Batch determination issue.

08.11.2010
Hi friends.
We determine batches automatically at the delivery stage.  When a delivery is created against multiple sales orders and if the orders have the same items then in the delivery multiple lines are created for the same material. The issue is the same batches are redetermined in the subsequent line items also even after the entire quantity of the batch is determined in the earlier lines. Is there a way out to resolve this issue please.
Regards,
Udaynath.

Udaynath
I guess you need to work on the batch determination strategy config, especially the Batch Split and Quantity Proposal sections.
SPRO/Logistics - General/Batch Management/Batch Determination and Batch Check/Strategy Types/Define Sales and Distribution Strategy Types
Hope this helps.
P.S:  There could be some OSS notes too.

Similar Messages

  • Batch determination issue in process order Material quantity calculation

    Dear Gurus,
    We are facing issue in auto batch determination in process order (Material quantity calculation ).
    eg Material X  is active material 200 KIA used in BOM as
    10  X   200  KIA  
    20  Y   10           Filler
    30  Z
    40  X   200  KIA
    50  Y
    60  Z
    We select line item 10 and 40 and do Batch determination system proposes 2 batches for line item 10 as Batch A and B
    and for line 40 again Batch A (with 0.01 KIA) and batch B proposed which is wrong.
    For line Item 10 Batch A and B
    For line Item 40 Batch B and C or as per FIFO logic.
    As Batch A should be consumed in Line item 10 then it proposed Batch B and so on....
    We have already maintain data in COB1.
    Can any body explain what is wrong in determination.
    Regards,
    J.H.Pert

    Hi Pert,
    Follow the below link you have some idea OK.
    Any questions revert me back.
    Batch search strategy
    Regards,
    Madhu.G

  • Batch Determination issue -reg

    hi friends,
    while doing order confirmation at header level , when i went to goods movement  , inside that  i have selected  the material to be issued to production which should undergo 261 movement which is batch managed -
    and clicked on
    batch determination  button -
    it is showing the error
    "no search strategy could be found "
    No search strategy could be found
    Message no. LB014
    but in SPRO i have maintained all the relevant settings
    where exactly i have missed the settings and what and all i have to check if some one can help it would be appreciated
    the requirement is urgent please
    regards,
    madhu Kiran

    dear friend ,
    as i decided to do batch determination during confirmation , as adviced by you , i
    went to MBC1 -
    used strategy type ME01used key combination "movement type /plant/material"given inside movement type 261 , materail "child part of header "(raw material ) and in no.of splits 999.--saved
    then went to batch search procedure  definition -selected ME0001inside the control data given condition type ME01
    then went to allocate IM procedure and activate check
    against the movement typw 261 --given search procedure ME0001 and put tick mark in the check box "check batch "
    now tried for batch determination during confirmation
    it has thrown the error
    "STRATEGY CONTAINS NO SELECTION SPECIFICATIONS"
    Message no. LB007
    if i see the log it is displaying the third one in red ,remaining in blue
    1.Batch stocks are being read...                    
    2.Search according to selection criteria...         
    3.Strategy contains no selection specifications     
    4.Availability of batches...                        
    5. Batches are being sorted...   
             am i missing any thing ? any area i missed in class and characteristics ? that i ahve defined and the class is attached to material through CL20N
    please guide me to break this issue
    all your efforts are appreciated with gratitude
    madhu kiran

  • Batch Determination While Goods Issue

    How To Active batch Determination at the time of issue the goods
    I have done following SPRO setting .
    Strategy type --> YB01
    Inventory managment Search Procedure --> YB001
    Allocation IM Search Procedure -->> 261assigned to YB001 along with Active "Check batch"
    In MBC1....for Search Startegy YB01 , for combination of Movement Type/Plant/Material ,materil assignement made as
    material 40100
    No. batch -999
    Changed Allowed : Check
    Uom : B
    Mproposal : Active
    Material Master of raw Material 40100
    Material Master batch Management tick active
    Classifcation view : Class As Shelf life
    Characheirstics :Remaining Shelf Life
    Now i have cretaed prodcution order of 10 qty ..
    I have Four Batches With Differnt Life is available in Stock...
    Now i want to see this Four batch at The time of Issue so that i can select one of the batch for issue..
    Right now i m not getting Batch determination ..
    What else i have to do ...
    Please Guide..

