Batch change images in automater not working

trying to batch change picturesfrom pict to jpg in automater but it won't work

It was the Ad Block Plus - I went into the OPTIONS for Ad Block Plus and clicked on the "Disable for this page only" button... then all seemed good. Odd however... when I looked at the "blockable items" list, the only one that showed up was a googlegamepad ad. I unblocked it with no change.
So it is blocking something that it is not listing... I'll follow-up with them and inform them of the problem.

Similar Messages

Batch change to description does not work

I have a IMac27" Intel i7 using IPhoto 09
I am trying to batch update the description on multiple photos.
I shift click on a series of photos then go to batch update> change description.
It appears to start with a message and blue line that says " updating photos ", but then after the initial blue line nothing advances and nothing happens to the photos

This will end my contributions to this topic. I have done my best to describe the symptoms I encountered, how I had created this problem, and a solution to it.
I have no special knowledge to how or where metadata is stored with a file, nor the permissions associated with the file and its storage in iPhoto. Unless someone can correct me, I had believed that capture date, camera, format, lens, EXIF, TIFF, CANON, or any other descriptor are part of the metadata and that Canon stored all of this information together with the image in a single file. It did not matter to me whether IPTC data was part of any image file that I imported into iPhoto or not. I am presuming there is metadata attached to image files that can be properly parsed to give what can be loosely described as capture date, time, EXIF, TIFF, CANON, IPTC or any other descriptor that might be present. Because I had used batch change to write data to RAW images in iPhoto in the past, I expected I would be able to do so again. I wasn't trying to trick iPhoto or any readers into confusion about how or where that data may be stored. I simply noted that I had some RAW files that iPhoto could not write to and some that it could.
I hope that I have given an adequate description of how I encountered this problem. If others should encounter a similar effect, they may try the solution I found (namely, export the original file and re-importing it).
If someone wishes to explain why the solutions suggested by Old Toad were incorrect for photos imported from another computer, be my guest.
Message was edited by: Peter Wepplo

Since I refreshed Firefox 36.0.4, "Save page as" and "save image as" are not working (even in Safe mode)

I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
In Safe Mode, same problem.
I serached past forum discussions and found several occurrences, but no convincing response.

''afew2 [[#question-1054433|said]]''
<blockquote>
I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
In Safe Mode, same problem.
I serached past forum discussions and found several occurrences, but no convincing response.
</blockquote>
I tried troubleshooting plugins, none appeared to be causing the problem.
I installed 36.0.1, but no difference. Went back to 36.0.4, still no change.
I ran a malware check with Malwarebytes, no change.
A past thread here suggested deleting localstore.rdf, which I tried, no result.
People have had this problem in the past. No one has any idea of how to fix it?

Image drag drop not working in scaffholding. Does it require soem setting?

image drag drop not working in scaffholding. Does it require soem setting?

Hello Manoj,
The scaffolding teamplate which you use to create scaffolding page is actually a design prototype which helps you to create similar types of pages instances very quickly without authoring each page separately (for example news, aticle types of pages) and that is the concept of scaffolding only.
For example - When you go to location http://localhost:4502/miscadmin#/etc/scaffolding/geometrixx you will see a "News" page which is an example of scaffolding (this is a similar page which you can create using scaffolding template).
Now if you open this page you will be accessing http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html and here you will see already design page.
     1. if you access page properties from side kick you will see how this page is configured using target template and target path
     2. if you go to design mode using side kick you will see how the component has been design (which is similar to what appears on page when you came first time)
     3. Now come back to normal view of that page (http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) and author this page with some dummy property and click on "create" button. I know here you can not author the image as it comes as disabled empty box.
     4. once you author the content and click on create button it will create an instance of scaffolding page on the same page you can see the link on the top of same page.
     5. Now access that page, when you access that page the page will take reference of target template you configured using pare preoperties to display the page.
     6. On this page you will see the same component you configured and when you will edit it you can author the image from there directly.
Now question is why to configure same component two times half data from scaffolding and half data from page but answer is the design is correct because the page design which you have created (for example http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) is just proto type to create actual page instances and prototype can not holds values for page instance (specially image until it doesnt configured correctly for page instance in this case) which exist only when you create pages using the scaffolding page prototype. Otherwise you have to do more customization by extending scaffolding "/libs/wcm/scaffolding" changing the code and design OR you have to design it according to your target page strtucture which you have configured in page properties (specially image node).
If you want to create your own page prototype using scaffolding template and want image to associate just copy paste "/etc/scaffolding/geometrixx/news/jcr:content/dialog/items/items/tab2" node to your newly created scaffolding page prototype.
for more information on scaffolding just refer -http://dev.day.com/docs/en/cq/current/wcm/scaffolding.html
I hope it clarifies your question and help you to proceed. Let me know if you need more information or help.
Thanks,
Pawan

