Batch Determination at Delivery
We assign Storage Location per Shipping Point.. for example, Shipping POint 1000 should get from SLoc 0001.
In the warehouse, we have two storage locations, 0001 & 0002.
When we do automatic batch determination, if there are no stocks in 0001, it will get available stocks in 0002, changing the storage location in the Delivery automatically.
But, we don't want this to happen. How can we limit batch check at storage location level? (e.g. in the example above, should look only at storage location 0001, the SLoc which is assigned to the Shipping Point)
Hi,
We can exclude or avoaid the availability check at storage location level,
OVZ9 >>> Select check rule and check group combination >>> details
Remove tickmark of No storage location inspection
Then,
IMG >>>> MM >>> Consumption based planning >>> Planing >>> Define Storage Location MRP per Plant
Here put indicator - 1 (exclude storage location from MRP), in front of strorage location for which u want to avoaid batch stock availability.
TRY AND SEE IS IT FULLFILL YOUR REQUIREMENTS
Kapil
Similar Messages
-
FIFO batch determination while delivery in SD
Hi Experts
I did tried to search FIFO batch determination while delivery in SD, but could not find any solution. Please suggest.
1. Strategy type -SD01
2. Batch search Procedure - SD0001
3. Allocated SD Search procedure to the sales area + Sales doc. Type
4. Activated automatic batch determination in SD.
5. Class - CLASS_FIFO is created with Char- LOBM_LWEDT
6. Sort rule - SORT_FIFO and assigned Char - LOBM_LWEDT
7. Create material and assiged Class - CLASS_FIFO and Batch management is activated
8. Maintained condition record VCH1 in keycombination - Material.
After all above configuration, I am able to do the automatic batch determiation. The suggest where I am wrong.
The same configuration I have done for FEFO and its working.
Thanks in advance.
Regards,
Kaushal Sharma.I have resolved the problem
Happy to note you have resolved on your own but at the same time, your above comments are not going to help anybody who face similar issue. Please make it as a practice to update the forum properly as to how you resolved
G. Lakshmipathi -
Help needed in Automatic Batch determination during Delivery
Hello gurus..
Can anyone point me in the right direction. I am trying to trigger auto batch determination during delivery creation based on available batches. thank you
If any can give me the config that goes with it, that'll be greatSteps to configure Batch Management
1) Specify Batch Level
Menu Path Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction OMCT
2) Batch Number - Activate Internal Number Assignment
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction OMCZ
3) Batch Creation - for Goods Movements
Menu Path Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements
4) Characteristic Value Assignment -- Update Standard Characteristics
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics
5) Activate Batch Classification for Goods Movements in Inventory Management
Menu Path Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction OMCV
6) Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction OPLB
7) Batch Determination Condition Table(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction V/C7
8) Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction OPLF
9) Batch Determination Access Sequence(Cross Client)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction V/C2
10) Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction OPLE
11) Batch Determination Strategy Types
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction V/C1
12) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM Search Procedure Transaction OMCY
13) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction OPLG
14) Batch Determination Batch Search Procedure
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction V/C3
15) Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction OMCG
16) Batch Determination Batch Search Procedure Allocation
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction OPL8
17) Batch Determination Batch Search Procedure Allocation(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction V/C5
18) Batch Determination Activate Automatic Batch Determination(SD)
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction V/CL
19) Batch Determination Batch Selection Class
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction CL01
20) Batch Determination Sort Rule
Menu Path Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction CU70
21) Batch Determination Make Settings for Batch Where-used list
Menu Path Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction OMBB
thanks
G. Lakshmipathi -
Automatic Batch Determination in Delivery documentation
Dear all,
I am trying to do automatic batch determination in Delivery created w.r.t. Sales order.
if the material availability date in Sales order in say 15.11.2007, while activating batch determination check in Sales order will it prompt the batch for the sales order stock for the current date? It is not happening for the current date nor for the future date.
This is being tested in ECC 6.0.
Can anyone help with the solution please?
