Batch element raise error for few cases as Multiple entries are not allowed

Dear
Element type :' NON-RECURRING'
Multiple entry :' un-checked'
We have a commission element as non-recurring. As per company policy we allow this commission on Assignment criteria and it got successfully transfer we run it previous month. But today we are doing the same activity and getting error “Multiple entries are not allowed for this entry” in two cases while batch validation. However when we enter this element manually under the assignment element entry window, it allow user to save without any restriction.
So, why system not allow it through batch window.
I am very thank full to you, pls very critical.
Pls advice.

User uploaded duplicate assignment for the same element, therefore system was not being allowed to process for that batch. we removed duplicate record and the error was removed.

Similar Messages

Reg : "Error multiple Receivers are not allowed for Synchronous calls"

Hi All,
Can somebody tell me why I am getting this error "Error multiple Receivers are not allowed for Synchronous calls" when I am using Synchronous Soap Request to WebService and the response from webservice is being sent to multiple receivers which are Business services based on Receiver determination condition(Services W/o Party).

Hi , If you are simply looking up data (and not updating tables ) using RFC you can use RFC Lookup APIs to create a java mapping
The source message has to be a RFC request message interface and target should be RFC response message interface.
Also you can use three step mappings in a single interface mapping.
1. from your request message to RFC request message mapping
2. java mapping which will do the lookup and give you rfc response back
3.rfc response to your target response mapping.
PS: RFC lookup can be used if there are not may hierarchy in the RFC Response structure. (i.e. may be 3 or 4 level nesting permitted)
To help you further
The following is a link which gives you access to a ready made source code. you just need to compile it and create a jar and import the mapping in imported archive
http://knowhowsapxi.synthasite.com/rfc-loolup.php
Edited by: Progirl Progirl on Oct 31, 2008 1:33 PM

For the currency code ALE communication is not allowed

Hi,
I am executing the transaction for - International Payment Medium Payment orders by EDI .
On executing this t-code I am getting this error "For the currency code ALE communication is not allowed" .
Please help me resolve this issue.
Thanks.
Hemanth

Hi,
Check if SAP Note 758433 can help?
Regards

When i open terminal i get (login(1685,0x7fff73770960) malloc: *** error for object 0x106d2c4d0: pointer being freed was not allocated *** set a breakpoint in malloc_error_break to debug [Process completed])

so all of a suddun i open terminal and i get
login(1685,0x7fff73770960) malloc: *** error for object 0x106d2c4d0: pointer being freed was not allocated
*** set a breakpoint in malloc_error_break to debug
[Process completed]
in the terminal window any help?

Launch the Console application by entering the first few letters of its name into a Spotlight search, and look under "User Diagnostic Reports" for crash logs related to "login." Select the most recent one and post the contents -- the text, please, not a screenshot.

Error: Common entries are not permitted for plan queries and input queries

Hi,
I have a 2 selections in the column struct:
1. year = 2005, version = actual
2. year = 2006, version = plan, marked as data can be changed using user entry or planning function
row has posting periods from 1-12
in the workbook I have inserted this query in the workbook in analysis grid. it runs good.
now i added a button and assigned planning function to it. this planning function copies 2005, actuals to 2006, plan.
when i execute the workbook and hit this button, it gives me following error:
"Common entries are not permitted for plan queries and input queries"
please can anyone provide me assistance with this issue.
thanks,
sam

when i go to diagnosis it displays following:
Diagnosis
InfoProvider ZIP_PLAN2 must be described in this application by both a plan query and by a input-ready query, which is directly defined on the InfoProvider ZIP_PLAN2.
System Response
This is not permitted.

Odata error: Parameters are not allowed for entity "calculationView" as it is not a calculation or analytical view

I have created scripted calculation view
I can add parameter in aforesaid calculation view
It fetches me right result
But when I am to call aforesaid calculation view from odata service I am getting following error:
ERROR      zcustsearch/services/AutoComplete.xsodata
           Parameters are not allowed for entity "calculationView" as it is not a calculation or analytical view.
Any solutions

Don't reference it via the catalog object. Otherwise only the runtime Column View will be seen. Instead you should specific the view as the repository object. This means no schema and use package path::view name. Like this example from the SHINE content:
service namespace "sap.hana.democontent.epmNext" {
   "sap.hana.democontent.epmNext.models::CV_SALESORDER_YEAR_COMPARISON"
    as "salesYear"
keys generate local "ID"
    aggregates always
    parameters via entity "InputParams";

Hi. I am trying to install the photoshop element 12 tryal for 30 days. But they are asking me the serial number and i don t have it.

hi. I am trying to install the photoshop element 12 tryal for 30 days. But they are asking me the serial number and i don t have it.

