Batch Classification for Finished Goods

Hi,
Can anybody explain me the significance of maintaining batch classification data for a finished material?
Currently we have batch management active for all the finished materials but for some materials we have not maintained the classification data.
When I checked the batch data in MMBE it shows me the Production date & Shelf life expiration date based on the values maintained in the material master.
The class type is maintained at the plant level as 022 with characteristics as Last Goods Receipt & Shelf Life Expiration date.
I want to know what impact will be on the distribution of these materials if I do not maintain the classification data?
Thanks & Regards,
Abhijit

Hi Ravi & Lakshman,
Thanks a lot for the response. I understand what batch classification is & how it is implemented to use in coordination with Batch Determination. What I would like to know is what if the batch search strategy & class type (022) is defined at the plant level and  batch management for a finished material is active but classification data is not maintained. GR (101) for this finished material is possible but does this mean that not having classification data will not have any impact on the goods movement of this material?
In case of production when the classification data is not maintained for a back flushed material (raw / semifinish), after the process order confirmation the 261 movements end up in COGI with reason Enter Batch. Since the selection criteria fails due to the unavailability of classification data; the batch needs to be selected manually instead of the system picking up the correct batch automatically.
Like in inventory (consumption of raw & semifinish) do we have batch determination & search strategy for distribution where the finished stock will be picked up for the sales orders based on the selection criteria & sorting rule?
Thanks & regards,
Abhijit
Edited by: Abhijeet K. Nerurkar on Feb 14, 2011 2:18 AM

Similar Messages

  • Assgn of batch nos. for finished goods

    Dear,
    GURUS!!!!
    I am working on make to order scenario.I am using batch management here.
    I am activate the batch management configuration guide.
    What is the next process for batch activation ?
    Is this system take internal batch no directly.?
    What is the process for finished goods batch no?
    Please coordinate me .
    Thanks with Regards,
    Nitin

    HI
    Kindly check the following link for more information:
    http://help.sap.com/saphelp_47x200/helpdata/en/25/2838bf4f7811d18a150000e816ae6e/frameset.htm
    thanks

  • Validation of batch nos. in migo for finished goods (fert)

    I want to validate batch number entered by user at the time of migo for finished goods (fert) against the batchs in mcha. how can i do this? also is it possible to give f4 help to user for available bach nos. for the particular material ?

    Hi,
    Cannot you use message M7 668 for this purpose?
    Problem is "batch has been already posted in stock"
    Regards,
    Csaba

  • PO for Finished Goods with Tax Code - Inventorise

    Hi All,
    Our Client is procuring Finished Goods from Domestic Vendor & Excise Duty is paid to the Vendor for that i am defining the tax code in PO. Over here For the Finished Good in Tax Code it is not capturing - (Condition Type - JMO2). I have checked it in PO for ROH, HALB tax code is working perfectly with (Condition Type - JMO2). I like to know will it work for finished goods or not. In J1ID i have maintained Excise Rate.
    I had followed the following steps.
    1) Material code- Chapter id maintained in J1ID
    2) Vendor code excisable in J1ID
    3) Maintain condition record in FV11 for the correct validity period
    4) Check the PO creation date whcih should fall between condition record validity period
    Every thing is maintained i have checked it Thoroughly fot this particular material i am not getting it. This one is a finished goods material.
    I am not able to identify what is happening.
    I will give the flow so that you can help me out.
    1. Created Material - Finished with all views except - Classification, Forecasting,
    Work Scheduling & QM
    2. Create Info Record - Tax Code given
    3. J1ID - Chapter ID, Chap ID with Material, *** Val for Mat, Vendor Excise Detail, Excise ind. for Plant, Excise ind. for Plant & Vendor, & Excise Tax Rate.
    4. FV11 - Maintained till - 31.12.9999.
    5. FTXP - Tax Code is Maintained & it's working fine with other PO.
    6. ME21N - PO is done for Domestic vendor with Standard PO With no condition & With only tax code for ED & CST.
    7. In J1ID cenvat determination has been maintained.
    Also the material type should be raw in material chapter id combination instead of RG1 even though the material is finished to take credit of excise it should be maintained as RAW .
    Over Here if i see i am not able to capture (JMO2 A/P Eduty for Inven 0.000%) &
    For Sale tax i have maintained it in FTXP as (A/P C Sales Tax Inv  NVV   12.500%  JIP1) but it is not appering in PO Tax code. I can See the sale tax is geting updated in Tax code for Inventorise if i give it with out ED in tax code. With ED it is not Appering in Taxcode.
    Can you help me resolving the issue.
    Once again thanks for youre help.
    Thanks in Advance,
    sapuser.
    Edited by: sapuser on Dec 26, 2008 10:10 AM

