Batch Classification - copy values

Hi,
One of the requirements on the SD side is to print, the Batch class Characteristic values from the Raw MAterial on the Finished good's Invoice. Having performance concerns about reading MB56 for each Invoice line item, I was wondering if there is anyway to copy Batch characteristics values from the RM to the Finished good during Production ORder completion or any such process. All products are Batch managed.
Would appreciate any inputs from you with similar requirements and your solutioning to it.
Thks in Advance!

It is not required that both the materials should have the same characterisitics.
It completely depends on your requirement and development, of what characterisitics to be copied.
If you need the total characteristics of the RM to be copied to FG then you should have the Characterisitcs in common.
What ever the characteristics you want to copy should exist in both the materials.
Hope this helps you.

Similar Messages

Batch Classification Characteristic Values in MIGO...

Hi,
Can we update Batch Classification Characteristic Values in MIGO...
Batch is also created while doing MIGO. I have no issues in creating Batch.
Thanks in advance...

Hi.
You can use the CACL_VALUE_CHANGE badi.
Regards.

Batch classification "Date of last goods receipt" is "00.00.0000"

Dear all,
I have configured all steps for batch determination for FIFO.
It worked fine for IM (stock transfer - mov.type 301) on last friday, however, get the issue today:
- After I do GR (mov.type 101), the batch is auto created, batch classification is created,
I use MSC2N to view batch classification:
the value of "Date of last goods receipt" is "00.00.0000"
What is wrong with my configuration?
Could you pls help me to fix this?
Thanl you very much for you help!
Edited by: Ngo Quoc Hung on Dec 13, 2010 10:59 AM

System Updates Batch Data in the Batch Master Record in the Following ways :
1) If the batch does not yet exist for the plant, it is automatically created.
2) If the batch already exists for the plant, the new quantity is simply posted as a receipt in the specified storage location.
When posting a goods receipt with reference to Purchase order, the system updates Posting date as the goods receipt date in general data of the batch.

Copy of Material Master charac. values to the batch classif. in GR for PO

Dear gurus,
Could you please help me with the following issue. I have a material managed in batches, and it has a classification type 023 in material master. I fill one chaacteristic of this classification with some value. Now I want this value to be copied to the batch classification during the creation of new batch while making GR to production order.
Is it possible?

Hi Nikolaj,
What I am understand your requirement is like,
You want to fetch the value of Characteristic maintain in Batch class in Material master to the Batches, correct?
But my Friend if you maintain value of characteristic in Batch Class in material master then it will works as a validation.
For Example,
Suppose your Characteristic is Colour and in Material Master Batch classification view you have maintain value as Red.Then system will not allow you any other colour in Batches.You will find that value in Drop Down list.
Regards,
Dhaval

Batch Classification Values not getting changed

Hi Gurus,
I am using the following bapi ( BAPI_OBJCL_CHANGE ) to change Batch classification values Eg: Cut clarity etc.
when i pass these values thru the function module in the program it is not getting changed while when i change it through msc2n it gets changed successfully...
I have passed the following values in the parameters of the bapi :
OBJECTKEY            = v_objectkey
OBJECTTABLE        = 'MCH1'
CLASSNUM             = V_CLASSNUM
CLASSTYPE           = '023'
KEYDATE                = 30.04.2010
ALLOCVALUESCHARNEW
CHARACT = CLARITY
VALUE_CHAR = P040
VALUE_NEW   = P040.
Can some one help me solve this....
Needed urgently..
Edited by: NAVIN FERNANDES on Apr 30, 2010 12:31 PM
Edited by: NAVIN FERNANDES on Apr 30, 2010 12:32 PM