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

My newly changed apple password is not working on my MacBook to help me change my password to log on?

I just need help changing my password on my MacBook to log in. But my log in password and newly changed apple password are not working. Can I reset it or change the password another way or get a list of past password to try if those might be what the Mac thinks is my password still?

You can reset it.
For Snow Leopard and previous.
http://support.apple.com/kb/ht1274
For Lion and later.
https://discussions.apple.com/docs/DOC-4101

How to save bloger password in firefox 3.6.6 ? common ways at internet such as changing nsLoginManager.js is not working because the notepad cant save the new file.

how to save bloger password in firefox 3.6.6 ?
common ways at internet such as changing nsLoginManager.js is not working because the notepad cant save the new file.
== URL of affected sites ==
http://blogger.com

Some sites like PayPal, Yahoo, Windows Live and bank sites use ''autocomplete="off"'' to prevent Firefox from saving the name and the password.
If a site uses ''autocomplete="off"'' then look at this article for a bookmarklet to remove that autocomplete attribute.
http://kb.mozillazine.org/User_name_and_password_not_remembered (bookmarklet)
http://kb.mozillazine.org/Password_Manager
See also http://en.wikipedia.org/wiki/Bookmarklet

HT201303 Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

Someone uses my apple ID to purchase, I have changed my password but not work . How can I disassociate my bank account with my APPLE ID?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Copy Settings to multiple images - STILL A NOT WORKING AFTER MANY VERSIONS!

I have reported the problem of pasting settings to multiple images for many versions and this simple bug is STILL present in LR4!
In develop module, make changes to an image, click Copy button, select settings to copy.
Now, select a range or a number of images to which you want to paste the settings, click Paste button. Guess what? Only the first image gets the settings!
This functionality should work and is even documented in the manual. There are other ways of copying settings but I can never remember how to do this.
Am I doing something wrong or is this a genuine bug that only seems to affect a few people (I did a web search for V3), or do people just not use this function?
Please developers, fix this bug if it really is a bug!

Thanks Dorin for the information.
I guess I am just frustrated that the program does not work the way it is documented. There are two very prominent buttons, Copy & Paste and they don't work as documented or as you would expect them to.
With sync you have to navigate menus to do what one click of the mouse should accomplish. All I want is some acknowledgement from Adobe that this is a bug and for it to be adressed. As a long-time IT person I know this would be VERY easy to fix. If it cannot be fixed then update the documentation.
Oh well, enough said. I still love LR!!!

Change of Status is not working in WebUI

Hello All,
Iam facing a problem in changing the status of the item in web UI requirement as follows.
We need to set the item status from the To be Closed to Close.The status To be closed is set by an contract processor and schedules the Action .i.e Close item Once the contract approver execuets the action.It need to be change to Closed and the item end date need to be set to the date when the Action is execueted
I have done my coding in the Execute method for the action Close item by using the FM CRM_ORDER_MAINTAIN
to change the item enddate and CRM_STATUS_CHANGE_EXTERN to change the Status to Closed and the Commit Work .My code is working fine in GUI but this is not working in WebUI . I can only see it when i execute the action go to the edit mode.
Can any one help me out in this regards.
Thanks in Advance.
Regards,
Kiran Posanapalli.
Edited by: posanapalli kiran on Feb 15, 2010 7:16 PM

Hi Kiran,
we're having the same issue that an opportunity is updated in the normal Gui but not in the WebUI when using FM CRM_ORDER_MAINTAIN.
What coding did you use for fixing this?
Kind regards,
Roy Willems

