Batch determination in sto

Hi
we are maintaing manuval batch determination in delivery level,
but at the time of doing STO, we do automatic delivery(VL10b) at that time we are getting automatic batch determination error.
what is the solution for this please explain.
thank u

Dear Srinivas,
Go through this IMG path and check is there any settings activated related to the automatic batch determination.
If automatic batch determination is activated deactivate that then check.
Path is
IMG>Logistics general>Batch management>Batch determination and batch check>Activate automatic batch determination in SD
I hope it will help you
Regards,
Murali.

Similar Messages

Error in Batch determination in STO delivery

Hello Gurus,
When i m doing batch determination in STO delivery, system is throwing error "Batch determination is not possible because there is no search procedure."
I think search procedure is assigned to sales doc types. Please correct me if i m wrong. This is working fine in case of normal sales cycle(Order-delivery-Billing). As the scenario is STO, the delivery is made against PO so this should not be reason for this error.
Also i have maintained Auto batch deter. at delivery item category level, but still getting the same error.
Please advice.
Thanks in advance,
Kind regards

All,
I have the same issue with my stock replenishment deliveries. One question I have is what module should the configuration be for Auto Batch Determination on deliveries from STPO's, is it SD or MM? The reason I ask is because I have the SD side working just fine for example if I enter a customer order for this material and issue a delivery against it I get a batch automatically assigned according to your search/sort criteria. I know with a Stock Transport you have different item categories etc. and I have flagged them as relevant for ABD. I have been racking my brain regarding this and I have went through the configuration for both Inventory Management and Sales and Distribution. I have went through the steps several times. I am not seeing what I am missing any help in this arena would be helpful I am getting the following error message when I go to the batch tab on the replenishment delivery "Batch determination is not possible because there is no search procedure". I am at a loss to what configuration is needed. I keep going through the steps and I am not finding whats missing. Any help in this area would be most grateful.
Thanks,
Jeremy

Automatic Batch Determination in STO Delivery

Hi All..
I am working with STO scenario..n Automatic Batch determination for STO deivery with STO delvry item category NLN.
I have done required settings for auto Batch Dtrmntn in delvery .
But as I create Del Doc thru VL10B, itz not giving me Auto Batch Detrmn in the Del Doc...?
where might I Have gone wrong..?
Wat are the settings required for Auto Batch Detrmn for Del Item Categry NLN..??
please guide me at the earliest...
With regards,
LN
Bangalore

Hi,
Check the OSS note 44225. The detail is,
Summary
Symptom
The automatic batch determination in the subsequent document (replenishment delivery note) for the stock transport order does not run or runs incorrectly although automatic batch determination is activated for the item.
Additional key words
Batch search plan, strategy types, stock transfer
Cause and prerequisites
A batch search plan cannot be assigned to the delivery type replenishment delivery (for example NL).
Solution
Assign a default sales order type (for example DL) to the delivery type for the replenishment delivery (for example NL) (field TVLK-DAART). You can now assign the correct search plan to this sales order type.
Regards

Batch determination for STO delivery

Hi,
I created delivery via VL10B for inter company STO. When trying to do batch determination, no search procedure found. Where do we assign batch search procedure for Inter company deliveries?

HI
This question has been answered already. Please see the below link. It will help you
Re: Batch Determination in Stock Transport Order & subsequent Delivery
Regards
Antony

Batch determination for STO

Hi,
How to configure batch determination for Stock transport orders?
I just wanted to know to which business process we need to assign the search procedure

Your first message:
Hi,
How to configure batch determination for Stock transport orders?
I just wanted to know to which business process we need to assign the search procedure
This was answered I think.
Your second message:
These settings are manitained. I have checked the lik you sent. I too get exactly the same error.
You didn't speak about any error message in your first message nor (explicitly) in the second one.
Regards,
Csaba

Batch determination for deliveries

Dear friends,
we have recently introduced batch determination for sto's. We are facing a poblem, we were suppose to get the batches only from one storage location, but system is taking batches from all storage locations where ever available according to search criteria. How can we restrict batches only from one storage location.
Thanks in advance.
Regards,
Sri.