Hi Jacky,
I am posting the code here.. Do let me know if u have ne queries:
REPORT ZNAVBATCH.
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: P_MATNR TYPE MATNR,
            P_CHARG TYPE CHARG_D,
            P_WERKS TYPE WERKS_D,
            P_LGORT TYPE LGORT_D.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
DATA: WA_BATCH TYPE BAPI1003_OBJECT_KEYS,
        WA_ALLOCCHAR TYPE BAPI1003_ALLOC_VALUES_CHAR,
        WA_ALLOCVAL TYPE BAPI1003_ALLOC_VALUES_NUM,
        INT_BATCH TYPE STANDARD TABLE OF BAPI1003_OBJECT_KEYS,
        INT_RET1 TYPE STANDARD TABLE OF BAPIRET2,
        INT_RET2 TYPE STANDARD TABLE OF BAPIRET2,
        INT_RET3 TYPE STANDARD TABLE OF BAPIRET2,
        LV_KEY TYPE BAPI1003_KEY-OBJECT,
        INT_ALLOCVAL TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_NUM,
        INT_ALLOCCHAR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CHAR,
        INT_ALLOCCURR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CURR.
WA_BATCH-KEY_FIELD = 'MATNR'.
WA_BATCH-VALUE_INT = P_MATNR.
APPEND WA_BATCH TO INT_BATCH.
WA_BATCH-KEY_FIELD = 'CHARG'.
WA_BATCH-VALUE_INT = P_CHARG.
APPEND WA_BATCH TO INT_BATCH.
CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
    EXPORTING
      OBJECTTABLE    = 'MCH1'
    IMPORTING
      OBJECTKEY_CONC = LV_KEY
    TABLES
      OBJECTKEYTABLE = INT_BATCH
      RETURN         = INT_RET1.
IF SY-SUBRC = 0.
   WRITE: 'SUCCESSFUL'.
    CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
      EXPORTING
        OBJECTKEY              = LV_KEY
        OBJECTTABLE            = 'MCH1'
        CLASSNUM               = 'ZTBATCHCHR'
        CLASSTYPE              = '023'
        KEYDATE                = SY-DATUM
      UNVALUATED_CHARS       = ' '
      LANGUAGE               = SY-LANGU
    IMPORTING
      STATUS                 =
      STANDARDCLASS          =
      TABLES
        ALLOCVALUESNUM         = INT_ALLOCVAL
        ALLOCVALUESCHAR        = INT_ALLOCCHAR
        ALLOCVALUESCURR        = INT_ALLOCCURR
        RETURN                 = INT_RET2
    IF SY-SUBRC = 0.
      WRITE : 'SUCCESSFUL'.
      READ TABLE INT_ALLOCCHAR INTO WA_ALLOCCHAR WITH KEY CHARACT = 'CLARITY'.
      IF SY-SUBRC = 0.
        WA_ALLOCCHAR-VALUE_CHAR = 'C02'.
        WA_ALLOCCHAR-VALUE_NEUTRAL = 'C02'.
        MODIFY INT_ALLOCCHAR FROM WA_ALLOCCHAR INDEX SY-TABIX TRANSPORTING VALUE_CHAR VALUE_NEUTRAL.
      ENDIF.
      CALL FUNCTION 'BAPI_OBJCL_CHANGE'
        EXPORTING
          OBJECTKEY                = LV_KEY
          OBJECTTABLE              = 'MCH1'
          CLASSNUM                 = 'ZTBATCHCHR'
          CLASSTYPE                = '023'
         STATUS                   = '1'
         STANDARDCLASS            =
         CHANGENUMBER             =
         KEYDATE                  = SY-DATUM
         NO_DEFAULT_VALUES        = ' '
       IMPORTING
         CLASSIF_STATUS           =
        TABLES
          ALLOCVALUESNUMNEW        = INT_ALLOCVAL
          ALLOCVALUESCHARNEW       = INT_ALLOCCHAR
          ALLOCVALUESCURRNEW       = INT_ALLOCCURR
          RETURN                   = INT_RET3
      IF SY-SUBRC = 0.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
           WAIT          = 'X'
        IMPORTING
          RETURN        =
        IF SY-SUBRC = 0.
          WRITE: 'SUCCESSFUL'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDIF.

Copy batch classification in GR (101)

Dear gurus,
Could you please help me with the following issue.
I have a material managed in batches, and it has a classification type 023 in material master.
Now I want the class (with all characteristics) to be copied to the batch classification during the good reciept (MIGO / 101).
How it's possible?
When i go to the batch generated in migo (101) using T-code MSC2N, there is one icone in Classification-tab "Create classification". and i can do it manually. how can we do this automatically in GR (101).
Thanks in advance.

Hi,
Check for that movement type in OMJJ in Entry control tab where there is field called classification batch, check what is defined for that movement type.
Regards
Ravi Shankar.

