Batch determination for deliveries

Dear friends,
we have recently introduced batch determination for sto's. We are facing a poblem, we were suppose to get the batches only from one storage location, but system is taking batches from all storage locations where ever available according to search criteria. How can we restrict batches only from one storage location.
Thanks in advance.
Regards,
Sri.

Hi,
If u want to restrict batches on storage location level, then
You have to create CONDITION TABLE in that select field catlog STRORAGE LOCATION,
Assign this created table in ACCESS SEQUENCE,
Then asign this access sequence in STRATEGY TYPE which u r using.
Maintain condition records for Batch search strategy with key combination STORAGE LOCATION.
Note : if when creating condition table field catlog is not available for storage location, then you can add in that with the help of ABAPer.
Kapil

Similar Messages

  • Auto Batch Determination For Stock Transport Order/Replenishment Delivery

    All,
    I have an issue with my stock replenishment deliveries (STPO, Stock Transfer Plant to Plant via standard MRP/Procurement process with a Purchase Order that is a Stock Transport Order).
    One question I have is what module should the configuration be for Auto Batch Determination on deliveries from STPO's, is it SD or MM? The reason I ask is because I have the SD side working just fine for example if I enter a customer order for this material and issue a delivery against it I get a batch automatically assigned according to your search/sort criteria. I know with a Stock Transport you have different item categories etc. and I have flagged them as relevant for ABD.
    I have been racking my brain regarding this and I have went through the configuration for both Inventory Management and Sales and Distribution. I have went through the steps several times. I am not seeing what I am missing any help in this arena would be helpful I am getting the following error message when I go to the batch tab on the replenishment delivery "Batch determination is not possible because there is no search procedure". I am at a loss to what configuration is needed. I keep going through the steps and I am not finding whats missing. Any help in this area would be most grateful.
    Thanks,
    Jeremy

    Hi Jeremy,
    you need to configure batch determination in SD and maintain enteries in the trasaction code V/C5 as below
    Sales org + Distribution channel + Division + DL (in salesDoc Ty) + Search procedure + tick check batch
    Sales org + Distribution channel + Division + NL (in salesDoc Ty) + Search procedure + tick check batch
    also check whether the delivery item category is active for auto. batch determination and maintain the batch condition record in transaction code VCH1
    regards,
    Santosh

  • Assign Search procedure for batch determination for delivery

    Hi all,
    i have a problem with automatic batch determiantion during delivery creation.
    i have created a transfer order (purchasing order type UB from one plant to
    another).
    i have created delivery. Batch determination is impossible because the sistem
    didn't find search procedure.
    But if i create a sales order and subsequent delivery the batch determination is
    carried out correctly.
    in customizing i found the transaction in which we have to assign for a
    particular sales organization and sales document a search procedure ("Allocate
    SD Search procedure/ activate check")and i created the correct items for my
    sales document.
    My question is: where can i assign a search procedure to a delivery without
    sales order reference?
    In customizing i have activated "Automatic batch determination for my Delivery
    item category" but the sistem didn't find search procedure.
    What's wrong?
    Thanks
    Veronica

    Hi Veronica,
    For deliveries without reference to a sales order you still need to define a default order type for the delivery type - this will provide the control criteria that is normally copied from the sales document header into the delivery document.
    In our system our replenishment delivery type is the standard NL and the Default ord. ty. is set to DL, which I think is the standard SAP setting.
    Give this a try.
    Regards,
    Monika Strasser

  • Batch Creation or Batch Determination for 531 movement type

    Dear Experts,
    I have some confusion with Movement type 531 -
    1) Can we do Batch determination for 531 movement type.
    2)  Can we do the automatic Batch creation at the production order level or confirmation level. In this case i have done the settings but in confirmation screen i have to create batch manually through Menu Path.
    3) I have to enter characteristics value manually in confirmation screen as i have select classify batches in foreground. But in material master we have Batch Class type so can values comes from there to batch of confirmation screen.
    Thanks & Regards,
    Saurabh Kumar

    Hello
    Please read carefully notes 191368 and 194619. These are very old correction notes and they are already implemented on your system, however, they provide the following information about the system design:
    For a by-product or co-product, no batch determination is executed anymore. The subsequent stock determination is not executed anymore either.
    and
    No batch determination for by-products may be executed during the confirmation.
    It means that the batch determination for movemen 531 is not a functionality of the standard system.
    I have never tested this scenario, however, as far as I know, the batch can be created automatically for the by-product if you are using internal number range on OMCZ.
    BR
    Caetano

