Batch Determination while doing goods issue 201

Hi MM Experts
i have setup batch determination , and assign procedure to movement type 201 also copleted reamaining activity
now when i am doing godds issue batch is not coming automatically.
please help me out to complete process
Regards
anubhav
Edited by: anubhav parashar on Jan 21, 2011 3:24 PM

hi ravi
i have created an class and charateristic ERSDA (Creation date) , also i have created 2 batches , also characteristic assigned to short rule also , now i want whoever batch created 1st should come at the time of issue

Similar Messages

How to change the g/l a/c being used while doing goods issue using migo

when I pass a migo entry whilie purchasing material
     , the entry goes through stock
     stock (230000 a/c no)    150        dr
      GR/IR (150000 a/c)      150        cr
when I issue material after reservation for which again migo is done
    entry is
      repairs to plant and mach (4800569 a/c)   175
                stock (230000 a/c no)           175
The stock a/c is debited and credited due to t.code obyc where for inventory posting I have assigned a/c 2300000 for valuation class assigned to material.
now I want to have a/c no 4800689 in place of 4800569. how can i change that.
that is when I issue material from stock this should be debited to 4800689 instead of 4800569. please provide t.code to change the gl from 4800689 from 4800569
full points will be awarded

continuing my issue is it possible to that we donot have to change the gbb and vbr and still we can have the desired results.
that is we are able to use different gl for debit while doing goods issue from a single stocked material
or we want to have this result
1.          repairs to p&m    1000    dr
                     stock of cement a/c           1000    cr
2.          repairs to building    2000   dr
                      stock of cement a/c            2000   cr.
3.             construction     3500     dr
                             stock of cement     3500     cr
we donot want to change the GBB and VBR every time    or change the GL a/c while doing reservation.
is there any third option where we get the desired result without changing or entering the g/l manually
if there is please let me know the t.codes

User exit while doing Goods Issue

Dear Guru's,
I have the below requirement from my client,
They want an warning msg from the system while doing Goods issue, if the stock of certain material is goes below min stock level, so i spoke to my abaper to create user exit, but he is asking for some programs from MM side related MIGO. What programs we need to give him ? is that right ? pls suggest
Edited by: channabasappa kallapur on Jan 21, 2009 5:29 PM

I don't believe you need a user exit for this .. USE OMCM and configure the availability check against the appropriate movement type

Issue while doing goods issue

Daear All,
while doing goods issue getting the error message : Acct. 200510 for trans./event key BSX, postable directly.
the same in goods receipt also.
please help me on this.
Best Regards,
Venkat.

In FS00 ,Please TICK 'post automatically only' for the GL 200510.
Regards
jabeen

Warning message during batch determination while doing GR for process order

Hi Experts,
During delivery against process order for all SFGs and FGs, we are getting warning message u201CInvalid batch according to selection criteria in batch determinationu201D.
Following settings maintained for batch determination in process order.
Condition table for order/material type maintained
Access sequence maintained for order/material type
In strategy type above access sequence has been maintained. The common class and sort sequence created for all materials in the plant have also been assigned to this strategy type. In batch split changes allowed box has been checked and quantity proposal maintained as 1.
In search procedure control maintained for order/material type. Search procedure has been assigned to all process order types and check activated.
In spite of the above when GR for order is taking place , system is throwing warning message.
GI of components is being done through backflush and without any warning message.
Please advise how to ensure proper batch determination during GR against order.
Regards
Sm.

Issue resolved by removing required indicators from characteristics which were not being valuated but were maintained in the class assigned to SFGs/FGs.
Regards
Sm.

Automatic Batch Determination while doing MFBF

Hello PP Gurus,
I have a scenario related to Repetitive Manufacturing.
I am doing MFBF transaction and doing Assembly backflush by clicking Post with correction. One of the components is batch managed.
My requirement is : On selection screen of MFBF I enter MAterial,PLant BAckflush Quantity , REM Production Version and Storage Location.
What I want is that for the component that is batch managed there should be automatic batcah determination based on shelf life and also it should pick up stock from a particular storage location only.
Also when I click POst with correction button and go to components screen the Batch Determination button comes greyed out.
For header material have maintained REM Profile.
PLease let me know what all I need to do for meeting above requirement.

Hi Anupam,
I need to know 2 things more from your side.. As you told I need to assign Stock Detrmination Rule and Batch Determination strategy in Control Data 2 of REM profile.
I have doubt on Batch determination strategy :
1) Which Batch determination strategy should I assign here. Second what all else I need to do from my side so that a batch is automatically picked and assigned to the componenet material.
The things what I have done is : I have a made a Batch Class, Assigned shelf life as a charcterstic to it. I have defined a sort rule with this characterstic.
What else I need to do.
Also FYI : We are not putting a planned order in MFBF. We are inpiutting the material to be backflushed...
Thanks

