Batch Classification by class type 022

Hi all,
We are using batch management at material level and present class type 023. We are looking at changing the class type to 022 as we need some information to be retained at plant level.
While creating class for class type 022 the system gives an error " Internal class type 022 cannot be used in class maintenance
Message no. CL089"
Can somebody let me know the reason and solution for this error? Is it due to the fact that we have set the batch at material level?
Also, it would b great if someone can share his/her experience in changing batch clases, even class conversion.
Best Regards,
VS

Hi VS,
I think that you should change the customizing first. Class types 022 and 023 can not be created simultaneously. It is either 022 or 023.
Be careful : I did it long time ago but there is one way you can do (023 to 022 or 022 to 023 I don't remember) but you cannot reverse it.
Rgds,
Philippe

Similar Messages

  • About  Batch classification(Of class type 023) in new batch

    hi:
       I had assigned a batch class 'ZBC'(Of class type 023)  to material 'A'. So, when I use t-code "msc1n" to creat a new batch for the materia A, I find the system does not check the 'classification' view ,and after maintaing 'Basic Data1'  view , I can directly save new batch even if the values of batch character  is empty.I had specified the batch characer must be entry value in the batch class 'ZBC'(Of class type 023).
        I want to system check it ,and give me a message for it ,and couldn't save the batc if the values of batch character  is empty.
       So ,I wonder how to control it?
    Edited by: kaien wang on Jun 10, 2009 5:40 AM

    Dear Amitabha,
    Thans for you attention.
    In my characteristics definition, I didn't use any reference table field . the values of  'addnl data'  view in the characteristic is keeping blank.
    best regards,
    yours kaien

  • Multiple classification In Class Type 023(Batch Class)

    Dear All,
    I  like to do a multiple classification in Class Type 023(Batch Class) but in Configuration System not allowed to do any change in MCHA Object for multiple Classification
    So pls give me a suggestion.
    Regards,
    Murari Shah

    see OSS Note 115581 - No multiple classification for batches

  • What's the difference between batch class type 022 and 023?

    Hi Guys,
    I find that some of my SAP client only have class 022 and some have 023, but no client has  them all. I don't know why it happed.
    So what's the difference between batch class type 022 and 023?  Which setting decide which class to be used ?
    Thanks.

    Hi nitin,
    Read  http://www.sapfans.com/forums/viewtopic.php?t=212819&highlight=022  you will know the difference between 022 and 023 .
    Use tcode OMCT you can switch batch level .

  • The difference between batch class type 022 and 023

    what's difference between batch class type 022 and 023?  023 is described as standard batch class type, but there is only 022 type exists in my system. can i use 022?

    Hi,
    both classes mean the same, but which class is used is decieded by batch level. In case of material level or client level the system use automatically only class 023. If you define batch level to plant the system use automatically class 022.
    Regards,
    Abhee.

  • Class type 022 is not defined for object for BATMAS

    Hi Experts,
    while creaitng the LSMW for batch classification,I faced the error during IDOC processing as "Class type 022 is not defined for object".I am using
    Business Object      BUS1001002
    Method               SAVEREPLICA
    Message Type         BATMAS
    Basic Type           BATMAS03
    Pleas guide how to resolve the error.
    Also ,as I intend to make LSMW for batch classifications.Is this the correct way.
    Please guide on this also.
    Regards.

    Hello Jass,
    Symptom
    The BATMAS03 basis type (message type BATMAS) /FB BAPI_BATCH_REPLICATE  cannot transfer any classification information. Please review note 1070634.
    First Option :
    You should first transfer the batmas and then the clfmas idoc.
    Second Option :
    You could create the batch together with classification. Normally the problem is the missing CUOBJ_BM in table MCH1. It is not necessary in all situations that the field have to be filled, but it can be in some cases (And it is better to store the right  information in the corresponding fields). Especially when you transfer batch/classification information in other system the field have to be filled.
    The way to create the batch TOGETHER with classification by using BATMAS IDOC is to set the following parameters correctly :-
    set E1BPBATCHCTRL-DOCLASSIFY to X and fill the segments with relevant classification information
    E1BP3060_ALLOCATION
    E1BP3060_VALUATION_CHAR
    E1BP3060_VALUATION_CURR
    E1BP3060_VALUATION_NUM
    In this case the field mch1-cuobj_bm should be filled with correct CUOBJ. You can also use function module BAPI_BATCH_SAVE_REPLICA to create batches together with classification.
    Hope this information helps
    Regards
    Amber

  • Class type 022 is not defined for object for batmas in LSMW idoc

    Hi Experts,
    while creaitng the LSMW for batch classification,I faced the error during IDOC processing as "Class type 022 is not defined for object".I am using
    Business Object BUS1001002
    Method SAVEREPLICA
    Message Type BATMAS
    Basic Type BATMAS03
    Pleas guide how to resolve the error.
    Also ,as I intend to make LSMW for batch classifications.Is this the correct way.
    Please guide on this also.
    Regards.

