Batch Export Tracks
I have a sequence with VO in 26 languages on separate tracks with the music & VO mixed down on its own track.
I'd like to run a script or discover an easy way to get batch export each VO track separately out of Soundtrack with the music track.
Is there a way?
http://journal.reallyenglish.com/2010/01/30/batch-image-exporting-from-fla.html
Similar Messages
-
Using BATCH-EXPORT on subclips vs MM to create independent media files
I've been capturing full HDV tapes with the DV Start/Stop Detection turned on and everything has worked just fine - until now. I'm now encountering a problem w FCP "Searching for Media" on roughly 25% of my clips DURING capture, and in the process, losing about 5 seconds at the start of the clip. I've been having lots of problems w my G5 over the last couple months and it's been acting quite slow and I imagine this is related to that.
So... after a full 2 days trying to get Media Manager to create independent media files from my subclips (after capturing a twenty minute chunk whole, then breaking it down), following the FCP manual volume II pg 42 to a tee... I concur w many others on this site that Media Manager *****! No matter what I did, it would not produce new files out of my subclips and instead kept giving me the same error: "Reconnect Media Failed. The clip such-and-such was unable to be reconnected to the trimmed file due to a mismatch of the media present in the file... yada yada." Yes, I shortened the end of the first subclip by a couple frames, and I also had another subclip to delete, and I tried going straight from the bin, then from the timeline, then after making all clips independent in the timeline... nothing!
Then I discovered BATCH EXPORT.
Using it, I exported my HDV subclips using Quicktime Movie, Self-Contained, HDV 30, audio and video. It processed 20 minutes of subclips in just a few minutes so I'm fairly confident that no real 'processing' occurred.
Can someone verify for me though that this is a safe procedure and that I am not re-processing HDV files with more HDV nonsense? Before continuing, I would just like to know for sure that Batch Export produces exactly the same result with subclips then if I were to simply capture one clip at a time.
Thanks a bunch,
ChrisI can confirm that it does not merge audio tracks. Track 1 and 2 remain the same. In fact everything appears as it would if I were to capture direct, I just want someone who knows better to validate this!
Also, has anyone else experienced the slowdown during log & capture that I described, with the intermittent message "searching for media"? -
When doing a batch export I receive a message:
"Batch Export Filename Error
The output filename for this item already exists for another item in the export queue.
To continue the export, enter a new base output filename below and select ok."
I then have to assign some random file name for each or the default mattes and titles in my timeline that are all named “color,” "Title 3D." So I am naming them “color1” “color2” etc. I just went through naming a ton of them and now it is asking me the same questions again!
How can I avoid all of this?
Thanks for your help!I have 4 tracks in the timeline:
V4: Title 3D
V3: Color (it is a black matte)
V2: Video clip
A3: audio
A4: audio
The video is cut into clips and I have copied-and-pasted many instances of the title and color clips so that it continuously plays during the duration of all of the video.
I did a select all of the timeline and dragged everything to a new bin and did a batch export.
Should I be doing this another way???? It just keeps asking me to rename the filenames over and over again and never gets anywhere. -
How batch export layers to files in CS5
Hi,
I am a newbie in CS5 , I tried to batch export layer to files in CS5 , because I have thousands PSD files that I need to export layers in separated png files..
In each script I made I have the following error.." reference error: dlgMain is not found" ( in french: erreur de reference: dlgMain n'est pas definie)
How can I batch export layers to files in CS5??
Thankyou all by advance for your help.I am humbled to be of any help. I truly believe you are one of the unsung heroes of the Photoshop community!
I lost track of how many custom and ingenious scripts you created for countless other users, in so many online places...
As a scripts Illiterate, I bow in front of your knowledge and generosity!
(But Learning After Effects Expressions might in fact made me begin to make tiny steps towards wrapping my head around scripting) -
Preserving Marker master comment in batch export
Hello,
I'm doing a quasi-transcription of clips using markers and the comments. I'd like to make subclips of all the markers (with Master Comments) to eventually export to Excel and have a nice rough transcription of interviews etc. However, when I make the subclips from the markers, the Master Comment 1 (which has good, supplementary info and/or dialog) is gone and I lose that info. Is there a way to preserve that master comment when making a sublclip from a marker?
Thanks!Hi guys,
I have solved the problem! Although I now realise that I have totally missed how this all works.. Doh.
Basically I was expecting to see the batch export option icon in the 'Marker List' when in 'Multitrack' mode. I now realise that it is only available in 'Edit' mode.
Sorry for wasting your time although this might help out others who make the same mistake as me. I assumed I would be able to do this from Multitrack mode as I find it easy to edit a large VO take in multitrack and then apply effects to the whole track easily. It would be nice to be able to batch export from this view based on the current track settings, but it's not too bad.
Also, for anyone who is wondering you can take a multitrack session down into edit mode with ALL markers in place by going to File->Export->Audio Mixdown. From here it's then a simple case to export all markers out based on your preferences.
So pleased to have solved this one.
Thanks for all responses.
James. -
Problem batch exporting odd sized mp4's in After Effects?
Just been given the great task of converting hours and hours of supplied image sequences into mp4/ h.264 files for playing through silverlight. I envisaged assembling these sequences with their supplied sound tracks in after effects and outputing to mp4 with h.264 encoding
I'm working at a non broadcast size (1000 x 576)and cannot get the after effects h.264 exporter in the render queue (adobe media encoder) to swallow this size without throwing up an error. It wants me to stretch the footage to different sizes based on what few presets are available, when I want to maintain the current size.
I know I can export exactly what I want via the file menu (file> export>MPEG4) or via quicktime if I export a lossless file first, but I can't batch that in a render queue & I will have quite a lot of files to set off.
Is there any way to get the mpeg 4 render options as seen under file> export , working in the render queue as the standard options in the render queue seem limited?
Alternatively can any anyone recommend a good batch mp4 encoder app in the event I cant get everything I want out of after effects?ok , i can see the problem.
try this if you need to finish your work within the next couple of hours:
use Ae render queue >> export quicktime >> Foto or Motion Jpeg >> download mpeg streamclip >> batch export to H264 mpeg4 >> done.
do a few seconds of render tests b4 you send the whole bunch to the batch. also 4 mpeg streamclip.
and if you are happy with the result, blame adobe... -
Batch Export Trick for Logic using Markers and XLD
I've always wanted apple to implement batch export of multiple audio files from logic using markers as delimiters. So you can mix a concert and export it in one go without having to hang around and re-start bouncing for each track.
Now you can do this (albeit in a two step process) using Logic 9.1 and the free and wonderful XLD!
