Batch Determination Error in SD

Hi All,
I am getting an error while activating the Batch Management Box under Sales:general/Plant while creating MM01.The error is Batch Management requirement cannot be changed;Choose "Display errors".Can Anybody help me out on this
Best Wishes
Sree

Hi Sree,
For an existing Material, for which already GR done will throw the error, if you put Batch Management relevent Tick.
For a newly created material system will not give any message of this sort..
Pl. inform us the error message for the new material then we will be in a position to proceed further with the discussion..
Regards,
Siva

Similar Messages

BDC FOR VL02N FOR Batch DETERMINATION --ERROR IN BACKGROUND

HI,
I am running a BDC in Background Mode for VL02N Transaction for Batch Determination. When i run this BDC in Foreground its working Fine, But when i use Background Mode its not working.
Error in Messtab : LIPS-POSNR(1).
Flow is like : Vl02n - enter delivery..then select a material in that delivery and click on batchdetermination.
So its giving me error in LIPS-POSNR(1).
Can u suggest something..
Thanxs
RISHI

Hi,
Check whether proper ok-code has been assigned to the line to be selected in back ground, in foreground as there is always a manual intervention,we will never come to know these kind of trivial issues,
Rgds,

Component batch determination : Error

Dear Experts ,
We are in process of upgradation to ECC 6.0 and while doing unit testing of production order cycle while doing component batch determination i am facing a Runtime error .Has any body gone through upgradation phase and come across such error .If so plz guide me regarding it .
Regards
W>A

Hi Waaseem,
Post the error shown by SAP ... then we can suggest something.. Apart from this please check that in older version was there any exit or custom development was used for the batch determination. Sometimes during SPDD & SPAU in upgradation we miss some object which causes this type of issues
Thanks
Kaushik

Batch determination error

Hi All,
        While posting the goods issue(PGI) i am facing the following error
5C\QError E     VU 010 Document is incomplete: You cannot post goods movement 35\QLong text exists 0,000
5C\QError E     VL 605 10 The batches are not defined for delivery item 000010 5F\QNo long text exists BA-6001 Test - BA 1,000 PC
5C\QError E     IO 206 10 Item 000010 requires exactly 1 serial numbers for the asset 5F\QNo long text exists BA-6001 Test - BA 1,000 PC
5C\QError E     VU 010 10 Document is incomplete: You cannot post goods movement 35\QLong text exists BA-6001 Test - BA 1,000 PC
Here batch determination should happen automatically with serial nos generated at the time of goods receipt.
I have checked the batch configuration, where in i have not noticed any configuration missing.
Kindly help me out in resolving this issue.
Thanks,
Swamy H P

Hi,
Thank u very much for the reply
When we see the Incomplete status in Delivery following message i am getting
Item (SD) 10
Item (SD) 10
Short Description Batches / valuation types not completely allocated
General X
Goods mvmt posting X
Incompletion procedure L1
Tables V50UC
Field name BTREF
Screen CHSP_T
Status group D8
Processing sequence 9999
Thanks,
Swamy H P

Batch determination in sto

Hi
we are maintaing manuval batch determination in delivery level,
but at the time of doing STO, we do automatic delivery(VL10b) at that time we are getting automatic batch determination error.
what is the solution for this please explain.
thank u

Dear Srinivas,
Go through this IMG path and check is there any settings activated related to the automatic batch determination.
If automatic batch determination is activated deactivate that then check.
Path is
IMG>Logistics general>Batch management>Batch determination and batch check>Activate automatic batch determination in SD
I hope it will help you
Regards,
Murali.

Error in manual batch determination while creating process order

Hi Expert,
Manual batch determination is happening for some of material and for some material it is working firne when creating process order,
Pleae assist
Thanks
Intekhab

Dear,
please open this prd order in change mode CO02 then press tab button cost calculation near release button in order header screen now do not save this order go to edit >log> cost calculation
There it will show the error tht occured during costing
Please refer this thread,
Cost error when saving production oredr
Regards,
R.Brahmankar

Error during batch determination in sales order

Hi all,
I have this information error during batch determination: LB059 " Error when mixing configuration and selection criteria" .
Does anyone know what i´m doing wrong?
We are using materials with characteristics, and when i try the batch determination in a sales order, i got this messagge.
Thank you all!!

Hello Juan
The characteristics you used to configure the product in the sales order are passed dynamically during run time as selection criteria to determine a matching class and that's where the problem is happening.
Sit with an ABAPer to debug and find out what's the issue. Your focus for this activity should be on the following includes to Program SAPLV01F:
LV01FFC1
and
LV01FM01
More specifically, test the following Function Modules with your live data to figure out which one is failing:
CLO0_DDB_OBJ_VALUATION_OPEN
CTMS_DDB_HAS_CHARACTERISTICS
CTMS_DDB_HAS_VALUES
CTMS_DDB_DEL_VALUE
CTMS_DDB_SET_VALUE_INTERNAL
CLO0_DDB_OBJ_VALUATION_CLOSE
Hope this helps. Sorry it is hard to give a functional type of response to this very technical issue.

