This happens at home, on the road and in the downtown area while calling both cellphones and landlines. It is intermittent, so we don't know exactly when it will reoccur. Absolutely no problem with data. The data speed is great.

"Wireless devices use radio transmissions, so unfortunately you can't get Service if your device isn't in range of a transmission signal. And please be aware that even within your Coverage Area, many things can affect the availability and quality of your Service, including network capacity, your device, terrain, buildings, foliage and weather."
Customer Agreement | Verizon Wireless
While there may be an issue in your area, it is suggested that you don't use wireless service if it's a life or death situation, such as the one you've described.

My keyboard is only registering every other stroke when i edit

I'm a writer and I just got Macbook Pro. (2.4ghz core 2 duo)
I really like the machine, but it really just isn't working for writing.
When I go to edit any of my text I've already written, it only recognizes every other keystroke from the arrow keys or the delete key.
It's driving me nuts. Editing is a big part of writing and I currently have to hit twice as many keystrokes to navigate text than I would otherwise have to.
It's intermittent though, sometimes after a restart it works fine for a while.
Happens same with the onboard keyboard as with the apple usb keyboard.
It never happens in the web browser or editing in a window like this submission form, but when it starts it's in text edit and subetha edit.
I wonder if this might have something to do with X11, which I run a lot of the time?
Any suggestions would be helpful. I need to be able to edit consistently.

Hi Dray!
Welcome to the Canon Forums and thank you for your post!
So that the Community can help you better, we will need to know about any error messages you're seeing either on the printer or your computer, the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x), as well as the way you connect to your device (USB or networked via WiFi or Ethernet).
It's also helpful to know if you're having this problem all the time, or only with certain programs or applications.
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team.
Thanks and have a great day!

Submit to an iframe, only happens every other time

We have a navigation (tree widget) that is generated with JavaScript. Clicking on the tree nodes is supposed to load an url i the content iframe.
A hidden form is used for this. By clicking on a tree node a hidden inputs field value is set and the hidden form is submitted that does a post to the iframe (using target on the form).
First question would be if this is the best solution for this. Feels a bit hacky.
But the main problem is that the form is only submitted every other time.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
>In Firefox 4 Safe mode also disables plugins (Tools > Add-ons > Plugins) and hardware acceleration (Tools > Options > Advanced > General)

Batch Capture - Frame rate changes after first clip

Hey everybody,
Working in CS4 on a Mac, and trying to simply batch capture about 35 clips after all have been logged accurately.
I'm using the DVX100A, and shot in 24Pa. So I have set up my sequence settings to DV 23.98 Fps, and 16:9 Progressive.
Upon batch capturing (making sure the capture settings are the same) the first clip is captured at 23.98 and works fine, then every one after that 'captures' at 29.97. I say 'captures' because it says it is captured but when I try and play it in the source monitor Premiere crashes or freezes.
Has anyone else experienced this issue? Thanks for any input regarding this issue.

Then I changed Recording Setup to 480i/30p...My thoughts were that this would be slowed down a little.
That is an incorrect thought. DV tape runs at 29.97fps always. Even 24p...that runs at 29.97 but has the film like cadence. If you want to shoot slow motion, you need to shoot 720p. That is a 60 frame format. You can shoot 720p24 to get 23.98, then there is a trick to get the camera to shoot 60fps and record it as 24fps. The Barry Green book that comes with the camera explains that. And that is SMOOTH slow motion.
Now the camera ships with a 16GB P2 card. One comes in the box, along with the Barry Green book. Did you not get that? Where did you buy the camera?
Shane

Batch Capture Problems - only some of batch being captured each time

I'm editing on a MacBook Pro with final cut version 5.1.4., with an operating system of OSX 10.4.10, off of an DVX100B in NTSC mode (at 30P settings) and when I try to Batch Capture, it won't capture all the clips. It acts as if it's capturing all of them, and at the end it tells me it has, but when i press "ok", there are only about a third of them that were actually captured, and I have to start again, and go through the batch about 4-5 times to get them all captured.
HELP!
Thanks

Superstitious, indeed.
As noted, we can't tell much from where we're sitting. Welcome to the forum, too.
Beginners' issues with batch capturing are often traced to not completely understanding how logging works. Maybe you have designated several overlapping clips.
bogiesan

Batch Capture vs Record Now and sub clips

Can FCP do scene detection on capture?
If not can I capture an entire tape, go back and create sub clips then use the media manager to delete what I don't want.

I just completed logging and batch capturing a 1hr DV tape and the interaction between my camera and FCP is not terribly responsive. The picture quality while scrubbing wasn't very good either.
So I thought it would probably be quicker, easier on the camera [and my eyes] if I captured first then logged, or created sub clips and then delete what I didn't want - otherwise I might end up with too much data.
In PPro I just started capturing and it automatically made a new clip for every scene then all you had to do was re-name them. Very fast. You could also use sub clips but it didn't work very well so I'm a bit suspicious about doing it that way.