Just place markers in your project and bounce as AIFF (this is the only format that seems to work with this, so you are out of luck if your bounce file is going to be larger than 2GB). I suggest placing a marker at the very beginning of the project too so you first file is not called "Timestamp_0" or some such thing. You can even name the markers with the name you want each file to have, though keep in mind files will sort alphabetically of course once they are split if you have a specific order - so maybe preface them with 01, 02, 03, etc etc.
OK - now go get XLD (the GUI version):
http://tmkk.hp.infoseek.co.jp/xld/index_e.html
download, install and run it. No window will appear at first. Open the preferences and choose your desired output format and options, directory, etc
drop the AIFF file onto XLD (I've put XLD into my Finder window toolbar for easy access). When it asks you to open the embedded cue sheet, say "OK" and your markers should appear as a list of CD tracks that you can play double click to play with a player interface and preview.
Then press "Decode" and voila! All your markers as separate audio files with the marker name, in whatever format (including the multiple formats option) you set XLD for.
You can even edit metadata at this stage (but first consider whether your output format supports it)
Some of the formats XLD can produce are
AIFF
WAV
Apple Lossless (saves some space!)
FLAC
AAC
MP3
OGG
etc etc
Personally I think this is an absolutely fantastic trick and am happy to have discovered it. Hope it helps you too.Also, if you have gaps in the original session, put a marker at the end of the previous section and call it something like "end". Then you can uncheck all the "end" 'tracks' in the cue sheet and they wont be exported in XLD.
Oh and it also seems XLD will preface your marker delimited files with their 'CD track' number. Useful to keep them in order, but they will probably want to be changed if you have gaps you took out with extra "end" markers. -
first a little backstory - my band recorded all of our songs at a real studio - we did all the instruments live going to 2" tape on a studer A-80 (for those of you who care). i took rough mixes home, and i have recorded all of my vocals in garageband to that mix for every song. i now have around 5-6 takes for all 6 songs we recorded, and i want to export every single vocal track separately so we can bring them back to the studio we recorded at, and mix them properly. does anyone know of a way to batch export every single track separately, rather than mute each one i want and export one at a time? i'm wondering if automator might be able to help?
thanks in advance for any suggestions anyone may have.Thanks for the quick response, Jim. I need the splash images to match the videos they came from, which are going to be all different sizes, so I don't think batch resizing will work.
Do you know of any other software that can do this? This may not be the place to ask that, but I wouldn't know where else to start.
Thanks,
Calvin -
Marker List: Batch Export Marker Regions MISSING
Hi guys,
I am running Audition 3.0.1 on Windows 7 x64 and just went to use the 'Batch Export Marker Regions' function in the 'Markers' panel to save any my marked regions to seperate files.
However, the icon for this seems to be missing completely.
Any ideas what is wrong and how I might get the icon back?
Here's a grab of the panel. As you can see, the icon that should be bottom right just isn't there!
Many thanks in advance,
James.Hi guys,
I have solved the problem! Although I now realise that I have totally missed how this all works.. Doh.
Basically I was expecting to see the batch export option icon in the 'Marker List' when in 'Multitrack' mode. I now realise that it is only available in 'Edit' mode.
Sorry for wasting your time although this might help out others who make the same mistake as me. I assumed I would be able to do this from Multitrack mode as I find it easy to edit a large VO take in multitrack and then apply effects to the whole track easily. It would be nice to be able to batch export from this view based on the current track settings, but it's not too bad.
Also, for anyone who is wondering you can take a multitrack session down into edit mode with ALL markers in place by going to File->Export->Audio Mixdown. From here it's then a simple case to export all markers out based on your preferences.
So pleased to have solved this one.
Thanks for all responses.
James. -
How do i change the size of a clip using batch export?
hi, when i try and do a batch export to change my clips from a DV PAL to PhotoJpeg 320*240 sized clips the "options" button is greyed out. so all i have as export settings are the QT presets in a pulldown list. is there any way i can create my own setting? (and the also save that?)
thxwhat i'm seeing is that
a) selecting all files in Media Man. gives me the option to size and set codecs but not the audio off.
b) selecting all files in Batch Export allows me to pick a format (QT, aiff etc) choose a preset (photoJpeg included) select whether to include audio and video or both but not set the size or customize the QT settings
c) selecting all clips then "file>export>using QT conversion" gives me all options, but seem to grab only the first clip. -
Is there a way to select multiple sequences and batch export them using the same settings in CS6?
I am a current Final Cut Pro7 user and looking to switch over to Premiere Pro CS6. We edit approx. 100 short (15 sec.) videos daily, and then select them all at the end of the day and batch export them over night using the same export recipe for all. I have having trouble finding an easy way to do this in Premiere pro CS6, as command +E is grayed out if i select more than one sequence at a time.
so far, it appears that i have to select each video individually and manually set encoding recipe and export location for each.... Not only would this be terribly time consuming, but it leaves a lot of room for error and missed videos. I thought i would be able to send all of the sequences to Adobe Media Encoder, but i dont see that option either.
Any suggestions/
thanks!Open Media Encoder and add your Sequences:
File > Add Premiere Pro Sequence
Navigate to your Premiere Project and select it in the list.
You can then select multiple Sequences from the Project (Ctrl+Click)
and load them all at once into Media Encoder and apply
the same encoding preset to all Sequences at the same time. -
No Method of Batch Export for Clips with Alpha Channels?
Good morning,
As many a flustered editor has eventually discovered, in order for FCP to export sequences with alpha channels to a 32-bit format, the timeline has to be un-rendered at the time of export, or else the transparent parts will appear black in the outputted file. This sort-of makes sense if you know how FCP and render files work, but in a perfect world I think I'd have designed the export interface a bit differently. Now that I think about it, I'm actually working in an Animation (Millions of Colors +) sequence, so converting transparent areas to black makes no logical sense at all.
Anyway, I have several sequences that I would like to export as 32-bit TGA QuickTime files, preserving their transparency. If I Export Using Compressor, the process results in pre-rendering of the sequence, turning the transparent areas black. The same problem occurs if I export QuickTime reference movies from FCP and open them directly with Compressor.
Does anyone know of a way to avoid this silly phenomenon or am I stuck individually exporting each sequence from FCP, one...at.......a................time?
Thanks,
ZapThanks, Andy, "Batch Export" eventually did the trick!
I forgot about that tool because I've never actually had to use it before! After playing around with it for a while, I found that as long as the sequence settings for each sequence in the batch are set to a codec with an activated alpha channel, it works just fine.
Thanks again,
Zap -
How batch export layers to files png in cc
I am having trouble with an export layers to files script i am wanting to batch export layer to png and this script i have seems to be the one i want although every time i run the script i get this error message "could not complete the action since the destination folder doesn't exist" the script required me to hard code my destination path the path i require is "C:/Users/Tim/Desktop/Backdrops/png/" I am not completely sure why its stating it does not exist any help would be greatly appreciated. i have tried to contact the creator but the post it was on was very old.