Batch classification details

Hi Experts,
I would liek to ask your help.
We have issue on batch classification details.
During GR, the batch classification details created are not complete, as checked in MSC3N. Why do this happen? Could you kindly help me sort out this problem?
Thank you very much for your help.
Mylene

Dear Mylene
Materials Management -> Inventory Management and Physical Inventory -> Movement Types -> Copy, Change Movement Types
It is not plant specific. This will popup a window to enter the values for classification.
You can also use transaction OMCV
Logistics - General -> Batch Management -> Batch Valuation -> Valuation for Goods Movement in Inventory Management -> Activate Batch Classification for Goods Movements in IM.
Regards
Soundar

Automatic batch classification with procedure on goods receipt does not wor

Hi,
I have a material with batch classification.
The material has two characteristics.
One is a number called VALUE.
The other is also a number (called CONVERSION) and shall be deived from the first.
A procedure is created and assigned to the second characteristic.
$SET_DEFAULT ($SELF, CONVERSION , $SELF.VALUE / 6000)
When I post a goods receive (movement Type 501) the characteristics can be filled . The field VALUE is set with 12000.
I was expecting the characteristic CONVERSION to be calculated as '2' and filled by the procedure.
This is not the case.
If however, I try to fill it manually, the system accepts only the calculated value '2'. Otherwise an error is shown.
How can I force the system to calculate and fill the second characteristic when insserting a value in the first ?
Thanks for any help.

Hi Marcus,
i have the same problem with movement type 101.
How did you solve this issue?
Can you help me.
Thank you.
CM

Different Batch Classification at storage location level

Dear guru ,
I have tested that i can insert different values of batch classification for the same material and the
same batch number but in different plants.
In MSC1N/MSC2N transaction the system allow a insertion at storage location level.
Itu2019s possible to insert different values of batch classification for the same material , same batch number and the same plant but in different storage locations ?
Thanks.

hi,
check in OMCT under which batch level the current system is, if the level is set to be material level or client level, if you make a change to the batch classificaiton, it will reflect in all the plants across the clients.
Batch classification is not maintained at the storage location level.

Need a bapi r fn module to update the batch classification in the bom

hi,
iam working a exit : exit_saplcoml_001.This exit is for material quantity calculation.the materials are currently classified in the material master under the classification tab.Ans due to this the classification becomes cross plant.
To make the material classification plant specific i have decided to maintain the classification in the batch classification of bom.i am finding for a function module r a bapi to update the calculated values in to the batch classification characteristics.please help mi with this.
thanks.

Hi
U can try to use BAPI_MATERIAL_SAVEREPLICA
Max

Batch classification class and MBC3

Hi,
I am a bit confused with the batch determination (i.e. how the R/3 searches the correct batch). Kindly please correct me on the following steps.
1 u2013 Base on OMCG setup, R/3 pulls the batch search procedure base on the movement type in IM.
2 u2013 R/3 searches through the strategy types listed in the search procedure to search for a search strategy.
QUESTION:
Letu2019s say there is this strategy condition type consist of access sequence and a class (to be used in batch classification)
I am a bit confused here when come to the relationship between the classification and the access sequence. How does the R/3 find the correct batch when the R/3 can uses the characteristics from the selection class of the search strategy to look for batches with suitable specifications, in that case does the R/3 still have to access sequence to find the batch again in MBC3?
If R/3 can find the batch through the batch determination from the classification, what is the MBC3 use for? I am confuse here because unlike batch determination, the pricing determination can just go find the right price value for a condition type base on the access sequence and later grab it in MEK3.
The batch classification and MBC3 confused me? Are they both finding the same batch object or redundant to one another? Please explain with an example.
rgd.
Tuff

Hi Jurgen,
So, can you tell me which of the following sequence correct base on what you said.
1 u2013
Movement Type >> Batch Search Procedure >> Strategy Condition Type >> Batch Classification found the batch >> Go to batch condition table (i.e. base on the Access sequence in the strategy type) and get the final batch?
2 u2013
Movement Type >> Batch Search Procedure >> Strategy Condition Type >> Go to batch condition table (i.e. base on the Access sequence in the strategy type) and get the batch >> Go to Batch Classification found the final batch?
Which of the above is correct? And it seems my wording explanation is not quite correctu2026. Am I?
Thanks
Tuff

