Batch determination issue in process order Material quantity calculation

Dear Gurus,
We are facing issue in auto batch determination in process order (Material quantity calculation ).
eg Material X  is active material 200 KIA used in BOM as
10  X   200  KIA  
20  Y   10           Filler
30  Z
40  X   200  KIA
50  Y
60  Z
We select line item 10 and 40 and do Batch determination system proposes 2 batches for line item 10 as Batch A and B
and for line 40 again Batch A (with 0.01 KIA) and batch B proposed which is wrong.
For line Item 10 Batch A and B
For line Item 40 Batch B and C or as per FIFO logic.
As Batch A should be consumed in Line item 10 then it proposed Batch B and so on....
We have already maintain data in COB1.
Can any body explain what is wrong in determination.
Regards,
J.H.Pert

Hi Pert,
Follow the below link you have some idea OK.
Any questions revert me back.
Batch search strategy
Regards,
Madhu.G

Similar Messages

  • Error in manual batch determination while creating process order

    Hi Expert,
    Manual batch determination is happening for some of material and for some material it is working firne  when creating process order,
    Pleae assist
    Thanks
    Intekhab

    Dear,
    please open this prd order in change mode CO02 then press tab button cost calculation near release button in order header screen now do not save this order go to edit >log> cost calculation
    There it will show the error tht occured during costing
    Please refer this thread,
    Cost error when saving production oredr
    Regards,
    R.Brahmankar

  • Batch determination Problem in process orders

    Dear Friends,
    i am getting problem of BD for components in process order that the FIFO sequence is not
    showing.
    !. I have made settings like Strategy Plant/order type
    2. Charecteristic in the class and sort rule LOBM_VFDAT
    3.  Class assigned to materials.
    4.  raw materials batches have maintained Ex.date, date of produced(at the time of GR by 561)
    5. Order type i have assined search Proc.
    in the order strategy info showing sort rule correctly in theprocess order, But the sequence it showing
    is neither with GRn date or not with Exp date.
    kindly guess what might be the problem...
    Regards
    Robert

    Dear,
    For FIFO you can use the Characteristic  LOBM_LFDAT for FIFO if is LOBM_VFDAT then in plant storage data 1 view maintain the SELD then assign these Characteristic to class in CL02 then assign this calss to material master.
    Then craete sort rule in CU70 withCharacteristic  LOBM_LFDAT or LOBM_VFDAT
    then assign it to serch strategy in MBC1 or COB1 with selction criatoria.
    In OPL8 assign this serch procedure.
    Then create the order and check the result.
    Regards,
    R.Brahmankar

  • COR2- Process order material  quantity change

    Hi, I want to change the material quantity of process order with COR2 transaction, could you plese help me out in finding the bapi or function module which will be relevent.

    I have done it through BDC recording, change on first line, then upload using bdc from 2nd line.

  • Replace the component after batch determination in the process order.

    Hi dudes,
    How we can replace component for which batch determination done with a new component in a process order. can any body suggest if its possible.
    thanks in advance.
    Robert

    Hi,
    i am not able to delete the component in the materials overview after the batch allocation done by batch determination rather giving batch manually.
    i.e if i give batch directly in the batch field i can able to delete that entire component row, but if do batch determination for that component once its done i can't  able to delete.
    thanks in advance
    Robert.

  • Batch determination configuration for process order.

    Hi,
    Can anybody help me to configure batch determination for process order in step by step.
    My requirement is
    1. multiple selection of component in process order.
    2. click on batch determination icon.
    3. system will check batch, valuation type, stock. Assign batch,valuation type, storage location automatically in the process order confirmation(COR6N)-Goods movement tab.
    Thanks,
    Jishu

    Hi Jishu,
    Please refer below documents whcih will help you on batchdetermination
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09b7216-65da-2b10-bdb5-870cf9916350?QuickLink=index&…
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0caed4a-40f9-2c10-349a-96ec617a8161?QuickLink=index&…
    Regards,
    R.Brahmankar

  • Process Order Base Quantity calculation - WPL

    Hi,
    In COR2 when changing Total order quantity (Litres) (CAUFV-GAMNG) the Base quantity (Kgs) automatically re-calculates (CAUFV-BMENGE).
    As far as I can see this is calculated from the WPL found in the material master > additional data > units of measure e.g. 1000lts = 1255kgs.
    However if I create a process order it calcualtes with say 1.255 Kg/l, I then change the WPL in the material master, come back into the order and then change the Total order quantity. The base qty is still using the old WPL.
    My question is where does the base quantity calculation take the WPL from? If it does take it from the material master is there anyway of making the process order pick up the current WPL in the calculation and the not the previous one?
    thanks
    Tom

    Hi Pert,
    Follow the below link you have some idea OK.
    Any questions revert me back.
    Batch search strategy
    Regards,
    Madhu.G

  • Batch not updated in process order

    hi all,
                When i am doing batch determination and goods issue through coik pick list batch not update in process order. presently we are not doing batch determination in process order.after goods issue component batch fields are grey out in the process order

    HY,
    Batch field are filled only if you do Batch determiantion of components whether it is by auto or manual.And it is logical also becasue if you split the material qty. in more than one batches during goods issue( whether it is in COIK or in COR6N)then think what should be the case in Component screen in process order?
    As soon as you complete the Goods Issue This field becomes gray but the filled of Quanity withdrawn is update with qty you have withdraw.
    Regards
    Dhaval