// enable double clicking from the Macintosh Finder or the Windows Explorer
#target photoshop
//=================================================================
// Globals
//=================================================================
var exportPath = "/Users/pedr/Documents/Work/Clients/Pathways/Learning_Hub/Source/Comics/export";
exportPath = exportPath + '/layers';
// UI strings to be localized
var strTitle = localize("$$$/JavaScripts/X2L/Title=X2L");
var strButtonRun = localize("$$$/JavaScripts/X2L/Run=Run");
var strButtonCancel = localize("$$$/JavaScripts/X2L/Cancel=Cancel");
var strHelpText = localize("$$$/JavaScripts/X2L/Help=Please specify the format and location for saving each layer as a file.");
var strLabelDestination = localize("$$$/JavaScripts/X2L/Destination=Destination:");
var strButtonBrowse = localize("$$$/JavaScripts/X2L/Browse=&Browse...");
var strLabelFileNamePrefix = localize("$$$/JavaScripts/X2L/FileNamePrefix=File Name Prefix:");
var strCheckboxVisibleOnly = localize("$$$/JavaScripts/X2L/VisibleOnly=&Visible Layers Only");
var strLabelFileType = localize("$$$/JavaScripts/X2L/FileType=File Type:");
var strCheckboxIncludeICCProfile = localize("$$$/JavaScripts/X2L/IncludeICC=&Include ICC Profile");
var strJPEGOptions = localize("$$$/JavaScripts/X2L/JPEGOptions=JPEG Options:");
var strLabelQuality = localize("$$$/JavaScripts/X2L/Quality=Quality:");
var strCheckboxMaximizeCompatibility = localize("$$$/JavaScripts/X2L/Maximize=&Maximize Compatibility");
var strTIFFOptions = localize("$$$/JavaScripts/X2L/TIFFOptions=TIFF Options:");
var strLabelImageCompression = localize("$$$/JavaScripts/X2L/ImageCompression=Image Compression:");
var strNone = localize("$$$/JavaScripts/X2L/None=None");
var strPDFOptions = localize("$$$/JavaScripts/X2L/PDFOptions=PDF Options:");
var strLabelEncoding = localize("$$$/JavaScripts/X2L/Encoding=Encoding:");
var strTargaOptions = localize("$$$/JavaScripts/X2L/TargaOptions=Targa Options:");
var strLabelDepth = localize("$$$/JavaScripts/X2L/Depth=Depth:");
var strRadiobutton16bit = localize("$$$/JavaScripts/X2L/Bit16=16bit");
var strRadiobutton24bit = localize("$$$/JavaScripts/X2L/Bit24=24bit");
var strRadiobutton32bit = localize("$$$/JavaScripts/X2L/Bit32=32bit");
var strBMPOptions = localize("$$$/JavaScripts/X2L/BMPOptions=BMP Options:");
var strAlertSpecifyDestination = localize("$$$/JavaScripts/X2L/SpecifyDestination=Please specify destination.");
var strAlertDestinationNotExist = localize("$$$/JavaScripts/X2L/DestionationDoesNotExist=Destination does not exist.");
var strTitleSelectDestination = localize("$$$/JavaScripts/X2L/SelectDestination=Select Destination");
var strAlertDocumentMustBeOpened = localize("$$$/JavaScripts/X2L/OneDocument=You must have a document open to export!");
var strAlertNeedMultipleLayers = localize("$$$/JavaScripts/X2L/NoLayers=You need a document with multiple layers to export!");
var strAlertWasSuccessful = localize("$$$/JavaScripts/X2L/Success= was successful.");
var strUnexpectedError = localize("$$$/JavaScripts/X2L/Unexpected=Unexpected error");
var strMessage = localize("$$$/JavaScripts/X2L/Message=X2L");
var stretQuality = localize( "$$$/locale_specific/JavaScripts/X2L/ETQualityLength=30" );
var stretDestination = localize( "$$$/locale_specific/JavaScripts/X2L/ETDestinationLength=160" );
var strddFileType = localize( "$$$/locale_specific/JavaScripts/X2L/DDFileType=100" );
var strpnlOptions = localize( "$$$/locale_specific/JavaScripts/X2L/PNLOptions=100" );
var strPNG8Options = localize("$$$/JavaScripts/X2L/PNG8Options=PNG-8 Options:");
var strCheckboxPNGTransparency = localize("$$$/JavaScripts/X2L/Transparency=Transparency");
var strCheckboxPNGInterlaced = localize("$$$/JavaScripts/X2L/Interlaced=Interlaced");
var strCheckboxPNGTrm = localize("$$$/JavaScripts/X2L/Trim=Trim Layers");
var strPNG24Options = localize("$$$/JavaScripts/X2L/PNG24Options=PNG-24 Options:");
// the drop down list indexes for file type
var png24Index = 7;
main();
// Functions
// Function: main
// Usage: the core routine for this script
// Input: <none>
// Return: <none>
function main() {
if ( app.documents.length <= 0 ) {
if ( DialogModes.NO != app.playbackDisplayDialogs ) {
alert( strAlertDocumentMustBeOpened );
return 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
var exportInfo = new Object();
initExportInfo(exportInfo);
// look for last used params via Photoshop registry, getCustomOptions will throw if none exist
try {
catch(e) {
// it's ok if we don't have any options, continue with defaults
try {
var docName = app.activeDocument.name; // save the app.activeDocument name before duplicate.
