Batch Creation Date as a Virtual Characteristic in 0IC_C03 Inventory Cube

Dear Experts
Currently we have a Stock Aging report based on Document date. But our management requirement is Batch date wise.
Currently I am having Batch Creation date as an Attribute of 0Material info Object.
Is it possible to create a Virtual Characteristic for Batch Date and Include in the Cube?
If Possible please explain me the Procedure to Create Characteristic.
Thanks in Advance.
Viru
Edited by: Lankem-IT on Apr 15, 2011 3:43 PM

Refer link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f15839-0cf1-2b10-c6a7-ebe68cc87cdc?QuickLink=index&overridelayout=true
& check ur e-mail.

Similar Messages

Batch creation date

HI,
Does anyone know the table for batch creation date, i have been searching for many hours, i need this to create a new batch search strategy for creation date rather than reciept date.
Or is it possible to set up a serach strategy using batch number?
Thanks
Frankie

Hello
Table MCH1
ERSDA - date of creation
Also MCHA

Any standard transaction code to check Batch Creation Date of a batch?

Please let me know if you know any transaction to check batch creation date of a batch , preferably with valuation information.

Hi
You can try with MB5B. It wont give batch creation date, but it will give posting date (most of the cases posting date may be batch creation date)
Otherwise you can try to pull the information at table level MCHA-ERSDA and develop query.
regards
Srinivas

Change Batch creation date in MCH1

Hi all,
I have one requirement from our users.
They want to change the batch creation date in mch1 table.
Is it advisable to do that?
Please give your suggestions.
Regards,
sunny

Hi
Check with Transaction code MBC2.
Regards
Srilaxmi

Report for Inventory batch creation date

Hi experts,
Is there a report in SAP that shows inventory batch creation date? We want the actual creation date NOT when the batch was input into SAP. For example, we went live on 4/1/2010 with SAP but there are inventory batch created prior to that date. We want the creation date NOT the 4/1/2010 of data conversion date.
Regards
Rajneesh Gulati

Hi Rajneesh,
Check these tables which are relevant for batch management.
MCHA
MCH1
MCHB
Regards
Ram

Step by Step Loading data to ( 0IC_C03) inventory cube

Hi Guys ,
We are loading data to inventory cube today ( 0IC_C03) .Can you please let me know the steps to load the data .I have some documents but every document is having a different procedure .
Regards
Santosh

Hi,
http://wiki.sdn.sap.com/wiki/display/BI/StepbyStepLoadingDatatoInventory+Cube
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?QuickLink=index&overridelayout=true
Thanks
BVR

Batch creation Date of Manuf and Shelf life issue

Hello,
I am having issues when batch gets created during Process order Creation/Confirmation.
The issue is when the Batch gets created on creation/confirmation(101 GR) the field "Date of Manuf" is not populated on the batches(with todays date) which I checked in MSC3N.
Because of this the shelf life is not getting populated(based on Shelf life data from MM) and is causing my Batch determination process to not work in Sales order/Delivery.
Can anyone tell me if there is a config or master data set up
1) which will either populate the field "Date of Manuf" automatically(when I do GR or Usage)
or
2) If it can give a pop up during Quality Inspection(usage) or Process order confirmation that will force someone to enter the Date of Manuf.
Also when I check my classification tab for the batch(in MSC3N), the classification data does not gets created, which afffects my Batch determination process during Sales order/Delivery process.
I have to manually go in the Batch(MSC2N) and enter todays date for Date of manuf and create classification data.
Any Ideas what the issue is?
Thanks
SAP Fans...

