Batch classification details -mass check -reg

Hi ,
Requirement is as of now batch classification details of a material are checked through MSC3N , where material , plant etc.. are entered and executed .
here we can see for the list of materials one by one only .
is there any t code through which the details can be checked entering materials in multiple / entering material type
if not available in standard SAP , if an ABAP report to be made , please suggest the flow with tables and fields
inputs
material type
material
plant
batch
storage location
out put should be teh batch classification details
Is there any Tcode similar to MSC3N where multiple inputs can be given / details can be taken in mass not entering one by one
pl

Dear,
Please check to table MCH1, AUSP, KSSK, KSML, KLAH
Use these FM.
CLAF_CLASSIFICATION_OF_OBJECTS
[Thread|Re: Get batch characteristic value]
Regards,
R.Brahmankar

Similar Messages

Batch classification details in Goods receipt

Hi ,
In my business for some of the materials i have activated the batch management and the batch classification details in the material master record.
For those materials if i am doing the goods receipt system is allowing to post the document if the batch characterstics are not entered. I have to restrict if the batch characterstics are not allowed it should not able to post.
I have made a message setting LB045 active with'E'. then also it is allowing.
Is there any other message settings to be configuered.

If the classification tab can be accessed in MIGO is depending on your customizing IMG > Logistics - General > Batch Management > Batch Valuation > Valuation for Goods Movement in Inventory Management > Activate Batch Classification for Goods Movements in IM
there you have 5 options:
' ' No branching to batch classification
1 Classification carried out in background (all batches)
2 Classification only in foregr.for mand.charac. (all batches)
3 Classification always in foreground (all batches)
4 Classification in foreground for new batches only
how did you setup it in your system?
from OSS note 519303 - FAQ: Goods movement with Transaction MIGO:
3. Question:
How does the batch classification work in Transaction MIGO?
Answer:
When you post or check a goods movement, the system carries out the classification in the background. If you want to process the batch classification online, use the 'Classification' pushbutton. You can find this pushbutton on the 'Batch' tab page in the detail data of the item.
You cannot automatically go from Transaction MIGO to the batch classification dialog. You can use the adjustable system message (Transaction OCHS) LB 045 to ensure that the complete classification data is entered.

Batch classification details

Hi Experts,
I would liek to ask your help.
We have issue on batch classification details.
During GR, the batch classification details created are not complete, as checked in MSC3N. Why do this happen? Could you kindly help me sort out this problem?
Thank you very much for your help.
Mylene

Dear Mylene
Materials Management -> Inventory Management and Physical Inventory -> Movement Types -> Copy, Change Movement Types
It is not plant specific. This will popup a window to enter the values for classification.
You can also use transaction OMCV
Logistics - General -> Batch Management -> Batch Valuation -> Valuation for Goods Movement in Inventory Management -> Activate Batch Classification for Goods Movements in IM.
Regards
Soundar

How can mass create batch classification for many material batches? ?

Hi Experts,
In our system , there are so many material batches which have not been classified，see by
BMBC Tcode.
That means these batches has no values in the batch class. I know we can create
classification for these batches with MSC2N Tcode.
But there are so many batches which have not been classified,more then 2000.
It is not possible to create classification for every batch with with MSC2N once a time.
So how can I create batch classification for so many batches once a time?
How can I mass create batch classification for so many batches??
Thanks for any reply!

Hi,
Please be aware that SAP does not support the use of batch
input in the classification system. SAP recommends you use BAPI's for
example in your case BAPI BAPI_OBJCL_CREATE and BAPI_OBJCL_CHANGE
would be able to help. For more information, please have a look at the
note: 943559 - Point 2 and 13. Point 13 references the note 1083986.
I hope this helps!.
Best Regards,
Arminda Jack

Batch-Classification - Mass Assignment

Hallo all,
I created a new Class for Batch-Classification.
Now a would assign this new Class to existing Batches in the System.
Unfortunately I didn't found any "MASS" transaction for this change.
Transaction MSC2N has only separatelly usage for it.
Transaction CLN24N can I use only for the material assignment (material master data - classification for batches).
The direct assignment (Material + Batch) I didn't find there.
I'm still looking for something easier then LSMW is.
My question: is any possibility for MASS assignment for existing batches in the system (except LSMW)?
I'm looking forward of your answers
Katie

Hi,
Thank you for your answer.
Transaction MSC5N could be O.K. for a users, I think, that better is BMBC, because there is the function MSC5N integrated.
But I need only assignment for classification fields (without value) to a batch for 100.000 items
For this action are MSC5N and BMBC useless, because I can assign the fields only manually for every item there.
Regards
Katie

MIGO - how check batch classification.