var layerCount = app.documents[docName].layers.length;
var layerSetsCount = app.documents[docName].layerSets.length;
if ((layerCount <= 1)&&(layerSetsCount <= 0)) {
if ( DialogModes.NO != app.playbackDisplayDialogs ) {
alert( strAlertNeedMultipleLayers );
return 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
} else {
var rememberMaximize;
var needMaximize = exportInfo.psdMaxComp ? QueryStateType.ALWAYS : QueryStateType.NEVER;
app.activeDocument = app.documents[docName];
var duppedDocument = app.activeDocument.duplicate();
duppedDocument.activeLayer = duppedDocument.layers[duppedDocument.layers.length-1]; // for removing
setInvisibleAllArtLayers(duppedDocument);
exportChildren(duppedDocument, app.documents[docName], exportInfo, duppedDocument, exportInfo.fileNamePrefix);
duppedDocument.close( SaveOptions.DONOTSAVECHANGES );
if ( rememberMaximize != undefined ) {
app.preferences.maximizeCompatibility = rememberMaximize;
if ( DialogModes.ALL == app.playbackDisplayDialogs ) {
//alert(strTitle + strAlertWasSuccessful);
app.playbackDisplayDialogs = DialogModes.ALL;
} catch (e) {
if ( DialogModes.NO != app.playbackDisplayDialogs ) {
alert(e);
return 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
// Function: settingDialog
// Usage: pop the ui and get user settings
// Input: exportInfo object containing our parameters
// Return: on ok, the dialog info is set to the exportInfo object
function settingDialog(exportInfo) {
return;
// Function: hideAllFileTypePanel
// Usage: hide all the panels in the common actions
// Input: <none>, dlgMain is a global for this script
// Return: <none>, all panels are now hidden
function hideAllFileTypePanel() {
// Function: initExportInfo
// Usage: create our default parameters
// Input: a new Object
// Return: a new object with params set to default
function initExportInfo(exportInfo) {
//exportInfo.destination = new String(exportPath);
exportInfo.fileNamePrefix = new String("untitled_");
exportInfo.visibleOnly = false;
exportInfo.fileType = png24Index;
exportInfo.icc = true;
exportInfo.png24Transparency = true;
exportInfo.png24Interlaced = false;
exportInfo.png24Trim = true;
try {
exportInfo.destination = Folder(new String(exportPath)).fsName; // destination folder
var tmp = app.activeDocument.fullName.name;
exportInfo.fileNamePrefix = decodeURI(tmp.substring(0, tmp.indexOf("."))); // filename body part
} catch(someError) {
exportInfo.destination = new String(exportPath);
exportInfo.fileNamePrefix = app.activeDocument.name; // filename body part
// Function: saveFile
// Usage: the worker routine, take our params and save the file accordingly
// Input: reference to the document, the name of the output file,
// export info object containing more information
// Return: <none>, a file on disk
function saveFile( docRef, fileNameBody, exportInfo) {
saveFile(docRef, fileNameBody, exportInfo, false, true);
function saveFile( docRef, fileNameBody, exportInfo, interlacedValue, transparencyValue) {
var id6 = charIDToTypeID( "Expr" );
var desc3 = new ActionDescriptor();
var id7 = charIDToTypeID( "Usng" );
var desc4 = new ActionDescriptor();
var id8 = charIDToTypeID( "Op " );
var id9 = charIDToTypeID( "SWOp" );
var id10 = charIDToTypeID( "OpSa" );
desc4.putEnumerated( id8, id9, id10 );
var id11 = charIDToTypeID( "Fmt " );
var id12 = charIDToTypeID( "IRFm" );
var id13 = charIDToTypeID( "PN24" );
desc4.putEnumerated( id11, id12, id13 );
var id14 = charIDToTypeID( "Intr" );
desc4.putBoolean( id14, interlacedValue );
var id15 = charIDToTypeID( "Trns" );
desc4.putBoolean( id15, transparencyValue );
var id16 = charIDToTypeID( "Mtt " );
desc4.putBoolean( id16, true );
var id17 = charIDToTypeID( "MttR" );
desc4.putInteger( id17, 255 );
var id18 = charIDToTypeID( "MttG" );
desc4.putInteger( id18, 255 );
var id19 = charIDToTypeID( "MttB" );
desc4.putInteger( id19, 255 );
var id20 = charIDToTypeID( "SHTM" );
desc4.putBoolean( id20, false );
var id21 = charIDToTypeID( "SImg" );
desc4.putBoolean( id21, true );
var id22 = charIDToTypeID( "SSSO" );
desc4.putBoolean( id22, false );
var id23 = charIDToTypeID( "SSLt" );
var list1 = new ActionList();
desc4.putList( id23, list1 );
var id24 = charIDToTypeID( "DIDr" );
desc4.putBoolean( id24, false );
var id25 = charIDToTypeID( "In " );
desc4.putPath( id25, new File( exportPath + "C:/Users/Tim/Desktop/Backdrops/png/" + fileNameBody + ".png") );
var id26 = stringIDToTypeID( "SaveForWeb" );
desc3.putObject( id7, id26, desc4 );
executeAction( id6, desc3, DialogModes.NO );
// Function: zeroSuppress
// Usage: return a string padded to digit(s)
// Input: num to convert, digit count needed
// Return: string padded to digit length
function zeroSuppress (num, digit) {
var tmp = num.toString();
while (tmp.length < digit) {
tmp = "0" + tmp;
return tmp;
// Function: setInvisibleAllArtLayers
// Usage: unlock and make invisible all art layers, recursively
// Input: document or layerset
// Return: all art layers are unlocked and invisible
function setInvisibleAllArtLayers(obj) {
for( var i = 0; i < obj.artLayers.length; i++) {
obj.artLayers[i].allLocked = false;
obj.artLayers[i].visible = false;
for( var i = 0; i < obj.layerSets.length; i++) {
setInvisibleAllArtLayers(obj.layerSets[i]);
// Function: removeAllInvisibleArtLayers
// Usage: remove all the invisible art layers, recursively
// Input: document or layer set
// Return: <none>, all layers that were invisible are now gone
function removeAllInvisibleArtLayers(obj) {
for( var i = obj.artLayers.length-1; 0 <= i; i--) {
try {
if(!obj.artLayers[i].visible) {
obj.artLayers[i].remove();
catch (e) {
for( var i = obj.layerSets.length-1; 0 <= i; i--) {
removeAllInvisibleArtLayers(obj.layerSets[i]);
// Function: removeAllEmptyLayerSets
// Usage: find all empty layer sets and remove them, recursively
// Input: document or layer set
// Return: empty layer sets are now gone
function removeAllEmptyLayerSets(obj) {
var foundEmpty = true;
for( var i = obj.layerSets.length-1; 0 <= i; i--) {
if( removeAllEmptyLayerSets(obj.layerSets[i])) {
obj.layerSets[i].remove();
} else {
foundEmpty = false;
if (obj.artLayers.length > 0) {
foundEmpty = false;
return foundEmpty;
// Function: zeroSuppress
// Usage: return a string padded to digit(s)
// Input: num to convert, digit count needed
// Return: string padded to digit length
function removeAllInvisible(docRef) {
removeAllInvisibleArtLayers(docRef);
removeAllEmptyLayerSets(docRef);
// Function: exportChildren
// Usage: find all the children in this document to save
// Input: duplicate document, original document, export info,
// reference to document, starting file name
// Return: <none>, documents are saved accordingly
function exportChildren(dupObj, orgObj, exportInfo, dupDocRef, fileNamePrefix) {
for( var i = 0; i < dupObj.artLayers.length; i++) {
if (exportInfo.visibleOnly) { // visible layer only
if (!orgObj.artLayers[i].visible) {
continue;
dupObj.artLayers[i].visible = true;
var layerName = dupObj.artLayers[i].name; // store layer name before change doc
var duppedDocumentTmp = dupDocRef.duplicate();
if ((png24Index == exportInfo.fileType)||(png8Index == exportInfo.fileType)) { // PSD: Keep transparency
removeAllInvisible(duppedDocumentTmp);
//PNGFileOptions
if (activeDocument.activeLayer.isBackgroundLayer == false) { //is it anything but a background layer?