Thanks
KumaranHi Kumarank
I am not sure whether the following links would be of helpful to you.
http://help.sap.com/saphelp_47x200/helpdata/en/25/283cb44f7811d18a150000e816ae6e/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/25/283c9a4f7811d18a150000e816ae6e/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/25/283ab94f7811d18a150000e816ae6e/frameset.htm
Thanks
G. Lakshmipathi -
Batch Determination in Delivery
Hi All,
In batch determination (Delivery) on clicking batch split and opting for batch determination i am not able to find batches....if i click on log and expanding it shows the following message.
B77 Material For Batch Mangement
Batch stocks are being read...
Batch 111 Storage location 0001
Search according to selection criteria...
Batch 111
E- Does not correspond to selection criteria(This is in red color line)
Availability of batches...
Batches are being sorted...
If I select batch determination-> without class selection in the menu bar in Batch Determination screen(delivery)
then it is picking the batch.
Kindly guide me.. where i have done the mistake.
With Regards
Azeez.MohdIn addition to the above,
assume you are using, Characteristic: LOBM_HSDAT = Batch date of mfg.
if yes,
check the stock in MMBE , now goto MSC2N key in respective material / Plant & batch.
in classifcation tab,- check whether date of mfg field has value or not.
if not enter the value in Basic data -1 tab,
now try to create the delivery & check.
( assume, you have done the necessary batch determination customization )
Test & revert -
Issue with batch determination in delivery
Hi All,
I have an STO and when creating delivery via VL10I I get an error "doc is incomplete, you cannot save delivery". I have all the sufficient data in STo for delivery creation. Infact there should be batch strategy not taking place i guess.
When I enter batch number in STO then a delivery is created, why? batch shd be determined automatically when creating deliveries.
But there is no issue is quality system with same materials and plants I can create deliveries..Hi,
Are you sure that the incompletion is because of Batch determination?
In that case goto
Spro> Log. general> Batch management> Batch determination and batch check> Activate automatic batch determination for delivery item
and flag Auto Batch det check box for Item category "NLN"
Hope this helps.
Regards,
sharan -
Batch determination during delivery and Picking
Hi,
Please let me know how to meet the below requirement.
During delivery creation for sales order automattically through the program RVV50R10C, The system should do the batch determination automatically for the delivered qty and the picked quantity should be filled auotomatically same as the delivered qty.
I have maintained condition record for batch determination for the combination of Shipping point, Sales document type and Material type and also automatic batch determination for delivery item categories is activated in customization ( the check box for delivery item category is ticked).
With the above setting manual batch determination is working in delivery. but not the automatic batch determination and also the picked qty is not filled.
Regards,
PrasadHi Sats,
1. The respective item cat. has been checked in Automatic Batch Determination for Delivery Item cat. u2013 Transaction V/CL - maintained
2. Configured it correctly in transaction V/C5 where you configured the search procedure for batches in the sales docs with respect to the sales area and sales doc type which you are using -maintained
3. Check if shelf life expiration date needed. If yes check in transaction CL03 with the class type 023 - Class maintained in the material master
4. Make sure the batch management check box has been ticked for the materials which you want automatic batch determination to be done in MM03 u2013 Sales: General/Plant tab, Purchasing and warehouse management tab. - The batch management indicator is set
5. Open your delivery in VL03n u2013 check the batch determination display. Select the strategy analysis and check. it gives you information whether the condition types were successfully taken into consideration. If not check in VCH3 - Condition record has been specified.
Manual batch determination works ( select the line item in delivery > Batch split> Batch determination )but not the automatic batch determination.
Regards,
Prasad -
Empty batch determined in delivery
Hi friends,
I have a problem in batch determination and I dont have much knowledge on this. We are using automatic batch determination in Deliveries. For some of the line items the batch determined is empty (no stock). Deliveries are created using VL10A tcode. However I could trace some reasons for that.
1. In Sales Order the line item is not confirmed for that date. Schedule lines are confirmed for future date.
2. Deliveries are able to be created using VL10a transaction (even the future delvieries without stock confirmation)
3. Automatic batch determination is run and empty batches are assigned. That means batch with no stock.
4. For assigned batch, stock is zero (available quantity) and expiry date is in the past.
5. For this item in delivery, the staging date is in the future and Planned GI is present.
I want to fix:
1. Why the delivery creation is not blocked for unconfirmed line items in Sales Order using VL10a tcode whereas it is blocked using VL01 tcode.