ADD FILES FOR UPLOAD - IMAGE PATHS DO NOT WORK IN WIDGETS

Hi There
I'm trying to add my own images to a widget I bought from Qooqee - the Wrapper_v2 image slider. But when I try to add my own images with the image path it doesn't work. I've tried adding the image with 'Add Files for Upload' - and then using the full path which I get from right clicking on it in the assets panel - but it still doesn't work.
Most of the widgets require you to either specify the image path, or an external URL. I do not want to use a third party image hosting site to get URL's for every image I want to use on the site - so I just need to know what I'm doing wrong with the Add files for Upload - why do my file paths not work in the widgets?

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???
Also, you need to ask for help from the widget maker

Resizing image using CSS - not working in IE

Hello,
I have a standard report with couple of columns one of which a image column. The images are of varying sizes and I manged to resize them to a fixed width & height by using CSS code in page header as below:
td[headers="ITEM_PICTURE"] img {
display: block;
width: 70px;
border: 1px solid #999;
padding: 4px;
background: #f6f6f6;
}The CSS does the trick in Chrome & Firefox but does not work in internet explorer. Is there a way to make this CSS code IE friendly?
Cheers for help.

William Wallace wrote:
I am using Apex 4.2.1 (had this issue in 4.1.1 as well) and using theme 10.Ah, the Sludge Sand theme. In 4.x that's a legacy theme only really included to allow applications to run on IE6. It's therefore intended to run in quirks mode, meaning in Internet Explorer terms there's no support for anything that didn't work in IE6 (for certain values of "work"). This means no CSS3, no support for a lot of useful CSS2.1 stuff (like attribute selectors), and probably problems with jQuery which requires standards mode. Adding a DOCTYPE to the page templates to trigger standards mode Interactive Report: how can I display carriage returns?. In 4.2 you really should switch to one of the latest Standard themes, or at least one of the standards mode Legacy themes (those not marked with a "*").
If you must use theme 10, and there are no other images in this report (like edit icons) then you could add a static ID to the region and use a more basic selector like:
#static-id td.t10data img {
display: block;
width: 70px;
border: 1px solid #999;
padding: 4px;
background: #f6f6f6;
}However, it appears that one of IE's quirkier quirks mode quirks is that CSS padding is not supported on images, so the presentation you want is not possible using theme 10 in IE and CSS alone.
Switching to a modern theme is recommended.
Edited by: fac586 on 02-Mar-2013 10:31

Spry Image Slideshow does not work in Explorer

My spry image slideshow works fine in Safari and Firefox, but does not work in Explorer.
A small box shows up in IE 8, and absolutely nothing shows up in IE 7.
www.epaaudio.com
Any Suggestions?

How did you get your slideshow to play in Internet Explorer? I'm using the same slideshow on my new website and it plays fine in everything but IE versions. Here's a test page I'm working on... http://4034.sandbox.i3dthemes.net/oceankayakbanzai.html
I looked at the code for your page and didn't notice anything different on mine. But yours works... Let me know if you have any suggestions. Thanks!

Auto-Submit On Change in DropDown List not working properly!