app.activeDocument.trim(TrimType.TRANSPARENT);
} else { // just flatten
duppedDocumentTmp.flatten();
// Edit
var docName = app.activeDocument.name;
// For some reason indexOf fails if we include the '-', so we use 'copy' and decrement the index by 1.
docName = docName.slice(0, docName.indexOf('copy')-1);
var fileNameBody = (docName+'_'+layerName).toLowerCase();
fileNameBody = fileNameBody.replace(/[:\/\\*\?\"\<\>\|]/g, "_"); // '/\:*?"<>|' -> '_'
if (fileNameBody.length > 120) {
fileNameBody = fileNameBody.substring(0,120);
saveFile(duppedDocumentTmp, fileNameBody, exportInfo);
duppedDocumentTmp.close(SaveOptions.DONOTSAVECHANGES);
dupObj.artLayers[i].visible = false;
for( var i = 0; i < dupObj.layerSets.length; i++) {
if (exportInfo.visibleOnly) { // visible layer only
if (!orgObj.layerSets[i].visible) {
continue;
var fileNameBody = fileNamePrefix;
fileNameBody += "_" + zeroSuppress(i, 4) + "s";
exportChildren(dupObj.layerSets[i], orgObj.layerSets[i], exportInfo, dupDocRef, fileNameBody); // recursive call
// Function: objectToDescriptor
// Usage: create an ActionDescriptor from a JavaScript Object
// Input: JavaScript Object (o)
// object unique string (s)
// Pre process converter (f)
// Return: ActionDescriptor
// NOTE: Only boolean, string, number and UnitValue are supported, use a pre processor
// to convert (f) other types to one of these forms.
// REUSE: This routine is used in other scripts. Please update those if you
// modify. I am not using include or eval statements as I want these
// scripts self contained.
function objectToDescriptor (o, s, f) {
o = {};
var d = new ActionDescriptor;
var l = o.reflect.properties.length;
d.putString( app.charIDToTypeID( 'Msge' ), s );
for (var i = 0; i < l; i++ ) {
var k = o.reflect.properties[i].toString();
if (k == "__proto__" || k == "__count__" || k == "__class__" || k == "reflect")
continue;
var v = o[ k ];
k = app.stringIDToTypeID(k);
switch ( typeof(v) ) {
case "boolean":
d.putBoolean(k, v);
break;
case "string":
d.putString(k, v);
break;
case "number":
d.putDouble(k, v);
break;
default:
if ( v instanceof UnitValue ) {
var uc = new Object;
uc["px"] = charIDToTypeID("#Rlt"); // unitDistance
uc["%"] = charIDToTypeID("#Prc"); // unitPercent
d.putUnitDouble(k, uc[v.type], v.value);
} else {
throw( new Error("Unsupported type in objectToDescriptor " + typeof(v) ) );
return d;
// Function: descriptorToObject
// Usage: update a JavaScript Object from an ActionDescriptor
// Input: JavaScript Object (o), current object to update (output)
// Photoshop ActionDescriptor (d), descriptor to pull new params for object from
// object unique string (s)
// JavaScript Function (f), post process converter utility to convert
// Return: Nothing, update is applied to passed in JavaScript Object (o)
// NOTE: Only boolean, string, number and UnitValue are supported, use a post processor
// to convert (f) other types to one of these forms.
// REUSE: This routine is used in other scripts. Please update those if you
// modify. I am not using include or eval statements as I want these
// scripts self contained.
function descriptorToObject (o, d, s, f) {
var l = d.count;
if (l) {
var keyMessage = app.charIDToTypeID( 'Msge' );
if ( d.hasKey(keyMessage) && ( s != d.getString(keyMessage) )) return;
for (var i = 0; i < l; i++ ) {
var k = d.getKey(i); // i + 1 ?
var t = d.getType(k);
strk = app.typeIDToStringID(k);
switch (t) {
case DescValueType.BOOLEANTYPE:
o[strk] = d.getBoolean(k);
break;
case DescValueType.STRINGTYPE:
o[strk] = d.getString(k);
break;
case DescValueType.DOUBLETYPE:
o[strk] = d.getDouble(k);
break;
case DescValueType.UNITDOUBLE:
var uc = new Object;
uc[charIDToTypeID("#Rlt")] = "px"; // unitDistance
uc[charIDToTypeID("#Prc")] = "%"; // unitPercent
uc[charIDToTypeID("#Pxl")] = "px"; // unitPixels
var ut = d.getUnitDoubleType(k);
var uv = d.getUnitDoubleValue(k);
o[strk] = new UnitValue( uv, uc[ut] );
break;
case DescValueType.INTEGERTYPE:
case DescValueType.ALIASTYPE:
case DescValueType.CLASSTYPE:
case DescValueType.ENUMERATEDTYPE:
case DescValueType.LISTTYPE:
case DescValueType.OBJECTTYPE:
case DescValueType.RAWTYPE:
case DescValueType.REFERENCETYPE:
default:
throw( new Error("Unsupported type in descriptorToObject " + t ) );
if (undefined != f) {
o = f(o);
// Function: preProcessExportInfo
// Usage: convert Photoshop enums to strings for storage
// Input: JavaScript Object of my params for this script
// Return: JavaScript Object with objects converted for storage
function preProcessExportInfo(o) {
o.tiffCompression = o.tiffCompression.toString();
o.pdfEncoding = o.pdfEncoding.toString();
o.targaDepth = o.targaDepth.toString();
o.bmpDepth = o.bmpDepth.toString();
return o;
// Function: postProcessExportInfo
// Usage: convert strings from storage to Photoshop enums
// Input: JavaScript Object of my params in string form
// Return: JavaScript Object with objects in enum form
function postProcessExportInfo(o) {
o.tiffCompression = eval(o.tiffCompression);
o.pdfEncoding = eval(o.pdfEncoding);
o.targaDepth = eval(o.targaDepth);
o.bmpDepth = eval(o.bmpDepth);
return o;
// Function: StrToIntWithDefault
// Usage: convert a string to a number, first stripping all characters
// Input: string and a default number
// Return: a number
function StrToIntWithDefault( s, n ) {
var onlyNumbers = /[^0-9]/g;
var t = s.replace( onlyNumbers, "" );
t = parseInt( t );
if ( ! isNaN( t ) ) {
n = t;
return n;
// End X2L.jsxI have put the like var exportPath = "~/Desktop/Backdrops/png/"; and have removed the exportPath = exportPath + '/layers';
but when i run the script it still comes up with the error
could not complete action since the destination folder does not exist
if you are using the extendedscript toolkit would be able to run the script and see if you know were the problem is coming from i cant seem to understand why its not seeing the destination.