Hi all,
When using the transaction Migo (create), the user can enter a certain characteristic through -> batch -> classification for each position. I have to check that the input code is not already used in another posizion.
I found the Badi CACL_VALUE_CHANGE, but at this point I have only the characteristic of a single position.
Does anybody know the internal table which stores the characteristics and at what point can I go to check them?
I also found these internal tables IZH, AMM and ZM, but at the time of final check, they are not available.
I thank you in advance

Hi,
You can get the characteristic values from the standad table AUSP , and table CHVW.
Thanks and Regards,
Narayani

MATMAS idoc with classification details - reg

Hi,
I am working in a project related to the transfer of Material Master from one system to another ( Both are R/3 systems).
I am currently using the message type MATMAS with basic type MATMAS05. With the above message type i am able to generate an idoc from source system with all of the details except for the classification details.
For classification i have configured the message type CLFMAS and CHRMAS, in the CLFMAS i am able to successfully generate an idoc with BD91/BD92 tcodes. But when the idoc is generated, the idoc gives the list of charactersistics managed in the class at each segment level but not able to retrieve the values maintained by me during the material master creation. In order the target values for each of the characteristics in the class is empty.
Please clarify me with the following queries:-
a) Is that really required to push both CLFMAS and CHRMAS for a material master classification related field values ?
b) How to get the characteristics values maintained in the material master at the idoc level ?
c) How to link the CLFMAS generated idoc and the MATMAS idoc to link the relationship?
Thanks for the understanding.
Thanks and Regards,

Classification of a material has to be send with CLFMAS IDOC separate from the material.
Usually you first distribute all characteristics and classes, then the materials, finally the classification.
You have to enter the new material number in segment E1OCLFM field OBJEK of your classification Idoc.

Batch Classification im MIGO

Dear All,
I'm trying to do the customising for MIGO where i have to maintain the batch characteristics. I've created a class with characteristics and assigned it to material. Then in OMJJ, in the detail of 101, I've marked the batch classification as '3'.
Then i did GR but no batch classification showed up as mandatory. Is this normal or is there any remaining customising ?
Best regards,

Hi,
Make sure that you check the checkbox batch management in purchasing viw of material
Also assign the class you have created with asignment of characteriscs in classification view of the material and the do with PO and GR then you can see the tab batches.
Thanks.

Different Batch Classification at storage location level

Dear guru ,
I have tested that i can insert different values of batch classification for the same material and the
same batch number but in different plants.
In MSC1N/MSC2N transaction the system allow a insertion at storage location level.
Itu2019s possible to insert different values of batch classification for the same material , same batch number and the same plant but in different storage locations ?
Thanks.

hi,
check in OMCT under which batch level the current system is, if the level is set to be material level or client level, if you make a change to the batch classificaiton, it will reflect in all the plants across the clients.
Batch classification is not maintained at the storage location level.

How to view ALL batch job details (SM37) at one glance ?

Dear all,
I am documenting all released batch job details, the information required includes the job name, client number, job frequency .. etc.
In order to see that information, i go to SM37 and click on each job to see the details. I have about 60 jobs released, to get their details i have to click on them at least 60 times.
Is there a report or table that i can refer to that provides me the information of all the jobs in one screen ?
Thanks.
Advice and comment will be appreciated.
Regards,
Kent

Dear Prashanth,
Thanks for the link, I managed to get the required information from table TBTCO or TBTCP with below selected fields.
JOBNAME = Background job name
SDLSTRTDT = Planned Start Date for Background Job
SDLSTRTTM = Planned start time for background Job
SDLUNAME = Initiator of job/step scheduling
PRDMINS = Duration period (in minutes) for a batch job
PRDHOURS = Duration period (in hours) for a batch job
PRDDAYS = Duration (in days) of DBA action
PRDWEEKS = Duration period (in weeks) for a batch job
PRDMONTHS = Duration period (in months) for a batch job
PERIODIC = Periodic jobs indicator ('X')
STATUS = State of Background Job, S = Released, F = Finished
AUTHCKMAN = Background client for authorization check
EVENTID = Background Processing Event
EVENTPARM = Background Event Parameters (Such as, Jobname/Jobcount)
Dear Juan,
Thanks for your reply.
Regards,
Kent

Copy batch classification in GR (101)

Dear gurus,
Could you please help me with the following issue.
I have a material managed in batches, and it has a classification type 023 in material master.
Now I want the class (with all characteristics) to be copied to the batch classification during the good reciept (MIGO / 101).
How it's possible?
When i go to the batch generated in migo (101) using T-code MSC2N, there is one icone in Classification-tab "Create classification". and i can do it manually. how can we do this automatically in GR (101).
Thanks in advance.