Hi,
If u want to restrict batches on storage location level, then
You have to create CONDITION TABLE in that select field catlog STRORAGE LOCATION,
Assign this created table in ACCESS SEQUENCE,
Then asign this access sequence in STRATEGY TYPE which u r using.
Maintain condition records for Batch search strategy with key combination STORAGE LOCATION.
Note : if when creating condition table field catlog is not available for storage location, then you can add in that with the help of ABAPer.
Kapil

Automatic batch determination problem in STO- Replenishment delivery

Hi all,
After doing the Stock transport order, in replenishment delievry batches are not getting determined auomatically. I've done all the required settings for automatci batch determination incuing itemcategory determination everything, but then automatic determination is not happening. Please advise.

Goto the Batch Split screen ---> Batch Determination
Check the following:
1) Strategy Analysis - Make sure your batch condition record is being pickedup.
2) Strategy Info - make sure 'selection defined' is checked up. No of batch split should be 999.
3) Selection criteria should pick up the characterstic you have defined for batch determination.

Automatic Batch Determination prior to Picking in outbound delivery

Hi everyone,
My client currently wants to activate automatic batch determination. The main concern is that once the delivery is created, the picking can happen 2-3 weeks after the delivery. So in this case, they do not want batch determination during outbound delivery. They want to run the batch determination prior to Picking process. Is there a standard process to do this?
In addition, for batch determination, if it in an internal customer, it should take LIFO process and if it is external customer then FIFO process. Also if it is STO then it should take LIFO process. Does someone know how to control this
Thanks

Hi
Do it in the SO. In SM30 for V_TVAP_CH, set what the type of items of SO are determined for. For STO, do it for NLN and NLC in the delivery items (SM30/V_TVLP_CH). Check your ATP settings and that during this time (2-3 weeks) the stock for this batch goes on for your customer.
I hope this helps you
Regards
Eduardo

Batch determination cannot pick batch

Dear SAP gurus,
We are in SAP ECC 6 EHP 7. We are using batch determination in Delivery and also availability check which include delivery item in the checking.
We have a scenario to transfer 1 pc of tock X from plant A to plant B then to plant C. We are creating STO 1 from plant A to plant B, and then STO 2 from plant B to plant C. STO 1 auto-create delivery 1 and STO 2 auto-create delivery 2. When STO/Delivery created, the stock situation for X is 10 pcs in plant A, 0 in plant B, and 0 in plant C.
When delivery 1 created, batch determination kick in, batch is determined. When delivery 2 created, because there is 0 stock in plant B, batch determination cannot determine any batch. At this time when we see stock requirement list of material X in plant B, there is -1 qty assigned to delivery 2.
After we issue stock X using delivery 1, the stock in plant A become 9, and stock in plant B become 1. Then we edit the delivery, re-trigger the batch determination in the hope now system can get the batch (because the stock already 1 now). But the problem is, it is NOT. It seems that before batch determination kick in, SAP is using availability check to determine whether there is any quantity can be commited to delivery 2. The problem is, because it thinks that planned available quantity is -1, it fails to commit the quantity, thus batch determination cannot kick in.
The weird thing is the planned availability check is -1 in the first place because the delivery 2 itself (!!) Health logic suggest that because I already order something in plant B, when the goods finally arrived in B, I should be able to pick this goods, but apparently it is NOT. I'm almost sure that the problem is in the availability check, as if I dont include delivery in the availability check, SAP able to commit 1 qty and then batch determination kicks in. But I cannot de-activate this, as we dont want Sales Order and DO commit to quantity that already book.
Is there something that I miss in here?
Best regards,
John

Hi,
Anyone have suggestion on this?

Error in automatic batch determination in delivery

Hello Experts,
I have an outbound delivery created for a STO.
The issue is the batch is not getting detected automatically in the delivery and i have to manually enter the batch.
I have checked in SPRO and automatic batch determination is activated for delivery item category.
Can anyone please guid what further i need check to have the batch being automatically detected.
Thanks.

Hi Nish,
Since the delivery is related to STO, pls check the following config settings.
1. spro-->logistics general->batchmanagement->batach der and batch check->batch search procedure
allocation and check activation->allocate sd procedure/activate check.
(Before performing the below steps define the strategy type and assign the strategy type to procedure)
SLSORGDCDIVDOCTYPESEARCHPRO+CHECKBATCH
10001010DLSD0001+X
10001010nlSD0001+X
2. Activate automatiic batch determination in SD-> auto Batch determination for deliveryitem categories
        NLN
        NLC
3. Check the delivery item cat determination for batch split.T.code:0184
     nlccnormuln
     nlccnormchsp+nln
     nlnormuln
    nlnormchsp+nlc.
4.Now maintain the strategy type Ex:SD01 with VCH1 T.code along with your own sort rule.
These above config settings should satisfy your needs.
Regards,
Satish
Edited by: Satheesh on Jun 11, 2009 5:24 PM

Issue with batch determination in delivery

Hi All,
I have an STO and when creating delivery via VL10I I get an error "doc is incomplete, you cannot save delivery". I have all the sufficient data in STo for delivery creation. Infact there should be batch strategy not taking place i guess.
When I enter batch number in STO then a delivery is created, why? batch shd be determined automatically when creating deliveries.
But there is no issue is quality system with same materials and plants I can create deliveries..