thanks for all your help
// enable double clicking from the Macintosh Finder or the Windows Explorer
#target photoshop
//=================================================================
// Globals
//=================================================================
var exportPath = "~/Desktop/Backdrops/png/";
// UI strings to be localized
var strTitle = localize("$$$/JavaScripts/X2L/Title=X2L");
var strButtonRun = localize("$$$/JavaScripts/X2L/Run=Run");
var strButtonCancel = localize("$$$/JavaScripts/X2L/Cancel=Cancel");
var strHelpText = localize("$$$/JavaScripts/X2L/Help=Please specify the format and location for saving each layer as a file.");
var strLabelDestination = localize("$$$/JavaScripts/X2L/Destination=Destination:");
var strButtonBrowse = localize("$$$/JavaScripts/X2L/Browse=&Browse...");
var strLabelFileNamePrefix = localize("$$$/JavaScripts/X2L/FileNamePrefix=File Name Prefix:");
var strCheckboxVisibleOnly = localize("$$$/JavaScripts/X2L/VisibleOnly=&Visible Layers Only");
var strLabelFileType = localize("$$$/JavaScripts/X2L/FileType=File Type:");
var strCheckboxIncludeICCProfile = localize("$$$/JavaScripts/X2L/IncludeICC=&Include ICC Profile");
var strJPEGOptions = localize("$$$/JavaScripts/X2L/JPEGOptions=JPEG Options:");
var strLabelQuality = localize("$$$/JavaScripts/X2L/Quality=Quality:");
var strCheckboxMaximizeCompatibility = localize("$$$/JavaScripts/X2L/Maximize=&Maximize Compatibility");
var strTIFFOptions = localize("$$$/JavaScripts/X2L/TIFFOptions=TIFF Options:");
var strLabelImageCompression = localize("$$$/JavaScripts/X2L/ImageCompression=Image Compression:");
var strNone = localize("$$$/JavaScripts/X2L/None=None");
var strPDFOptions = localize("$$$/JavaScripts/X2L/PDFOptions=PDF Options:");
var strLabelEncoding = localize("$$$/JavaScripts/X2L/Encoding=Encoding:");
var strTargaOptions = localize("$$$/JavaScripts/X2L/TargaOptions=Targa Options:");
var strLabelDepth = localize("$$$/JavaScripts/X2L/Depth=Depth:");
var strRadiobutton16bit = localize("$$$/JavaScripts/X2L/Bit16=16bit");
var strRadiobutton24bit = localize("$$$/JavaScripts/X2L/Bit24=24bit");
var strRadiobutton32bit = localize("$$$/JavaScripts/X2L/Bit32=32bit");
var strBMPOptions = localize("$$$/JavaScripts/X2L/BMPOptions=BMP Options:");
var strAlertSpecifyDestination = localize("$$$/JavaScripts/X2L/SpecifyDestination=Please specify destination.");
var strAlertDestinationNotExist = localize("$$$/JavaScripts/X2L/DestionationDoesNotExist=Destination does not exist.");
var strTitleSelectDestination = localize("$$$/JavaScripts/X2L/SelectDestination=Select Destination");
var strAlertDocumentMustBeOpened = localize("$$$/JavaScripts/X2L/OneDocument=You must have a document open to export!");
var strAlertNeedMultipleLayers = localize("$$$/JavaScripts/X2L/NoLayers=You need a document with multiple layers to export!");
var strAlertWasSuccessful = localize("$$$/JavaScripts/X2L/Success= was successful.");
var strUnexpectedError = localize("$$$/JavaScripts/X2L/Unexpected=Unexpected error");
var strMessage = localize("$$$/JavaScripts/X2L/Message=X2L");
var stretQuality = localize( "$$$/locale_specific/JavaScripts/X2L/ETQualityLength=30" );
var stretDestination = localize( "$$$/locale_specific/JavaScripts/X2L/ETDestinationLength=160" );
var strddFileType = localize( "$$$/locale_specific/JavaScripts/X2L/DDFileType=100" );
var strpnlOptions = localize( "$$$/locale_specific/JavaScripts/X2L/PNLOptions=100" );
var strPNG8Options = localize("$$$/JavaScripts/X2L/PNG8Options=PNG-8 Options:");
var strCheckboxPNGTransparency = localize("$$$/JavaScripts/X2L/Transparency=Transparency");
var strCheckboxPNGInterlaced = localize("$$$/JavaScripts/X2L/Interlaced=Interlaced");
var strCheckboxPNGTrm = localize("$$$/JavaScripts/X2L/Trim=Trim Layers");
var strPNG24Options = localize("$$$/JavaScripts/X2L/PNG24Options=PNG-24 Options:");
// the drop down list indexes for file type
var png24Index = 7;
main();
// Functions
// Function: main
// Usage: the core routine for this script
// Input: <none>
// Return: <none>
function main() {
if ( app.documents.length <= 0 ) {
if ( DialogModes.NO != app.playbackDisplayDialogs ) {
alert( strAlertDocumentMustBeOpened );
return 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
var exportInfo = new Object();
initExportInfo(exportInfo);
// look for last used params via Photoshop registry, getCustomOptions will throw if none exist
try {
catch(e) {
// it's ok if we don't have any options, continue with defaults
try {
var docName = app.activeDocument.name; // save the app.activeDocument name before duplicate.
