Batch details window cannot save UDF value

Hi experts!
  Did anybody else experience that if you want to update a user defined field of a batch in 'Batch details' window, it pretends as everything was saved successfully, but UDF values are not saved in fact. I tried it with 8.81 PL05 (and earlier versions as well)
  I found a note (1431365) of a similar problem but it is about the General update button of "Batch management" window, and this note suggests to use "Batch details" instead. Quite weird that updating (normal update, not global) a UDF value in "Batch management" window seems to work fine for me, the modified value can be seen on "Batch details" window.
Regards: Gergő

Well, originally our customer recorded this behavior on 8.8 PL20 (8.80.238)
I tried it on almost the same database, in our developer environment, that has slightly different patch level: PL21.
Then i tried with a 8.81 PL05 database too. There are some addon installed, but none of them was running, and i could not find any formatted search on this window.
But i suppose i figured out what happened.
For updating UDF i always switch on the user defined fields window (Ctrl-shift-U), and use this window. I did so in this case as well. (and our customer did so)
But now i realized that in this case UDF-s appears on the native window as well. We have to scroll down to see them, that's why i hadn't realized them before. Those fields work fine. I guess you used those fields too. Can you confirm it?
Regards, Gergo

Similar Messages

  • Batch Details window should show warehouse name

    The window shows warehouse connected fields e.g. location, but we could not make visible the warehouse.
    We can use for example the field Location to store information about the location of the batch in the warehouse, but to make visible which warehouse it refers, we should show the warehouse in an other field!
    The problem may arise from the redundancy of the OIBT table. It stores information about the batches by warehouse, and the system synchronizes the common information in it. The batch details window is based on one entry from the OIBT table, shows different information for a batch on more then one window (if the batch exist in more then one warehouse), but does not show which warehouse it refers.

    Hi Michiko,
    First of all, did you also extract the HRP1002 table? HRT1002 has the key field ADATANR but this won't link to an orgunit ID without data from HRP1002. You need your new data to be linkable to an orgunit so it can be added to an orgunit data table or its own data table can be linked to an orgunit data table within the application.
    In AppResources.xml you need to add a data element or change a data element, depending on how your new fields are added to the database (new table = new data element / existing table = update existing data element). I woudl suggest adding the data to an existing data element otherwise additional configuration is required. You can probably add the new data to the database table that contains the orgunit data. This would then mean they would be available in your details designer in the Edit fields list.
    I hope that helps!
    Luke

  • Cannot Save NULL value to database

    I cannot save a null value through the data tab in the multi-row updates pane. It always gives me an error such as "Invalid number". It works fine through normal SQL update statement. Is there a preference somewhere to turn this on?
    thanks in advance
    Paul P

    Hi Paul,
    Just use the backspace key to obliterate any existing value -- that makes it null. Afterwards, if you refresh or close/reopen the object, the data tab will display any null as the value set in Tools | Preferences | Database | Advanced | Display Null Value As .
    Regards,
    Gary
    SQL Developer Team

  • UDF Value not showing in SQL

    Dear Experts...
    Here is a strange situation in my DB. I have some UDF on A/P Invoice for TAX details print preview.
    UDF Values are properly showing in SAP but not in SQL in same table, Same document they are blank in SQL.
    I can't understand why SQL does not showing me Value of UDF.
    Regards,
    Ravi

    Hi Ravi,
    Run below query in query generator for specific document number and check if udf values are shown or not?
    SELECT T0.DocNum, T0.CardCode As 'Vendor Code',T0.CardName As 'Vendor Name', T0.NumAtCard As 'Vendor Ref. No.', T0.DocDate, T0.TaxDate, T0.DocTotal - T0.VatSum As 'Basic Value of Goods', T0.U_CENVAT As 'CENVAT', T0.U_ECess, T0.U_HSCess, T0.U_VAT_4, T0.U_Add_VAT1, T0.U_VAT_12,
    T0.U_Add_VAT2, T0.U_CST2, T0.U_CST4, T0.U_CST5, T0.U_Service_Tax, T0.U_ST_ECess, T0.U_ST_HSCess,T0.TotalExpns As 'Others',T0.DocTotal - T0.VATSUM As 'Total' FROM OPCH T0 WHERE T0.docType = 'I' and T0.DocNum=[%0]
    Thanks,
    Neetu

  • I still cannot save edited clips Premiere 12 windows 7

    I still cannot save edited clips Premiere 12 windows 7

    Howlb
    What computer operating system is your Premiere Elements running on?
    What are the properties of these source media video clips?
    How are you trying to save the edited video clips
    a. Publish+Share/ and one of the choices there and then an export of the whole Timeline content
    or
    b. Trying to save the edited video clips in a project selectively as separate files saved to the computer hard drive. If so, please detail.
    Have you posted a recent thread on this topic here recently? With the recent major update of the Adobe Premiere Elements Forum it has been more difficult for me to go back and look for prior recent threads posted by the user.
    Please review, supply the necessary details, and then we can customize troubleshooting to address your Premiere Elements workflow issue.
    Thank you.
    ATR

  • I'm using photoshop elements 2.0 and window vista.  when i want to crop i cannot enter any values in

    I'm using photoshop elements 2.0 and window vista.  when i want to crop i cannot enter any values in the width and height boxes.  the cursor won't enter.  same thing with resolution.  what did i do?  what's wrong?