  • Problem in automatic batch determination for components in process order

    hi
    Ours is a process order industry. Here we prepare food items.
    We are entering manual batch for finished product. We want to perform automatic batch determination for one of the components raw material. For other packing material we do not want to maintain batches.
    The batch procedure picked is me0001 for 261 movement type instead of C00001.
    Because of that we need to enter batch manually.
    Send us the procedure to automatic batch determination for components.
    regards
    ravi

    Ravi,
    Before posting please do search in this forum because this topic has been discussed many times in past.
    Please check below links which could be helpful to you Automatic batch determination in process order
    http://www.sapsword.com/home/sap-batch-management/sap-batch-determination
    If you still have issues then please come back.
    Br
    KK

  • In backflushing, how to get batch determination for IM managed components.

    Hello friends,
    During confirmation, in Goods Movements screen, we get auto batch determination for WM managed components (based on their control cycle record).  However, we are NOT getting auto batch determination for IM managed components.
    We have created batch selection/sort, and search strategy for Orders as well as Inventory Management.  We have also created condition records for the above IM managed components.  But still auto batch determination does not take place.
    Kindly help how to get auto batch determination of IM managed components during confirmation.  Thanks.
    - Chetan

    Hi Tajuddin, Prashob,
    I marked my query as "solved", but I need one clarification please:
    OSPX is a pre-requisite config to OPJ2.  In OSPX, we have selection for "sorting" by Item-Table, Price, & Quantity.  Can you please briefly explain how these 3 sorting is supposed to work ?  Thanks.
    - Chetan

  • Batch determination for STO

    Hi,
    How to configure batch determination for Stock transport orders?
    I just wanted to know to which business process we need to assign the search procedure

    Your first message:
    Hi,
    How to configure batch determination for Stock transport orders?
    I just wanted to know to which business process we need to assign the search procedure
    This was answered I think.
    Your second message:
    These settings are manitained. I have checked the lik you sent. I too get exactly the same error.
    You didn't speak about any error message in your first message nor (explicitly) in the second one.
    Regards,
    Csaba

  • Batch determination for a component material of a production order.

    I created a new production order type in SAP and I created a new production order from the new order type. When Iu2019m doing batch determination for a component material Iu2019m getting the error u201CBatch determination for 000000000002003610 without selection datau201D. I have to click [Selection criteria] and manually assign the selection criteria for the batch class.
    This is working properly for existing production orders and system automatically picking up the selection criteria.
    Is there any place in configuration to assign new production order type to batch selection criteria or how can I overcome this.

    Hi,
    Will you share steps you have completed so far for doing for Batch Determination?
    It will help us to find the missing part..
    - Check all the Batch Characteristic values are maintain in the Batches.If values are missing then also Determination will not take place.
    - Check whether you have maintain Sort rule to Batch Determination strategy or not
    Regards,
    Dhaval

  • Automatic batch determination for quality inspection stock

    Hello, gurus.
    Could you please, help me with the following problem: I have received on the certain storage location some quantity of material maintained in batches into quality inspection stock with 501 movement type. Now I would like to make reverse posting, but I do not want to use cancellation of the document, I need to use 502 movement type and determine batch from quality inspection stock with automatic batch determination in MIGO transaction. I assigned Batch search procedure to 502 movement type and created all necessary condition records. I use Checking Group for Availability Check ‘CH’ and Checking Rule for Availability Check ‘03’ where I include quality inspection stock. However no batch can be determined. But if I use 331 movement type, everything is OK, the batch is determined without any problems. If I manually put batch and valuation type for the material, the system shows no error.
    Why it is not possible to do automatic batch determination for quality inspection stock then?

    OK, let us talk abou it. I check it in my system, actually 502 can work, but I can't trigger BM determination by 501. Maybe BM determination onlys to select some existing batches for consumption. For 501 in my pratice I can select all the existing batches to be added or just add a new batch.