var layerCount = app.documents[docName].layers.length;
var layerSetsCount = app.documents[docName].layerSets.length;
if ((layerCount <= 1)&&(layerSetsCount <= 0)) {
if ( DialogModes.NO != app.playbackDisplayDialogs ) {
alert( strAlertNeedMultipleLayers );
return 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
} else {
var rememberMaximize;
var needMaximize = exportInfo.psdMaxComp ? QueryStateType.ALWAYS : QueryStateType.NEVER;
app.activeDocument = app.documents[docName];
var duppedDocument = app.activeDocument.duplicate();
duppedDocument.activeLayer = duppedDocument.layers[duppedDocument.layers.length-1]; // for removing
setInvisibleAllArtLayers(duppedDocument);
exportChildren(duppedDocument, app.documents[docName], exportInfo, duppedDocument, exportInfo.fileNamePrefix);
duppedDocument.close( SaveOptions.DONOTSAVECHANGES );
if ( rememberMaximize != undefined ) {
app.preferences.maximizeCompatibility = rememberMaximize;
if ( DialogModes.ALL == app.playbackDisplayDialogs ) {
//alert(strTitle + strAlertWasSuccessful);
app.playbackDisplayDialogs = DialogModes.ALL;
} catch (e) {
if ( DialogModes.NO != app.playbackDisplayDialogs ) {
alert(e);
return 'cancel'; // quit, returning 'cancel' (dont localize) makes the actions palette not record our script
// Function: settingDialog
// Usage: pop the ui and get user settings
// Input: exportInfo object containing our parameters
// Return: on ok, the dialog info is set to the exportInfo object
function settingDialog(exportInfo) {
return;
// Function: hideAllFileTypePanel
// Usage: hide all the panels in the common actions
// Input: <none>, dlgMain is a global for this script
// Return: <none>, all panels are now hidden
function hideAllFileTypePanel() {
// Function: initExportInfo
// Usage: create our default parameters
// Input: a new Object
// Return: a new object with params set to default
function initExportInfo(exportInfo) {
//exportInfo.destination = new String(exportPath);
exportInfo.fileNamePrefix = new String("untitled_");
exportInfo.visibleOnly = false;
exportInfo.fileType = png24Index;
exportInfo.icc = true;
exportInfo.png24Transparency = true;
exportInfo.png24Interlaced = false;
exportInfo.png24Trim = true;
try {
exportInfo.destination = Folder(new String(exportPath)).fsName; // destination folder
var tmp = app.activeDocument.fullName.name;
exportInfo.fileNamePrefix = decodeURI(tmp.substring(0, tmp.indexOf("."))); // filename body part
} catch(someError) {
exportInfo.destination = new String(exportPath);
exportInfo.fileNamePrefix = app.activeDocument.name; // filename body part
// Function: saveFile
// Usage: the worker routine, take our params and save the file accordingly
// Input: reference to the document, the name of the output file,
// export info object containing more information
// Return: <none>, a file on disk
function saveFile( docRef, fileNameBody, exportInfo) {
saveFile(docRef, fileNameBody, exportInfo, false, true);
function saveFile( docRef, fileNameBody, exportInfo, interlacedValue, transparencyValue) {
var id6 = charIDToTypeID( "Expr" );
var desc3 = new ActionDescriptor();
var id7 = charIDToTypeID( "Usng" );
var desc4 = new ActionDescriptor();
var id8 = charIDToTypeID( "Op " );
var id9 = charIDToTypeID( "SWOp" );
var id10 = charIDToTypeID( "OpSa" );
desc4.putEnumerated( id8, id9, id10 );
var id11 = charIDToTypeID( "Fmt " );
var id12 = charIDToTypeID( "IRFm" );
var id13 = charIDToTypeID( "PN24" );
desc4.putEnumerated( id11, id12, id13 );
var id14 = charIDToTypeID( "Intr" );
desc4.putBoolean( id14, interlacedValue );
var id15 = charIDToTypeID( "Trns" );
desc4.putBoolean( id15, transparencyValue );
var id16 = charIDToTypeID( "Mtt " );
desc4.putBoolean( id16, true );
var id17 = charIDToTypeID( "MttR" );
desc4.putInteger( id17, 255 );
var id18 = charIDToTypeID( "MttG" );
desc4.putInteger( id18, 255 );
var id19 = charIDToTypeID( "MttB" );
desc4.putInteger( id19, 255 );
var id20 = charIDToTypeID( "SHTM" );
desc4.putBoolean( id20, false );
var id21 = charIDToTypeID( "SImg" );
desc4.putBoolean( id21, true );
var id22 = charIDToTypeID( "SSSO" );
desc4.putBoolean( id22, false );
var id23 = charIDToTypeID( "SSLt" );
var list1 = new ActionList();
desc4.putList( id23, list1 );
var id24 = charIDToTypeID( "DIDr" );
desc4.putBoolean( id24, false );
var id25 = charIDToTypeID( "In " );
desc4.putPath( id25, new File( exportPath + "C:/Users/Tim/Desktop/Backdrops/png/" + fileNameBody + ".png") );
var id26 = stringIDToTypeID( "SaveForWeb" );
desc3.putObject( id7, id26, desc4 );
executeAction( id6, desc3, DialogModes.NO );
// Function: zeroSuppress
// Usage: return a string padded to digit(s)
// Input: num to convert, digit count needed
// Return: string padded to digit length
function zeroSuppress (num, digit) {
var tmp = num.toString();
while (tmp.length < digit) {
tmp = "0" + tmp;
return tmp;
// Function: setInvisibleAllArtLayers
// Usage: unlock and make invisible all art layers, recursively
// Input: document or layerset
// Return: all art layers are unlocked and invisible
function setInvisibleAllArtLayers(obj) {
for( var i = 0; i < obj.artLayers.length; i++) {
obj.artLayers[i].allLocked = false;
obj.artLayers[i].visible = false;
for( var i = 0; i < obj.layerSets.length; i++) {
setInvisibleAllArtLayers(obj.layerSets[i]);
// Function: removeAllInvisibleArtLayers
// Usage: remove all the invisible art layers, recursively
// Input: document or layer set
// Return: <none>, all layers that were invisible are now gone
function removeAllInvisibleArtLayers(obj) {
for( var i = obj.artLayers.length-1; 0 <= i; i--) {
try {
if(!obj.artLayers[i].visible) {
obj.artLayers[i].remove();
catch (e) {
for( var i = obj.layerSets.length-1; 0 <= i; i--) {
removeAllInvisibleArtLayers(obj.layerSets[i]);
// Function: removeAllEmptyLayerSets
// Usage: find all empty layer sets and remove them, recursively
// Input: document or layer set
// Return: empty layer sets are now gone
function removeAllEmptyLayerSets(obj) {
var foundEmpty = true;
for( var i = obj.layerSets.length-1; 0 <= i; i--) {
if( removeAllEmptyLayerSets(obj.layerSets[i])) {
obj.layerSets[i].remove();
} else {
foundEmpty = false;
if (obj.artLayers.length > 0) {
foundEmpty = false;
return foundEmpty;
// Function: zeroSuppress
// Usage: return a string padded to digit(s)
// Input: num to convert, digit count needed
// Return: string padded to digit length
function removeAllInvisible(docRef) {
removeAllInvisibleArtLayers(docRef);
removeAllEmptyLayerSets(docRef);
// Function: exportChildren
// Usage: find all the children in this document to save
// Input: duplicate document, original document, export info,
// reference to document, starting file name
// Return: <none>, documents are saved accordingly
function exportChildren(dupObj, orgObj, exportInfo, dupDocRef, fileNamePrefix) {
for( var i = 0; i < dupObj.artLayers.length; i++) {
if (exportInfo.visibleOnly) { // visible layer only
if (!orgObj.artLayers[i].visible) {
continue;
dupObj.artLayers[i].visible = true;
var layerName = dupObj.artLayers[i].name; // store layer name before change doc
var duppedDocumentTmp = dupDocRef.duplicate();
if ((png24Index == exportInfo.fileType)||(png8Index == exportInfo.fileType)) { // PSD: Keep transparency
removeAllInvisible(duppedDocumentTmp);
//PNGFileOptions
if (activeDocument.activeLayer.isBackgroundLayer == false) { //is it anything but a background layer?
