Batch Characteristics value in report
I want to develop a custom report where material master batch characteristics value should be displayed.
The report will display based on Process order No. In Process order AFPO table I am bringing MATNR, CHARG, WERKS information.
Now, the MATNR is maintained with a batch classification of class type 001 (material class) one characteristic "Z_NUMERIC" and value is maintained as "22345".
Now, in custom report I have to bring the 22345 no. In which Table I can get the information for material for 001 class type characteristics value?
Please repond.
You can find it in table ausp
Regards,
Dhaval
Similar Messages
-
Copying Batch Characteristics Value from Standard SAP Table Field
Dear Experts,
1. While creating a user-defined Batch Characteristics 'CREATED_BY' using ct04, on the Additional Data tab, I filled the following fields as follows: Table Name = MCHA, Field Name =ERNAM.
'CREATED_BY' was then assigned to a batch Class TRIMMED (of class type 022).
TRIMMED was assigned to a batch managed material ADE245DD.
After posting co15 (confirmation of production order) for material ADE245DD, the value in table MCHA & field ERNAM is automatically copied into the Batch Characteristics value field of u2018CREATED_BYu2019 for the generated batch.
2. But I am unable to achieve the same result when I create another Batch Characteristic with similar settings in the Additional Data tab as follows: Table Name = MARC, Field Name = DISPO.
After doing co15, the value stored in table MARC and field DISPO does not get copied into the Batch Characteristics value.
Please what do I need to do in Scenario 2 above to achieve the same result as in Scenario1?
RegardsHi,
Table and field used in additional data table should be related to the object than only it will work, for e.g. MCHA and ERDAT will work if you create a characteristcis and assign it to class type Batch (022/023) because MCHA table has Batch no. as primary key,
this implies for using material specific table e.g. MARA , you should use characteristics with class type 001 (Material class) , try using with table MARC also
Cheers
Dheeraj -
Copy of Batch characteristics value from material master to Batch
Hi Gurus,
I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
Can any one help me to achieve this in standard way?
Thanks
SandipHi,
Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
Thanks
Kumar -
Modifying batch characteristics value
Dear Experts,
We have created batch characteristics named 'POTENCY','LOD','ASSAY'.
Now the value of POTENCY is calculated based on the formula, that is LOD * ASSAY. There are chances that the value is sometimes calculated more than 100%. Now I want to put a restriction that if the value increases more than 100 than the value of POTENCY should be automatically be 100.
What should I do to resolve this issue.
NOTE - POINTS WILL BE REWARDED.......Hello,
You can write a specific FM called by the configurator (procedure which call a user FM). Input are your LOD andd ASSAY, output is POTENCY. Inside you can write your formula.
Parameters are given by std tables.
This is sample :
FUNCTION zsca_calcul.
*" IMPORTING
*" VALUE(GLOBALS) TYPE CUOV_00
*" TABLES
*" MATCH STRUCTURE CUOV_01
*" QUERY STRUCTURE CUOV_01
*" EXCEPTIONS
*" FAIL
*" INTERNAL_ERROR
DATA : w_met_cmin_r LIKE cuov_01-atflv.
CLEAR : w_matnr_paracheve, w_instance .
BREAK-POINT.
lecture des données en entrée dans la table query
LOOP AT query WHERE atcio = 'I'. "input parameter
vérification type num
IF query-atfor NE 'CHAR'.
MESSAGE ID 'ZSCA_CONFIGURATEUR' TYPE 'W' NUMBER '000' RAISING fail
ENDIF.
CASE query-varnam.
WHEN 'MET_NUMART_MLAZ'. ' my single input characteristic
w_matnr_paracheve = query-atwrt.
PERFORM lire_mara. ' process the input parameter
PERFORM lire_carac.
WHEN OTHERS..
MESSAGE ID 'ZSCA_CONFIGURATEUR' TYPE 'W' NUMBER '000' RAISING fail.
ENDCASE.
ENDLOOP.
update of the output characteristic MET_CODEMAT (it is numeric and contains value 9
READ TABLE query WITH KEY varnam = 'MET_CODEMAT'.
match = query.
match-atfor = 'NUM'.
match-atflv = 9.
APPEND match.
ENDFUNCTION.
