Batch does not exist for material
Dear Gurus
In the inspection set up in qm view of material master I have assigned early lot creation in control inspection lot field.I have created MICS and inspection plan also.After release of process order for that material the inspection lot for that order is created.When I am saving the inspection lot after entering in qa32 the system is throwing a dialogue box ,"batch doesnot exist should a batch be created" with 3 buttons yes, no, cancel.Although the batch number is already present for the lot that I sawwhen I entered in,( batch number is coming through internal number range).Now after pressing yes in the dialogue box when I am going to msc2n to view the batch, the error message is coming the batch does not exist.
What are the settings that I need to do so that this discrepency does not arise.
Regards
Sandip Sarkar
Was the batch number enterred in the process order? If you have an inspection lot with early lot creation, you should have the batch number assigned in the order. I suspect the system is having problems because of some conflict between the inspection lot, the process order and whatever internal batch number assignment process you might have.
FF
Similar Messages
-
Batch does not exists for the material
Dear Gurus
In the inspection set up in qm view of material master I have assigned early lot creation in control inspection lot field.I have created MICS and inspection plan also.After release of process order for that material the inspection lot for that order is created.When I am saving the inspection lot after entering in qa32 the system is throwing a dialogue box ,"batch doesnot exist should a batch be created" with 3 buttons yes, no, cancel.Although the batch number is already present for the lot that I sawwhen I entered in,( batch number is coming through internal number range).Now after pressing yes in the dialogue box when I am going to msc2n to view the batch, the error message is coming the batch does not exist.
What are the settings that I need to do so that this discrepency does not arise.
Regards
Sandip Sarkarsandip:
1) DO you assign a batch number to the product during order creation ??
2) Why do you have to enter with QA32 to save the inspection lot? This is saved once you release the order. -
Batch does not exist for mvt typ 411 K
Hi Experts,
While i am perform migo for mvt type 411 K,it shows Batch does not exist but i check in MMBE,the batch for this vendor consignment was exist with stock.
Any advice?
Thank you.How did the batch go into your system? with an initial load program, or with a standard MIGO movement?
-
Item Conversion to GMD YIELD TYPE does not exist for the item/items in this Recipe/Batch. Cannot
scale/create batch.
While auto shipping the above error i am getting. Please somebody help on this.
Thanks.Hi,
Could you please let us know which Oracle Product was installed and it complete 5 digit version.
Regards,
Prakash. -
Category for material type MAT_KMAT does not exist for configurable product
Hi,
Trying to download Confihurable product from ECC to CRM,for this I am getting the below error.
"Category for material type MAT_KMAT does not exist"
For this , i have successfully downloaded the object DNL_CUST_PROD1, but still the material type MAT_KMAT does not exist under R3PRODSTYP in COMM_Hierarchy transaction.
kindly let me know how to get the material type MAT_KMAT under R3PRODSTYP .
Regards,
PVHi
Please go through the below pdf document. This will be useful.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9076a9a4-923c-2c10-7483-d997a9eae976?quicklink=index&overridelayout=true
Regards -
Tax code does not exist for jurisdiction code in creating purchase order
Hello Experts,
After doing a technical upgrade from 4.6 C to ECC EHP 4 , while creating a PO , we are facing an error that
"Tax code A0 does not exist for jurisdiction code 4318702801". for one plant .
But in 4.6C, there is no problem with the field jurisdiction code in Invoice tab at the PO item level data. it allowed to create PO even with out entering jurisdiction code .
we have assigned jurisdiction code to the particular plant through config settings in T code OX10.And also we have verified the G/L account properties for the material used in creaton of PO. it will allow all tax codes.
But still we are facing the same error.
Please suggest where to establish linkgae betweeen Tax code and jurisdiction code at customize / config level.
it is very high priority issue . please suggest
regards,
TulasiHi,
As tax jurisdiction code is assigned to your plant on OX10 t.code and cross check Tax code declared as input tax & assigned to company code in t.code: OBCL with tjurisdiction code.
Now double cross check Tax code created (FTXP)for your country with jurisdiction code.
Also check table A003 for entry of tax code and company code.
Regards,
Biju K -
Document Sequence Information Does not Exist for Bank Account
Hello,
Oracle E-Bus Suite: 11.5.10.2
OS: Windows 2003
We are facing the problem while executing the ARPLABIM - Bank Statement Import program, 'Document Sequence Information Does not Exist for Bank Account'.
We have already reviewed Oracle Metalink Document: Document Sequence Information Does not Exist for Bank Account: Doc ID: Note:147773.1.
https://metalink.oracle.com/metalink/plsql/f?p=130:14:3345134018905587318::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,147773.1,1,1,1,helvetica
But the profile option Sequential Numbering cannot be set to Not Used due to certain funcational limitations. Please advise any other workaround.
Thank youAdith,
There are only two options:
1. Setup document Sequence. OR
2. Change the profile either the user level who runs this program (assuming a batch user name) or at the resp or application level. Not necessarily at the site level.
