Batch characteristic in classification not updating

Hello expert,
I have created classification for batch (class type 023) with characteristic MCH1 -LWEDT to record last GR date. Batch number has to be entered manually during GR posting. And i expect that during GR posting, characteristic value of GR date will be automatically updated in the classification but i've found that it is blank.
My query is, do GR date in characteristic value of batch class can be automatically updated during GR posting?
If it yes, what's wrong with my class? and how to make it works as expected?
Really appreciate your help.
Thank you in advance

Hi Rahul,
Just to make sure. Have you created a characteristic named MCH1-LWEDT or have you actually linked your characteristic to the field MCH1-LWEDT in the "Addtnl Data" tab in CT04?
BR
Raf
Edited by: Rafael Zaragatzky on Aug 5, 2011 1:03 PM

Similar Messages

Characteristic Values are not updated in COPA Report

Dear Gurus
I have created one characteristics and derive the value out of derivation rule but the same is not appearing in the COPA Report even though I mapped that Characteristics in my COPA Report. Please advice and help.
Sivakumar Subramanian

Dear Jayaram
While creating the Derivation Rules I checked the derivation is working fine or not by giving the inputs and it is working and no error in deriving the characteristcis.
Please help.
Sivakumar Subramanian

Batch Characteristic not updating with result for linked MIC

Hi,
I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
Can you help regards?

Ok. I am a little bit further.
I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
Hope that this can help to solve my problem.
Regards,
René
@ Mayank
Above, all the master data and customizing is mentioned to transfer the result to the batch classification
Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

Classification Data (SLED) not Updated for Movement Type 561

Dear All,
I have noticed that after uploading the opening stock with movement type 561, the Classification data (Date of manufacture & Shelf Life expiry date) which was captured in MB1C is not updated in the batch master in Classification Tab.
Is this standard SAP behaviour for 561 movement type? Or is there any config is missing?
Please advise.
Regards,
Suresh.

Hi Suresh,
For your question I understand that while uploading the initial balances, system didn't ask you for the Manufacturing date or total shelf life date. Following is the solution:
You have to maintain "Check SLExpir.date" and "Classif.batches" indicators for the movement type 561 or any movement type you required. This customization can be perform through SPRO>>MM>>IM>>Goods Mvt. and mvt. No.
Also activate SLED at plant level in customization.
Regards
SAK

Batch characteristic value not populated!

Hello guys,
please would appreciate advice to following:
I created two reference chars z_goods_receipt (MCH1-LWEDT) and z_created_on (MCH1-ERSDA). Chars assigned to material batch class. During GR in Classification Dates (chars values) are visible, but after GR is saved, in batch chars values are not populated.
Consequently, I can not use these chars in sorting criterium for delivery batch determination - batches are not sorted acocrding to dates.
Batches on material level. In Customizing (Classify batches within goods mvt), for mvt 101 setting is 4 (Classification always in foreground (all batches)) - but bug remains even if i try with other options. Check with developer shows not much help from EXIT_SAPMM07M_004 or EXIT_SAPMM07M_004 or EXIT_SAPLV01Z_012.
Any idea how to populate these chars in batch?
Alternatively, what else I could use in order to enable FIFO batch determination for batches in delivery?
Thanks for prompt replies!
Br, Jan

Hello,
SAP reply -standard behaviour. After save in MSC2n values read from MCH1, after that in MSC3N value read from AUSP.
Issue solved using non reference charactereristic and adding code into ZXMBCU04.
Br, Jan

Vendor is not updating in batch while doing STO

Hi All,
I created a PO with vendor 123456.Did a GR for it.
In GR i maintained a batch AA1 and received the material. Now the stock is in A plant with batch AA1 and vendor 123456.
Then i went in to batch AA1 and found that vendor(123456) was updated in batch master.
Next i created a STO for moving the stock from one plant to another. Stock transfer A plant to B plant.
In STO also i used the same batch AA1 and in outbounddelivery i used same batch AA1 and in GR i maintained the same batch AA1 but plant B.
Now i checked the batch AA1 for plant B.
Here the vendor is not updated in the batch AA1 for plant B combination.
What may be the reason.
If STO is done system cant able to pick the vendor?
KIndly help me in this regard.
Regards
KK

HI,
Thanks for the reply.
Yes you are exactly correct.
Is there anyother way that vendor can be updated in the batch?
Regards
KK
Edited by: Kishore Kumar Galla on Nov 10, 2009 2:17 AM

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

Inbound Delivery Idoc not update PIC and PGI with split batch.

Dear Experts,
Delivery outbound with split batch send to third party Warehouse to PIC and PGI from SAP, then receive the delivery inbound IDOC to update the PIC and PGI in SAP from third party. Basic Idoc DELIVERY03 it's works fine with out split batch, with split batch it's not updating PIC and PGI at the same time no error. Please advice on this
E1EDL24-HIPOS = "HIGHER LEVEL ITEM NUMEBR"
E1EDL24-HIEVW = "VALUE 1"
E1EDL19-QALF = "BAS"
Thanks and Regards,
Thiru.

Hi,
You also have to create a segment with following data as well (for batches).
E1EDL19-QUALF = "QUA".
Cheers,

Batch not updated in process order

hi all,
When i am doing batch determination and goods issue through coik pick list batch not update in process order. presently we are not doing batch determination in process order.after goods issue component batch fields are grey out in the process order

HY,
Batch field are filled only if you do Batch determiantion of components whether it is by auto or manual.And it is logical also becasue if you split the material qty. in more than one batches during goods issue( whether it is in COIK or in COR6N)then think what should be the case in Component screen in process order?
As soon as you complete the Goods Issue This field becomes gray but the filled of Quanity withdrawn is update with qty you have withdraw.
Regards
Dhaval

Do Not Update Display when running Batch Processes

This has been the case since the beginning of time so it would be great if this could be sorted.
I'm sure batch processes would be immeasurably faster if Audition didn't update the waveform display with every single process. When I'm batching hundreds of WAV files this makes things sllllooooowwwwww.
An option before running the batch to 'do not update waveform display' would be a godsend.