Regards. -
Populating Batch Characteristics values in MIGO
Dear All,
I have a requirement to populate MIGO Quantity in one of the Characteristic of the batch. If this is not possible then i need to check whethere that characteristic value and MIGO Quantity for Each item are same or not ....
I have got certain exit EXIT_SAPMM07M_004...But this exit is not getting called .. I have put break point and checked but not working.
Can you please help me out in this exit or if you have any other place where i can put my checks.
Regards
BhavinHello,
You can try with the following BADIs.
These may be helpful for your requirement.
MB_QUAN_CHECK_BADI
MB_CHECK_LINE_BADI
MB_STOR_LOC_BADI_GTS
DERIVATION
Regards
Arindam -
Same Batch Number with different characteristics value
Dear Gurus,
I have the following scenerio:
The finished goods should be maintain in batch with external number and at the time of confirming the finished goods in co11n the client want to capture the finished goods value like length, width and diameter.
So we propose the batch characteristics with class type of 022 for finished good and we maintain the character as length, width and diameter under the batch class 022 and assign the batch class in finished good classification view.
Now the requirement is we want to capture the batch characteristics value length width and diameter with same batch number for multiple confirmation.
Example:
Confirmation Batch number batch Class Length width Diameter
1 1000 022 100 50 20
2 1000 022 120 25 10
3 1000 022 150 70 30
Now at present we are trying to capture the batch characteristics with same batch number but our standard system will not allow to maintain the different batch characteristics value under same batch number. If we overrite the batch characteristics in msc2n transaction the last value maintained be copied to all batch number. but we want same batch number with different batch characteristics value.
Please share your idea and try to solve..
Regards,
VimalDear Vimal,
It is not possible to maintain multiple batch characteristics in one batch.
Work around is to create original batches and assign to your production order. During CO11N, generate one batch per confirmation. There is a report in batch information cockpit to link between original batch and batch per confirmation.
Rgrds, -
How to new add characteristics value c in report painter report.
I want add one how to new add characteristics value in report painter report of FKi5. How can I add ?
Dear,
First you need to add that Field to your using library.When you add that
field to your library ,you will automatically get that field into that
selection list.
Use T-code GR22 for change library and enter your library name and Table
name and then select which field you want to add
regards -
Material batch characteristics
Hi all,
I have a requirement to fetch the material batch characteristics with delivery number as input and print the characteristics for the corresponding batches. Can you please say me the logic to fetch the details ? It is an urgent requirement..
Thanks & Regards,
RamaKrishnan .THi
See the sample code for fetching the BAtch characteristics of Material
report z21311r_batch_char no standard page heading
line-size 132
line-count 58(1)
message-id mm.
Declaration for Tables
tables: mara, " Material Master
mard, " Storage Location Data for Material
t001w, " Plants/Branches
t001l, " Storage Locations
cabn, " Characteristics
inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
c_obtab like inob-obtab value 'MCH1', " Database Table
c_flag type c value 'X', " Flag
c_c23 type i value '23', " Ratio
Constants for Ratio Categories
c_13 type p decimals 2 value '13.00', " For Ratio 13
c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
c_15 type p decimals 2 value '15.00', " For Ratio 15
c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
c_17 type p decimals 2 value '17.00', " For Ratio 17
c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
c_19 type p decimals 2 value '19.00', " For Ratio 19
c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
c_21 type p decimals 2 value '21.00', " For Ratio 21
c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
c_23 type p decimals 2 value '23.00', " For Ratio 23
c_g23(4) type c value '>=23', " For Ratio >=23
c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
" Unit of Measure
c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
" Material Number
c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
" Material Des.
c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
" Stock Value
c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
" Char.Value (Ratio)
c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
g_clabs1(16) type c, " Quantity
g_clabs(18) type c, " Quantity
g_cursor(15) type c, " Cursor field name
g_matnr type mara-matnr, " Material Number
g_werks type mchb-werks, " Plant
g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
matnr like mchb-matnr, " Material Number
werks like mchb-werks, " Plant
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Unit of measure
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
atinn like ausp-atinn, " Char.Value
clabs like mchb-clabs, " Stock Value
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
werks like t001w-werks, " Plant
name1 like t001w-name1, " Name
end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
matnr like makt-matnr, " Material
maktx like makt-maktx, " Description
end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
objek like ausp-objek, " Object No
atinn like cabn-atinn, " Characteric value
atflv like ausp-atflv, " Characteristic Value
end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv like ausp-atflv, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv(32) type c, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output1.
Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
s_lgort for t001l-lgort, " Stor.Location
s_matnr for mara-matnr obligatory, " Material No
s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
select werks
into t001w-werks
from t001w
up to 1 rows
where werks in s_werks.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(002).
endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
select matnr
into mara-matnr
from mara
up to 1 rows
where matnr in s_matnr.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(003).
endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
select lgort
into t001l-lgort
from t001l
up to 1 rows
where lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Storage Location'(004).
endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
select atinn
into cabn-atinn
from cabn
up to 1 rows
where atinn in s_atinn.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Characteristic Value'(005).
endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
into (mard-matnr, mard-werks, mard-lgort)
from mard
up to 1 rows
where matnr in s_matnr and
werks in s_werks and
lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
exporting
repid = l_repid
heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
20 sy-vline, 21(40) 'Material Description'(011) centered,
61 sy-vline, 62(22) 'Ratio'(009) centered,
84 sy-vline, 85(18) 'Quantity'(010) centered,
103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
b~werks " Plant
b~lgort " Storage Location
b~charg " Batch Number
b~clabs " Stock Value
a~meins " Base Unit of Measure
into table i_mchb
from mara as a inner join mchb as b
on amatnr eq bmatnr
where b~matnr in s_matnr and
b~werks in s_werks and
b~lgort in s_lgort.
if sy-subrc <> 0.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
clear i_plant.
refresh i_plant.
select werks " Plant
name1 " Name
into table i_plant
from t001w
for all entries in i_mchb
where werks = i_mchb-werks.
Get the Material Description from MAKT Table
clear i_makt.
refresh i_makt.
select matnr " Material number
maktx " Material Description
into table i_makt
from makt
for all entries in i_mchb
where matnr = i_mchb-matnr and
spras = sy-langu.
sort i_plant by werks.
delete adjacent duplicates from i_plant comparing werks.
sort i_makt by matnr.
delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
l_tabix like sy-tabix.
if not i_mchb[] is initial.
loop at i_mchb.
l_tabix = sy-tabix.
clear l_matbatch.
concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
read table i_plant with key werks = i_mchb-werks binary search.
if sy-subrc = 0.
i_output-name1 = i_plant-name1.
endif.
Get the Material Description from i_makt Table
read table i_makt with key matnr = i_mchb-matnr binary search.
if sy-subrc = 0.
i_output-maktx = i_makt-maktx.
endif.
Get the Characteristic Values data from INOB and AUSP Tables
clear inob.
select single cuobj from inob
into inob-cuobj
where klart = c_klart and
obtab = c_obtab and
objek = l_matbatch.
if sy-subrc = 0.
select objek
atinn
atflv
from ausp
into table i_ausp
where objek = inob-cuobj and
atinn in s_atinn and
klart = c_klart.
sort i_ausp by objek atinn.
loop at i_ausp.
clear cabn.
select single atinn atnam from cabn
into (cabn-atinn,cabn-atnam)
where atinn = i_ausp-atinn.
if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
if cabn-atnam cs c_ratio.
if i_ausp-atflv between c_13 and c_1499.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_ausp-atflv between c_15 and c_1699.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_ausp-atflv between c_17 and c_1899.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_ausp-atflv between c_19 and c_2099.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_ausp-atflv between c_21 and c_2299.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_ausp-atflv >= c_23.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_23.
endif. " Condition for RATIO values
else. " If characteristic does contain RATIO
i_mchb-atflv = i_ausp-atflv.
endif.
i_output-atinn = cabn-atinn.
i_output-atnam = cabn-atnam.
i_output-atflv = i_ausp-atflv.
i_mchb1-matnr = i_mchb-matnr.
i_mchb1-werks = i_mchb-werks.
i_mchb1-lgort = i_mchb-lgort.
i_mchb1-charg = i_mchb-charg.
i_mchb1-clabs = i_mchb-clabs.
i_mchb1-atinn = i_ausp-atinn.
i_mchb1-atflo = i_mchb-atflv.
i_mchb1-atflv = i_ausp-atflv.
append : i_output, i_mchb1.
clear i_mchb1.
modify i_mchb index l_tabix transporting atflo atflv .
endif.
endloop.
endif.
endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
sort i_output by atinn werks matnr atflv.
else.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
l_tabix = sy-tabix.
