Batch convert clips cut with razor instead of in and out points. How?

I cut a lot of clips on a big file with the razor instead of marking in and out points and now I want to batch convert. How?
Adobe CS5.5

Hi AK,
AngusKirk wrote:
I cut a lot of clips on a big file with the razor instead of marking in and out points and now I want to batch convert. How?
Adobe CS5.5
You can do that in Premiere Pro CC, but not before. Drag the clips from the Timeline to a bin and then export.
Thanks,
Kevin

Similar Messages

  • Freeze up during clip capture with random change of in and out points

    Having BIG problems capturing DV footage which began late last Fall. While performing a capture (assigned clips) footage would go down for a few seconds then would freeze (picture only, the audio continued) then after several seconds the picture would "catch up" and continue.
    Found a solution here in the FCP forum where I had my firewire drives "ignored" by SPOTLIGHT by listing them in the privacy selection. Worked and moved on.
    I have a project now where the problem has come up again. Once again during a clip capture it did what it did before - but now it ignores the assigned in point (audio but no video and almost consistently delaying it by 9 seconds into the capture) then freezes (at the assigned outpoint - sometimes) then continues to play on (audio only) then resumes (again catching up) then stops announcing a SUCCESSFUL CAPTURE. When the clip is selected to preview it plays back from the incorrect in point, freezes, then plays until the catch up - with now the audio out of sync. More craziness because now the log information now has changed: the MEDIA START & END information is not what was inputed so the DURATION TIME is now different and sometimes it adds a MARK OUT point (!?). I rarely use the CAPTURE NOW function but even trying that the footage still freezes up and goes out of sync.
    I worked the SPOTLIGHT routine again with no change. Have completely optimized my system drive and external hard drives using DISKWARRIOR 4.1
    I accept all the auto software up dates that come through UPDATER and see that I received a updated Quicktime version 7.5 on 13 June 08. I also noticed that I don't have CLASSIC OS 9 supported and seemed to have read here about something about FIREWIRE DRIVERS that maybe missing?
    Was thinking of upgrading to 10.5 to see if that helps - but unsure about my FCP version/compatability...
    So, here I sit frustrated since I have used FCP (which I LOVE) for quite a few years with great success - this is crazy! OF course, I have a project which deadline is looming!
    Any ideas?
    Much appreciation..
    Here's my computer stats:
    G4 Powerbook
    OS 10.4.11
    FCP 5.0.4
    QT 7.5
    Sony DSR-11 recorder/player
    4-Firewire Drives with 20gigs of space available

    So far have done a workaround to digitize my DV elements through iMovie. Not pretty. I string together the selected/import clips (in this case from interviews), assemble them in sequential order on the time line with small breaks of black in between, then export the timeline as DVCPRO/DV-NTSC quicktime file. Take that file into my FCP then segment out the clips on the time line, make each segment an independent clip so that I can name them. Not pretty but it works - miss having the logging data going through FCP log and capture.
    Still waiting for any other solution to my situation - thanks!
    John

  • How do I convert raw images with side car to Dng and

    How do I convert raw images with side car to Dng and preserve the sidecar info in the DNG?
    I have tons of raws + xmp sidecars that i want to convert to dng, because the raws are from different camera brands and i want to get everything simplified. so that i do not have to worry if I will be able to access the raws in the future, if I decide I want to rework some of the files.
    T.I.A.

    If the images are already in your catalog you can select them then choose Convert Photos to DNG from the Library menu. You'll be given the option of deleting the original raw files. Either way, Lr will only display the newly created DNG files.
    The alternative, which is better suited to images not already in the catalog is to use the Adobe DNG Converter

  • Batch Capture Randomly Changes In and Out Points

    I'm editing a documentary on Final Cut Pro 5.0.
    Using a SONY DSR-11 firewire deck.
    I logged sets of clips and then batch captured them. I DIDN'T select add handles in the batch capture tool. Some clips, as they're captured, change their in and out points. Sometimes by two frames early, sometimes by two frames late, and sometimes not at all. Several clips even stopped captured with an out point twenty seconds earlier than what I'd logged. The result is that I have clips with media start and media end points that are not in what I wanted. There seems to be no rhyme or reason whatsoever to this.
    Any ideas what's going on?
    Many Thanks if you do!
    Micah
    G4   Mac OS X (10.4.6)   Dual 1.25 Processors