    Hi,
    Go to TCode OMCE and check the batch level.
    If batch is activated at material/client level then use class type 023, if it is at plant level the class type 022.

  • How to transfer classification data (class type 001) in ecc to crm

    Hi. dear
       I have a problem in transfering classification data (class type 001). we use classification data in material (mm01) in ecc, class type is 001, but now I have to transfer the classification data to crm.
    i had downloaded the CLASS,ATTRIBUTE and OBJCL,MATERIAL,but i don't see classification data in  crm.
    please let me konw :
    (1) how can i transfer classification data (class type 001) to crm.
    (2)how can i see these data in crm
    thanks
    zong

    first, very thanks , i had seen the note 428989, but, i wonder if there are other method to resovle the problem.
    In ecc, the classification data have many charicter ,but ,in crm, how can i display the classification data . in product data,of crm,  i cannot see any tab to display the data. what can i do in crm to display the classification data.

  • Master recipe- classification- change class type

    Hi Gurus, trying to change the class type in c202, recipe header tab, classification tab, class type to 019. but 018 looks gradeout can not be changed. could you please advise how can we change this setting to 018? thank you.

    Hi,
    its a Config setting go to t code O1CL select the table PLKO & select the Object dialogue structure.
    Its a standard setting be clear with your scenario u r looking fwd..
    Manu

  • How to change material classification for class type 023

    Hi Expert,
    I want to change class ZSK_EXPIRY_DATE to ZSKK_GR_DATE under class type 023 in classfication tab (MM02). Understand that the same class also assigned to material and batch in MSC3N. So i'm sure it's not as easy asdo the direct change in CL20N. Can i anyone please guide me step by step to change it? What is the pre-requisite and the impact of the change that i have to care of..
    Thanks/Regards,

    Hi Crystal,
    You consume all the materials created with the earlier batch classification and then try to change it. or keep the assinged class and then create your new required class and then assign the new class to the material in classification view and start using the new one.
    Chris

  • Customer classification - use class type 011 or copy?

    Hi - We have a requirement for some customers to have additional information stored w/them and are planning on using the Classification system.
    We have already created and are using one class under class type 011 for a different purpose / different set of data.
    I know I can create a new class under existing/standard class type 011; however I am wondering if there is any benefit to creating a new class type, for example, Z11 by copying 011 and creating my new class under type Z11?
    I'm asking because I have seen, in the case of material, multiple "Z" class types for further describing materials, each with one class instead of multiple classes under standard class types.
    Thank you - Matt

    dear Matt,
    do you really need to create a new class type?
    look, before to proceed take into account that class type determines the following:
    which object types you can assign to a class
    which class maintenance functions you can process
    whether you can classify objects in more than one class
    which class statuses, organizational areas, and text types are supported in class maintenance functions
    whether you can use engineering change management for classification
    which filter functions you can use to restrict the search result
    good luck!

  • Batch Classification for Finished Goods

    Hi,
    Can anybody explain me the significance of maintaining batch classification data for a finished material?
    Currently we have batch management active for all the finished materials but for some materials we have not maintained the classification data.
    When I checked the batch data in MMBE it shows me the Production date & Shelf life expiration date based on the values maintained in the material master.
    The class type is maintained at the plant level as 022 with characteristics as Last Goods Receipt & Shelf Life Expiration date.
    I want to know what impact will be on the distribution of these materials if I do not maintain the classification data?
    Thanks & Regards,
    Abhijit