2. How come empty batch is determined.
Appreciate your response and thanks in advance.
Regards,
AKHi,
1. Why the delivery creation is not blocked for unconfirmed line items in Sales Order using VL10a tcode whereas it is blocked using VL01 tcode.
- You may need to check OSS notes 113411 and in particular 355666
2. How come empty batch is determined.
- You may need to check the batch search strategy using transaction code VCH2 for the particular material.
Regards -
Automatic Batch Determination in Delivery
Hello all,
I need you help.
business required that the batch of the high level item be automatically determined in the delivery document
We acticated 1.Delivery item category for Autom Batch Determ
Activate the item ctg for batch determ;
Delivery item cat assigned to the delivery type LF usage CHSP
in Delvery .. if the sales order type is Standared (OR) its working fine and doing batch determination automatically.
But if the sales order type is custom (ZXXX) then its not automatically determining the Batch in Delivery,
am i missing any configuaration linked to sales order type.Please let me know.
Thanks & Regards,
SanjuHi Sanju,
Have you assigned the batch search procedure to this custom order type?
Please check in t-code v/c5.
Please reward points if helpful.
Regards
Jean -
Batch determination at delivery stage
11.09.2010
Hi friends, i want the batch to be determined at the delivery level not at the sales order.
Should i update the "Allocate SD search Procedure /Activate check"? If its to be updated then in the combination of Sales Org / Dist Ch / Divn /Sales Doc typ /Search procedure / Check batch what should be updated under the "Sales document type" column.
I have updated the delivery item category in the Acitvate Automatic Batch determination in SD". Please advise.
Regards,
UdayIf you want the batch to be determined in delivery , remove the Automatic batch determination from Sales Order item category and activate in Delivery item category ?.. Other than that , the basic configuration and all same as you mentioned ?.. The sales order type only to be updated under " sales document column"...
With Regards
S.Siva -
Automatic Batch determination at Delivery
Hi,
We have multiple batches for a material. Is it possible to determine Automatic batch determination by FIFO at the time of delivery.
e.g a material A has stock 50 Pcs.
10 Pcs- Batch A
20 Pcs -Batch B
20 Pcs - Batch C
Suppose i have sales order for 30 Pcs. Then at time of delivery can system automatically allot batch A and B on FIFO basis. I dont have to select batch for 1o pcHello,
Ideally FIFO method is used for batch managed material along with material which have shelf life expiry date check. If you have setup FIFO method for batch determination for stock removal for a combination of your warehouse and storage type, then system will those batch which are oldest. It will check the Goods reciept date for your batch in the respective storage bin and will pick those batches.
Now as in your case, 10 Pcs- Batch A , 20 Pcs -Batch B , 20 Pcs - Batch C, system is bound to take those batch which are oldest , with respect to there goods reciept date.
I hope this helps
BR,
Tushar -
Production order component batch determination : Over delivery allowed in b
Iu2019m using production order component batch determination in CO02. System is not allowed to allocate an excess component split batch quantity. System is always allowed to allocate exact requirement quantity where to make open quantity is 0.
It generates the following massage once click enter after selecting an excess component quantity. My requirement is to add the excess quantity in component batch determination.
Massage details:
Quantity of batch 0052902459 is reduced to 9.300 KG as split qty > req. qty
Message no. LB034
Diagnosis
The split quantity of the chosen batch has lead to the split quantity total exceeding the required quantity.
System Response
The quantity is rounded down by the system.
Procedure
An overdelivery is not allowed by the current business transaction.
Procedure for System Administration
If necessary, check the batch search strategy to see whether an overdelivery is allowed.
I have maintained the configuration in transaction COB1 as follows to enable over delivery batch determination.
Strategy type: CO01- OrdType/Plnt/Matl
Key combination: Order type
Over delivery allowed in batch determination: Tick on
Please let me know the configuration to enable to do component batch determination with minus open quantity (Excess component quantity)Hi,
As I understand it seems that you do not have batch split allowed in the auto batch determination for component materials. And you need to have batch split on a need to basis?