Dump while doing goods issue against order with movement type 261

Hi Team,
We are integrating Asset management process along with the goods issue against the order which is created with a business partner for movement type 261.
when we try to complete the process the system gives us a dump as described below.
please look through the dump and advice for the same.
Short text
    The current application triggered a termination with a short dump.
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
Error analysis
    Short text of error message:
    System error in the FI/CO interface
    Long text of error message:
     Diagnosis
         Updating of the FI/CO interface was called with object type "MKPF"
         yet the checks were run for object type "AMBU".
     System Response
         Checking and updating must be for the same object type.
     Procedure
         It has to do with a system error from the calling applications.
    Technical information about the message:
    Message class....... "RW"
    Number.............. 103
    Variable 1.......... "MKPF"
    Variable 2.......... "AMBU"
   Variable 3.......... " "
   Variable 4.......... " "
rigger Location of Runtime Error
   Program                                 SAPLMBWL
   Include                                 LMBWLU21
   Row                                     62
   Module type                             (FUNCTION)
   Module Name                             MB_POST_GOODS_MOVEMENT
46    IF xmkpf-xabln IS INITIAL.                               "note 434093
47        CALL FUNCTION 'MB_XAB_NUMBER_GET'.                   "note 434093
48    ENDIF.                                                   "note 434093
49
50 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
51
52 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
53    CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
54         EXCEPTIONS
55           error_message = 4.
56 * As soon as we have started to put things into UPDATE TASK, we must
57 * ensure that errors definitely terminate the transaction.
58 * MESSAGE A is not sufficient because it can be catched from
59 * external callers which COMMIT WORK afterwards, resulting in
60 * incomplete updates. Read note 385830 for the full story.
61    IF NOT sy-subrc IS INITIAL.
>>>       MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
63                  sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
64 *     MESSAGE A263.
65    ENDIF.
66 * Optische Archivierung
67 * Spaete Erfassung mit Barcode
68 * Redesign of barcode handling -> note 780365
69   PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
70                                          xmkpf-mjahr
71                                          barcode.
72
73   MOVE-CORRESPONDING xmkpf TO emkpf.
74   CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
75     EXCEPTIONS
76       error_message = 4.
77    MOVE-CORRESPONDING xmkpf TO emkpf.
ource Code Extract
ine SourceCde
32 *    BKPF as well. There is no other way to forward XBLNR to FI as not
33 *    every document is posted by MB_CREATE -> a new function module in
34 *    MBWL for transferring the information, called by FI, meant to load
35 *    the complete function group for all MBxx postings when this isn't
36 *    required (Performance). Would be the better way to transport the
37 *    information after switching off MBxx in later release.
38 *    corresponding IMPORT ... FROM MEMORY ... can be found in
39 *    AC_DOCUMENT_POST (FORM FI_DOCUMENT_PREPARE (LFACIF5D))
40      l_mem_id = 'MKPF-XBLNR'.                                   " 641365
41      EXPORT xblnr = xblnr_sd TO MEMORY ID l_mem_id.             " 641365
42    ELSE.                                                        "1245374
43      l_mem_id = 'MKPF-XBLNR'.                                   "1245374
44      FREE MEMORY ID l_mem_id.                                   "1245374
45    ENDIF.

Couple of notes are mentioned (385830, 780365 etc) and check whether these notes are applied. If so, check with the ABAPer and go through the source code corrections explained in the respective notes.
You may also go through the following notes
1) Note 386656 - FBV4: RW103 'System error in the FI/CO interface'
2) Note 388316 - RW103 "System error in the FI/CO interface"
3) Note 543463 - Inconsistent Posting in budgetary ledger and/or RW102/RW103
thanks
G. Lakshmipathi

Error while doing Good Issue for Production Order using BAPI

Hi All,
I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
*Action in Transaction (GM_CODE)
*GM Code for Goods Issue for Production Order is 03
gs_gmcode-gm_code = '03'.
*Header Data
*Posting date
gs_header-pstng_date = sy-datum.
*Document date
gs_header-doc_date   = sy-datum.
*Item Data
*Material
gs_item-material = zptp_s_rf_migo_261-matnr1.
*Movement Type
gs_item-move_type = '261'.
*Movement Indicator
gs_item-mvt_ind   = 'F'.
*Stock Type
gs_item-stck_type = 'F'.
*Plant
gs_item-plant     = gv_plant.
*Storage Location
gs_item-stge_loc = gv_str_loc.
*Quantity
gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
*Unit
gs_item-entry_uom = gv_uom.
*ISO code for unit of measurement
gs_item-entry_uom_iso = gv_uom.
*Order Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = zptp_s_rf_migo_261-aufnr
    IMPORTING
      output = gs_item-orderid.
*Reservation Number
gs_item-reserv_no = gv_resv_num.
*Reservation Item
gs_item-res_item = gv_resv_itm.
*Reservation Type
gs_item-res_type = gv_resv_type.
APPEND gs_item TO gt_item.
Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header       = gs_header
      goodsmvt_code         = gs_gmcode
    IMPORTING
      goodsmvt_headret      = gs_headret
    TABLES
      goodsmvt_item         = gt_item
      goodsmvt_serialnumber = gt_serial
      return                = gt_return.
Thanks in Advance.

hi,
did you look at message ?
System says, there are differences between the interface data and the order data. It can be anything. I think you should check
data in the interface .
this is the long explanation of your message :
Diagnosis
When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
The system checks this for the material and the order item.
System response
Due to this difference, the system cannot post the goods receipt.
Procedure
Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Feb 6, 2012 11:24 AM

Order Type wise GL Account While doing Good Issue.

