Batch determination at time of order creation

Dear All,
When i am creating process order at the time system not allowing me to execute batch determaination after release only it is allowing me to do.
My requirement is At the time of order creation i want assign batches ( Execute Batch Detrmination)for the material.
how to do this one, kindly hel me
Regards,
s.sakthivel

Craig- you are correct. That setting is about how to create a batch for the Material produced , does not have any impact on the batch determination for the raw materials consumed.
I dont think there is a way to do the batch determination before releasing the order. The other option isto go for the automatic release of the order at creation - this option will carry out the batch determination automatically once an oder is created and order will be released. check with PP consultant on this.
Hope it helps.
Thanks,
Ram

Similar Messages

  • Process Order Batch number generation at the time of order creation

    Dear All,
    I m facing some issue at the time process order creation:
    Current Settings:
    1. Batch Number Creation at the time of order create.
    Reason for this setting: Release of order is done  by releasing operations one by one, therfore batch number will be generated on the final operation release, thats why we set up batch creation at the time of order create.
    2. For FG batch number generation there is a program that copy the SFG(in Order BOM) Batch number to FG. ITs a industry requirement.
    Problem:
    when we create FG order system generate the error message at the time of order creation tht No batch could be determine.
    Please suggest the solution
    Thanks,

    Hi
    Hope you have cretaed Batch serch strategy in COB1
    U need to maintain it as per your strategy type.

  • Want to change item category at the time of order creation

    Hi Gurus,
    Client require to implement individual PO scenario.
    I was configured the same and working fine.
    I am facing problem at the time of item category determination.
    User using same material and order type and they are not ready to accept to create new order type.
    Now My order type is OR and item category group is NORM and right now system determine item category TAN.
    User not want to change manually at the time of order creation.
    I have specific condition on which i want to apply this logic.
    Now i want to determine TAB item category through some user exits or enhancement.
    Can anyone suggest exact in which user exit or enhancement i have to change.
    Thanks & Regards,
    Chirag

    1. Use TCode 0VVW for creating a Z Item Usage, say, ZPO1
    2. Do an item Cat determination in VOV4, as
    Sales Doc type
    Item Cat Group
    Usage
    Item Category
    OR -
    NORM -
    ZPO1 -
    TAB
    3. Maintain Customer Materials Info Record by using VD51.
    In item screen for Cust-Mat combination maintain Item usage
    Regards
    JP

  • Batch no assigning during production order creation

    Sir,
    We are manitaining the batch management for inut raw materials. During production order creation it is mandatory to assign the batch no for raw materials then only production order releasing is possible.In our case due to batch assignement to production order while order creation,we are facing the lot of problems like batch no not assign for full req qty and also if unavailabilty of stock for particular batch no it will come to COGI.hereby i need experts help for,
    1.I want to determine the batch no during confirmation instead of order creation and also allow to release the production order even batch should be in blank.
    Kindly help
    Regards,
    PS

    Hi
    For Rawmaterials why cant'n you assign Batch nos buring GR of purchase order.
    Then you can do automatic batch determination during confirmation of order for mvrmt type ;261...
    This is  easy  to handle.
    Please check and come back
    Regards,
    srihari

  • Create warning message at the time of order creation

    I am looking for a  solution :- "Create warning message at the time of order creation/save if a cc is assigned in the settlement rule that crosses the company code of the order or where the company code of the plant for the order is different from the company code assigned to the cc"

    The txn code : IW32 (maintenance order) , this warning message for settlement rule creation using Cost center as a settlement receiver.  If the used cost center is belongs to some other company code, said warning message should occure.
    I tried user exit, field exit, also used std message control (KO-458).  Nothing is working.

  • Manual BOM selection at the time of order creation

    Dear Experts,
    Could you help me to understand if there is any provision to select BOM by user at the time of order creation without the help of production version.Is there any configuration required to make BOM selected manually.
    Regards,
    Krishna Mohan

    Hi karishna,
    Please go to T-code OPL8 and in production version use( 1 )Manual selection of production version. Then user can select manually instead of automatic selection.
    Regards
    Muhammad Umar

  • Batch creation at the time of order creation & confirmation on the batch.