    Hi All,
    Just give a check by entering cenvat determination table. System checks this by default for excise details. Enter i/p and o/p material as same.
    Hope this will resolve you Problem,
    Pherasath

  • Uploading Production Requirements For Finished Goods From External System To Run MRP For Components in SAP.

    Hello Production Planning experts,
    I'm looking to solve the current business problem:
    The company bought a third party software (JD Edwards) to calculate production requirements instead of using SAP's standard Production Planning or a tool like SAP's APO. They run a batch job to query Sales Orders, Deliveries, available stock, stock in transit, etc. from sap and feed/upload it to the third party software so it can calculate the Finished Goods Production Requirements for them. They love the third party software, so replacing it is not an option. Since the third party software is already taking into account Sales Orders, Deliveries, available stock, stock in transit, etc. from SAP, it just outputs a "Finished Goods Production Schedule" by week.
    My questions are:
    1) What's the best way to upload something like that in SAP in the form of Planned Orders or something of that nature?
    After i get that schedule in SAP:
    2) Is there any way to calculate components' requirements for that "Finished Goods Production Schedule" alone? The company would like to IGNORE existing stock AND expected-goods-issues in the future (sales orders, deliveries, etc) for Finished Goods ONLY. The components calculations would work the standard MRP way, taking into account existing stock and AND expected-goods-issues in the future (sales orders, deliveries, etc)
    I started looking into Master Production Schedule (MPS), but I don't know if that's the right approach since I'm not very familiar with it.
    Thanks in Advance! I will gladly reward points for helpful/correct answers.

    Hello Oscar
    I suggest you to upload your production plan in the for of "Planned Independent Requirements" using BAPI BAPI_REQUIREMENTS_CREATE. Later, MRP will create planned orders to cover the PIRs.
    If you don't want to consider the existing stock of the finished product, you should use the planning strategy 11 to create your PIRs. Take a look on the following link for more details about this planning strategy:
    Gross Requirements Planning (11) - Demand Management (PP-MP-DEM) - SAP Library
    Here you will find the following information:
    The make-to-stock strategy gross requirements planning is particularly useful in mass production environments; it is often combined with repetitive manufacturing. This strategy is particularly useful if you need to produce, regardless of whether you have stock or not. For instance, steel or cement producers might want to use this strategy because they cannot shut down production; a blast furnace or a cement factory must continue to produce, even if this means having to produce to stock.
    This strategy is also frequently used if there is a Material Requirements Planning system in a legacy system that needs to be linked to an SAP system which serves as a production execution system. The legacy system calculates a specific production plan, which has to be executed, regardless of the stock situation in the SAP system
    It looks like this planning strategy is exactly what you are looking for.
    BR
    Caetano

  • Batch classification details in Goods receipt

    Hi ,
    In my business for some of the materials i have activated the batch management and the batch classification details in the material master record.
    For those materials if i am doing the goods receipt system is allowing to post the document if the batch characterstics are not entered. I have to restrict if the batch characterstics are not allowed it should not able to post.
    I have made a message setting LB045 active with'E'. then also it is allowing.
    Is there any other message settings to be configuered.

    If the classification tab can be accessed in MIGO is depending on your customizing IMG > Logistics - General > Batch Management > Batch Valuation > Valuation for Goods Movement in Inventory Management > Activate Batch Classification for Goods Movements in IM
    there you have 5 options:
    ' ' No branching to batch classification
    1 Classification carried out in background (all batches)
    2 Classification only in foregr.for mand.charac. (all batches)
    3 Classification always in foreground (all batches)
    4 Classification in foreground for new batches only
    how did you setup it in your system?
    from OSS note 519303 - FAQ: Goods movement with Transaction MIGO:
    3. Question:
    How does the batch classification work in Transaction MIGO?
    Answer:
    When you post or check a goods movement, the system carries out the classification in the background. If you want to process the batch classification online, use the 'Classification' pushbutton. You can find this pushbutton on the 'Batch' tab page in the detail data of the item.
    You cannot automatically go from Transaction MIGO to the batch classification dialog. You can use the adjustable system message (Transaction OCHS) LB 045 to ensure that the complete classification data is entered.