    Dear,
    Have you created the sort rule in ACU70 with LOBM_VFDAT?
    Have you assigned the sort rule in MBC1?
    Also check Implementation Guide for R/3 Customizing (IMG)-- Logistics u2013 General-- Batch Management--Batch Determination and Batch Check -->Batch Search Procedure Allocation and Check ActivationAllocate IM Search Procedure/Activate Check
    Assign for 261 mov type - YB0001.
    Same need to assign in OPL8 also please try and come back.
    Regards,
    R.Brahmankar

  • Issues during Component Batch Determination for Process Orders

    Hi,
    I am encountering a strange issue during component batch determination of process order.
    1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
    "Log cannot be saved: Object/subobject not specified"
    Message no. BL201
    *Diagnosis
    Log save cancelled because at least one log contains no object or subobject.
    Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
    If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
    Procedure for System Administration
    Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
    The possible values for object and sub object must be configured in transaction SLG0.*
    If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
    Again when the order is in REL status and do the determination, It gives the same error.
    This happens only for a specific plant, In other plants batch determination works in all scenarios.
    I checked for all plant related Config for batch determination and coudn't find any discrepancies.
    Please advise how to resolve this issue. Thanks in advance for your help
    Regards,
    Aheesh

    There Is no direct solution for your requirement just try this work around.
    While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code )  make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
    Regards,
    Ajay Nikte

  • Goods Issue -- Batch Determination

    Hello Gurus,
    I am carrying out goods Issue for a particular process order and select the items and when i click CHECK, i get a warning message " Invalid batch according to selection criteria in batch determination" .
    how can i clear this.
    i want to use First exp First Out selection criteria for batch selection.
    Thanking you
    Sri.

    HI sri
    you need to create a sort rule
    where gr date >xx.xx.xxxx will be maintained
    so when u wil make production order and will goto component>batch management> trigger batch management
    then u will get the batches based on fifo

  • MPN Manufacturer batch determination during goods issue

    I am from pharma industry and my business runs with batch management, MPN features.
    Scenario:
    I have 3 different finished product P1, P2 and P3. All three finished products use raw material R1.
    But, I have restrcition like, when I am manufacturing P1 product I can only use R1 of batch from manufacturer M1.
    For P2 material we can use R1 batch from manufacturer M2 only.
    For P3 material we can use R1 batch from manufacturer M1 and M2.
    Now, I have maintained the BOM CS02 batch classification for three differ FGs P1, P2 and P3 with relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
    In COB2 T-code I am mainmtaining strategy type CO02 - Order type/Plant/Parent material with child relation ship. Here also, I am maintaining relation P1-R1-M1, P2-R1-M2, P3-R1-M1+M2.
    Now, when I am creating process order in COR1, I am getting in case of P1 order R1 material batch determination only batches from M1 manufacturer.
    Same as for P2 material process order R1 material only batches for detrmination from M2 manufacturer.
    Same as for P3 material process order R1 material batch determination option from M1 and M2 only.
    Now, if I don't go for batch determination through Process order and in stead of that if I want the batch determination during goods issue MIGO 261 movement against order, the above manufacturer level control we can't put.
    As in MBC2 T-code, we have standard batch determination and search strategy for material, plant and movement type.
    But, here we can't maintain any parent child relationship.
    Now, can you please suggest how I can control manufactuer batch detrmination as per above strategy during Migo goods issue.
    Through any standard settings we can do or, any exits required?
    Gurus please suggest!

