Batch-Classification - Mass Assignment
Hallo all,
I created a new Class for Batch-Classification.
Now a would assign this new Class to existing Batches in the System.
Unfortunately I didn't found any "MASS" transaction for this change.
Transaction MSC2N has only separatelly usage for it.
Transaction CLN24N can I use only for the material assignment (material master data - classification for batches).
The direct assignment (Material + Batch) I didn't find there.
I'm still looking for something easier then LSMW is.
My question: is any possibility for MASS assignment for existing batches in the system (except LSMW)?
I'm looking forward of your answers
Katie
Hi,
Thank you for your answer.
Transaction MSC5N could be O.K. for a users, I think, that better is BMBC, because there is the function MSC5N integrated.
But I need only assignment for classification fields (without value) to a batch for 100.000 items
For this action are MSC5N and BMBC useless, because I can assign the fields only manually for every item there.
Regards
Katie
Similar Messages
-
How can mass create batch classification for many material batches? ?
Hi Experts,
In our system , there are so many material batches which have not been classified,see by
BMBC Tcode.
That means these batches has no values in the batch class. I know we can create
classification for these batches with MSC2N Tcode.
But there are so many batches which have not been classified,more then 2000.
It is not possible to create classification for every batch with with MSC2N once a time.
So how can I create batch classification for so many batches once a time?
How can I mass create batch classification for so many batches??
Thanks for any reply!Hi,
Please be aware that SAP does not support the use of batch
input in the classification system. SAP recommends you use BAPI's for
example in your case BAPI BAPI_OBJCL_CREATE and BAPI_OBJCL_CHANGE
would be able to help. For more information, please have a look at the
note: 943559 - Point 2 and 13. Point 13 references the note 1083986.
I hope this helps!.
Best Regards,
Arminda Jack -
Batch classification details -mass check -reg
Hi ,
Requirement is as of now batch classification details of a material are checked through MSC3N , where material , plant etc.. are entered and executed .
here we can see for the list of materials one by one only .
is there any t code through which the details can be checked entering materials in multiple / entering material type
if not available in standard SAP , if an ABAP report to be made , please suggest the flow with tables and fields
inputs
material type
material
plant
batch
storage location
out put should be teh batch classification details
Is there any Tcode similar to MSC3N where multiple inputs can be given / details can be taken in mass not entering one by one
plDear,
Please check to table MCH1, AUSP, KSSK, KSML, KLAH
Use these FM.
CLAF_CLASSIFICATION_OF_OBJECTS
[Thread|Re: Get batch characteristic value]
Regards,
R.Brahmankar -
Automatic batch classification with procedure on goods receipt does not wor
Hi,
I have a material with batch classification.
The material has two characteristics.
One is a number called VALUE.
The other is also a number (called CONVERSION) and shall be deived from the first.
A procedure is created and assigned to the second characteristic.
$SET_DEFAULT ($SELF, CONVERSION , $SELF.VALUE / 6000)
When I post a goods receive (movement Type 501) the characteristics can be filled . The field VALUE is set with 12000.
I was expecting the characteristic CONVERSION to be calculated as '2' and filled by the procedure.
This is not the case.
If however, I try to fill it manually, the system accepts only the calculated value '2'. Otherwise an error is shown.
How can I force the system to calculate and fill the second characteristic when insserting a value in the first ?
Thanks for any help.Hi Marcus,
i have the same problem with movement type 101.
How did you solve this issue?
Can you help me.
Thank you.
CM -
Want to find out how a batch classification is used
Hello
I have previously sent out a message and the idea given was not very helpful.
Anyway, this is my question:
I have found a class and its characteristic which was setup in the system and I would like to know how this classification` is being use in the system.
For example, I would like to know which process (i.e. during goods receipt, during sales order creation, during production, during warehouse) is using this classification to perform their transaction.
Do you know how to find out this kind of information in the SAP system?
Thanks
TuffDo you want to know how the batch classification is used in general in SAP or how it is used in the system where you found it?
In the latter case make an interview with the users, any process that has to do with stock can make use of the batch classification
In general is classification exact what the word "classification" means. You describe something in more detail in an organized way. Classification is a modification free way to add own "fields" to standard objects, the user can immediately search in classification without an extra effort to develop a search help.
The batch classification can be used in a batch determination to to enable SAP to automatically search for batches with certain characteristics.and assign them to documents like sales order, delivery, goods movements, transfer orders, and production/process orders. -
Updating Batch classification data from MIGO for Purchase order
Hi,
I need to update batch classification data (in MSC3n) from MIGO for purchase order. The logic needed for this is as below,
1) Pass material and batch to MCH1 table to get CUOBJ_BM.