Hi all,
I�ve got a problem with a drop down list an a table with some rows on my page. The property "Auto-Submit on Change" is set for the drop down because the valueChange-method has to do some work when the user selects another value from the drop down.
The problem is that after selecting another item from the drop down, the table fields don�t keep their values, which I had entered before I selected another item in the drop down. But: When I select an item again, suddenly exactly these values are set.
Here my code:
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:ui="http://www.sun.com/web/ui">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
<f:view>
<ui:page binding="#{Page1.page1}" id="page1">
<ui:html binding="#{Page1.html1}" id="html1">
<ui:head binding="#{Page1.head1}" id="head1">
<ui:link binding="#{Page1.link1}" id="link1" url="/resources/stylesheet.css"/>
</ui:head>
<ui:body binding="#{Page1.body1}" id="body1" style="-rave-layout: grid">
<ui:form binding="#{Page1.form1}" id="form1">
<ui:table binding="#{Page1.table1}" id="table1" style="height: 488px; left: 24px; top: 120px; position: absolute; width: 1376px"
title="Table" width="1376">
<ui:tableRowGroup binding="#{Page1.tableRowGroup1}" id="tableRowGroup1" rows="10" sourceData="#{SessionBean1.columnProvider}" sourceVar="currentRow">
<ui:tableColumn binding="#{Page1.tableColumn1}" headerText="field1" id="tableColumn1" sort="field1">
<ui:textField binding="#{Page1.textField1}" id="textField1" text="#{currentRow.value['field1']}"/>
</ui:tableColumn>
<ui:tableColumn binding="#{Page1.tableColumn2}" headerText="field2" id="tableColumn2" sort="field2">
<ui:textField binding="#{Page1.textField2}" id="textField2" text="#{currentRow.value['field2']}"/>
</ui:tableColumn>
<ui:tableColumn binding="#{Page1.tableColumn3}" headerText="field3" id="tableColumn3" sort="field3">
<ui:textField binding="#{Page1.textField3}" id="textField3" text="#{currentRow.value['field3']}"/>
</ui:tableColumn>
<ui:tableColumn binding="#{Page1.tableColumn4}" headerText="field4" id="tableColumn4" sort="field4">
<ui:textField binding="#{Page1.textField4}" id="textField4" text="#{currentRow.value['field4']}"/>
</ui:tableColumn>
<ui:tableColumn binding="#{Page1.tableColumn5}" headerText="field5" id="tableColumn5" sort="field5">
<ui:textField binding="#{Page1.textField5}" id="textField5" text="#{currentRow.value['field5']}"/>
</ui:tableColumn>
<ui:tableColumn binding="#{Page1.tableColumn6}" headerText="field6" id="tableColumn6" sort="field6">
<ui:textField binding="#{Page1.textField6}" id="textField6" text="#{currentRow.value['field6']}"/>
</ui:tableColumn>
</ui:tableRowGroup>
</ui:table>
<ui:dropDown binding="#{Page1.dropDown1}" id="dropDown1" items="#{Page1.dropDown1DefaultOptions.options}"
onChange="common_timeoutSubmitForm(this.form, 'dropDown1');"
style="position: absolute; left: 48px; top: 24px; width: 240px; height: 24px" valueChangeListener="#{Page1.dropDown1_processValueChange}"/>
</ui:form>
</ui:body>
</ui:html>
</ui:page>
</f:view>
</jsp:root>
and the code of the valueChange-Method:
public void dropDown1_processValueChange(ValueChangeEvent event) {
getSessionBean1().getColumnProvider().commitChanges();
List positions = getSessionBean1().getColumnProvider().getColumnList();
Is there some explanation for this behavior or it�s really a bug in the way how the drop down is submitting the form? I would understand it when commitChanges is not working here because of auto submit on change (==immediate?). but once it works und once it doesn�t work!

Hi There,
Not sure what you mean. Have you tried Netbeans 6 yet. Do you see same behaviour in it as well?
This might be of help to you
http://www.netbeans.org/kb/55/dropdowncomp.html
Thanks
K

Holding SHIFT to resize image in PROPORTION not working - InDesign CC

Hello,
I am putting a portfolio together containing a ton of images.
I constantly use the SHIFT to resize images in proportion constantly, but it is not work. It resizes randomly wherever my curser goes.
It works in Photoshop CC and Illustrator CC
I have uninstalled InDesign (uninstalled preferences too), then re-installed with no result.
Using the Scale tool (by pressing S) still does not work
I have been using the manual SCALE with percentages or using the "fit content proportionally" buttons on the toolbar, which is killing my workflow, as I need fine grain control
I may have typed something out while thinking I was in a text box, when I was not. This may have turned on or turned off the feature. I'm not sure how to bring it back now.
Any help would be appreciated
Casey

Which tool are you using, and which platform?
I use the selection tool, myself, and for that you need to press BOTH Ctrl (PC)/Cmd (Mac) and Shift before dragging to scale proportionally. On windows you must press the keys before clicking the mouse.
How did you replace the preferences? Directions to do it properly are at Replace Your Preferences

Batch change images in automater not working

Similar Messages

Maybe you are looking for