Error in Batch determination in STO delivery

Hello Gurus,
When i m doing batch determination in STO delivery, system is throwing error "Batch determination is not possible because there is no search procedure."
I think search procedure is assigned to sales doc types. Please correct me if i m wrong. This is working fine in case of normal sales cycle(Order-delivery-Billing). As the scenario is STO, the delivery is made against PO so this should not be reason for this error.
Also i have maintained Auto batch deter. at delivery item category level, but still getting the same error.
Please advice.
Thanks in advance,
Kind regards

All,
I have the same issue with my stock replenishment deliveries. One question I have is what module should the configuration be for Auto Batch Determination on deliveries from STPO's, is it SD or MM? The reason I ask is because I have the SD side working just fine for example if I enter a customer order for this material and issue a delivery against it I get a batch automatically assigned according to your search/sort criteria. I know with a Stock Transport you have different item categories etc. and I have flagged them as relevant for ABD. I have been racking my brain regarding this and I have went through the configuration for both Inventory Management and Sales and Distribution. I have went through the steps several times. I am not seeing what I am missing any help in this arena would be helpful I am getting the following error message when I go to the batch tab on the replenishment delivery "Batch determination is not possible because there is no search procedure". I am at a loss to what configuration is needed. I keep going through the steps and I am not finding whats missing. Any help in this area would be most grateful.
Thanks,
Jeremy

Error In Batch Determination

Hello,
I have configured Batch Determination Only for Inventory Management as follows:
-Created Characteristic for SLED
-Class
-Sort Sequence
And assigned them in "Startegy type"
-Strategy Type was created (from copying Standard)
and assigned to "Search Procedure"
This search procedure is assignd to Movement type
Defination of Initial Batch creation for Movement Type is also maintained as - Automatic/manual without Chk.
Batch Classification for Goods movement is activated for MvT- 101 & 561
with indicator 3.
Classification is also maintained in Material Master
Still getting WARNING message while doing Goods Reciept using MvT-561
as follows:
{ Invalid batch according to selection criteria in batch determination
Message no. LB051
Diagnosis:
This batch is not allowed according to the selection criteria assigned to it. The specifications for the batch entered do not match the selection criteria from batch determination.
Procedure:
Check selection criteria for the Transaction}
I just want to determine batches on their SLED
So that when i will issue this batch tht time i can find batch according to shortest SLED.
Can anybody help me????
Thanks
Kant

Hi,
Configuration Steps
- Define Inventory management Condition - T.code is OMA1 (Optional)
- Define Acess Sequence (SPRO --> Logistic General ---> Batch management ---> Batch Determination and batch check ---> Access Sequences --> Define Inventory Management Access Sequences (Optional)
- Define Strategy Type :- Logistic General ---> Batch management ---> Batch Determination and batch check --->Strategy Types ---> Define Inventory Management Strategy Types
- Define Batch Search Procedure :- Logistic General ---> Batch management ---> Batch Determination and batch check ->Batch Search Procedure Definition--> Define Inventory Management Search Procedure
- Batch Search Procedure Allocation and Check Activation - T.code OMCG
Now in this T. code if you activate check box for Check Batch then system will throw an
error or warning massage in case of wrong Batch Assignment during Manual Batch allocation.
And I think you are finding the same error (LB051) Correct?
Prerequisites at Master Level
- Material Should be batch managed.
- Batch Class with Characteristic LOBM_VFDAT should be maintained in Material Master
- Create Sort Rule with T.code CU70 (FEFO - First expire First Out)and assign Characteristic LOBM_VFDAT with Ascending rule.
- Create Batch Search Strategy using T.code MBC1 and assign above created Sort rule and batch Class to it.
and if you want to allow more than batches in case of Sort qty then assign no. Batch Spli(Max. allow batch Split is 999)
- Most Important Shelf Life Data should be maintain in all the concern Batches.
Regards,
Dhaval

Error in automatic batch determination in delivery

Hello Experts,
I have an outbound delivery created for a STO.
The issue is the batch is not getting detected automatically in the delivery and i have to manually enter the batch.
I have checked in SPRO and automatic batch determination is activated for delivery item category.
Can anyone please guid what further i need check to have the batch being automatically detected.
Thanks.

Hi Nish,
Since the delivery is related to STO, pls check the following config settings.
1. spro-->logistics general->batchmanagement->batach der and batch check->batch search procedure
allocation and check activation->allocate sd procedure/activate check.
(Before performing the below steps define the strategy type and assign the strategy type to procedure)
SLSORGDCDIVDOCTYPESEARCHPRO+CHECKBATCH
10001010DLSD0001+X
10001010nlSD0001+X
2. Activate automatiic batch determination in SD-> auto Batch determination for deliveryitem categories
        NLN
        NLC
3. Check the delivery item cat determination for batch split.T.code:0184
     nlccnormuln
     nlccnormchsp+nln
     nlnormuln
    nlnormchsp+nlc.
4.Now maintain the strategy type Ex:SD01 with VCH1 T.code along with your own sort rule.
These above config settings should satisfy your needs.
Regards,
Satish
Edited by: Satheesh on Jun 11, 2009 5:24 PM

Batch Determination/Splitting Error

Unable to issue goods (DO) due to materials not having enough quantity for specific batch. Upon viewing the batch determination of the material there is available quantity of that specific material.