2) Pass CUOBJ_BM to INOB table to get INOB-OBJEK.
3) Pass INOB-OBJEK to CLAF_CLASSIFICATION_OF_OBJECTS to get class name & characteristic name.
4) Pass INOB-OBJEK, CLASS name and characteristic name to BAPI_OBJCL_CHANGE to update batch classification data.
I created implicit enhancement at the bottom of FM "CLVF_VB_INSERT_CLASSIFICATION". But the problem is, the return parameter of BAPI_OBJCL_CHANGE is giving the following error.
Class type 023, object type MCH1, object RAW-6 0000001151
Object is currently locked by user
The assignment was not changed
Please let me know how to do it. Is there any BADI or User Exit?Hi,
As you said the break point is not triggering did you activate your exit and activated even the project to which your exit is assigned.
I hope you missed activating your project in CMOD transaction. Please verify it once and if it is not activated then immediately activate it and try debugging again.
Regards,
Rafi -
Batch Classification Screen for Goods Movements
SAP Gurus,
Very recently (24. April), we experience the following issue: (PP-PI Process Order)
At the moment of process order confirmation, for any new batch assigned in the good movement overview, there's no pop-up of batch classification screen which allow our user to entry the classification data. And this functionality works fine in the past.
Do you have an idea that how it happens? We checked the configuration OMCV and master data as well, the settings are all fine to me.
Best regards,
VincentDear Vincent,
I think you talk about the 101 movement, don't you? In this case this is not possible at all, check SAP note 85310
Because goods movements can be decoupled from confirmations and
processed in background, it was decided that this functionality would
not be implemented; therefore this is Standard R/3.
Solution
As a work around for this you have the following options:
1. Classify your batch manually through Batch Master Maintenance.
2. Turn off automatic goods receipt and classify your batch through the
pop-up that is presented during MM goods receipt.
3. Do not create your batch during Order Processing. Instead have the
system create it during confirmation and at this time you will be
able to classify your new batch from the Goods Movement screen
COMPONENT>BATCH MANAGEMENT>CREATE BATCH.
Note :
If you want that your batch is classified in the background you can set
in the transaction OMCV (classify batches within goods movement
overview) that the classification is to happen in the background. You
can then utilise the user exit EXIT_SAPMM07M_004 to valuate the
characteristics if it is valid for
your release.
Regards,
Sabine -
User Exit for batch classification for tcode mb1c
HI experts,
I have implement customer exit MBCFC004 EXIT_SAPMM07M_004 and CLFM0002 EXIT_SAPLCLFM_002 to set a value for
a customize characteristics.
Now I have a issue.
MBCFC004 EXIT_SAPMM07M_004 can work with migo but when I with mb1c to do same transaction it didn't
work.
CLFM0002 EXIT_SAPLCLFM_002 only work when I input a value in the customize characteristics it can change the input value.
I have set extension in OMCV for my move type. and assigned the bath to material.
I have reference
Re: User Exit for batch classification
but I haven't found any question for my solution.
please help me.
thanks a lot.Class ZBATCH has status 1 (= 'Released') but the customizing of classtype 023 doesn't allow to classify with classes of this status. Settingsfor class status in class type 023 are different from what SAP delivers.Correct please these settings. You may lookup the correct definition of
the class status in class type 022. -
Update Batch Classification for a Material
Hello friends,
I'm facing the following problem : A specific BTCI wich simulates MB01 was calling another program called SAPLCTMS to update Batch classification for a Material, this program (SAPLCTMS ) seems to be not necessary after the support package Level 57 (we just installed SAP4.6C). I didn't find any note on OSS for this...
Now i'm trying to use this BAPI instead of BTCI for the Material batch classification :
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
objectkey = l_objnum
objecttable = 'MCH1'
classnum = 'ZGB_TIDCLASS'
classtype = '022'
status = '1'
keydate = sy-datum
TABLES
allocvaluesnumnew = t_valuesnum
allocvaluescharnew = t_valueschar
allocvaluescurrnew = t_valuescurr
return = t_return.
But its not working, it keeps asking for a batch number. I guess i'm not using the right FM ?
Any ideas about this ?
Thank you in advance for your help !
Best Regards.
Edited by: Soufiane FAYSSAL on Jun 18, 2009 11:42 AMHello,
I am Ashok Chelikani. I am working on the same Issue.
i am getting following message:
TYPE ID NUMBER MESSAGE
E |C1 |003 |Characteristic DIMENSIONSCOLOR not found or not valid
I |CL |736 |Assignment was not created
my procedure as follows:
CLEAR: lv_objnum.
lv_objnum = I_MSEG-MATNR.