At new Characteristic
at new atinn.
read table i_output1 index l_tabix.
format color 1 intensified on.
write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
23(40) i_output1-atnam,
125 sy-vline.
format color off.
format color 4 intensified on.
write: /1 sy-vline, 2(20) 'Plant Name :'(022),
23(4) i_output1-werks, 29(30) i_output1-name1,
125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
clear: g_clabs, g_clabs1.
format color col_normal.
write :/1 sy-vline, 2(18) i_output1-matnr,
20 sy-vline, 21(40) i_output1-maktx,
61 sy-vline.
if i_output1-atflv = c_c23.
write: 62(22) c_g23 centered.
else.
shift i_output1-atflv left deleting leading space.
write: 62(22) i_output1-atflv centered.
endif.
write: 84 sy-vline,
103 sy-vline,
110(5) i_output1-meins.
If the quantity value is negative
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
hide : i_output1.
new-line.
At end of material
at end of matnr.
sum.
move : i_output1-matnr to g_matnr.
format color 3 intensified on.
write /1(125) sy-uline.
write :/1 sy-vline, 2(25) 'Total for Material :'(012),
28(18) g_matnr.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
write: 125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
At end of plant
at end of werks.
sum.
move : i_output1-werks to g_werks.
format color 3 intensified off.
write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
28(4) g_werks.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
At end of characteristic
at end of atinn.
read table i_output1 index l_tabix.
sum.
format color 3 intensified on.
write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
28(25) i_output1-atnam.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
g_cursor = c_cursor2 or
g_cursor = c_cursor3 or
g_cursor = c_cursor4 or
g_cursor = c_cursor5 or
g_cursor = c_cursor6.
format color 3.
write: /1 sy-vline,
2(17) 'Material Number :'(020),
20(17) i_output1-matnr,
94 sy-vline.
format color off.
write /1(94) sy-uline.
loop at i_mchb1 where matnr = i_output1-matnr and
atinn = i_output1-atinn and
atflo = i_output1-atflv.
format color col_normal.
shift i_mchb1-charg left deleting leading '0'.
write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
18 sy-vline, 19(17) i_mchb1-charg centered,
36 sy-vline.
if i_output1-atnam cs c_ratio.
write: 37(29) i_mchb1-atflv
exponent 0 decimals 2 centered.
else.
write : 37(29) i_mchb1-atflv
exponent 0 decimals 0 centered.
endif.
write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
94 sy-vline.
format color off.
endloop.
write /1(94) sy-uline.
else.
message s899 with 'Invalid cursor position'(016).
exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
18 sy-vline, 19(17) 'Batch Number'(017) centered,
36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
66 sy-vline, 67(27) 'Quantity'(019) centered,
94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
clear g_atinn.
i_output1-atinn = i_output-atinn.
i_output1-atnam = i_output-atnam .
i_output1-werks = i_output-werks.
i_output1-name1 = i_output-name1.
i_output1-matnr = i_output-matnr.
i_output1-maktx = i_output-maktx.
i_output1-clabs = i_output-clabs.
i_output1-meins = i_output-meins.
call function 'CONVERSION_EXIT_ATINN_OUTPUT'
exporting
input = i_output-atinn
importing
output = g_atinn.
if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
if i_output-atflv between c_13 and c_1499.
i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_output-atflv between c_15 and c_1699.
i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_output-atflv between c_17 and c_1899.
i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_output-atflv between c_19 and c_2099.
i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_output-atflv between c_21 and c_2299.
i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_output-atflv >= c_23.
i_output1-atflv = c_23.
endif.
write i_output1-atflv to i_output1-atflv .
else.
write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
endif.
collect i_output1.
clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
<b>Reward points for useful Answers</b>
Regards
Anji -
From which table characteristics value is been picked in Batch(023 class)
Hi gurus,
Could anyone helpme out of this problem
While creating migo ,batch no gets automatically assigned for the material when I click on the check button and then clicking the classification screen , characteristics value have to be given manually for the material that is to be receipt in migo.