    Dear
    You can do this by using FM CO_WB_BATCH_DETERMINATION or VB_BATCH_DETERMINATION function module.
    here you can sort the batches and compare the Batch results with the batch search strategy.
    Regards,
    R.Brahmankar

  • Automatic batch determination during goods issue

    Hi,
    We want automatic batch determination during issuance of components to a process order with out clicking on batch determination tab in COIK as well as I don't want to give '' in MB 1A transaction.  Without clicking anything batch is determining is process order for components. But it is not happening during goods issue either in transaction COIK or in MB1A. If I use COIK again i have to click on batch determination tab and putting '' in MB1A. Then only batch determining. How to avoid this. Batch should determine automatically in inventory posting also like COIK, MB1A etc.
    Thanks & Regards,
    N. Laxman

    Dear Laxman,
    Check these links,
    https://wiki.sdn.sap.com/wiki/display/ERPLO/Batch+Determination
    Automatic batch determination
    Re: how to make the batch determination process automatic
    Regards
    Mangalraj.S

  • Automatic Batch Determination during Goods issue of Production Order

    Hi,
    Iam trying to set up automatic batch determination during Goods Issue against a production order. My requirement is system should automatically run the batch determination similar to the case in production order.
    I have set up all the required configs for batch determination. But to get the batch I need to click on the batch determination button. What I need is without clicking on anything. How can I do this. Whats the config needed
    Thanks and Regards
    Enrico

    Dear Enrico
    It is required lot of set up both in production order parameters and Batch Managemnet .I am providing you a summery of it .
    Configuration Required for your above issue are as follows :
    1.Activated Batch Management in the Material Master-MRP2 view and Work Scheduling view of the FG
    2.check material master MM02, tab MRP2 and set field "Batch Entry" to value 3 here
    4.You maintain a Search Procedure in OPL8 - Order Type Dependent parameters .Before that you should have Batch serach strategy :The sequence of steps are as follows -
    Create Condition Tables
    Create Access Sequences
    Create Strategy Types
    Batch Search procedure definition
    Batch Search procedure allocation and check activation
    Define Selection classes
    Define sort rules
    Maintain Batch Allocation Strategy Number Ranges
    All the above are available in the Path - SPRO --->Logistics-General ---> Batch Management ---> Batch Determination and Batch Check
    5.Maintain the setting in T.code OPKP (production scheduling profile). Select automatic batch creation on order creation.
    6.If u want to execute the batch determination for components in the component overview of production order , then u have to create batch search strategy at COB1
    7.If u want to execute during order confirmation u have to create batch search strategy at MBC1.
    Refer the below link for your farther reference :
    http://help.sap.com/saphelp_47x200/helpdata/en/25/28428b4f7811d18a150000e816ae6e/frameset.htm
    Hope this will be useful
    Regards
    JH
    Edited by: Jiaul Haque on Jun 22, 2010 11:28 PM

  • Batch determination During Goods Issue

    Greetings..
                  How to Active batch Determination WHile issuing the goods to Production.
    I created Class and charachteristics. and assigned to materialmaster .
    Now at the time issue i need that  the system should ask the to check the Batch available in Stock with ther Shelf Life..as my charecteristics is shelf Life
    How to do this bathc Determination.
    Please GUide me with the Steps to be caried Out.
    Thanks In advance...
    Edited by: SAP PP on Apr 13, 2009 10:57 AM

    Hi,
    You can activate batch determination on the base of Goods Movement:
    Batch Determination Process
    Purpose
    This process describes how you find suitable batches for a business transaction.Here are some examples of business transactions in different applications:
    Business Transaction Application
    Material withdrawal for production/process order
    Internal material provision
    Return delivery to supplier
    Scrap/sample
    Transfer posting
    To configure this ,please find the details below:
    Prerequisites
    u2022 You must have assigned a search procedure to the business transaction. The search
    procedure contains different strategy types that are relevant for the business transaction.
    u2022 There must be a batch search strategy for one of the strategy types. See also Creating a
    Batch Search Strategy
    u2022 The selection class must contain at least one of the characteristics with which the batch
    was classified.
    Thanks,
    AMIT
    Logistics - General----> Batch Management -
    > Batch Valuation -
    >Valuation for Goods Movement in Inventory Management -
    > Activate Batch Classification for Goods Movements in IM

  • Batch Determination while doing goods issue 201

    Hi MM Experts
    i have setup batch determination , and assign procedure to movement type 201 also copleted reamaining activity
    now when i am doing godds issue batch is not coming automatically.
    please help me out to complete process
    Regards
    anubhav
    Edited by: anubhav parashar on Jan 21, 2011 3:24 PM

    hi ravi
    i have created an class and charateristic ERSDA (Creation date) , also i have created 2 batches , also characteristic assigned to short rule also , now i want whoever batch created 1st should come at the time of issue