Peter,
Apple doesn't sell iWork that way anymore.
You have to get it from the Mac App Store if you want to purchase from Apple, or purchase a disk from a software retailler like Amazon. They're quite cheap online now.
If you do purchase an iWork '09 disk, you will need to trash the trial copy and any plist files it has generated before you install it.
Jerry

"Validation" enabled for the composite and my testsuites are not working

I have posted the below issue in Test suite in JDEV - Studio Edition Version 11.1.1.2.0 But I felt that this is the right forum, so posting this again here:
I have mediator calling bpel. Mediator is exposed as web service. Whenever I run the service using "Test" button on EM with validation turned on
then it works and the process will be completed.
But I have initiate xml in the test suites. I select "UnitTests" and select my test case xml that was associated to "Initiate Message for operation",
I see that the process is still in the "Running" state. I put in exactly the same values as I use for testing the service from EM.
Did anybody face this issue? This happens only when we turn the validation to "Enabled" in EM.
I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.

Hello there, RevDebMN.
The following Knowledge Base article is always a great fallback article for troubleshooting Mail issues:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Particularly useful, in your case:
Mail Connection Doctor shows one or more red dots () in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
What alert message is shown in the Mail Connection Doctor "Details" column affected account?
Click here if a "Could not connect to this (server type) server…" message appears
Click here if a "Trying to log in to this (email server provider name) account failed…" message or any other error message appears
If the issue persists, then you'll want to remove the account and then add it again using this article:
Mail (Mountain Lion): Remove accounts
http://support.apple.com/kb/PH11794
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

SQL operations are not allowed with no global transaction by default for X

Hi All,
I am getting the above mentioned error.
java.sql.SQLException: SQL operations are not allowed with no global transaction by default for XA drivers. If the XA driver supports performing SQL operations with no global transaction, explicitly allow it by setting "SupportsLocalTransaction" JDBC connection pool property to true. In this case, a
lso remember to complete the local transaction before using the connection again for global transaction, else a XAER_OUTSIDE XAException may result. To complete a local transaction, you can either set auto commit to true or call Connection.commit() or Connection.rollback().
I am developing a web application. I have jsp, servlets, JDBC classes.
I am using DataSource and Connection pools.
I am on WLS 8.1 sp3 and Oracle 10.1.
Part of My Config file looks as follows:
<JDBCConnectionPool DriverName="weblogic.jdbcx.oracle.OracleDataSource" KeepLogicalConnOpenOnRelease="true" KeepXAConnTillTxComplete="false" Name="AUMDataSource" NeedTxCtxOnClose="false" NewXAConnForCommit="false" Password="{3DES}AKRkWgdzXN8WrXSRtSvJ6g==" Properties="user=pibsrmgr;portNumber=1521;SID=pibsrdod;serverName=pibsrdod.dtu.mlam.ml.com" RollbackLocalTxUponConnClose="true" SupportsLocalTransaction="false" Targets="myserver" TestTableName="SQL SELECT 1 FROM DUAL" URL="jdbc:bea:oracle://pibsrdod.dtu.mlam.ml.com:1521" XAEndOnlyOnce="false" />
<JDBCTxDataSource EnableTwoPhaseCommit="true" JNDIName="jdbc/AUMDataSource" Name="AUMDataSource" PoolName="AUMDataSource" Targets="myserver" />
Any help will be appreciated.
Thanks
---Radhe

Hi,
Regarding Transactions , the following link can helpful to you .
Regards,
Prasanna Yalam

I successfully uploaded a book using iBook Author. I need to make a correction. I keep getting this error message: ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage)

I appreciate any help or assistance. I have been trying to update one of my books for for the past few days with no success. I really just need to change two letters. But since I was updating I thought I would make a couple more improvements. I clicked disable portrait and made my pictures a little bigger to fit the whole page. But now I keep getting this error for multiple sound effects throughout the book. ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/chick02.m4p" at Book (MZItmspBookPackage). I did not change the audio. The audio files are placed in widgets. I had no problem the first time it uploaded. I have recreated my whole book from scratch and it still does not work. Does anyone have a suggestion? Thank you for your attention to my question.