**Get Object Details
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
objectkey = lv_objnum
objecttable = 'MARA'
classnum = 'Z_RMBCH1'
classtype = '001'
TABLES
allocvaluesnum = lt_alloc_num
allocvalueschar = lt_alloc_char
allocvaluescurr = lt_alloc_curr
return = lt_return.
IF NOT lt_return IS INITIAL.
CLEAR: lv_objnum.
lv_objnum(18) = I_MSEG-MATNR.
lv_objnum+18(10) = I_MSEG-CHARG.
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
objectkey = lV_objnum
objecttable = 'MCH1'
classnum = 'Z_RMBCH1'
classtype = '023'
tables
allocvaluesnumnew = lt_alloc_num
allocvaluescharnew = lt_alloc_char
allocvaluescurrnew = lt_alloc_curr
return = lt_return.
lt_return returing error message. Kindly help me. -
Assistance please,
I have Batch Determination Strategy created and it works great - once I manually assign Batch Class to each batch record. How can I get the system to automatically add the classification to the batch? Batches are created automatically upon Goods Receipt and I do not have batch status management active.
Your assistance is appreciated.you have to add the batch classification in your material master classification view.
of course this will not add the batch classification to existing batches, only to batches that are created after -
Dear All,
I'm trying to do the customising for MIGO where i have to maintain the batch characteristics. I've created a class with characteristics and assigned it to material. Then in OMJJ, in the detail of 101, I've marked the batch classification as '3'.
Then i did GR but no batch classification showed up as mandatory. Is this normal or is there any remaining customising ?
Best regards,Hi,
Make sure that you check the checkbox batch management in purchasing viw of material
Also assign the class you have created with asignment of characteriscs in classification view of the material and the do with PO and GR then you can see the tab batches.
Thanks. -
Mass Assign Material to Routing
Hi,
I have been trying to do Mass assignment of Material in routing through LSMW but it seems not working. I've done recording but when I'm trying to execute the batch input, only one material become assign to routing.
Can someone share his thoughts on how to do this?
Regards,
Ahmed RoubyHi Ramagiri.
Its Working but when go for second line its overwrite on the first line so only one material become assign to routing.
Regards,
Ahmed -
Copy of Material Master charac. values to the batch classif. in GR for PO
Dear gurus,
Could you please help me with the following issue. I have a material managed in batches, and it has a classification type 023 in material master. I fill one chaacteristic of this classification with some value. Now I want this value to be copied to the batch classification during the creation of new batch while making GR to production order.
Is it possible?Hi Nikolaj,
What I am understand your requirement is like,
You want to fetch the value of Characteristic maintain in Batch class in Material master to the Batches, correct?
But my Friend if you maintain value of characteristic in Batch Class in material master then it will works as a validation.
For Example,
Suppose your Characteristic is Colour and in Material Master Batch classification view you have maintain value as Red.Then system will not allow you any other colour in Batches.You will find that value in Drop Down list.
Regards,
Dhaval -
Different Batch Classification at storage location level
Dear guru ,
I have tested that i can insert different values of batch classification for the same material and the
same batch number but in different plants.
In MSC1N/MSC2N transaction the system allow a insertion at storage location level.
Itu2019s possible to insert different values of batch classification for the same material , same batch number and the same plant but in different storage locations ?
Thanks.hi,
check in OMCT under which batch level the current system is, if the level is set to be material level or client level, if you make a change to the batch classificaiton, it will reflect in all the plants across the clients.
Batch classification is not maintained at the storage location level. -
Batch Classification Values not getting changed
Hi Gurus,
I am using the following bapi ( BAPI_OBJCL_CHANGE ) to change Batch classification values Eg: Cut clarity etc.
when i pass these values thru the function module in the program it is not getting changed while when i change it through msc2n it gets changed successfully...
I have passed the following values in the parameters of the bapi :
OBJECTKEY = v_objectkey
OBJECTTABLE = 'MCH1'
CLASSNUM = V_CLASSNUM
CLASSTYPE = '023'
KEYDATE = 30.04.2010
ALLOCVALUESCHARNEW
CHARACT = CLARITY
VALUE_CHAR = P040
VALUE_NEW = P040.
Can some one help me solve this....
Needed urgently..
Edited by: NAVIN FERNANDES on Apr 30, 2010 12:31 PM
Edited by: NAVIN FERNANDES on Apr 30, 2010 12:32 PMHi Jacky,
I am posting the code here.. Do let me know if u have ne queries:
REPORT ZNAVBATCH.
