BATCH CAPTURE TAPELESS workflow still FCP is looking for a capture device when going ONLINE

Hi,
I am working on a documentary and about to go online with my edit.
I used Sony FS100. Tapeless. I did Log and Transfer to ProRes 422 in FCP 7.
Later when I run out of space I used Media Manager to RECOMPRESS everything to ProRes Proxi. Worked well.
But now when I try to batch capture to ProRes 422 FCP is looking for a capture device thinking I am working with tapes.
How do I make FCP undrerstand I am tapeless? Does the recompress kill the possibility of bach capturing back to online full quality 422?
Thanks for the support!
Gabor

I have read through some more forums and I only found one mention of the Media Manager 'Recomress' function.
It said:
"Transcoding with MM (recompress). It preserves timecode/reel name, file names, etc... Except the clip ID, which is used along with reel name and timecode to batch capture from source files (at least for P2)."
Clip ID is the metadata relyable for the work of batch capture. It seems without it it is impossible to batch capture.
I wonder why they designed Recompress like that, if it is true?

Similar Messages

Tapeless workflow with FCP 5 and Canon XL H1

Is it possible to establish a tapeless workflow with FCP 5 and a Canon XL H1 shooting in HD mode?
We have to shoot many days of lectures and want to skip the import of the footage. The firestore FS-C can only record up to 7.5 hours in HD but we don't have the time to empty it overnight so it can be available the next day...
We can connect a couple of 500 GB lacie to a 17" Macbook Pro and wanted to use FCP to live capture from the camera. Is that possible?
Or did anyone try to do that with the Canon Console software (windows only) and then import its stream in FCP?
Thanks

No time to unload a drive when you have all night? Why would that be? Isn't this just a big drag and drop? Can't let it start and go to dinner?
If you shoot HDV you should also record it to tape becuase disk drives can fail etc during the shoot.
You can capture live from the camera's FW port but again I'd shoot tape as well... use capture now but also use the device control that works with that camera to get the TC thru too. (probably FW HDV basic)
The camera also has an uncompressed output but that would take a capture card and fast disk array (faster than FW for sure) to capture the uncompressed HD.
Jerry

I'm looking for a capture device that is compatible with Adobe Flash Media Live Encoder. I bought elgato but it is not compatible. Anyone know?

I'm looking for a capture device that is compatible with Adobe Flash Media Live Encoder. I bought elgato but it is not compatible. Anyone know?

This is just a shot in the dark....
Do you have all your devices hooked up (and on) when you launch FMLE? For example -- your camera or digitizer? When FMLE launches it will try to launch with the last known settings... including input devices. If it can't find these devices (they're not hooked up and on) it can crash, although in most situations it will simply show a default screen with default settings.
If you do have your equipment hooked up (and on) when you launch FMLE, try unplugging them and then launching FMLE so that it opens up in default configuration mode (no input devices selected; all default settings). Then uncheck the "preview" boxes for both your input and output preview windows. Close FMLE and then plug in your equipment (and turn it on) and relaunch FMLE. I offer this suggestion as FMLE can sometimes act funny when the preview windows are open with certain types of input devices. Don't worry -- you don't have to keep the preview windows off forever. If you can get FMLE to successfully launch with the preview windows off, then you can set your settings however you like and save the profile. Then quit and relaunch FMLE and then turn the preview windows back on and see if it works. If it does, great. Just be aware that making any settings changes while the preview windows are open could result in FMLE crashing. Again -- this only happens with some capture devices, such as certain Dazzle capture boxes.
If none of this works, you could always try to upgrade to FMLE 3.2 and see if that solves your problem.

Looking for video capture devices

when I tried to compile a web cam capture program, I have the following Exception:
Looking for video capture devices
No VFW video detected: JMFSecurityManager: java.lang.UnsatisfiedLinkError: no jmvfw in java.library.path
Please,I need ahelp.