    The first thing you might try is resetting the Crop Tool by right clicking on the crop icon in the tool options bar and choosing Reset Tool.
    If that doesn't work then the next thing is to reset the photoshop elements 2 settings file by holding down
    the Shift+Ctrl+Alt keys just after clicking or double clicking on the pse 2 shortcut.
    Keep holding the keys until a dialog appears ask if you want to delete the photoshop elements settings file
    and click yes in the dialog.

  • Cannot save files to Windows server 2003 file server from MAC

    Hi, 
    We have few MAC users and others mostly windows based users. Problem now is MAC users cannot save any files to the file server. I had the issues to save in the portable hard drive then i format the HDD to fat 32 and now i can save, But the file server cannot
    be done like that. 
    What i can do to save the files to file server? please advice me
    thanks 
    saththiyan

    I cannot attach another NAS as CEO need to save files to all the folders which is there in the file server already, 
    You can share the folder and map a drive across the network to access the shared folder on the file server. Shared folders formatted NTFS do not affect network access. You would do that by using the SMB. Here's how:
    How to Map Network Drive in Mac OS X
    http://www.technipages.com/how-to-map-network-drive-in-mac-os-x.html
    What OS version is the server? Is it a DC? You may need to reduce security on the server to allow Macs to access the server. Here's more info:
    How to Disable SMB 2.0 on Windows Vista/2008/2008 R2
    http://www.petri.co.il/how-to-disable-smb-2-on-windows-vista-or-server-2008.htm 
    "To disable SMB ... Otherwise, disable SMB signing on Windows Server 2003 domain controllers.
    http://support.microsoft.com/kb/325379
    How to enable Windows 98/ME/NT and MAC clients to logon to Windows 2003 based Domains
    http://support.microsoft.com/default.aspx/kb/555038
    Ace Fekay
    MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
    This post is provided AS-IS with no warranties or guarantees and confers no rights.

  • Why cant I rotate and save a picture from iphone 4s in windows photo viewer windows 7? the error is cannot save because there is a problem with the photo properties. I can rotate and save screenshots

    why cant i rotate and save a picture from iphone 4s in windows photo viewer windows 7? the error is cannot save because there is a problem with the photo properties. I can rotate and save screenshots

    Windows do not repect the digital EXIF specification. Use a free viewer http://www.irfanview.net/ for Windows.

  • FTP Error : Windows cannot acces folder ..... Details : Element not found

    Hi All,
    I'm just transferring to my new office that uses FTP as a means of storage for sensitive data. At first i can connect to ftp servers easily using windows explorer. But over time, when i'm about to connect to ftp server, the windows explorer replied
    Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access this folder. Details: Element not found
    I can access the ftp server using IE or another web browser, even using WINSCP and other ftp file transfer software. I need to be able to connect to ftp server using windows explorer again. Can any of you help?
    The ftp.exe is not blocked in firewall rules (i've checked).
    Any comments/helps are appreciated.

    Hi,
    Firstly, make sure you have enable "Enable FTP folder view (outside of Internet Explorer)" setting:
    Internet options -> Advanced -> Enable FTP folder view (outside of Internet Explorer)
    And then try use mapping network drive:
    1.Click on Computer.
    2.Click on Map network drive from the menu.
    3.Map Network Drive window will open. Now click on the link
    Connect to a Web site that you can use to store your documents and pictures.
    4.Now simply follow the step by step wizard to add a new network location. Select
    Choose a custom network location when given the choice of where to create this network connection.
    5.Type your ftp address. Specify a user name and password if required.
    6.Give your newly created network location.
    Alternative, use the registry method that was marked as answer in the following thread to fix it:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/this-ftp-site-cannot-be-viewed-in-windows-explorer/e699d41e-98ae-48c1-9231-d570d46c0f38
    Karen Hu
    TechNet Community Support

  • How can I resolve: cannot save any type of image in Illustrator CS6 on Windows XP SP3?