  • Batch determination based on fifo during goods issue

    Hi All,
    My client requirement is that system should propose automatic batch during goods issue based on goods receipt.
    I have activated batch wise split valuation.
    I have maintained  characterstics with MCH1 table and HSDAT.
    Assigned to class and class is assigned to stratergy type.
    Created sort sequence and sort rule ascennding.
    Assigned this to stratergy type.
    Maintained condition record also.
    During goods issue to production system is not proposing the batch based on gr date.
    System is not stopping me while making goods issue with other batch.
    Please guide to fix the above issue.
    Regards,
    Venkatesh

    Split valuation has nothing to do with this problem.
    I hope you do not just require the sequence for physical goods issue  to be FIFO because your year end valuation will be FIFO method, as this is not necessary for FIFO valuation.
    IMG > Ligistics general > batch managment > batch determination > Allocation of batch determination schema and activation >...
    here you set the box for batch check active, which means if a batch is entered manually  then this batch is checked against the batch determination and an error is issued if the wrong batch is entered.

  • Batch Determination in time of Goods Issue

    Hi,
    We are doing internally numbered Batches. We got 4 btches say A- 10kg,B- 10Kg,  C- 10Kg, D- 10kg.
    I want to issue 30kg, at this time I want to select Batches automatically by the system which has stock thru FIFO. So that system will create 3 lines aautomatically & select batch accordingly. Is it possible.
    I saw Batch determinationin SPRO. I did all settings. consider, table, access sequence, procedure. Then make condition in MBC1 for movt. type, plant, material combination.
    When I am making isuue thru MB1A , it is not picking. How to do it ?
    RegardsBatch Determination in time of Goods Issue

    Hi
    Batch determination will not be able to determine 3 lines.
    If you enter three lines in MB1A then batches will be determined based on FIFO method.
    System cannot by itslef create three lines of 10.
    If the same was for any automatic movement such as GI for sales order then this may be possible.
    Thanks & Regards
    Kishore

  • Automatic batch determination during transfer posting. Issue.

    Hi All,
    Please could anyone advise to solve the following problem with automatic batch determination:
    1. When delivery is created for sales order, SAP automatically assigns batch number.(SLOC 1)
    2. From time to time there is a need to transfer the same material number, which is on delivery to another sloc2.
    3. Using Mb1b tcode i do transfer posting from SLOC1 to SLOC 2. In batch field i put * or (**) for automatic generation. (movement 311).
    The problem appears here, when SAP automatically assigns the same batch to transfer posting which was assigned to delivery (p.1).
    So that after transfer posting done, there is no required quantity left in batch needed to do a goods issue for delivery. So goods issue is not possible because of that kind of transfer posting.
    Do you have any idea, how to manage this, and to restrict SAP choosing the same batch which was assigned to delivery.
    Thank you,
    Kind Regards.

    There are 3 strategy types setup in MBC3 (1, 2)
    ME01, ME02 which are standart SAP.
    And one started from Z* with settings below:
    Plnt
    Valid From
    Valid to
    Delet.Ind.
    No. split
    Cpl.change
    OnlineBdet
    UnitofMeas
    MProposal
    Selection
    Sort seq.
    AAAA
    04.01.2006
    31.12.9999
    099
    X
    B
    001
    X
    X
    |
    Date of last goods receipt
    ascending
    Kind Regards,
    Andrey

  • Issue regarding Batch determination in Production order as per Expiry date.

    Dear all,
                    first of all  happy Navratri.
    I have issue regarding batch determination in production order.
    I have to compare P.O header materialu2019s expiry date and issuing components expiry date at the time of batch determination.
    lets take example,  Material having self life is u201CXu201D years and batch determination against PO is based on FEFO with the help of self life we can determine Expiry date of manufacturing material  suppose it is u201CYu201D  I have to introduce restriction at the time of good issue if expiry date of issuing components u201CZu201D is less than expiry date u201CYu201D.
    Please give your valuable suggestions either standard or through SAP enhancements.
    thanks & Regards
    SIVA

    Dear
    Thanks for your reply, i am layman about batch derivation can u elaborate it.
    Thanks & Regard

Maybe you are looking for