  • PO for Finished Goods with Tax Code

    Hi All,
       Our Client is procuring Finished Goods from Domestic Vendor & Excise Duty is paid to the Vendor for that i am defining the tax code in PO. Over here For the Finished Good in Tax Code it is not capturing - (Condition Type - JMO1). I have checked it in PO for ROH, HALB tax code is working perfectly with (Condition Type - JMO1). I like to know will it work for finished goods or not. In J1ID i have maintained Excise Rate.
    Help me to resolve tis issue.
    Thanks in Advance,
    sapuser
    Edited by: sap user on Dec 18, 2008 4:04 PM

    Hi All,
    Every thing is maintained i have checked it Thoroughly fot this particular material i am not getting it. This one is a finished goods material.
    I am not able to identify what is happening.
    I will give the flow so that you can help me out.
    Created Material - Finished with all views except - Classification, Forecasting,
    Work Scheduling & QM
    Create Info Record  - Tax Code given
    J1ID - Chapter ID, Chap ID with Material, *** Val for Mat, Vendor Excise Detail, Excise ind. for Plant, Excise ind. for Plant & Vendor, & Excise Tax Rate.
    FV11 - Maintained till - 31.12.9999.
    FTXP - Tax Code is Maintained & it's working fine with other PO.
    ME21N - PO is done for Domestic vendor with Standard PO With no condition & With only tax code for ED & CST.
    Over Here if i see i am not able to capture (JMO1 - A/P Eduty for Setoff 0.000 %).
    Any other thing has to be taken care let me know.
    Help me out in Solving this issue.
    sapuser

  • Batch History of Finished goods Batch

    Hi Gurus,
    I need to find out the batch history of finished goods batch.
    I heard there is a standard function module used for this but unabe to get it.
    How can we find the history of a given batch of a material?

    Hi,
    In SAP documentation available its clearly mentioned steps to be performed for batch history.
    Also chech thread:
    http://scn.sap.com/thread/1354997
    Check documentation about Program RVBOBJTABUPD with google help. You will get idea.

  • If Excise invoice required for finished goods.

    Hi All
    I have doubt, whether excise invoice is required for finished goods or not. As I am trying to create MIGO doc for PO of finished material, and it is saying, no excise invoice possible for finished material RG1.
    Can you advise please.
    Regards
    Mukta

    HI
    Thanks for this. When we are executing Utilization transaction J2IU, it is giving dump after prompting popup with  'Data will be lost PLA NCCD B35', 'No record selected , excise invoice cancelled'.
    Run time error is saying -
    Short text
        Structure-type conflict when calling a FORM
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "J_1IRUTZ" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
    not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    The call of the FORM "DETERMINE_DEFAULT_VALUES" is incorrect:
    The actual parameter no. 2 is at PERFORM not compatible with the
    structure type requested by FORM "DETERMINE_DEFAULT_VALUES".
    The FORM "DETERMINE_DEFAULT_VALUES" is defined in program "SAPMJ1II".
    This error occurs in Unicode if the fragment view of the types is
    incompatible.
    Can some one suggest if we need to apply any OSS NOTE.
    Regards
    Mukta

  • How to get unit cost for finished goods in prod order

    HI all,
    IN a production order of type PP04, there is cost analysis you can get from CO03.  This shows the cost for finished goods and BOM components.  Would anyone know how the cost for finished goods are calculated ?  The issue i have is that the unit cost of the finished goods is not correct.  It is higher than what it should be.  I looked at the moving avg price at material master but the cost used in calculation is different than in material master.   Can anyone shed light how finished goods are calculated and why it is picking up a higher unit cost ?  Where is the higher cost coming from  for finished goods material as shown in CO03 ?  The BOM materials are picking unit cost correctly.  Would this have anything to do with cost settlement ?
    thank you.
    joyce