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: P_MATNR TYPE MATNR,
P_CHARG TYPE CHARG_D,
P_WERKS TYPE WERKS_D,
P_LGORT TYPE LGORT_D.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
DATA: WA_BATCH TYPE BAPI1003_OBJECT_KEYS,
WA_ALLOCCHAR TYPE BAPI1003_ALLOC_VALUES_CHAR,
WA_ALLOCVAL TYPE BAPI1003_ALLOC_VALUES_NUM,
INT_BATCH TYPE STANDARD TABLE OF BAPI1003_OBJECT_KEYS,
INT_RET1 TYPE STANDARD TABLE OF BAPIRET2,
INT_RET2 TYPE STANDARD TABLE OF BAPIRET2,
INT_RET3 TYPE STANDARD TABLE OF BAPIRET2,
LV_KEY TYPE BAPI1003_KEY-OBJECT,
INT_ALLOCVAL TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_NUM,
INT_ALLOCCHAR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CHAR,
INT_ALLOCCURR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CURR.
WA_BATCH-KEY_FIELD = 'MATNR'.
WA_BATCH-VALUE_INT = P_MATNR.
APPEND WA_BATCH TO INT_BATCH.
WA_BATCH-KEY_FIELD = 'CHARG'.
WA_BATCH-VALUE_INT = P_CHARG.
APPEND WA_BATCH TO INT_BATCH.
CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
EXPORTING
OBJECTTABLE = 'MCH1'
IMPORTING
OBJECTKEY_CONC = LV_KEY
TABLES
OBJECTKEYTABLE = INT_BATCH
RETURN = INT_RET1.
IF SY-SUBRC = 0.
WRITE: 'SUCCESSFUL'.
CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
EXPORTING
OBJECTKEY = LV_KEY
OBJECTTABLE = 'MCH1'
CLASSNUM = 'ZTBATCHCHR'
CLASSTYPE = '023'
KEYDATE = SY-DATUM
UNVALUATED_CHARS = ' '
LANGUAGE = SY-LANGU
IMPORTING
STATUS =
STANDARDCLASS =
TABLES
ALLOCVALUESNUM = INT_ALLOCVAL
ALLOCVALUESCHAR = INT_ALLOCCHAR
ALLOCVALUESCURR = INT_ALLOCCURR
RETURN = INT_RET2
IF SY-SUBRC = 0.
WRITE : 'SUCCESSFUL'.
READ TABLE INT_ALLOCCHAR INTO WA_ALLOCCHAR WITH KEY CHARACT = 'CLARITY'.
IF SY-SUBRC = 0.
WA_ALLOCCHAR-VALUE_CHAR = 'C02'.
WA_ALLOCCHAR-VALUE_NEUTRAL = 'C02'.
MODIFY INT_ALLOCCHAR FROM WA_ALLOCCHAR INDEX SY-TABIX TRANSPORTING VALUE_CHAR VALUE_NEUTRAL.
ENDIF.
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
OBJECTKEY = LV_KEY
OBJECTTABLE = 'MCH1'
CLASSNUM = 'ZTBATCHCHR'
CLASSTYPE = '023'
STATUS = '1'
STANDARDCLASS =
CHANGENUMBER =
KEYDATE = SY-DATUM
NO_DEFAULT_VALUES = ' '
IMPORTING
CLASSIF_STATUS =
TABLES
ALLOCVALUESNUMNEW = INT_ALLOCVAL
ALLOCVALUESCHARNEW = INT_ALLOCCHAR
ALLOCVALUESCURRNEW = INT_ALLOCCURR
RETURN = INT_RET3
IF SY-SUBRC = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN =
IF SY-SUBRC = 0.
WRITE: 'SUCCESSFUL'.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
Maybe you are looking for
-
Time Machine Backup Is Too Large For Backup Disc NOT
Hi, I have not been able to locate anything to help me with a time machine/time capsule issue I am experiencing. I have a 750 GB internal and a 1tb capsule. I have been using it to back up for well over a year with no real troubles. About three month
-
Font problem while printing russian characters
Hello, I have a weird problem. When I print an exported crystal report document which has been exported by Crystal Reports for Eclipse 2.0 as PDF document, the printout misses a lot of russian characters. This area with the missing characters just st
-
Need help about PDF conversion
I have red words in a text box using publisher. How come the text show up as black after PDF conversion in Adobe?
-
I have the newest version of Adobe Air installed. Upon double clicking on my software application, the Air "terms and conditions" box appears. I hit "accept" but at this point nothing happens - my software does not open as it should. Does anybody hav
-
Iscsi for Solaris 10 - light is green
Yo, Have it running on x86 nv_10 package of Software Express 04/05. Target is SANRAD V-Switch 3000. By the way it also works fine from Solaris 10 virtual machine on VMWare Workstation. Solaris system disk is connected to the workstation by iSCSI and