Thanks
Nagamohan -
Profit center US01/ TP3870 does not exist for 03/23/2011
Hello Team,
Our Profit Center is 6045TP3870 but when SD guy is releasing SD document for Account at VF02, he is getting below error,
"Profit center US01/ TP3870 does not exist for 03/23/2011"
I don't understand why the system has taken part of Profit Center only. Profit center 6045TP3870 is well exist for 03/23/2011.
I have checked the Material Master when the profit Center is correctly maintained.
Can any one help to resolve this issue.
SpandanaHey Spandana,
Make sure the profit center is active, and if it is, check for relevant validations and/or substitutions with user exits. -
PO/ Invoice created for supplier does not exist for particular company code
Hi Gurus,
We have a case where PO created w.r.t supplier X does not exist for any company code A. Also Invoice is generated.
As per my analysis:
1. Purchasing organization is assigned to the particular plant and Plant does assigned to company code. This purchasing organization does not assigned to any company code and kind of centrally allowed to any company code based on above link.
2. Supplier X does exist for the purchasing organization. And in Partner function-For PI (Invoice presented) partner function, it is defined for another supplier Y. This Y supplier does exist for company code A and might be the reason, it is allowing creating PO and Invoice.
Please correct me, if I am wrong or If there will be any other reason for the same. Just for your information, there is no Info record exist for this PO as it is created for service without any material number.
Thanks for your response.
Best regards,
Karun KumarYou can create vendor only with reference to purchase organization and withoout company code.
for this vendor, you can create PO and MIGO and system will allow but when you try to post the invoice system will prompt you to enter different invoice party. if you dont enter different invoice party, system will throw an error message "vendor is not defined in XXXX.
So in your case, your analysis is correct. -
Profit center 1000/9999 does not exist for 21.10.2008-Message no. KM026
Hello
I am trying to create Inquiry through T-code VA12 but when I am assigning Project with it pop up error
Profit center 1000/9999 does not exist for 21.10.2008
Message no. KM026
Diagnosis
The desired profit center 9999 is not in the master data table for the specified date.
Procedure
Check your entry.
Note: The profit center is usually derived from the original account assignment object (cost center, order, and so on) or other information (such as the material number).
If necessary, create the desired profit center for the appropriate time frame.
Initially in this system dummy profit center activated but I now I donu2019t want dummy profit center so I changed master data date but now I am getting this error.
From were this (9999) dummy profit center is picking.
If some body has Idea let me knowDear,
Go to tcode KCH5N select ur profit center on the right side u will find the validity period button click it to check. . If the posting is taking place within the validity period no issue else extend the validity period..
To check the period closing t.code is MMRV
To close the period - MMPV
If the problem still exists, then please go to KE53, give the respective profit center in which the material is assigned and enter.
There you can see the validity period for that profit center and I presume the validity period is ended before the creation date. Check that.
Regards,
R.Brahmankar -
SID does not exist for Characteristic
Hi All,
We are getting SQL/SID error when we execute the query "Age inventory report by
source plant" on Material Movement Cube.
When run in RSRT in Debug mode we are getting both errors as mentioned below:
Error while reading data; navigation is possible
SQL Error: 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
or
ASID = 180 does not exist for characteristic Plant or is not selected
I>> Row: 28 Inc: MESSAGE Prog: CL_RSR_BASE
sometime the workbook runs fine without errors which uses the same
query. but this is not often. when we run the query it shows SID error.
I can mail the screen shots if needed,
This is the Relpy from SAP:
This kind of issue is often lead by overflow in the kefygures used in query.
I could verify that query RIC_C03_ZQ06B_DETAIL_SOURCE01 is calculating ahuge amount of data.
It is a common issue in this situation.
Kindly check attached notes for extending key figures.
460652 Extending key figures in BW
579342 Changing key figures used in InfoProviders
Just want to know if they are relevant, since most of the columns are Restricted KF or Formulas.
We just have few keyfigures.
Has anyone comeaccross such error, Plz suggest any actions.
Thanks,
Jo
Edited by: Joseph Mundru on Jun 25, 2008 11:00 AMHi,
Check for any customer exit or SAP exit variable in the query...
Hope this helps....
Rgs,
Ravikanth -
VL01N - Message VL200 -The batch does not exist in plant
Hi all,
I try to create a delivery for a sales order via VA03 by displaying the order, select Sales document and then Delivery from the menu bar. On the Dilvery overview screen, when I enter an invalid Batch number for the item, I receive a warming messge VL 200 (The batch does not exist in plant &) and I can save the delivery. My problem is I want to put a hard stop instead of a warning message so the delivery cannot be saved. Is there any solution for this or it is impossible to put a hard stop. I was thinking of config ... but I am not familiar with this. Please help!