Hi, what you can do i set total shelf life in Plant Data / storage 1 view in the material master. In such way the date of manufacture will be required field to enter when you produce material. Shelf life date will be calculated automatically based on the total shelf life mantained. In some transactions (we are using MFBF) when total shelf life is populated in the material master, the date of production is defaulted in the transaction (with the current date), you can check if this is applicable in your scenario.
Best Regards, Peter
Hi, in addition to that you can check transaction OMCV - here you can activate automatic batch classification per movement type - so the batches can be classified automatically by SAP
Edited by: Petar Stoyanov on Feb 24, 2009 10:49 PM

Process order release date as batch manufacturing date

Hi All,
We have automatic batch creation during the release of the process order. Now the requirement is that proess order release date should be updated as Batch manufacturing date in the corresponding Batch data (MSC3N). How this can be done.
Regards
Vinamrath

Hi Vinamrath,
Hope your proess order release date and the batch creation date are same.
In such case go to txn CT04 (create Characteristic) and create a Characteristic say "Batch manufacturing date". Then in the tab Addnl data maintain the table name as "MCH1 or MCHA" and Field name as "ERSDA" (created on-this is the batch creation date).
In case your proess order release date and the batch creation date are not same, then there is a field called " HSDAT" -date of manufacture.you can maintain this field name in addnl data.
Maintain this Characteristic in classification (CL02)
Then this will get updated in the batch and same can be viewed in MSC3N
Regards
Hari
Edited by: Harikris_83 on Sep 29, 2011 3:05 PM

Auto creation of Batch master data when external batch no entered in PR

Dear All,
At persent we can auto create batches at production order creation level, Goods receipt level.
In same way how we can achive auto creation of Batch master data at Purchase Requisition level.
Regards,
Manoj

There is no auto-creation of batches that are entered in ME51N. SAP issues message ME178 telling you that the batch entered does not exist.
You have to maintain the batch in MSC1N first, then you can enter it in the PR.

Creation of virtual characteristic

I have to create a virtual characteristic (ZVCDOCNO) same as another object (Document Number - ZDOC_NO).
This virtual characteristic should have same data as Document number but should contain values that begin with 11.
I have checked the forum and found some good inputs, but all of them have been done using BADIs.
Is there any other method other than BADIs?
Solution suing BADI
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e051fda8-71a9-2a10-ac9e-8d17414a8c8c?QuickLink=index&overridelayout=true]
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c?QuickLink=index&overridelayout=true]
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04be008-86cc-2c10-4bad-e517ea3f4c80?QuickLink=index&overridelayout=true]
Using BADIs what will be the DEFINE and COMPUTE codes.

I created and interface.
In the Class interface
Attributes tab
Attribute          Level              Visibility     Typing    Associated Type
P_CHA_ZDOC_NO      Instance Attribute      Public         Type      VBELN
P_CHA_ZVCDOCNO     Instance Attribute      Public         Type      VBELN
In Methods tab
IF_EX_RSR_OLAP_BADI~DEFINE
method IF_EX_RSR_OLAP_BADI~DEFINE.
CASE i_s_rkb1d-infocube.
    When 'ZBKDSO'.
      Append 'ZVCDOCNO' to c_t_chanm.
ENDCASE.
endmethod.
IF_EX_RSR_OLAP_BADI~COMPUTE
method IF_EX_RSR_OLAP_BADI~COMPUTE.
FIELD-SYMBOLS <fs_zdoc_no> TYPE /BI0/OIZDOC_NO.
FIELD-SYMBOLS <fs_zvcdocno> TYPE /BIC/OIZVCDOCNO.
If P_CHA_ZDOC_NO is not initial.
ASSIGN COMPONENT P_CHA_ZDOC_NO OF STRUCTURE c_s_data to <fs_zdoc_no>.
IF <fs_zdoc_no>(2) = '11'.
<fs_zvcdocno> = <fs_zdoc_no>.
ENDIF.
endif.
endmethod
I still find some logic missing. What are the changes to be done to code?

Urgent: Net due date virtual characteristic.

Hi,
We are implementing net due date virtual characteristic. Could some please provide the coding for implementing this in ZXRSRZZZ program. Its very urgent.