Hi,
Goto Tcode MSC2N enter ur material and the batch no. and plant u r sing in ur sales order .
check there is two radio buttons in Basic data 1 tab . If the radio button of Batch restricted is checked please uncheck the same -> save it and try again .
if radio button of unrestricted is check , please check enough stock is there in that perticular batch in that perticular plant for a perticular material .
If not please create stock in Tcode MB1C Movment type 561 .
Hope this help

Issues during Component Batch Determination for Process Orders

Hi,
I am encountering a strange issue during component batch determination of process order.
1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
"Log cannot be saved: Object/subobject not specified"
Message no. BL201
*Diagnosis
Log save cancelled because at least one log contains no object or subobject.
Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
Procedure for System Administration
Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
The possible values for object and sub object must be configured in transaction SLG0.*
If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
Again when the order is in REL status and do the determination, It gives the same error.
This happens only for a specific plant, In other plants batch determination works in all scenarios.
I checked for all plant related Config for batch determination and coudn't find any discrepancies.
Please advise how to resolve this issue. Thanks in advance for your help
Regards,
Aheesh

There Is no direct solution for your requirement just try this work around.
While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code ) make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
Regards,
Ajay Nikte

Batch determination in SD

Hi,
Batch determination setup for SD in spro:
1 - At SalesAreaTie to Batch Determination Schema
LG=>BatchMgmt=>BatchDetermination&BatchCheck=>BatchSearchProcedureAllocation&CheckActivation=>AllocateSDSearchProcedure/ActivateCheck.
2 - At Sales Item Category activate auto batch determ
LG=>BatchMgmt=>BatchDetermination&BatchCheck=>BatchSearchProcedureAllocation&CheckActivation=>ActivateAutomaticBatchDeterminationInSD=>Automatic Batch Determination for Sales Order Items
3 - At Delivery Item Category activate auto batch determ
LG=>BatchMgmt=>BatchDetermination&BatchCheck=>BatchSearchProcedureAllocation&CheckActivation=>ActivateAutomaticBatchDeterminationInSD=>Activate Automatic Batch Determination for Delivery Item Categories
With regards to the above SPRO setup, may I know the following question?
I notice that my sales org is not being assigned to a batch determination search procedure on the no.1 table setup. However, item category for sales and delivery are being flagged in no. 2 and no. 3 with Auto Batch Determination.
Thus, when I create a sales order of my sales org, however, using item category which have been activated with batch determination; In such case, will the batch determination mechanism still take place in the sales order creation?
Thanks
Tuff

Dear tuffy
With out the batch search procedure assignment to your sales area batch determination will not be done in your sales document or delivery documnet.
System will give the error "Batch determination is not possible because there is no search procedure".
Though you have flagged the respective item categories relevant for batch determination, Determination will not be done with out assigning the search procedure to your sales area.
Please check and revert if you have any further clarifications.
Thanks&Regards
Raghu.k

Batch Determination with WM manual staging

Hello,
I found documentation that suggest to use Pick parts when using batch determination with WM in transfer orders. However will/can determination be used with Manually staged components inducator 4?
Thank you

Hi!
I am trying to get batched with shelf life larger than 370.
We are in ECC6.0 and the note applies to releases up to 4.5. I read the note and also tried it but the characteristic does not take a range; only a numberic value. For => 370 I get an error. The date for SLED calculated for batch determination (from the batch determination analysis for a test) as shown below:
Characteristic   Name                           Characteristic value
LOBM_ZUSTD       Status of Batch                Released
LOBM_LVORM       Deletion Ind. for Batches      Not Set
LOBM_RLZ         Remaining Shelf Life for Batc 370 d
LOBM_MBDAT       Material Availability Date     07/17/2008
LOBM_LFDAT       Batch Determin. Delivery Date 07/30/2008
LOBM_VFDAT       Expiration date, shelf life    08/04/2009
I wonder if the problem is that the operator does not seem to appear in this criteria for the calculated LOBM_VFDAT?
Thank you

Batch determination and BAPI_GOODSMVT_CREATE

Hi experts!
I'm new to batch determination and I'm facing an issue. I've set up a batch determination configuration and it works fine when I post a goods movement in dialog process (MB11) entering * in the batch field.
Now I'm trying to do the same with BAPI_GOODSMVT_CREATE, but if I enter * in the batch parameter I get an error message M7116: "The storage location/batch function * is not defined here". If I leave it blank i get the error message "Enter batch".
Hope somebody has any clue.
Thanks
Fabio Scaravelli

Hi Fabio,
I'm facing the same problem. Did you get a solution to this problem? Please let me know.
Thanks.

Batch Determination Error in SD

Similar Messages

Maybe you are looking for