Hi I can recommend v4l4j to capture for video streams with linux. I need a library of functions to quick show video from webcam in JFrames and it did it for me.
try it : http://v4l4j.googlecode.com

One question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to

one question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to change that setting?
TY

The History menu can only show that fixed maximum of 15 as that is hard coded.
Maybe this extension helps:
*History Submenus Ⅱ: https://addons.mozilla.org/firefox/addon/history-submenus-2/

Looking for a bluetooth device

I'm looking for a bluetooth device that will operate in a similar way to the headphones that come with the iPhone. I guess what it is is a stereo bluetooth headset that plays music but switches over to the phone when a call comes in. Most of what I've seen has either been one or the other, not both. I recently saw something called the JayBird that operates with all the iPods but I'm not sure if it would work with the iPhone. Can someone please point me in the right direction?

Okay so do we know if any Bluetooth stereo headset works at all with an adapter? If so, does anyone have a product that they can recommend? Also, the function to switch between music and a call automatically is important.

Looking for "manage my devices" on my account screen. It is not there. Trying to delete old device from account.

Looking for "Manage My Devices" on "My Account" screen. It is not there. Trying to delete old device from account.

It should be under Store > View My Account > iTunes In The Cloud > Manage Devices. That screen can't be used to deauthorise computers, only change the automatic download status.
tt2

HT1620 Where do I look for the security key when I download an item. Your website says your key is 0xD0261077

Where do I look for the security key when I download an item. Your website says your key is 0xD0261077?

Your question is somewhat terse, and I might infer you're conflating the PGP key used for Apple security-related email communications with cryptographic hashes (message digests) used to verify the integrity and the origin of files, and with digitally-signed binaries. While these areas are somewhat related, details vary. (If you're already familiar with this stuff, my apologies.)
The Apple PGP key is used to sign (verify) messages from the security folks at Apple, and can be to encrypt messages sent to the Apple security folks. See this Apple Security PGP web page for details on using the PGP key for message verification and for message encryption.
File downloads are implemented differently, and will generally involve a particular cryptographic hash or message digest (and not necessarily a PGP key), and what might be used used varies by the particular website and the download involved, with some sites using the older and insecure MD5, and with others increasingly using some variation of the less-insecure SHA cryptographic hash. Depending on the scheme used, these can protect against corruptions, or can also be used to sign the binaries. The system that Apple is encouraging developers to use is called Developer ID.
Shell commands used and useful here include md5 and various openssl commands for the sha hashes/digests.
If you have a particular public web site or file download, post a pointer and I'll have a look.

I purchased an Iphone 5 and I'm looking for a car charger, when will they be on the market?

I purchased an Iphone 5 and I'm looking for a car charger, when will they be on the market?

AppleIsMyHobby wrote:
I would just advise that you be careful with old model chargers that were built for 30 pin to USB connectors for the old iPhones. They may not work for the iPhone 5 and/or they might damage the phone/battery etc. The best plan would be to wait for some kind of charger that was made for the iPhone 5.
Nonsense; USB outputs are an industry standard, there is no danger in using a USB to Lightning cord to charge your iPhone 5.

HT200166 I have a Canon XL2 that will not capture video properly in fcp 10, where it does capture properly in fcp6 and 7. How can I "fix" fcp 10 to do this correctly?

My Canon XL2 (1394/firewire 400) will not capture correctly in fcp10, but it did when I had fcp 7 on the same computer. Is there a software fix that will allow me to use the XL2 with this program?

I just want to get this clear.
With FCP 7 and earlier you could capture a whole tape in one continuous 60 minute long clip.
FCP X cannot do that. It is designed to split the tape into its individual clips, however long they may be.
Are you saying that when you try to capture clips of 10 seconds or so, it only captures the first 4 seconds?
All I can suggest is that you trash the preferences with this free app.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

RAZR HD, why does my phone look for a Wi-fi when I am going onto the internet?

My Droid 3 seemed to have a better connection to the internet and I never had to set up a Wi-Fi connection.
Any advice?