  • Automatic Batch determination for Replenishment delivery

    Hi there,
    Is there a way to determine batch automatically for replenishment delivery?
    Whenever I create replenishment delivery, batch should be determined automatically. For that I activated automatic batch determination for SD documents (Delivery Item Category NLN)...
    Still I couldn't solve my problem...
    Suggestions from everyone are most welcome...
    Regards,
    Geetha

    Hello Geetha,
    You need to carry out configuration for seach procedure under SPRO-> Log Gen -> Batch management -> Batch search procedure definition -> Define Sales and Distribution Search Procedure
    The help text from that node is as follow:
    Define Sales and Distribution Search Procedure
         In this step, you define search procedures for batch determination in Sales and Distribution.
         Each search procedure comprises all strategy types that can be used for a particular combination of sales area and sales document type.
         Requirements
         To be able to define search procedures, you must have defined the necessary strategy types.
         Standard settings
         The standard SAP R/3 System contains search procedure SD0001.
         Activities
         To create a search procedure, proceed as follows:
         1.  Select New entries, and enter a six digit key beginning with "Z" as well as a name for the search procedure.
         2.  Select Control and then New entries, and enter the strategy types in the desired sequence.

  • Batch determination for subcontract orders in MIGO

    Hi,
    I have a doubt. I´ve customized a batch determination strategy for Inventory Management, for movement type 543.
    When i receive a subcontract order, using transaction MIGO, the batch determination process is NOT triggered automatically, until i press button "Stock Determination".
    Is there a way to determine batches in MIGO without pressing this button? (fully automatic).
    Best regards.

    Hello Alejandro,
    Thanks for the further clarification!
    It depends on how you are processing the goods receipt in MIGO:
    .- If you post the Goods Receipt for the Subcontracting purchase order and you do not expand the components, then just flag the main item and post, an automatic batch determination for the batch component will be processed then by the system and the goods receipt will be processed.
    .- If you post the Goods Receipt for the Subcontracting purchase order and you expand the components, then, the batch field will be opened for input and the user manually will need to start the process pressing the icon for the batch determination (or also the one for the stock determination).
    I hope this helps!
    Esther

  • FEFO logic in batch determination for process order release

    Batch determination for a particular material in a process order was following FIFO logic . We needed to change it to FEFO hence we made the necessory changes in COB1 how ever the process order relase is still taking the batch whihs is not the first expiry batch
    Kindly help in batch determination with FEFO for process order release.

    Rk
    The blw explation for inventory side, i don't have idea for prod order side
    If Batch Management is active for the materials then use following process;
    First create characteristic in CT04 for Batch Creation Date, under "Addnl data", enter Table Name MCH1 or MCHA (As per Batch Class 022 or 023) and Field ERSDA and save it.
    Assign this characteristics in CL02 in your Batch Class.
    CU70 - Create a Sort Rule and specify the Characteristic of Batch Creation Date and activate "Ascending" indicator.
    Now assign the Sort Rule in MBC1 and keep Selection criteria as "O" for the Strategy type.
    Now do batch determination in MIGO.

  • Batch determination for subcontract purchase order component.

    Hello
    Is it possible to do batch determination for the subcontract purchase order componet, then bring the component batch to the outbound delivery directly from purchase order?   If no standard, any user exit or BADI... can do this also good for us.
    Thanks
    Hailiang

    Hi
    Yes I can manual input batch number, but I want the system select the batch in stock base on the batch classification.  I can not find the batch determination function the the component detail screen.
    Best Regards
    Hailiang

  • Batch Determination for Partial deliveries

    Hello,
    I have this issue when creating a delivery for Sales Order. I have multiple line items in sales order and when i try to create the delivery, the automatic batch determination doesn't work for the line items with partial quantity and hence no automatic transfer order won't be created for that.
    Is there a solution to let the system create a batch for the items with partial quantity if it meets the batch selection criteria.
    Please reply, Thank you.

    HI,
    Check this PDF file for the complete process it may help you
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0caed4a-40f9-2c10-349a-96ec617a8161?QuickLink=index&overridelayout=true
    Edited by: redriver on Dec 7, 2011 5:39 PM

  • Batch determination for STO delivery

    Hi,
    I created delivery via VL10B for inter company STO.  When trying to do batch determination, no search procedure found. Where do we assign batch search procedure for Inter company deliveries?

    HI
    This question has been answered already. Please see the below link. It will help you
    Re: Batch Determination in Stock Transport Order & subsequent Delivery
    Regards
    Antony

Maybe you are looking for