Hi,
Are you sure that the incompletion is because of Batch determination?
In that case goto
Spro> Log. general> Batch management> Batch determination and batch check> Activate automatic batch determination for delivery item
and flag Auto Batch det check box for Item category "NLN"
Hope this helps.
Regards,
sharan

Batch Determination during delivery

Hi All
While doing delivery for STO, system is giving a message "Batch determination is not possible because there is no search procedure"
But Batch determination is happening fine for all movements except STO Delivery.
is there any other settings required for STO Delivery (for inter and intra company codes) for batch determination.
Regards
M S K

Ok

Batch Determination While Goods Issue

How To Active batch Determination at the time of issue the goods
I have done following SPRO setting .
Strategy type --> YB01
Inventory managment Search Procedure --> YB001
Allocation IM Search Procedure -->> 261assigned to YB001 along with Active "Check batch"
In MBC1....for Search Startegy YB01 , for combination of Movement Type/Plant/Material ,materil assignement made as
material 40100
No. batch -999
Changed Allowed : Check
Uom : B
Mproposal : Active
Material Master of raw Material 40100
Material Master batch Management tick active
Classifcation view : Class As Shelf life
Characheirstics :Remaining Shelf Life
Now i have cretaed prodcution order of 10 qty ..
I have Four Batches With Differnt Life is available in Stock...
Now i want to see this Four batch at The time of Issue so that i can select one of the batch for issue..
Right now i m not getting Batch determination ..
What else i have to do ...
Please Guide..

Dear,
Have you created the sort rule in ACU70 with LOBM_VFDAT?
Have you assigned the sort rule in MBC1?
Also check Implementation Guide for R/3 Customizing (IMG)-- Logistics u2013 General-- Batch Management--Batch Determination and Batch Check -->Batch Search Procedure Allocation and Check ActivationAllocate IM Search Procedure/Activate Check
Assign for 261 mov type - YB0001.
Same need to assign in OPL8 also please try and come back.
Regards,
R.Brahmankar

Batch Determination at Storage location Level

Dear All,
I have one question on batches when I am entering stock against batches in Outbound Delivery Note (as batch split ) the batch determining the storage location is different not the one which it belongs to, I need the batch stock should be determine in same storage location not the different one.
For example: I have 5 storage locations, each storage location contain 5 to 6 batches;
Storage Location: WO1, WO2, WO3, W04 AND WO5
Batches: A1,B1,C1,D1,E1 etc.
Stor. Loc    Batches
1. W01:             B1, B2, B3, B4, B5, B6
2. W02:             A1, A2, A3, A4, A5
3. W03:             C1, C2, C3, C4, C5
4. W04:             D1, D2 D3, D4, D5
5. W05:             E1, E2, E3, E4, E5
I. If I enter B1 and stock 10kg then it automatically determining storage location as W02. Actually it belongs to storage location W01 it should be the same W01only
II. If I enter C1 and stock some 15kg then also it automatically determining storage location as W02. Actually it belongs to storage location W03 it should be the same W03.
Kindly give me the solution.
Thanks in advance
Regards,
MH

Clsing due to no reply

Issues during Component Batch Determination for Process Orders

Hi,
I am encountering a strange issue during component batch determination of process order.
1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
"Log cannot be saved: Object/subobject not specified"
Message no. BL201
*Diagnosis
Log save cancelled because at least one log contains no object or subobject.
Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
Procedure for System Administration
Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
The possible values for object and sub object must be configured in transaction SLG0.*
If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
Again when the order is in REL status and do the determination, It gives the same error.
This happens only for a specific plant, In other plants batch determination works in all scenarios.
I checked for all plant related Config for batch determination and coudn't find any discrepancies.
Please advise how to resolve this issue. Thanks in advance for your help
Regards,
Aheesh

There Is no direct solution for your requirement just try this work around.
While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code ) make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
Regards,
Ajay Nikte

Batch determination in sto

Similar Messages

Maybe you are looking for