Bump

Transfer single results from results recording to batch characteristic

Hi all,
I've a question. Is it possible to transfer multiple single results from results recording to a batch? It should only be qualitative results. The problem is as follows.
We have a SAP - LIMS interface (QM-IDI). In SAP we have an inspection plan with two MICs:
Customers OK
Customers Not Ok
Both MICs are linked to a catalog with customer + specification number. For example:
0001 - Customer A v. 2015.01
0002 - Customer B v. 2014.08
0003 - Customer C v. 2015.02
0004 - Customer D v. 2015.01
LIMS determines which customer specifications passed and which failed. We'd like to get the following batch from LIMS:
Customers OK
0002 - Customer B v. 2014.08
0003 - Customer C v. 2015.02
0004 - Customer D v. 2015.01
Customers Not Ok:0001 - Customer A v. 2015.01
This is what we would like to see in the batch as well. Batch selection should be performed based on this information. Ik looked into multiple specifications, but I don't think this can help.
Thanks for your help.
regards,
Maarten

This is basically standard SAP functionality under Multiple specifications functionality. With that process you can specify what country a material is Ok for or not ok for.
Multiple Specifications in Inspection Planning - Quality Management (QM) - SAP Library
Otherwise, without this, there is no standard way to implement what you want.
However, since you are using an interface between your LIMS and SAP, you can have your system, based on values in the file transfered, take certain values from the file and directly update the batch characteristic values, (MSC2n) and record the countries it's ok for. It would simply be a mult-value characteristic. But the data for it comes from the transfer file, not QM. There would basically be nothing visible about this in the inspection lot.
Craig

Batch managment with classification

Hi,
I have material with batch and classification. Material master have base unit KG, but I need second unit PC or M and other parameters of material. (coefficient between KG and PC is not constant).
I give to classification attributes fields: quantity, length. width, ...
In goods receipt I input batch with classification (quantity, length. width, ...)
Where can I see batch balance with classification ?
Is possible recalculate attribute of classification quantity after goods issue or how I can manage balance of quantity?
thank
beto

Hi,
Once you fix the classification, i don't think you can recalculate the classification, what do you mean by batch balance?
Aktar

Linking MIC & Batch characteristic

Hey All
My understanding is that to move values from batch characteristic to MIC we need to maintain the link in MIC and this relationship is one to one relationship.
We have a business requirement as below. I do 2 types of testing i.e. official & vendor. First i do vendor testing and this will be reflected in the batch. After this i do official testing and this needs to overwrite the vendor results and update the batch automatically.
If i have to use the batch characteristic + MIC link, then i need to create 2 batch characteristics & 2 MIC's / test i perform on the material.
Is there a way by which i can have multiple link between batch characteristic & MIC and manage this link via some user exit or
do you have some suggestions on how to handle this business requirement?
Regards
TOM

You only need one inspection characteristic.
You don't indicate in your process how or when these two types of inspection happen.
You can create a source inspection lot with the tests the you use to record the vendor results on.
Then when you receive the material, you have an 01 inspection lot created for recording your actual results.
The second set UD on the 01 lot will over write the batch record results from the first source inspection.
If you have one inspection lot that is created at goods receipt, use two operations. Operation 10 has the vendor tests. Operation 20 has the in-house testing. When the UD is made the test results from the last operation will be written to the batch record.
Craig

Need to restrict values in F4 help for Batch Characteristic

Hi,
I need to restrict values in F4 Help for a batch characteristic based on values entered for another characteristic. I could not find any BADI or Exit for this purpose. There is a BADI CACL_VALUE which is triggered after an entry is selected from dropdown list but nothing when we press F4. I thought of using Object Dependency but I need to write a programming logic for the requirement. Please let me know if there is any way to write program in Object Dependency or any other way for this requirement.
Regards,
Nikhil

Hi nikhil simha,
first of all, find out which search help is called.
[Hierarchy of the Search Help Call|http://help.sap.com/saphelp_nw70/helpdata/en/0b/32e9b798da11d295b800a0c929b3c3/frameset.htm]
may help you.
If you know the search help, you may enhance it, but first of all you should check the where-used-list and make sure that the search help shows the requested behavior only in the context where you want it to.
If it is your own program, you may be better off to create your own search help and define the triggering fields as search help interface input fields. Then you can use the values to filter results.
Regards
Clemens

Populate Batch characteristic values in create sales order BAPI

Can anybody help me in populating the batch characteristic values using BAPI_SALESORDER_CREATEFROMDAT2?
I have checked the related notes provided by SAP, like, 567348 but it will be great if someone can send some code snippet on this.

Subramanian, Brad and Raja.
Thanks for your suggestions its were useful, with
these i can resolve my problem.
!!! Best Regards !!!
Raja
I used the se37 to test bapis, is more easy and fast !!
and you can save data like variant, and you can simulate the real execution without write any code abap,
and re-process the times that you need,
when you know what fields you need you write your abap code faster.
Thanks !!!
Message was edited by: Noemi Huerta

Batch characteristic in classification not updating

Similar Messages

Maybe you are looking for