    Hi,
    Finished goods price will depend on BOM componenet price,  activity price and overhead price. Check whether this prices are picking correctly or not.
    Regards,
    Sreekanth

  • Discontinuity and Follow-up Materials for Finish Goods

    Dear all,
    We have used for a long time the Discontinuity functionality and Follow-up Materials for Raw and Packaging materials (components in BOMs).
    We would like to use the same functionalities for Finish Goods, but after setting fields in MRP4 View, it seems not to work as it did for components.
    Is it possible to reproduce the same effect in Finish Goods as we had with components, i.e., use some kind of Discontinuity and Follow-up materials for Finish Goods?
    We currently work with R/3 V.4.7.
    Thank you all in advance for any support.
    Best Regards,
    Alberto

    Dear Alberto,
    If my understanding is correct then this discontinued material concept works only for the components and not for the finished
    product during MRP.
    Discontinuation Data Use
    In MRP, the discontinuation functionality is used to transfer dependent requirements of a component to one or several follow-up
    materials, if the requirements are no longer covered by stock. You can also define a follow-up material in the bill of material.
    Check this link to explore more.
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/b1/c044d1439a11d189410000e829fbbd/frameset.htm
    Regards
    Mangalraj.S

  • Re: Automatic Reorder point Planning for Finished Goods

    Hi All,
    I have some doubts regrading the Automatic Reorder point Planning for Finished Goods.
    For testing purpose I have entered the consumption values for two month.
    Say :
    Nov-08=13
    Dec-08=20
    ROL level=5
    Safety stock =4
    Model =constant
    Now when I execute the forecasting,The system gives me the forcast for the next two month jan & Feb.
    But when I run the MRP I see planned order for 5.So how to fulfill my forecast for jan?
    Please Advice.
    Regards,
    Vivek

    Hi Brahamakar,
    Can you please help me.
    Regards
    Vivek

  • How can mass create batch classification for many material batches? ?

    Hi Experts,
    In our system , there are so many material batches which have not been classified，see by
    BMBC Tcode.
    That means these batches has no values in the batch class. I know we can create
    classification for these batches with MSC2N Tcode.
    But there are so many batches  which have not been classified,more then 2000.
    It is not possible to create classification for every batch with with MSC2N once a time.
    So how can I create batch classification for so many batches once a time?
    How can I mass create batch classification for so many batches??
    Thanks for any reply!

    Hi,
    Please be aware that SAP does not support the use of batch
    input in the classification system. SAP recommends you use BAPI's for
    example in your case BAPI BAPI_OBJCL_CREATE and BAPI_OBJCL_CHANGE
    would be able to help. For more information, please have a look at the
    note: 943559 - Point 2 and 13. Point 13 references the note 1083986.
    I hope this helps!.
    Best Regards,
    Arminda Jack

  • Plantwise Production & Sales report for Finished Goods

    Dear All,
                  Please let me know how to generate Plantwise Production & Sales report for Finished Goods. Is there any t code?
    Regards,
    Anil

    Dear All,
                         Thank you for the solutions. But can i draw the values in one single report. It will be more useful.
    Regards
    Anil

  • Moving average price for finished goods

    Hi All
    I am using moving average price for finished goods.  My question is, Does the price on the material master record adjusts, when we do goods receipt on a production order( If there are variances)?
    here is a scenario:
    Moving avrage price  of finished goods=2$ and total stock =1
    it has two components in the Bom
    Raw1-3$
    Raw2-3$
    Now when I am producing 1 qy of finished goods with 6 $ of Raw materials, moving average price of fert should  be 6+2/2=4 $. But I noticed the moving average price  in the material master record is not changing.
    My question is, Does the MVP changes with production order goods receipt, If so, what setting should I change to acheive that functionality.
    Thanks
    Steve

    Hi Guys
    Thanks for responding
    I am aware that sap does not recommend MAP for finished goods. But we have a weird requirement. And I am doing a demo on this. My thought on MAP is, It changes for every goods receipt. But when I am doing goods receipt on production order, It is not changing the MAP, Even though there is variance on production order. So, My question is, Did I miss any configuration ?

Maybe you are looking for