Ahauben4, that's a great question and I'm sure we can figure this out! Just to clarify, is your phone asking you to connect to to a WiFi network because one is available or is it saying no 3G/4G connection available? If you have WiFi turned on, it will always look for available connections. Please turn off WiFi in Settings, Wireless & Networks. If you're having problems connecting to internet over 3G/4G, what city and state are you located in?
MarquiaF_VZW
Follow us on Twitter @VZWSupport

Baseline template - look for specific loopback interface when specifying "ip tftp source-interface"

Hello all
I'm new to regex and I'm trying to make a baseline template, that will check our network devices for our required basic configuration.
What I'm trying to do is to make a template that will look for either a loopback0 or loopback1 interface.
If eíther one is found (the loopback interfaces will not be there at the same time) it must apply the following command:
ip tftp source-interface loopback0 (or loopback1)
Is it even possible to make an if-then statement using regex?
Thank you in advance.
Best regards
Jesper Ross Petersen
Message was edited by: Jesper Ross Petersen

Yes, this can be done
#Go to the tcl shell of the device.
C1811#tclsh
C1811(tcl)#
#copy and paste this at the tcl prompt.
proc intf {} {
set runningcfg [exec show run | inc ^interface Loopback]
foreach line [split $runningcfg \n] {
if {[regexp {interface (Loopback[0-1])} $line -> interface] } {
ios_config "ip tftp source-interface $interface"
return "ip tftp source-interface $interface"
# now type the name of the proc (intf) at the tcl prompt.
C1811(tcl)#intf
# If loopback0 or 1 is present the tftp source interface is added to the running config.
ip tftp source-interface Loopback0
C1811(tcl)#

Looking for External Sound Device for iBook G4

Does anyone know of an external audio device similar to Creative Technology's Sound Blaster Extigy that will work with my iBook G4? I would like to record CDs played through an external CD player that has audio compression. Unfortunately the iBook lacks audio inputs. Thanks.
Don Squires

Perhaps this is what you're looking for:
http://www.m-audio.com/products/en_us/SonicaTheater-main.html
I had an Extigy with my previous notebook (presario 1500) and absolutely loved the sound I got through my creative 5.1 speakers, at least when my computer was working properly
I see the sonic theatre as the mac equivalent, although it doesn't appear to have a remote, oh well. I have no idea how much of the software will work on a mac, but it can't be too hard to find some good audio software.

Looking for RCA capture device for streaming

My newspaper does some random video streaming of some events...however, we generally use a Windows PC Laptop (which is less powerful than the MacBook Pro I'm wanting to use, for several reasons such as convinience and well, the better performance).
We have a RCA capture device that takes video and audio in from a basic Canon video camera and then feed that into Livestream.
I know Blackmagic Design has a video capture device for Apple, but it's $149. Is there something cheaper out there for Macs? Our RCA capture device we use on Windows will not work on Mac.
It just takes the RCAs and we plug it into the USB port. A firewire port would be fine too.

I have read through some more forums and I only found one mention of the Media Manager 'Recomress' function.
It said:
"Transcoding with MM (recompress). It preserves timecode/reel name, file names, etc... Except the clip ID, which is used along with reel name and timecode to batch capture from source files (at least for P2)."
Clip ID is the metadata relyable for the work of batch capture. It seems without it it is impossible to batch capture.
I wonder why they designed Recompress like that, if it is true?

FCP crash - looking for stability and speed and some logging advice

This is our first time on Final Cut and we're learning as we go.
Is there a good source (posting or web page) where we could learn how to set up the machine to make it more stable and fast?
Also, we're doing our transfers for a doc that we're working on. Is there a good place that will walk us through how we should be setting up the machine as well as logical logging and capturing?
Thanks in advance.
GK

Not sure about free resources, but there are a couple DVDs out there that are good places to start:
http://www.rippletraining.com/gettingstarted_in_final_cutpro.html
http://www.lafcpug.org/store_tutorials.html#anchor12201575
Shane

BATCH CAPTURE TAPELESS workflow still FCP is looking for a capture device when going ONLINE

Similar Messages

Maybe you are looking for