Hi,
Check for that movement type in OMJJ in Entry control tab where there is field called classification batch, check what is defined for that movement type.
Regards
Ravi Shankar.

Want to find out how a batch classification is used

Hello
I have previously sent out a message and the idea given was not very helpful.
Anyway, this is my question:
I have found a class and its characteristic which was setup in the system and I would like to know how this classification` is being use in the system.
For example, I would like to know which process (i.e. during goods receipt, during sales order creation, during production, during warehouse) is using this classification to perform their transaction.
Do you know how to find out this kind of information in the SAP system?
Thanks
Tuff

Do you want to know how the batch classification is used in general in SAP or how it is used in the system where you found it?
In the latter case make an interview with the users, any process that has to do with stock can make use of the batch classification
In general is classification exact what the word "classification" means. You describe something in more detail in an organized way. Classification is a modification free way to add own "fields" to standard objects, the user can immediately search in classification without an extra effort to develop a search help.
The batch classification can be used in a batch determination to to enable SAP to automatically search for batches with certain characteristics.and assign them to documents like sales order, delivery, goods movements, transfer orders, and production/process orders.

Delivery (VL02n) - What table contains the Batch Item details?

Hi,
I have a question in regards to Deliveries (VL01n/02n/03n).
Right now, I have a delivery that has 1 Item (Item 10) and a batch split
under it (Batch SPlit is item 900001).
From which table can I get the batch item details (what material it is for and etc).
Table LIPS only contains the Delivery Item details and does not contain the
Batch/Batch Split item details.
Please help.
Thanks,
John

hi check these tables..
VBFA Document flow (alg.)
VTFA Flow shipping documents
6.1 Sales order :
VBAK Header data
VBAP Item data
VBPA Partners in sales order
VBKD Sales district data
VBEP Data related to line items, delivery lines
6.2 Billing document :
VBRK header data
VBRP Item data
6.3 Shipping :
VTTK Shipment header
VTTP Shipment item
VTTS Stage in transport
VTSP Stage in transport per shipment item
VTPA Shipment partners
VEKP Handling Unit - Header Table
VEPO Packing: Handling Unit Item (Contents)
6.4 Delivery :
LIKP Delivery header
LIPS Delivery item
6.5 Pricing :
KONH Conditions header
KONP Conditions items
KONV Procedure ( billing doc or sales order)
KOND
6.6 contracts :
VEDA Contract data
regards,
venkat

Batch Classification Screen for Goods Movements

SAP Gurus,
Very recently (24. April), we experience the following issue: (PP-PI Process Order)
At the moment of process order confirmation, for any new batch assigned in the good movement overview, there's no pop-up of batch classification screen which allow our user to entry the classification data. And this functionality works fine in the past.
Do you have an idea that how it happens? We checked the configuration OMCV and master data as well, the settings are all fine to me.
Best regards,
Vincent

Dear Vincent,
I think you talk about the 101 movement, don't you? In this case this is not possible at all, check SAP note 85310
Because goods movements can be decoupled from confirmations and
processed in background, it was decided that this functionality would
not be implemented; therefore this is Standard R/3.
Solution
As a work around for this you have the following options:
1. Classify your batch manually through Batch Master Maintenance.
2. Turn off automatic goods receipt and classify your batch through the
    pop-up that is presented during MM goods receipt.
3. Do not create your batch during Order Processing. Instead have the
    system create it during confirmation and at this time you will be
    able to classify your new batch from the Goods Movement screen
    COMPONENT>BATCH MANAGEMENT>CREATE BATCH.
Note :
If you want that your batch is classified in the background you can set
in the transaction OMCV (classify batches within goods movement
overview) that the classification is to happen in the background. You
can then utilise the user exit EXIT_SAPMM07M_004 to valuate the
characteristics if it is valid for
your release.
Regards,
Sabine

Batch Number Details Import Issue

Dear Expert
I crated User defined field to Batch Details field
My All Items are Batch Number wise
NOw i want to import data fronm Excel to create Backdated Purchase Bill ,So i use
1)Document Level Template
2) Document Line Template
3) BTNT-BatchNubers1 Template
When i create CSV sheet for Batch number I add user defined field also
& when i import through DTW & select the Batch Number Template & Go to the Mapping Rule for User defined field it can't see in Target Field
So how i import Batch Number details for Userdefiend field
SAP 8.82 PL 06

Hi
Check the below link it may helps you
How to create a template for a User-Defined Table in Data Transfer Workbench? - Business One - SCN Wiki
With Regards
Balaji Sampath

Batch classification details -mass check -reg

Similar Messages

Maybe you are looking for