    Hi Ravi & Lakshman,
    Thanks a lot for the response. I understand what batch classification is & how it is implemented to use in coordination with Batch Determination. What I would like to know is what if the batch search strategy & class type (022) is defined at the plant level and  batch management for a finished material is active but classification data is not maintained. GR (101) for this finished material is possible but does this mean that not having classification data will not have any impact on the goods movement of this material?
    In case of production when the classification data is not maintained for a back flushed material (raw / semifinish), after the process order confirmation the 261 movements end up in COGI with reason Enter Batch. Since the selection criteria fails due to the unavailability of classification data; the batch needs to be selected manually instead of the system picking up the correct batch automatically.
    Like in inventory (consumption of raw & semifinish) do we have batch determination & search strategy for distribution where the finished stock will be picked up for the sales orders based on the selection criteria & sorting rule?
    Thanks & regards,
    Abhijit
    Edited by: Abhijeet K. Nerurkar on Feb 14, 2011 2:18 AM

  • User Exit for batch classification for tcode mb1c

    HI experts,
    I have implement customer exit MBCFC004 EXIT_SAPMM07M_004 and CLFM0002 EXIT_SAPLCLFM_002 to set a value for
    a customize  characteristics.
    Now I have a issue.
    MBCFC004 EXIT_SAPMM07M_004  can work with migo but when I with mb1c to do same transaction it didn't
    work.
    CLFM0002 EXIT_SAPLCLFM_002  only work when I input a value in the customize  characteristics it can change the input value.
    I have set extension in OMCV for my move type. and assigned the bath to material.
    I have reference
        Re: User Exit for batch classification
    but I haven't found any question for my solution.
    please help me.
    thanks a lot.

    Class ZBATCH has status 1 (= 'Released') but the customizing of classtype 023 doesn't allow to classify with classes of this status. Settingsfor class status in class type 023 are different from what SAP delivers.Correct please these settings. You may lookup the correct definition of
    the class status in class type 022.

  • Tables for Batch classification for materials

    Hi SAP gurus,
    I have an issue that I need to display the values for a number of materials in its classification view (class type 023) without using MM03.
    Could anyone please let me know the table(s) where I can find this?
    Thanks !!

    Hi Moumita_kar,
    Characteristics :
    CABN      Characteristics ( o.a. batch/vendor)
    CABNT      Characteristics description
    CAWN      Characteristics ( o.a. material)
    CAWNT      Characteristics description
    AUSP      Characteristic Values
    Class types and objects :
    TCLAO      Several class types for object
    TCLA      Class types ( vb. lfa1 => v10 en 010)
    TCLAT      Class type text
    TCLT      Classifiable objects
    TCLC      Classification status
    Links :
    INOB      Link between Internal Number and Object
    KLAH      Class header data
    KSSK      Allocation Table: Object (vb.matnr) to Class
    KSML      Characteristics for a class (internal number)
    Please try and confirm.
    Regards
    Suri

  • Batch classification characteristics(CTBW)

    Dear gurus,
                    I am trying to create a CL Datasource for Batch class(class type -022).I am not sure which " Basis Datasource" and which "Object Table" i should input in CTBW ??Can someone taketime to shed some light on this.
    manythanks
    arun

    try an F4 on the table field... it gives you some options (it'll depend how batches are setup in your R/3 system... most likely you'll need table MCHA)
    basic DataSource... I would assume you like to add this data to 0MATERIAL (so 0MATERIAL_ATTR)?

Maybe you are looking for

  • IPhone 5, iCloud calendar reminder issue

    When I use the iCloud calendar on my iPhone 5 and make an event with a reminder set to "on time of event", it will sometimes just beep and flash a notice on lock screen for a few seconds and then the notice disappear from lockscreen. Sometimes though

  • External Hard Drives- Shared Vs. Mounted Device & Time Machine

    If you connect an external via firewire 800 it's fast for streaming itunes music, iphoto and high def movies- AND it's contacts will back up to your time capsule. If you also connect it via USB to the time capsule you can even access it via back to m

  • IWorks in English on non-English OS

    I downloaded the iWorks trial and I've ordered it from the store. I would like it in English despite the fact that my OS is in French. Is there some way to do this or will iWorks insist on remaining in the language of the OS ?

  • Know how there's two timers (left, right)? the right one doesn't run

    Normally there are two timers next to the current song status: 1) how much time since the beginning of the song, and 2) how much time until the end. For some reason, the second one doesn't work and all it displays is the total length of the current s

  • Will my itunes/app store credit transfer over when I change countries?

    I currently have about $40 on my account, do I have to spend it all before I move (from US to Canada)? Or will it transfer over? Thanks for the help!