Now My problem is I am creating a report where the material no along with the batch no and the characteristics value of the batch is required , but I cannot get the table name
I have tried with mcha,mch2,mch1 but here no characteristics value could be derived ,Table Cawn,cabn is there but how to link with other tables like mseg or MKPF.
In table AUSP characteristics value is picking but same problem how to link it with mseg or mkpf etc.
Guys please help me out of this.
Thanks N regrds,
SiddhrthaHi
CABN Characteristics ( o.a. batch/vendor)
CABNT Characteristics description
CAWN Characteristics ( o.a. material)
CAWNT Characteristics description
AUSP Characteristic Values
Class types and objects :TCLAO Several class types for object
TCLA Class types ( vb. lfa1 => v10 en 010)
TCLAT Class type text
TCLT Classifiable objects
TCLC Classification status
Regards -
From which table characteristics value of Batch management is been picked
Hi gurus,
Could anyone helpme out of this problem
While creating migo ,batch no gets automatically assigned for the material when I click on the check button and then clicking the classification button , there characteristics value have to be given manually for the material that is to be receipt in migo.
Now My problem is I am creating a report where the material no along with the batch no and the characteristics value of the batch is required , but I cannot get the table name
I have tried with mcha,mch2,mch1 but here no characteristics value could be derived ,Table Cawn,cabn is there but how to link with other tables like mseg or MKPF.
In table AUSP characteristics value is picking but same problem how to link it with mseg or mkpf etc.
Guys please help me out of this.
Thanks N regrds,
SiddhrthaHi Merwyn,
I cannot find any common field between AUSP and MCH1 ,could you tell me the procedure to link these 2 tables.
Thanks N Regards
Siddhartha Chatterjee
Hi,
Using AUSP table pick the object No. and link it with MCH1 to find the Batch No.
using the batch No. link to MSEG-CHARG -
Assigning of characteristics value for a batch
Hi All,
Please help regarding the assigning of characteristics value for a batch in transaction code MSC2N or MSC2 in the classification tab.
If Function modules or BAPI is available pls advise the inputs to be provided for the function modules.
Here is one function module which i searched, but if i run this function module, i am not able to commit my characteristics value.
The function module is CIF_BATCHCHAR_MAP.
For the above function module the inputs which i have given are...
Material number
Batch
Plant
Class type
Class Number
Characteristics name
Characteristics value
Expecting your earliest reply.
Thanks,
G.C.Arravind Kumar VikramTry the code below
*.1 create key
it_objects-key_field = 'MATNR'.
it_objects-value_int = matnr.
APPEND it_objects.
it_objects-key_field = 'CHARG'.
it_objects-value_int = charge.
APPEND it_objects.
CLEAR l_objectkey.
CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
EXPORTING
objecttable = 'MCH1'
IMPORTING
objectkey_conc = l_objectkey
TABLES
objectkeytable = it_objects
return = it_return2.
2 fill it_num it_char it_curr with values
3 change characteristics
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
objectkey = l_objectkey
objecttable = 'MCH1'
classnum = it_class-classnum
classtype = '023'
TABLES
allocvaluesnumnew = it_num
allocvaluescharnew = it_char
allocvaluescurrnew = it_curr
return = it_return. -
How to show the Characteristics Values of Batch appear upon Search?
Dear all
We are implementing SAP for Wood Industry.
Facts:
1. There are 3 batches created for the raw material.
2. Each batch has the characteristics of Thickness, Width, Length with characteristics value 24mm, 140mm, 1530mm
3. 1 Production Order has been create to produce raw material (RM) to semifinised goods (SM).
Quetions:
During GI to Produciton Order using MVT 261, when we try to select batches from the Item Detail level, the pop up search windows only show us the existing 3 Batch Numbers available for the RM, it does not show the characteristics value "thickness, Width, length" that describe each batch.
And this has caused serious problem to use during their selection of batch as batch number will only make more sense to them if it is shown together with the characteristics value.