Batch Capture Sequence Only

Hey,
I've been searching and cannot find any good info or a good process to batch capture only the media used in a sequence.
I just had an old client contact me and want to do some simple updating of an older video project- changing text graphics and replacing a few shots.
The project was longer- almost 15 minutes and was created/culled from a very large amount of source footage. All of that footage has long since gone offline.
I've tried multiple times and processes to batch capture the the media used only in the sequence, but cannot seem to figure out a way to convince FCP to capture only the footage used. It continues to try and capture ALL the source media in the entire project.
I know that on my old Avid system, all I had to do was select the sequence and click batch capture and it would do it with no problem (even grabbing handles on the new footage). It's frustrating that to do so on FCP is so difficult.
Is there anyone out there who has found a solution or developed a process by which they can batch capture only the media in a sequence. If so, please share it with me.
Thanks,
Mike

FCP can do the same as Avid's consolidation with the media manager, however when it's done, the original media has to still be online. (not your situation). I have gotten into the habit of creating a sequence that only references the media used in it, before I trash the original media because of this.
I'd suggest an XML or EDL export of the sequence, reimport that and batch it. This new sequence will only reference the media used in it, and you can add handles to it during the batch capture. If you use an EDL, you could take your titles and graphics and edit them from the original offline sequence to the new.
Jerry

HtmlText anchors respond only on every other click.

Hi,
I'm using Flex 3.5 and I have a Text object with an anchor set in the htmlText property. The link only works on every other click. Is this a known problem in Flex?
Thanks!

I've done a simple case and I've found out that I get this problem when the htmlText is inside a TabNavigator object. If it's outside it works as expected.
This is what is going on...
http://ardeeser.com/dev/clients/test/
I think it's a focus issue. You have to click once on the link for the tab to gain focus. Is there a good work around for this?

How do I delete a clip without every other clip in my timeline moving over?

So i've been editing for hours, and somehow, the first 30 seconds of my movie were screwed up. So now i'm trying to re-edit the first 30 seconds. When i try to delete a clip, the rest of the clips following the deleted one, move over to this empty space. I do not want this to happen!!!!! I want the other clips to stay in the same place!!!! How do I delete a clip without having all the clips after it move over to the deleted space????
Please help.
Thank you.

Hello, richardzulu!
Welcome to the discussions.
In answer to your question, the clips behind the one you delete must move over to close the gap between the clips, an empty space left by the clip that you deleted. Otherwise, you would have a black/blank part in your movie.
You CAN purposely create a black clip if you wish, but probably you just want the movie to continue as you have created it, leaving out the deleted clip. If your movie is just video, it should work out to be the same once the deleted clip is gone.
However, if you have added some other audio, and not locked it to its corresponding video clip, the timing of the audio to the video will be off. Use the "Advanced" tool to select 'Lock audio clip at playhead' to avoid this. Once the audio is locked to a specific video clip, edits to other clips can be done without separating the audio and video. Occasionally, they still do get misaligned, so you do have to keep checking.
If you really want to keep all the other clips the same without doing anything else, switch to Timeline view, and move the trailing movie over from the clip you want to delete, making sure that the length you move is the same as the clip to be deleted. Then, delete the clip. iMovie will create a black clip in that space and the rest of your clips will remain untouched. However, as I said, the movie will be interupted by this black clip.

Issues when printing a website of multiple pages, only prints every other page

I have recently started using Firefox as since using windows 8 have found a few problems with explorer.
I sell a great deal on ebay and in order to print my invoices, ebay create a webpage with all of them on.
I have attempted to print this through firfox and it only seemed to print every other page fully(1,3,5,7 etc.)
Pages 2,4,6 etc. would have just the first couple of text lines on but nothing else, it even shows it like this on the print preview. can you help?

Try the '''''reset''''' described here: <br />
http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

How to read a text file and only output every other line?

I am just writing a program that reads a file but outputs only every other line. Any ideas...please? thanks

I'd start with something like this and expand on it as you go:
File file = <whatever>;
BufferedReader in = null;
try {
    in = new BufferedReader(new FileReader(file));
    int i = -1;
    for (String line = null; (line = in.readLine()) != null; ) {
        if ((++i % 2) == 0) {
            System.out.println(line);
} catch (IOException e) {
    e.printStackTrace();
} finally {
    if (in != null) {
        try {
            in.close();
        } catch (IOException e) {
}Shaun

I CAN ONLY PRINTS EVERY OTHER PAGE - PLEASE HELP ME!

Please can anyone help me? I am trying to print from my iMac (running Lion) to my HP1022nw laser printer. In every application, only every other page prints out. Within Paper Handling on the print window, I have correctly selected print every page.
Can anyone help me? PLEASE!
Many thanks and kind regards

I am surprised you can send mail, but not receive.
If you want ot send mail, you will have to configure the MTA to allow relaying for your internal IP address range. Edit the INTERNAL_IP section of the mappings file, change the 32 after the ipaddrees of your system to somthing like 24 or 16 (depending on your network!)
If you can send & receive messages in webmail, then there must be something wrong with your outlook settings for reading. Are you trying to read mail using POP or IMAP? What are your settings for POP system, user & password, etc?
Also, creating a user in the console is fully supported. No problem, just don't forget to tick the "mail" service and do the mail settings for the account.
Hope this helps you further.
Regards,
Niels

Batch capture P2 only getting every other clip

Similar Messages

Maybe you are looking for