  • Batch determination at time of order creation

    Dear All,
    When i am creating process order at the time system not allowing me to execute batch determaination after release only it is allowing me to do.
    My requirement is At the time of order creation i want assign batches ( Execute Batch Detrmination)for the material.
    how to do this one, kindly hel me
    Regards,
    s.sakthivel

    Craig- you are correct. That setting is about how to create a batch for the Material produced , does not have any impact on the batch determination for the raw materials consumed.
    I dont think there is a way to do the batch determination before releasing the order. The other option isto go for the automatic release of the order at creation - this option will carry out the batch determination automatically once an oder is created and order will be released. check with PP consultant on this.
    Hope it helps.
    Thanks,
    Ram

  • Display Process Order: Material List -- MRP Distribution Key fiels

    Hi,
    In Display Process Order: Material List, the field of "MRP Distribution Key (RESBD-VERTI or RESB-VERTI) is coming as editable field (Even in Display mode of process order). Is this is standard? Or some configuration is there to make it editable or non editable field even in Display mode of process order?
    Thanks & Regards,
    Surajit Das

    Hi,
    Do you mean BOM component of process order ?
    Deleted mark represent that this material will no longer be used in process order i .e . material will not be issued if it has deletion mark in process order.
    Deletion mark will only come if you delete a component after releasing order. If you delete a component before release then it will not be visible as BOM component of process order.
    Vishal

  • Batch reservation & Allocation in process order

    I am allocating batch to process order components(for active ingridient)While I am allocating the batch I am able to select the batch which has all of its quantity reserved,which is not desireble.Any solutions please??/
    Eg.In MMBE my batch stock(say for batch AA11) is as follows:Unres stck 100 & reserves 100
    If I am determing batch for a different process order where this component is used,I am able to select the same batch,even though it has no open quantities.
    Please suggest

    Hi Rele,
    Please check in CO09 transaction for the availability of this batch stock whether it is free or confirmed to any other component like.
    Regards
    R. Senthil Mareeswaran.

  • Process Order Confirmation Quantity from Preceeding Operation

    Hi All,
    Please can you let me know if the below requirement can be met:
    I have 2 phases to confirm (both are milestone confirmations). The Process order header quantity is 100 kg. While doing the confirmation for Phase 1, I do a final confirmation  for 90 kg. Now while doing the confirmation for Phase 2, the system still populates the default yield as 100 kg and not 90 kg.
    Is there a way to display 90 kg as default yield for Phase 2? Is there a standard Config that can help? If not what is the solution?
    Thanks,

    Hi,
    Please refer the following link.
    http://help.sap.com/saphelp_47x200/helpdata/en/b1/c04d83439a11d189410000e829fbbd/frameset.htm
    Regards
    Kannan

  • Table for Process order Material movement.

    Hi experts,
    which table store process order material movement data
    movement type 309 261 etc.

    there are no ther tables, why would someone have two tables containing same info??? it would be redundant.
    MSEG is not really slow when you do qualified selects, if you can not do that you shopuld think about creating an index.

  • Material quantity calculation to be done upto a limit

    Dear PP experts,
    I am using material quantity calculation for acitve ingredients. The quantity of API should be calculated as per the assay recorded in inspection lot. But the additional requirement is that the API quantity should be calculated after batch determination only if the assay recorded is 99 % or below 99 %. If the assay recorded against inspection lot is more than 99 % the API quantity should remain the same.
    Pl. suggest how to proceed.
    Thanks,
    Prashant

    Dear Prashant
    If you can post this question in PP forum, may be you can get lot of suggestions.
    thanks
    G. Lakshmipathi

  • Batch key-X,1,2 in process order material assignment tab

    hi all
    What is the significance of Batch key X , 1, 2 in the process order .When I carry out material availabilty check the material with the batch key ' X ' is giving problem. also on release of order giving pop-up of insufficient batch determination
    That is the material with the batch key ' X ' is available in stock in sufficient quantities but it is showing in the missing parts list and also not allowing me to carryout batch determination . How to change the batch key of this material .
    regards

    Dear,
    Please refer my reply from this thread,
    Material Availability check
    Regards,
    R.Brahmankar

Maybe you are looking for

  • IDOC--PI--SEEBURGER

    Hi Experts, we are sending orders IDOC to seeburger through PI. The format on receiver side is XCBL the adapter I am using is AS2(receiver) so I want to clarify onething In the content type parameter i gave application/xcbl (for ex when we use edifac

  • How to keynote presentation question

    I will build a keynote presentation for a presentation at univeristy. My MBP will be connected to a external screen for the public. Now I am wondering if there is a way so that I can have also my personal notes to look at on my MBP, but they will not

  • Time to HHMM integer in Labview 7

    I know i asked this a while ago but for labview 5, well now we have labview 7, and i can't find the function that was posted for me to try in 5. I'm trying to get the current time in just HHMM format but as an integer so that i can add it to an exist

  • Joining two Tables

    Hi I am beginner in Oracle. I want some help in joining two tables and adding a new attribute to the resulting table For xample: Table Name: Texas* Ename   Enumber  Sal John 1 10 Akl 2 20 Renka 3 25 Table Name: California_ Ename     Enumber     Sal R

  • Trigger Table

    <pre> i have audit table as below CREATE TABLE DS_JOB_LOG JOB_ID NUMBER, JOB_NAME VARCHAR2(200), LOAD_DATE TIMESTAMP, i am trying to write a trigger which does the job of inserting one sequence number kind of thing for the column JOB_ID in DS_JOB_LOG