Apart of opening additional screen to show the batch information of each batch, is there any config I need to do to solve this situation?
Mark will be given handsomely.
Thanks.Hi,
it is possible to use another search help (Tab Strip: Search for batches via classes, when you press F4 in the batch field).
Here you have to enter the class number first.
Then you get a list of all characteristics in this class, and you can narrow your selection, by setting values for specific characteristics.
After that, press F8 (Find in initial class)
You will get a list of batches, assigned to the selected class, and fullfilling your selection criteria.
Now you can display either the characteristics of a single batch, or you can define a layout for the ALV-Table control, with all characteristics, which you want to see in the overview.
Another possibility is, to open up the 'batch information cockpit' (transaction BMBC) in a separate mode. Here you can see the characteristics ( if you define a selection class on tab strip 'Characteristics' ), e.g. in combination with stock information, which might be relevant as well.
Here you can download some screenshots (link wiil be valid for 80 days)
Link: [https://sapmats-de.sap-ag.de/download/download.cgi?id=B7BKFOTZKKGJ73YA86VZISCMALG8DTQRTX1YX02892OT1D308Z]
Kind Regards
Michael Franz
IBU Mil Products & Mining
SAP AG -
How to find batches from characteristics value
Dear Team
How to find no. of batches from characteristic value used in that batch class?
B.R.
Ramesh kumarHi Ramesh,
Please try with BMBC.
For characteristics value you can set it from customizing->Batch where used list.
Regards,
Krishnendu. -
Change Documents for batch characteristics
Dear Guys,
Badly in need of your help !
In our project, we are required to report changes made on batches characteristics.
My program fetches records from CDPOS table that has change doc. object as 'CLASSIFY'.
The challenge is to find the new and old value. They are not directly stored in VALUE NEW and VALUE OLD. They are simply '1'.
I'm sure that they are stored somewhere in the database because the vlaue before and after change can be seen in the transaction mch3n via menu-> Display Change Documents.
I tried hard finding the table-field but looks like its not straight forward. This is really challenging.
Regards,
AshokGert,
The change done in the project profile will only affect newly created projects.
Have you checked if change documents are created for new projects?
Hope this helps
Rgds
Martina -
How can I reduce the selection for the characteristics value in a BW query
Good morning,
I need to find out how I can reduce the selection for the characteristics values in a BW query.
In a BW query I have a characteristic "Due month".
The characteristic values shown in the query are from 01.2001->03.2007. I would like to reduce it to the last 2 years,in the query view, without deleting the data for the other years in the cube.
Do you know how this can be done?
Thank you in advance for your feedback.
Kind regards,
Linda Verding
Staff Consultant - CSChi,
First thing you have to do is check the report how the data is being restricted only to those months.
1) one it can be variable in which the code is written for that to populate for last few years.
or else it must have been hardcoded for these months.
Go into your report and underneath the characteristicsCALMONTH there must be an variable or hardcoding.
You need to change this here in the report.
You dont have to delete anything there.
Regards, Siva
Maybe you are looking for
-
Where is the Enterprise Manager in Oracle 8.1.5
Hi, After installing Oracle 8i (8.1.5), I can't find the Oracle Enterprise Manager. Where is it? In Oracle 8.0.5 on NT, you can access it from the START button. In the Oracle 8.1.5 documentation, it talks about the Microsoft Management Console where
-
How to find out the selected line in the table control
Hi Guys, i have a requirement like this. i have table control and the internal table for that table control as IT_CASE. this internal table i declared as CHECKBX, MATNR, QUANTITY. but when i am enter the values in the table control i am getting the v
-
How to connect hdmi cable on hp g60 to sony bravia lcd?
how to connect hdmi cable on hp g60 to sony bravia lcd?
-
All rows in table do not qualify for specified partition
SQL> Alter Table ABC 2 Exchange Partition P1 With Table XYZ; Table altered. SQL> Alter Table ABC 2 Exchange Partition P2 With Table XYZ; Exchange Partition P2 With Table XYZ ERROR at line 2: ORA-14099: all rows in table do not qualify for specified p
-
hi all ! i m new in the field of BW,just want to know whether the database for BW is same as at the extreme end of sap R/3 or a different database with different fields is maintained. thanks in advance manish