    Check to see if your tapes have NDF time code.
    If you play a tape with NDF TC using Log & Capture, the current time display will defaut to DF until the tape palys forward long enough for the current time field to update. It is posible to log NDF tapes as DF, in which case the timecode values can be incorrectly re-converted if recapturing.
    Also, If you initiate a batch capture from the browser, FCP will default to DF, and not be able to update the TC format to NDF duriing the batch. The workaround here has been to cue up NDF tapes with L&C, and start the batch capture while L&C is still open and showing NDF TC.
    However, upon upgrading to FCP5 last year, I found that even observing all these precautions and steps, FCP would still shorten the out point of my captured clips on NDF tapes. I was capturing a feature film that came from the UK, and so the starting time on the master was 10 hours instead of 1 hour. When the DF/NDF error occurred and shortened the out point of my 2-hour clip, it did it by several minutes instead of several seconds, because of the starting TC on the tape. In that case, I wound up adding several minutes to my out point and recapturing the end over again.
    I haven't experienced this issue lately, but it comes up every now and then.

  • Clips shift in and out points after render (Dissolves messed up too) Urgent

    Hello all, I have a frustrating and urgent problem.
    I'm working with DV NTSC footage at 23.98 fps, shot 24pA and captured with the advanced pulldown removal from a dvx100.
    The problem arises when I am rendering my footage from a color correction, etc, the in and out points of my shots change and the shot seems to shift. The cut points don't change, but the shot shifts position within them, almost as if rendering has caused final cut to use the slip tool on these and move them ever so slightly forward or backward.
    This problem is also effecting my dissolves, causing them to start to dissolve then suddenly jerk into another part of the clip and then back to the shot that it is transitioning to.
    I have tried outputting a QT movie of my timeline (in order to color correct that instead and avoid a render), but as you may have guessed, this only results in a QT movie with all of the above problems.
    It is very similar, if not the same, as the problem described here: http://discussions.apple.com/thread.jspa?messageID=8096178&#8096178
    I'm under a deadline and any help would be very much appreciated.
    Thanks all,
    Nathan

    I've had that happen before. Crazy as it sounds, I "solved" it by laying a large video file over the top of the timeline (covering everything) then brought the opacity down to 0%. Go figure but it worked; everything straightened out and rendered fine.
    Ghost in the machine for sure.

  • Cannot delete clips in timeline using in and out points

    Can't delete or trim clips clips in the timeline when I use the in and out points. Can't figure out this flaw. Its as if final cut does not recognize the ine in and out points. I 've been using the razor to make edits, but when a come across a flash frames and need in and out points to delete the flashframe, I'm in trouble.
    Thanks

    Hi -
    You are missing a step.
    Set the in and out points on the section you want to delete:
    Then type Option-A to select the area within the In and Out Point:
    Then press the small delete key or Shift+ Regular Delete Key and it will delete the section you've designated with an In and Out and pull up the rest of the edit:
    MtD

  • No mark in and out points at batch capturing

    I have created logged clips to my browser window but, noticed that the IN and OUT points say NOT SET.
    Is this normal?
    As I create the logged clips for batch capture shouldnt I see the IN and OUT times?

    That's normal. When you set In and Out in the Log & Capture window, those points become Media Start and Media End in the Browser. And In and Out are left as Not Set.
    The rationale is that once you've captured, you'll review your clips and place In and Out points more precisely. In case you do want to stick with Media Start and Media End as your In and Out, simply load the clip into the viewer and press X on your keyboard - that will set your In and Out (at Media Start & End) for your clip.
    Now - you know there had to be one caveat - the only time this is not the case is when you check the box to Add Handles in the Batch Capture dialog. In that case, when FCP captures the clips, it extends the Media Start and Media End by the handle amount and uses the In and Out that you specified during logging as the In & Out for that clip in the Browser.

  • I just got my mac book pro and i was  wondering if i could get ichat instead of messages and if so, how can i get it?

    i just got my mac book pro and i was  wondering if i could get ichat instead of messages and if so, how can i get it?

    Welcome to the Apple Support Communities
    Messages can't be uninstalled to use iChat. Messages is the same as iChat but with iMessage support. See > http://support.apple.com/kb/HT5395

  • Has anyone else noticed issue with in and out points of Ratings?

    Hi,
    I have noticed that for some clips, the end point of a rating (i.e. Rejected) is the same as the in point of another rating (e.g. Favourite).
    How can this be? Is FCPX treating the out point as the frame after the selected section of a clip, rather than the last frame of the selected section?
    This may relate to another post I have made on in and out points, but was a slightly different issue:
    https://discussions.apple.com/message/17142309#17142309

    I agree with your assessment, but really Apply should change this so that the end point of a rating is inclusive (i.e. the end point of the REJECTED rating above should be 00:03:09:14 not 00:03:09:15).
    Another bug to report to Apple!