Hi shiva,
sent to ur mail
hope it helps
bhaskar

E-Recruiting 6.0 SP11 - How to do data migration or batch creation

Hi Experts,
For R/3, we can use BDC programs to do data migration for personnel records.
For E-Recruiting, how do we go about migration of candidate records or batch creation of candidate records (eg, BDC, standard function module, direct append)?
If it is via function module, can you share with me the name of the function module?
Thanks,
William

Hello William,
the Business Partner is an application / module which belongs to the base components of the SAP. It is used and partly extended by various other applications / modules. Next to E-Recruiting it is used for example by CRM and the financial service solution (FS-CS, FS-PM, FS-RI). All of these modules can put their data for a person or an organization into the same tables. Depending on the installation / system environment or even within one single module the requirements for available fields and business checks as on authorization differ between kinds of business partners (e.g. in FS-CS the commission solution for the financial service sector knows external agents and internal employees which have to be treated differently). The business partner is the element to assign the logical / business role in which a person is handled by the system.
For E-Recruiting you have 2 kinds of business partners, too. On the one and there are people being candidates and on the other hand there are branches of your company which hire people. The configuration allows you to seperate them if you need to identify anywhen which business partner is a branch and which is a candidate. So far I never tried if this is really working as there is no real use for this I never set it up. The attributes and the business checks are the same anyways.
Hope that helps a bit to understand the context
Best Regards
Roman Weise
PS: please remember that you have to maintain the branches via administrator bsp application. Using the IMG entry won't work.

Hyper-V 2012 R2 Virtual machine creation date resets to 01/01/1601 after host reboot

Server 2012 R2 with Hyper-V stand-alone, no cluster. I created new virtual machine. When I rebooted host, I noticed that creation date of the VM becames wrong, something of 01/01/1601.
VM creation date does not persists between Hyper-V host reboots or restarting of the VMM service.

Yes, there's a known bug. While the VM is running, hit the stop service button (or net stop vmms from the command line) and restart it (or net start vmms from the command line).
John Howard, Senior Program Manager, Hyper-V Team, Microsoft Corporation.
This posting is provided AS IS with no warranties, and confers no rights. You assume all risk for your use.

Batch convert and preserve creation dates

Hello,
How can I batch convert videos and preserve creation dates.
I have a big collection of family video that I want to convert, but preserving the dates is crucial for sorting by date after.
Any ideas if the creation date can be transfered to the video EXIF of similar ?
Simcerely
Dan

There are a few things you can do in Compressors...
You can add Annotations to the video. Click on the video in the video well, Inspector window, Additional Information tab:
and/or you can add a small text overlay to the bottom right of the video; Inspector window, Filter tab, Text Overlay:

Applescript to batch change creation dates (different dates each file)

I was pointed to an older thread that almost gets me what I need, but I'm not great with applescript, so I'm lost. Basically, I have a bunch of files. The name of the files are in a yyyymmddhhmmss.extension format (such as 20040710141231.mp4). I want to set the creation date of each file to the date by which they are all named. I found the older thread with a similar script and modified it, but I know it's not all there. I can post the whole script, but I'm pretty sure my main issue is with this part:)
                    tell originalFileCreationDate
                              set myY to year
                              set myM to text -2 through end of ("0" & (its month as integer))
                              set myD to text -2 through end of ("0" & day)
                              set myHr to text -2 through end of ("0" & (its time) div 3600)
                              set myMin to text -2 through end of ("0" & (its time) mod 3600 div 60)
                              set mySec to text -2 through end of ("0" & (its time) mod 60 as text)
                    end tell
I'm not sure how to write that to set the date based on the file name. Can someone point me in the right direction?
Thanks.

Try this instead.
This will change the access and modification times of the file:
set theDir to choose folder
do shell script "
for f in " & POSIX path of theDir & "*
do
          n=${f##*/}
          if [[ $n =~ ^[0-9]{14} ]]; then
                   touch -t ${n:0:12}.${n:12:2} \"$f\"
          fi
done

Batch Creation Date as a Virtual Characteristic in 0IC_C03 Inventory Cube

Similar Messages

Maybe you are looking for