    Hi all,
    My client's requirement is while creation of the production order of say 100 pcs, system should create 4 batches, each of 25 (this might be different every time) of that order & also the confirmation (CO11) should be done on those batches.
    Also if the order contains 10 operations then confirmation of operation no. 0020 should not be possible before confirmation of 10, whether it is for partial & whole quantity.
    You can say these batches will reprsent the lots.
    Regards
    SmanS
    Edited by: SAP PP Consultant on Mar 9, 2009 8:05 AM

    Hi SAP PP
    You can use this function to automatically create a batch for the material to be produced.
    You can make the following settings in Customizing (production scheduling profile):
    No automatic creation of batches in production orders
    Automatic creation of batches during order creation
    Automatic creation of batches during order release
    To carry out automatic batch splitting via batch determination, proceed as follows:
    Select the component that you wish to split and choose Component ® Batch management ® Trigger batch det.
    The system lists all batches that meet the selection criteria and that have available stock on the requirements date.
    Distribute the required quantity as required over the existing batches.
    Choose .
    The system copies each batch as a separate component into the component overview screen.
    For more information refer to Batch Determination.
    To carry out manual batch splitting with manual batch assignment, proceed as follows:
    Select the component for which you want to carry out batch splitting. Choose Edit ® Insert ® Batch split.
    Enter the batch number and the required quantity manually in the component.
    Save your entry.
    Regards
    Sachin

  • Automatic Batch determination at time of Goods receipt for production order

    Hi SAP experts,
                             Greetings to you all. I wish to ask a query that how batch is determined automatically at the time of goods receipt for production order .
                             I have done the following settings:
    1.Specified batch level at material level
    2.External batch number assignment
    3.Defined production order condition table '501' (plant/material)
    4.Defined production order access sequence (order type-plant -material)
    5.Defined Production Order Strategy type.
    6.Defined Batch search procedure in Production Order.
    7.Assigned Batch search procedure to Production order type for a particular plant  , batch check not activated.
    Please let me know of any more settings to be checked for the same.
    For example, a production order is being confirmed for a quatity of 5 nos . at a time . However, the GI movement (261 movement type) for the production order components  is taking place for 1 EA qty. from 5 different batches.
    So now, how the system will define the GR (movement type 101) for the production order header material for the qty. 5 nos. EA ?
    It is desired that the system should do GR for the qty.  1 EA of the header material for the 5 different batches (batches which were automatically deteremined for the Goods issue of the components).
    Thanks in advance. good day.
    Best regards,
    RB

    HI Rahul,
    As explained earlier, for e.g., if the GR is taking place for the production order for qty. 5 nos. , and in that , if the component qty. is 1 EA for 1EA of header material ; then , the GR for the header material should take place for the same different batches from which the order components were issued for the order and not for the other batches in stock for the header material as well as components.
    I am not sure if i understand your requirement 100%.
    But let me explain you standard behaviour.
    When Confirmation for production order happens and GR is posted during confirmation , All the GR happens agaist same batch number which i sassigned in production order assignment screen.
    So for all the order qty single batch would be fixed. Say batch A1 is created for Header material for 100 qty.
    Now during components issue to production order, If 100 qty needs to be issued for compoenent B it is possible to use multiple batches of componenets ( using splilt batch functionality /or manual batch number entry agaist componenet in goods movement screen) but header batch remains the same.
    Check and Revert,
    Santosh Sarda

  • Batches not getting  for order components at time of order creation

    Hi Folks,
    My requirement is that when I create a production order and save automatic batch determination should take place for all components. For this I have done all the settings for eg
    1) Assigment of batch search proceduree to order type
    2) Define batch search strategy,procedure , condition , access sequence
    3) Create batch strategy record for order type/ plant/component by COB1
    4) Create sort rule and assign to batch strategy record
    5) Batch classification is there and value of the sort chracteristic is populated in all batches
    6) There is enough available stock in the batch at that storage location
    But batch field is not getting populated .. Even if I press the batch determintion button manually
    on the component overview screen batch selection screen is appearing but no batches are getting determined for selection .I have checked the selection criteria and it is correct and I was expecting batch 'ZSWETA' to b determined as it is satisfying the selection criteria. I am really wondering why this is happening as I have done all the required config settings but batch determination is not happening..
    Can you please help me out of this...
    Regards
    Suchandra

    Hi,
    kindly check the following things-:
    Material master -: Purchasing View tick in check box of Batch Management
                               MRP 2 -:Batch Entry(Select 3-Auto Batch entry on Release)
                              Work Scheduling -: Batch Entry & Batch Management.
    hope it will help you to get the auto Batch Number.
    Regards,
    Mukesh

  • Batch Determination in time of Goods Issue

    Hi,
    We are doing internally numbered Batches. We got 4 btches say A- 10kg,B- 10Kg,  C- 10Kg, D- 10kg.
    I want to issue 30kg, at this time I want to select Batches automatically by the system which has stock thru FIFO. So that system will create 3 lines aautomatically & select batch accordingly. Is it possible.
    I saw Batch determinationin SPRO. I did all settings. consider, table, access sequence, procedure. Then make condition in MBC1 for movt. type, plant, material combination.
    When I am making isuue thru MB1A , it is not picking. How to do it ?
    RegardsBatch Determination in time of Goods Issue