Florida author wrote:
Could it matter that I am dragging my audio files onto my document? They appear to be in a widget once dragged in. I use the widget insector to make changes. However, I did not go to the top of the screen and click widget and then insert my audio file.
I don't believe that would make any difference. Drag-and-drop is just a UI shortcut for using the menu items.
Also some of the audio file were used in previous books. Would that cause an error?
No. Each book is a stand-alone entity. It doesn't matter if the same audio file appears in another book.
From what people have reported here, it looks like there is a bug in the submission system. Other than trying the suggestions posted in the linked-to thread, I don't think there is anything you can do to fix it.
I would submit a bug report to Apple though. Quite a lot of people seem to be affected by this problem, and if they hear about the same problem from lots of different sources, that will (presumably) elevate the importance of fixing it.
Michi.

Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM

Dear Friends,
In Se38 abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
In the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
Please suggest how to resolve the errors.
Regards
Sridhar

Hello,
Why are you directly executing these programs?
You will not expect these program to execute directly by going to SE38.
I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
Hope this is informative and solves your issue.
Regards,
Ravi

I can't purchase anything even though I redeemed an iTunes card for $15. Apple is asking to verify my credit card info, and also for answers to security codes that are not mine.

Okay so I just got an iPhone 5. My first iPhone. In the past I've had two different iPods, an iPod Touch 3rd Generation, and an iPad 2.
I only have 87 cents in my bank account so I paid cash for a $15 iTunes card so I could get some applications on my new iPhone 5. I realize that iTunes won't let me download updates or buy new applications when my bank account has a low or insufficient balance, so it will ask to verify the code on the back of the card. After entering the code, it says to please enter valid information. The information is valid, but won't be accepted because it has a low balance.
I tried selecting "None" as my payment options to see if that would allow me to make purchases using the $15 balance I just redeemed from the iTunes card. It doesn't seem to help the situation.
I went to contact Apple, but I had to schedule a call (this is the first time I've ever had to contact support for a problem - ever). I also sent in an email hoping I would get a response sooner. I want to play with my phone now, not in a few days when they can finally call me back...
While trying to figure out a solution to this, I ran into a couple of security questions that aren't even mine... They can't be because I don't have an answer for them. These security codes are not mine. I tried putting in an answer and it didn't work - obviously, because the questions don't apply to me. What the heck is going on Apple? I've never had so much trouble with your services before.
I'm not very happy right now.

Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

Error message MH 175 "The listing end is not allowed to be in the past"

Hi,
While I try to execute listing in the new article creation using particular disctribution chain, i.e. with reference to a Sales Org and distribution channel, the error message MH 175, 'The listing end is not allowed to be in the past' popped up. Can you please help me on what could be the cause for this error to be displayed.
thank you
regards
prahlad

Hi,
Go to mm42.. enter the article number and distribution chain and then select the Listing View.... Please check the "Listed to" and "for Sale till" date is in past. if so change the date to future and try agian.
Regards
GK

ERROR MESSAGE : display of the query spec is not allowed

Hi all,
I have many queries built under a multiprovider. The problem is if i try to chane a query it is not allowing me to do it. Even for a query which i built it is not allowing. It is displaying an error message 'display of the query spec is not allowed'.
Can anyone help me in understanding this issue?
Thanks,
Raj.

Have you check your authorizaiton trace with ST01?
You need authorization for this query in auth obj S_RS_COMP or S_RS_COMP1

ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:la

I have all these errors, can anyone help with this all means? trying to get my book published in iBooks. Nedd your help. Thanks, Jo
ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:lang"" at Book (MZItmspBookPackage)
Use of the block quote element can cause ePubecheck to give the error "text not allowed here". Text must not be alone inside of a body tag and if it is not enclosed in some other block level tag, this may lead to the error you are receiving.

I have all these errors, can anyone help with this all means? trying to get my book published in iBooks. Nedd your help. Thanks, Jo
ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:lang"" at Book (MZItmspBookPackage)
Use of the block quote element can cause ePubecheck to give the error "text not allowed here". Text must not be alone inside of a body tag and if it is not enclosed in some other block level tag, this may lead to the error you are receiving.

Batch element raise error for few cases as Multiple entries are not allowed

Similar Messages

Maybe you are looking for