Thank you very much in advance,
ChuongHi Seshu,
In include FV50PF0L, there is a logic to either display a Warning or Abend message, so i guess something can be set to do this. Please help, thansk!
if v50agl-sammelgang = space and "46A BEY
( ( sy-dynnr ne gc_dyn_batchsplit and
t185v-panel ne gc_panel_chsp ) or
tvlk-vbtyp ca vbtyp_lire ) .
perform message_handling in program (programmname)
using cvbap-posnr
'200'
'W'
'VL'
lc_werks
space
space
space.
elseif ( sy-dynnr eq gc_dyn_batchsplit or "46A BEY
t185v-panel eq gc_panel_chsp ).
if sy-binpt = charx. "v_n_481983
message id 'VL' type 'A' number '200' with lc_werks.
else. "^_n_481983
perform message_handling in program (programmname)
using cvbap-posnr
'200'
'E'
'VL'
lc_werks
space
space
space.
endif. "n_481983 -
Entry point 'Test Batch' does not exist
Hi Forum
I am in the process of upgrading one of our testsystems from TestStand version 3.1 to version 4.1.
The system is started up by a Labview app which calls TS by a command line call (-runEntryPoint "Test Batch" "C:\..."). However, TS 4.1 doesn't recognize the "Test Batch" entry point (worked fine in 3.1), and I get an error box with the message "entry point 'Test Batch' does not exist". I have checked that the entry point exist in the sequence model file, and if I go to the "Execute" menu, I get the choice to run "Test Batch".
I am able to se the -run command, but then I, for some reason, don't get the entire sequence.
Any suggestions to what I am doing wrong? I am logged in to TS automatically with my windows login.
B.R.
Martin
Solved!
Go to Solution.Hi,
There should be a document in \Conponents\NI\Models\... which should give you the basics for the various process models.
here is some other references that may help
http://zone.ni.com/devzone/cda/tut/p/id/7958
http://digital.ni.com/public.nsf/allkb/D9E7A0BDDDA2A87886256FD9007598D2
Check out some of the related links
http://zone.ni.com/devzone/cda/tut/p/id/3819
Regards
Ray Farmer
Message Edited by Ray Farmer on 09-24-2009 11:00 AM
Regards
Ray Farmer -
Partner profit center 855013 does not exist for 8/27/2008
Hi FI Guys,
Iam basically MM guy,i need some help on this FI issue.Could you please help any body please.
Based on the user issue below,i found that thevalid profit center was maintaining in Material master and the G/L account was may not be assigned to G/L account.
please reply step by step.
issue from user:
Iu2019m trying to obsolete some material using MB1A, movement type 951 and the disposal account # 13560002, but after I enter all the information and try to save it I get the following message at the bottom of the screen: u201Cpartner profit center 855013 does not exist for 8/27/2008u201D.
Thanks&Regards,
Babu
09930154536Dear Babu,
The Profit Center of the selected material has expired validity. Just extend the validity through KE52 and press the button 'extend the validity period' to current year. I think that your problem will be solved.
Trust this helps much!
Cheers,
Ashok SINGH -
Table does not exist for the sys user
Hey Everyone,
I am having a strange problem with 10G 10.2. I keep getting the table does not exist for all the tables when I am logged in as sys. It is strange because I can query the same tables being logged in as a regular user say 'scott'. I can't figure out what the problem is since it could not be privileges because the user is sys. Is there something I am missing here. Any advice would be welcome.
Thanks,
SarangYeah i am using the query....
SELECT * FORM SCOTT.EMP
It is a little wierd. I did a full database restore yesterday night. I dont know if that has anything to do with this. Will have to take a look at the logs.
Maybe you are looking for
-
Hi Experts, The transaction code is F-03 Clear GL account. Clearing of CAD Bank clearing account 1051. Account balance is debit CAD 4000. The amount CAD 4000 is cleared and transferred to CAD Bank checking account 1050. The journal entry is debit 105
-
Is this the right program for me?
I need a program that'll work very well with all of my audio equipment for recording. I need something that is easy to use, but still has nice results. I plan on uploading my recordings as MP3s to a musician myspace. Is this the right thing to purcha
-
OBIEE 11g: SAML SSO performance issues
Hi All, We have implemented IDP initiated SAML2-SSO with SQL Authenticator to get user/group information. After implementing this we see following issues: 1. Login time takes around 1 minute. In nqserver.log file I can see following message: [2014-12
-
Plan activity price change (how to trace the change documents)
Hi Gurus, In KP26 the plan price is 10 but later (Both the prices are in same period) decided as 10.50 and posted the same.In the report i can see the current plan price 10.50 only.Is there any report that i can trace the first plan value 10. For ex
-
Display an error and cancel the job in F110
Hi all. I use a BTE's to check some data in F110 transaction. I want to display some error and abort the proposal creation JOB. I can to abort the Proposal creation JOB with RAISE_EXCEPTION command, but I cannot display the error. how I can to displa