If thats true, then on the line item in the component overview. Select the item details for the Batch that has been determined (general view, there is a field for split in terms of %, change that from 100% to a the lower value you want to pick from that batch). It should then allow you to add more batches.
let me know if my assumption and answer helps. -
Batch determination in delivery proposes batch already scheduled
For one specific plant, when batch determination is done in the delivery, batches already scheduled for delivery are being proposed as still available. What can be causing this?
Hello,
I finally solved this issue, here are the steps I did to find the solution:
1. In transaction SPRO
->Logistics-General->Batch Management->Batch Determination and Batch Check->Strategy Types->Define Sales and Distribution Strategy Types
Check the condition Type (In my case SD01), the Field Class contains the selection class with the logic to determine stock (In my case Z_MM_FERT)
Chek the Sort Sequence (In my case SEQUENCIA)
2. Go to transaction CU72 with the Sort Sequence (SEQUENCIA), in characteristic must have the following values:
LOBM_VFDAT Expiration date, shelf life Ascending (Checked)
3. Go to transaction CL02 with the class founded in the previous step (Z_MM_FERT), in the characteristics TAB must have the following values:
LOBM_VFDAT Expiration date, shelf life
LOBM_ZUSTD Status of Batch
LOBM_QNDAT Next Insp. Date for Batch
LOBM_LVORM Deletion Ind. for Batches
4. Go to transaction MM03 with the material that you have in Delivery, chek the TAB Classification, Option Batch 022, the material must be associated to the selection Class (Z_MM_FERT), but it must be associated trought transaction MM01
5. In transaction OVZ9, double click in the row with the column Availability check = CH Batches and Checking Rule = B SD Delivery
Option Include Deliveries, must be Checked.
6. Material that you have in Delivery, must be created in transaction VCH1 with the according Strategy Type (SD01)
Best regards,
Alejandro Lopez -
Error in automatic batch determination in delivery
Hello Experts,
I have an outbound delivery created for a STO.
The issue is the batch is not getting detected automatically in the delivery and i have to manually enter the batch.
I have checked in SPRO and automatic batch determination is activated for delivery item category.
Can anyone please guid what further i need check to have the batch being automatically detected.
Thanks.Hi Nish,
Since the delivery is related to STO, pls check the following config settings.
1. spro-->logistics general->batchmanagement->batach der and batch check->batch search procedure
allocation and check activation->allocate sd procedure/activate check.
(Before performing the below steps define the strategy type and assign the strategy type to procedure)
SLSORGDCDIVDOCTYPESEARCHPRO+CHECKBATCH
10001010DLSD0001+X
10001010nlSD0001+X
2. Activate automatiic batch determination in SD-> auto Batch determination for deliveryitem categories
NLN
NLC
3. Check the delivery item cat determination for batch split.T.code:0184
nlccnormuln
nlccnormchsp+nln
nlnormuln
nlnormchsp+nlc.
4.Now maintain the strategy type Ex:SD01 with VCH1 T.code along with your own sort rule.
These above config settings should satisfy your needs.
Regards,
Satish
Edited by: Satheesh on Jun 11, 2009 5:24 PM -
Batch Determination during delivery
Hi All
While doing delivery for STO, system is giving a message "Batch determination is not possible because there is no search procedure"
But Batch determination is happening fine for all movements except STO Delivery.
is there any other settings required for STO Delivery (for inter and intra company codes) for batch determination.
Regards
M S KOk
Maybe you are looking for
-
I'm trying to insert page numbers on ALL pages in a document in InDesign CS4. But I can only get page numbers to the page 74? This is so annoying, and it's due on monday, and I'm running out of time. Can anybody tell me, short and easy, how I can get
-
I just bought a new Macbook Pro and Itunes is not letting me authorize it for use because I have 5 computers authorized including old iphones I no longer have and an old computer that is broken. How do I deauthorize computers I no longer have?
-
Laserjet 100 color mfp M175mw, Help
Screen did display Ready on the left & Secure on the right, I've had bt take control of my pooter due to printer not connecting to router!!! any idea's.
-
I do not have sound on my MacBook Air
I tried to watch news videos and You Tube videos and I have no sound.
-
HELP - Look at my desktop!
One of our clients on our system had a major crash while searching through Finder. Any ideas? Different logins have same results. Names within finder are fine, spotlight search results are ok, but HD name, any finder options, apple options are all sc