    I have a user who is on Windows XP SP3 and he cannot save any images in Illustrator CS6. When he selects eitheer of the save buttons, the location window comes up but nothing happens after that. We have given him admin rights and permissions for the computer and Illustrator, the UAC is off, we have deleted the pref folder, and we have done a reinstall of the software . Other users can log onto the same machine and Illustrator works fine for them, but; this particular user, who is the primary user of the computer, cannot save his work using the program. How can we fix this

    Flush out temp files and check disk permissions and quota. He may simply be running out of local storage space.
    Mylenium

  • Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

    Hi,
    starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
    a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
    We figured out a workaround though: The applications run fine when launching from a FQDN share (like
    \\share.domain.Company.com) and only cause problems when running from
    \\share directly. They have worked fine for years without FQDN though.
    Any ideas?
    Error Details (the Kind of error differs greatly):
    # 1 #
    Log Name: Application
    Source: Application Error
    Date: ...
    Event ID: 1005
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: vmDEV
    Description:
    Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
    because of this error.
    Program: XYZ
    File:
    The error value is listed in the Additional Data section.
    User Action
    1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
    2. If the file still cannot be accessed and
    - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
    - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
    3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
    4. If the problem persists, restore the file from a backup copy.
    5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
    Additional data
    Error value: C000020C [ also seen with code C00000C4]
    #2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
    Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x00026549
    ID des fehlerhaften Prozesses: 0x13ac
    Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
    Pfad der fehlerhaften Anwendung: \\share\application.exe
    Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
    Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    Anwendung: XYZ.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
    Stapel:
    # 3 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
       bei System.Windows.Forms.Control.NotifyEnter()
       bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
    # 4 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.IO.UnmanagedMemoryStream.ReadByte()
       bei System.IO.BinaryReader.ReadByte()
       bei System.IO.BinaryReader.Read7BitEncodedInt()
       bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
       bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
       bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
    # 5 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.Reflection.RuntimeParameterInfo.get_Name()
       bei System.Diagnostics.StackTrace.ToString(TraceFormat)
       bei System.Environment.GetStackTrace(System.Exception, Boolean)
       bei System.Exception.GetStackTrace(Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString()
    # 6 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
    Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
    Ausnahmecode: 0xe0434352
    Fehleroffset: 0x00012f71
    ID des fehlerhaften Prozesses: 0xa68
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
    Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
    Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    # 7 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
    Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x0006db27
    ID des fehlerhaften Prozesses: 0x18dc
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
    Pfad der fehlerhaften Anwendung: \\share\xyz.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
    Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

    Hi,
    >>The applications run fine when launching from a FQDN share
    It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
    the share correctly.
    If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows cannot load the user's profile but has logged you on with the default profile for the system.

    My Windows 7  crashed a couple days ago after a windows update, I got this message.
    Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
    I restarted the machine and got this message
    Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
    DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
    I checked the event Log I found these .
    Windows cannot load the user's profile but has logged you on with the default profile for the system.
    DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
    Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
    Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
     DETAIL - The process cannot access the file because it is being used by another process.
    This is the first error in the event viewer after a successful logon
    The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
     If the event originated on another computer, the display information had to be saved with the event.
    ccSetMgr
    Windows cannot load the user's profile but has logged you on with the default profile for the system.
    DETAIL - Access is denied.
    Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
    The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    then this one
    The Desktop Window Manager has exited with code (0x40010004)
    Then this before it shutdown.
    The User Profile Service has stopped.
    I started up the PC and the first message I got was
    How can I get access to my user profile? do I need to createa new Administrator account? Please help
    The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

    hi do the following
    1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
    2. If prompted click yes,
    3.  expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
    something similair)
    5. right click the sid and press delete.
    6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
    in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
    i cant remember which one is which but just check both, one will still have all your files and folders in it.
    i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

  • Generic file I/O error. Cannot save VI "filename.VI"