  • Color is changing the clips in and out points

    I tried to import into color a fcp7 sequence.  The original footage are quicktime clips.
    When the project opens in color, the in and out points of the clips are not there and it gives me the beginning of the clip.
    With other footage that I ingested in FCP I don't have a problem.
    Can someone explain this to me.
    Thanks

    >The original footage are quicktime clips.
    What FORMAT of Quicktime?  Because QT is just a container that can be one of a dozen codecs.  Color ony works with certain codecs, like ProRes, HDV, XDCAM, DVCPRO HD.  If the codec is anything but those...it will have serious problems.

  • New problem/bug when I set in and out points on a clip. Unwanted automatic zoom in on clip timeline.

    Playing clips to log and set in and out points for scenes I will use later.  Something changed with the new update and I think it is a bug.  When I hit the I and O keys to set in and out points on a clip before dragging to the sequence, it zooms in on the clip timeline.  I cannot see the full clip time line unless I zoom out which is a pain to do time and time again.  How do I get it back to the way it was before?  It did not used to zoom in and out, it just marked your in and out point as it played leaving the clip timeline unchanged.
    I am using windows 7 with Premiere Pro CC

    Hi,
    Thanks for your post. I think you are using Premiere pro CS6 as the Project option is included in the file menu and in the video there is an option of project available and visible. Please update your CS6 with the latest 6.0.5 update and the issue will be fixed. The link is provided below. Please update once issue is fixed.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5631
    Regards,
    Vinay

  • Cannot delete clips when using in and out points

    Hi
    I Cannot trim or delete clips in final cut when I'm using the in and out points. Nothing happens and the clips stays the same.
    any suggestions?

    Duplicate post: http://discussions.apple.com/thread.jspa?threadID=2758328&tstart=0

  • Help with in and out points not synced to footage correct

    When trying to insert a clip from the source material into the sequence timeline, using insert/overwrite function , dragging in the clip etc. any of the methods to bring the clip in from a given In and out point. Certain clips are failing and coming in as different in and out points. So the footage or clip/sublip in the source material comes in with the same lenght but the program is selecting a random different portion of the scene to put into the sequence. Please help. We are on deadline for a project :(. If anyone knows whats going on please help.

    It sounds like you're running into a known issue with subclips from merged clips, which the engineering team is working on.
    Unfortunately, there's no way to fix the subclips. Rather than making subclips, you could try one of the following:
    Duplicate the merged clip in the Project panel and set the desired In/Out range for each instance. For all intents and purposes, this is the same as creating a subclip--at least a "soft" subclip, which is what you get when you deselect the option to Restrict Trims to Subclip Boundaries. Admittedly the workflow is not quite as efficient, but the results are the same.
    If it's not essential to save subclips to the project, then simply load the merged clip in the Source Monitor, use In/Out points to define a segment, and insert the segment into your sequence, then repeat for the next segment of interest.

  • Can clips retain last playhead position and in and out points like v7?

    Is there a setting that will enable the clips to retain the last playhead position and in and out points so that I don't have to find the place I left off at every time I go to that Clip? Basically how FCP 7 worked.
    Vince

    This is another area that's lacking in this great application, I'm afraid - but there are ways to keep the 'in and out' points at least.
    When you have marked them you simply press 'F' to mark your selection as a favourite. Then if you click the green bar that appears, your selection will immediately be highlighted.
    Alternatively, add keywords to your selection - then when you click the keyword collection in the event browser, the clips will be displayed, already trimmed.
    A third way is to trim away the unwnated footage in your clip. Lets say you have a long clip and you want to make multiple clips from it. You don't want the first three seconds of the clip and you also don't want the last one second . . . (follow this carefully - it works)!
    Move the playhead to your IN point and press the 'O' key (yes the 'O' key).
    Now press the backspace key and your clip is trimmed to the 'in' point. Now scroll to the out point and press the 'I' key (that's right). Move the playhead to the 'in' point of your next clip and press 'O'.
    Press Backspace and your clip stands on its own for all time.
    (You can even mark one frame 'Out' and the very next frame 'In' and this will work - you don't lose any frames).
    Sorry I can't help you with retaining the playhead position.
    Andy

  • Why am I not able to mark "in" and "out" points in Final Cut Pro 6?

    I have a bunch of old tapes that I am trying to put on my computer.  I have Final Cut Pro 6 and everything hooks up nicely except I am not able to mark in and out points or use capture now.  Does anyone out there know why that would be the case?
    I appreciate any help I can get.

    What VTR? How is it controlled?
    What are your capture settings? Firewire Protocol?
    x

Maybe you are looking for