    Hi
    Batch determination will not be able to determine 3 lines.
    If you enter three lines in MB1A then batches will be determined based on FIFO method.
    System cannot by itslef create three lines of 10.
    If the same was for any automatic movement such as GI for sales order then this may be possible.
    Thanks & Regards
    Kishore

  • Auto Batch Determination For Stock Transport Order/Replenishment Delivery

    All,
    I have an issue with my stock replenishment deliveries (STPO, Stock Transfer Plant to Plant via standard MRP/Procurement process with a Purchase Order that is a Stock Transport Order).
    One question I have is what module should the configuration be for Auto Batch Determination on deliveries from STPO's, is it SD or MM? The reason I ask is because I have the SD side working just fine for example if I enter a customer order for this material and issue a delivery against it I get a batch automatically assigned according to your search/sort criteria. I know with a Stock Transport you have different item categories etc. and I have flagged them as relevant for ABD.
    I have been racking my brain regarding this and I have went through the configuration for both Inventory Management and Sales and Distribution. I have went through the steps several times. I am not seeing what I am missing any help in this arena would be helpful I am getting the following error message when I go to the batch tab on the replenishment delivery "Batch determination is not possible because there is no search procedure". I am at a loss to what configuration is needed. I keep going through the steps and I am not finding whats missing. Any help in this area would be most grateful.
    Thanks,
    Jeremy

    Hi Jeremy,
    you need to configure batch determination in SD and maintain enteries in the trasaction code V/C5 as below
    Sales org + Distribution channel + Division + DL (in salesDoc Ty) + Search procedure + tick check batch
    Sales org + Distribution channel + Division + NL (in salesDoc Ty) + Search procedure + tick check batch
    also check whether the delivery item category is active for auto. batch determination and maintain the batch condition record in transaction code VCH1
    regards,
    Santosh

  • Automatic batch determination for components in order confirmations

    Hi all,
    when I am doing confirmations through CO12, for some of the components the batch is picked up automatically. But for some other components, the batch is coming only when I manually select the component line and click on batch determination button below.
    Why is this difference? How can I get the batch automatically with out selecting the line and clicking manually on the batch determination button?
    Thanks in advance,
    Raghu

    Ravi,
    Before posting please do search in this forum because this topic has been discussed many times in past.
    Please check below links which could be helpful to you Automatic batch determination in process order
    http://www.sapsword.com/home/sap-batch-management/sap-batch-determination
    If you still have issues then please come back.
    Br
    KK

  • Automatic Batch determination in a production order

    Hi everyone:
    I need that the system proposes a batch number of the components when the order is release. I already configure the batch determination, and when I go to the components of the order, and select the line of the components and the bottom of batch determination, it works... but what I need is to make that procedure in a automatic way, when the orden is realease.
    Can anybody help me?, any ideas.
    Thanks a lot.

    Hello Maria
    The setting from transaction OPKP is not relevant for this issue.
    This setting is only relevant to the creation of batches for the finished product, not for the components.
    It is only necessary to set the field on the material master, as I pointed on my first reply.
    BR
    Caetano

  • Batch determination issue in process order Material quantity calculation

    Dear Gurus,
    We are facing issue in auto batch determination in process order (Material quantity calculation ).
    eg Material X  is active material 200 KIA used in BOM as
    10  X   200  KIA  
    20  Y   10           Filler
    30  Z
    40  X   200  KIA
    50  Y
    60  Z
    We select line item 10 and 40 and do Batch determination system proposes 2 batches for line item 10 as Batch A and B
    and for line 40 again Batch A (with 0.01 KIA) and batch B proposed which is wrong.
    For line Item 10 Batch A and B
    For line Item 40 Batch B and C or as per FIFO logic.
    As Batch A should be consumed in Line item 10 then it proposed Batch B and so on....
    We have already maintain data in COB1.
    Can any body explain what is wrong in determination.
    Regards,
    J.H.Pert

    Hi Pert,
    Follow the below link you have some idea OK.
    Any questions revert me back.
    Batch search strategy
    Regards,
    Madhu.G

  • Error in manual batch determination while creating process order

    Hi Expert,
    Manual batch determination is happening for some of material and for some material it is working firne  when creating process order,
    Pleae assist
    Thanks
    Intekhab

    Dear,
    please open this prd order in change mode CO02 then press tab button cost calculation near release button in order header screen now do not save this order go to edit >log> cost calculation
    There it will show the error tht occured during costing
    Please refer this thread,
    Cost error when saving production oredr
    Regards,
    R.Brahmankar

Maybe you are looking for