    Hi, I have LV 8.2.  I am having problems saving VI's after editing them.  I am getting the message:
    Generic file I/O error.  Cannot save VI "filename.VI"
    I can recreate the problem by creating a blank VI, placing a property node on the block diagram, right clicking on property and choosing, select property and in the window that pops up expanding Application and clicking on Directory path and clicking OK.  I save this VI to disk.  Then I load the file again and delete the property node. Now if I try to save that I get: Generic file I/O error.  Cannot save VI "filename.VI"
    Furthermore with the real VI that I am having problems with.  If, when I get the cannot save message, I do a "Save as" and save a copy as "filename backup" and then quit labview without saving the "filename" vi, when I run LabVIEW again I get:
    The last time you ran LabVIEW, an internal rror or crash occured at save.cpp, line 821.
    I click investigate internal error message now and get told there is a logfile of the error.  The contents of the file on one occasion were, quote:
    #Date: Thu, 9 Nov 2006 10:56:40 a.m.
    #OSName: Windows NT
    #OSVers: 5.1
    #AppName: LabVIEW
    #Version: 8.2
    #AppKind: FDS
    #AppModDate: 07/27/2006 00:08 GMT
    .\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics.vi" (0x05332ed0)] ident: [LinkIdentity "Instance          43 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
    $Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
    0x008CCBB6 - LabVIEW <unknown> + 0
    0x008D17CE - LabVIEW <unknown> + 0
    0x0100F864 - LabVIEW <unknown> + 0
    0x00528E26 - LabVIEW <unknown> + 0
    0x00529342 - LabVIEW <unknown> + 0
    0x0052960C - LabVIEW <unknown> + 0
    0x004D6D2F - LabVIEW <unknown> + 0
    0x004D7C95 - LabVIEW <unknown> + 0
    0x004D7CD8 - LabVIEW <unknown> + 0
    0x004DBA95 - LabVIEW <unknown> + 0
    0x004DBD50 - LabVIEW <unknown> + 0
    0x0051FD4C - LabVIEW <unknown> + 0
    0x0051FD6F - LabVIEW <unknown> + 0
    0x0122CA73 - LabVIEW <unknown> + 0
    0x77E735DD - kernel32 <unknown> + 0
    .\panel\save.cpp(821) : DWarn: failed to find instance vi we're holding, caller vi: [VI "Spreeta Automatic Fluidics 9 nov BU1.vi" (0x05332ed0)] ident: [LinkIdentity "Instance          45 26Spreeta Automatic Fluidics .vi" [ Main Application Instance]
    $Id: //labview/branches/Europa/dev/source/panel/save.cpp#112 $
    0x00D0FE4B - LabVIEW <unknown> + 0
    0x008C8E17 - LabVIEW <unknown> + 0
    0x008D1726 - LabVIEW <unknown> + 0
    0x008D212C - LabVIEW <unknown> + 0
    0x00C41E5E - LabVIEW <unknown> + 0
    0x00C46F31 - LabVIEW <unknown> + 0
    0x00C4796D - LabVIEW <unknown> + 0
    0x00C497C6 - LabVIEW <unknown> + 0
    0x004CCB39 - LabVIEW <unknown> + 0
    0x004D7C95 - LabVIEW <unknown> + 0
    0x004DF19A - LabVIEW <unknown> + 0
    0x77D48654 - USER32 <unknown> + 0
    0x77D48723 - USER32 <unknown> + 0
    0x77D48999 - USER32 <unknown> + 0
    0x77D48FD2 - USER32 <unknown> + 0
    End of Quote:
    Any ideas?

    Hello,
    Sorry you've encountered this problem.  The cpp error is a known issue, which is filed under corrective action request number : 42BI4OO5.  In a nutshell, this means R&D is looking into the problem.  I attempted to reproduce the problem as you described below, but I did not get the "Generic file I/O error" as you did.
    If you have any further insight or detail which perhaps is the key to reproducing this, please repost, and I'll try to reproduce this again!  In the mean time, does it help to copy and paste your code to a new VI, or does that VI suffer the same problem?
    Thank you,
    Best Regards,
    JLS
    PS -
    Standard CAR Response:
    "This was reported to R&D (42BI4OO5 CAR ID) for further investigation. Thanks for the feedback!"
    Best,
    JLS
    Sixclear

  • How to change UDF value in system form if its invisible or inactive?

    Hi all,
    I need to compute some document total values and save them on UDFs defined on Sales Order Header document, when the user adds a new order line.
    However I must not allow the user to change them (or see them). Also, there are other UDFs on the Sales Order Header that the user must be allowed to change...
    Is there any way to control this? If I set a UDF as not 'Active', I cannot change its value with programming.
    I'm using the following command to change a UDF value on the Sales Order form:
                        Form form = B1Connections.theAppl.Forms.GetForm("-139", pVal.FormTypeCount);
                        EditText et = (EditText)form2.Items.Item("U_TotalTax1").Specific;
                        et.Value = "10";     // this raises an exception "Form item is not editable"
    Is there any other way to change this UDF contents (maybe with datasources? etc)
    Thanks all,
    Manuel Dias

    Hi You can Enable/Disable the item after your transaction. follows the code
    oForm.Items.Item("U_TotalTax1").Enabled = True
    oEdit.value=10
    oForm.Items.Item("U_TotalTax1").Enabled = False
    Try this
    Manmath

  • Cannot save opened tabs before closing the browser

    Cannot save opened tabs before closing the browser. I do not know if there is such a feature (should be), and how to activate it.
    It was very useful with previous version.

    One change in Firefox 4 is to by default stop Firefox displaying the warning message, but it can be turned back on by changing some preferences.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
    # Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
    If you always open the last set of tabs an alternative approach is this:
    # Click the orange Firefox button, then select options to open the options window
    # Go to the General panel
    # Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

Maybe you are looking for