Dear All,
Good Day,
We have Different types of Plant Maintenance Order , now when we do Goods Issue against the order we need specific GL Account based on Order type.
Example: Preventive Order should need XXXX GL Account
Corrective Order Should need YYYY GL Account.
thanks in advance.
Best Regards,
KSK

hi
when any material is issued against the order the G/L account will capture according the valuation class specified in the material master record and the corresponding cost element assigned to the valuation class.
once you get the material and after the work is completed you can settle the cost to the G/L account provided the settlement profile allows that.here you can maintain different settlement profile to the each order type
regards
thyagarajan

Error while doing goods issue of finished goods

Dear All,
When I try to issue fineshed good to project using transaction code MIGO, I get the following error:
"WBS element xxxx does not exist" and the message line shows " Variant xxxxx is deleted."
Kindly help me in solving this problem.
Regards,
Shynu John

I am not sure why it has happened ? May be some inconsistency, but if you wanted to check than change the date of project and try to reverse the GI. The the project date is not having any direct linkage with WBS posting.
With regards
Nitin P.

Batch not determined in MIGO-Goods Issue for cost center

Hi,
We are using Batch Determination while posting Goods Issue to cost center. However, when we enter * in the batch field system does not propose the batches.
We have done following settngs
Strategy type ME01 which is SAP standard
Batch search procedure - ME0001
Search procedure ME0001 is assigned to movement type 201 in "Allocate IM Search Procedure/Activate Check"
Sort Rule - 01 using charecterstics (ascending)
Class - BATCH_MASTER created
Characterstics - Size, Shape, Color (No table or field are maintained in Addional Data) assigned to this class.
Material is maintained with classification and batch management active.
Master Data - Search Strategy is maintained using t code MBC1 for stratefy type ME01 (Key combination Movement Type/Plant/Material). Selection criteria - Values maintained for characterstics. Sort Rule - 01
Now when we are issuing goods to cost center and enter * in batch field, system is supposed to suggest the batches (material is in stock and batches are available). However, system does not give pop up.
Am I missing something? Where is the batch determination button as system is giving message to use button?
Shekhar

Thank you for the answer.
It gives only one batch and not all the batches. Why it could be?
Shekhar

FIFO batch determination while delivery in SD

Hi Experts
I did tried to search FIFO batch determination while delivery in SD, but could not find any solution. Please suggest.
1. Strategy type -SD01
2. Batch search Procedure - SD0001
3. Allocated SD Search procedure to the sales area + Sales doc. Type
4. Activated automatic batch determination in SD.
5. Class - CLASS_FIFO is created with Char- LOBM_LWEDT
6. Sort rule - SORT_FIFO and assigned Char - LOBM_LWEDT
7. Create material and assiged Class - CLASS_FIFO and Batch management is activated
8. Maintained condition record VCH1 in keycombination - Material.
After all above configuration, I am able to do the automatic batch determiation. The suggest where I am wrong.
The same configuration I have done for FEFO and its working.
Thanks in advance.
Regards,
Kaushal Sharma.

I have resolved the problem
Happy to note you have resolved on your own but at the same time, your above comments are not going to help anybody who face similar issue. Please make it as a practice to update the forum properly as to how you resolved
G. Lakshmipathi

In the second leg STO GR and IR created withought doing Goods issue

Hi Guru's
Please can any one tell us user is created second leg STO withought doing good issue and Intercompany invoice, but he has been done GR and IR it is causing problem in MR11 report still outstanding.
i asked user to do GR cancelation or reversal, it is not possible because stocks released to QA. and GR and IR created with ref to PO

Hi,
We can not cancel GRN once it is released form QA or UD is made.

In the second leg STO GR and IR created without doing Goods issue and IV

Hi Guru's
Please can anyone tell us user is created second leg STO without doing good issue and Intercompany invoice, but he has been done GR and IR it is causing problem in MR11 report still outstanding.
i asked user to do GR cancelation or reversal, it is not possible because stocks released to QA. and GR and IR created with ref to PO

Hi,
We can not cancel GRN once it is released form QA or UD is made.

Error While doing Goods Reciept

Hi all,
While doing goods reciept for a PO we get an error"RFC destination required for GTS:it also says to see Note385830.
Kindly assist on the same.
Thanks,
Adarsh N

Please go to
http://service.sap.com/message
fill out the form and wait some hours
But I guess the solution can be found in note 825448
https://service.sap.com/sap/support/notes/825448
Edited by: Björn Panter on Nov 13, 2008 10:53 AM

Batch Determination while doing goods issue 201

Similar Messages

Maybe you are looking for