Basics for Batch Classification Data

Hello Experts ,
I have few queries for Batch Classification Data .
1. Which are the tables where Batch Classification Data for the batches is stored .
2.Which Function module is called once we do the Goods movement which determines the batch
classification data .
3.When we do stock transfer for batches , then the Batch classification will run in Issuing plant and
the batch classi. data will be copied in the receiving plant . Can you please tell me that which object
carries this data from issuing plant to receiving plant.
4.There is also a user exit with which we can play with Batch classification , can you please give some information on this .
Thank you very much for the help !
Regards
Shashank

1. The table is AUSP - but why would you need to know that. There are good function modules to query, read, change classifications of batches - so why would you like to read directly from DB?
2. This depends on your release. Typicall in MIGO the module VB_CREATE_BATCH is called, the same one that is called within the BAPI to create batches.
3. See 2. When you create a batch with reference, you call the same module additionally with the key of the reference batch (this is the issueing batch).
Inside that module are loads of user exits for all kind of purposes.
Why not have a look yourself in Customizing at Logistics General -> Batch Management -> Batch Valuation.
There's the "customer exits for goods movements in inventory management" (this is called e.g. in the goodsmovement bapi and the old transactions) --> EXIT_SAPMM07M_004
and the "Valuation of Creation of New Batches Using Function Module" (this is called in the MSCxN and in MIGO) --> EXIT_SAPLV01Z_014 .
In Customizing there's also the documentation what you can achieve with the exits.
Hope this helps.
Stefan

Batch classification during GR against production order using txn MIGO

Hello All
       I am usng batch classification during for movement type 101, when am doing the GR against production order using txn MB31 the system automatically navigates to classification screen wherein i need to enter the characterstic value & it all goes well, I can also view the stock with batch no and the classifcation value when the GR is being done with txn MB1.
      But when am dong the same thing i.e. GR against production order using txn MIGO system doesnt navigates to classification screen for characterstic value entry and am able to do the posting. I want that system must navigate to classification screen automatically if i do the GR using MIGO also as it doen in the case of txn MB31.
       Please suggest what settings are to be done for the same, I am unable to figure out why the system is behaving in this manner. Kindly provide your inputs to sort out this issue. Waiting for your valuable inputs.
Regards,
J K Tharwani

Dear,
did u refer SAP Note 519303 ?
After keeping Batch Classification as 4 in OMCV, in MIGO, it will start showing the Batch Classification button under "Batch" Tab, it will not show the Batch Classification Pop-up automatically as it shows in case of MB31.
If you wan users to enter the characteristics values mandatorily in the Batch Classification then in CT04 for these characteristics activate Entry required indicator in "Basic Data" Tab
SAP Note 519303
Please refer this also,
[MIGO|Re: How can I get the MRP history?]
Regards,
R.Brahmankar

BADi/UserExit for MIGO : To popup batch classification screen auto

Hi all,
I want to pop up batch classification screen automatically in MIGO when performing a goods movement . In MIGO there is a command button for that to open up the batch classification screen, but my requirement is when click CHECK or SAVE button, branch it to batch classification screen if those characteristics are not maintained.
Please reply .
Thanks and Best regards,
Sandun

HI ,
Chk BADI using these steps..
1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
2. In 'Display' mode, go to 'Methods' tab.
3. Double click the method 'Get Instance' to display it source code.
4. Set a breakpoint on 'CALL METHOD cl_exithandler => get_class_name_by_interface'.
5. Then run your transaction.
6. The screen will stop at this method.
7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.

How can mass create batch classification for many material batches? ?

Hi Experts,
In our system , there are so many material batches which have not been classified，see by
BMBC Tcode.
That means these batches has no values in the batch class. I know we can create
classification for these batches with MSC2N Tcode.
But there are so many batches which have not been classified,more then 2000.
It is not possible to create classification for every batch with with MSC2N once a time.
So how can I create batch classification for so many batches once a time?
How can I mass create batch classification for so many batches??
Thanks for any reply!

Hi,
Please be aware that SAP does not support the use of batch
input in the classification system. SAP recommends you use BAPI's for
example in your case BAPI BAPI_OBJCL_CREATE and BAPI_OBJCL_CHANGE
would be able to help. For more information, please have a look at the
note: 943559 - Point 2 and 13. Point 13 references the note 1083986.
I hope this helps!.
Best Regards,
Arminda Jack

Batch Classification - copy values

Similar Messages

Maybe you are looking for