app.activeDocument.trim(TrimType.TRANSPARENT);
} else { // just flatten
duppedDocumentTmp.flatten();
// Edit
var docName = app.activeDocument.name;
// For some reason indexOf fails if we include the '-', so we use 'copy' and decrement the index by 1.
docName = docName.slice(0, docName.indexOf('copy')-1);
var fileNameBody = (docName+'_'+layerName).toLowerCase();
fileNameBody = fileNameBody.replace(/[:\/\\*\?\"\<\>\|]/g, "_"); // '/\:*?"<>|' -> '_'
if (fileNameBody.length > 120) {
fileNameBody = fileNameBody.substring(0,120);
saveFile(duppedDocumentTmp, fileNameBody, exportInfo);
duppedDocumentTmp.close(SaveOptions.DONOTSAVECHANGES);
dupObj.artLayers[i].visible = false;
for( var i = 0; i < dupObj.layerSets.length; i++) {
if (exportInfo.visibleOnly) { // visible layer only
if (!orgObj.layerSets[i].visible) {
continue;
var fileNameBody = fileNamePrefix;
fileNameBody += "_" + zeroSuppress(i, 4) + "s";
exportChildren(dupObj.layerSets[i], orgObj.layerSets[i], exportInfo, dupDocRef, fileNameBody); // recursive call
// Function: objectToDescriptor
// Usage: create an ActionDescriptor from a JavaScript Object
// Input: JavaScript Object (o)
// object unique string (s)
// Pre process converter (f)
// Return: ActionDescriptor
// NOTE: Only boolean, string, number and UnitValue are supported, use a pre processor
// to convert (f) other types to one of these forms.
// REUSE: This routine is used in other scripts. Please update those if you
// modify. I am not using include or eval statements as I want these
// scripts self contained.
function objectToDescriptor (o, s, f) {
o = {};
var d = new ActionDescriptor;
var l = o.reflect.properties.length;
d.putString( app.charIDToTypeID( 'Msge' ), s );
for (var i = 0; i < l; i++ ) {
var k = o.reflect.properties[i].toString();
if (k == "__proto__" || k == "__count__" || k == "__class__" || k == "reflect")
continue;
var v = o[ k ];
k = app.stringIDToTypeID(k);
switch ( typeof(v) ) {
case "boolean":
d.putBoolean(k, v);
break;
case "string":
d.putString(k, v);
break;
case "number":
d.putDouble(k, v);
break;
default:
if ( v instanceof UnitValue ) {
var uc = new Object;
uc["px"] = charIDToTypeID("#Rlt"); // unitDistance
uc["%"] = charIDToTypeID("#Prc"); // unitPercent
d.putUnitDouble(k, uc[v.type], v.value);
} else {
throw( new Error("Unsupported type in objectToDescriptor " + typeof(v) ) );
return d;
// Function: descriptorToObject
// Usage: update a JavaScript Object from an ActionDescriptor
// Input: JavaScript Object (o), current object to update (output)
// Photoshop ActionDescriptor (d), descriptor to pull new params for object from
// object unique string (s)
// JavaScript Function (f), post process converter utility to convert
// Return: Nothing, update is applied to passed in JavaScript Object (o)
// NOTE: Only boolean, string, number and UnitValue are supported, use a post processor
// to convert (f) other types to one of these forms.
// REUSE: This routine is used in other scripts. Please update those if you
// modify. I am not using include or eval statements as I want these
// scripts self contained.
function descriptorToObject (o, d, s, f) {
var l = d.count;
if (l) {
var keyMessage = app.charIDToTypeID( 'Msge' );
if ( d.hasKey(keyMessage) && ( s != d.getString(keyMessage) )) return;
for (var i = 0; i < l; i++ ) {
var k = d.getKey(i); // i + 1 ?
var t = d.getType(k);
strk = app.typeIDToStringID(k);
switch (t) {
case DescValueType.BOOLEANTYPE:
o[strk] = d.getBoolean(k);
break;
case DescValueType.STRINGTYPE:
o[strk] = d.getString(k);
break;
case DescValueType.DOUBLETYPE:
o[strk] = d.getDouble(k);
break;
case DescValueType.UNITDOUBLE:
var uc = new Object;
uc[charIDToTypeID("#Rlt")] = "px"; // unitDistance
uc[charIDToTypeID("#Prc")] = "%"; // unitPercent
uc[charIDToTypeID("#Pxl")] = "px"; // unitPixels
var ut = d.getUnitDoubleType(k);
var uv = d.getUnitDoubleValue(k);
o[strk] = new UnitValue( uv, uc[ut] );
break;
case DescValueType.INTEGERTYPE:
case DescValueType.ALIASTYPE:
case DescValueType.CLASSTYPE:
case DescValueType.ENUMERATEDTYPE:
case DescValueType.LISTTYPE:
case DescValueType.OBJECTTYPE:
case DescValueType.RAWTYPE:
case DescValueType.REFERENCETYPE:
default:
throw( new Error("Unsupported type in descriptorToObject " + t ) );
if (undefined != f) {
o = f(o);
// Function: preProcessExportInfo
// Usage: convert Photoshop enums to strings for storage
// Input: JavaScript Object of my params for this script
// Return: JavaScript Object with objects converted for storage
function preProcessExportInfo(o) {
o.tiffCompression = o.tiffCompression.toString();
o.pdfEncoding = o.pdfEncoding.toString();
o.targaDepth = o.targaDepth.toString();
o.bmpDepth = o.bmpDepth.toString();
return o;
// Function: postProcessExportInfo
// Usage: convert strings from storage to Photoshop enums
// Input: JavaScript Object of my params in string form
// Return: JavaScript Object with objects in enum form
function postProcessExportInfo(o) {
o.tiffCompression = eval(o.tiffCompression);
o.pdfEncoding = eval(o.pdfEncoding);
o.targaDepth = eval(o.targaDepth);
o.bmpDepth = eval(o.bmpDepth);
return o;
// Function: StrToIntWithDefault
// Usage: convert a string to a number, first stripping all characters
// Input: string and a default number
// Return: a number
function StrToIntWithDefault( s, n ) {
var onlyNumbers = /[^0-9]/g;
var t = s.replace( onlyNumbers, "" );
t = parseInt( t );
if ( ! isNaN( t ) ) {
n = t;
return n;
// End X2L.jsx -
Action batch export issue with image trace
So, currently I'm working on batch processing jpeg sequences using illustrator's image trace and distortion effects. I have batch exported the image traces of the sequences via Adobe bridge. Now I'm trying to create an action which opens the .ai files containing those image traces, apply a graphic style to the trace, and export a png from that. I'm banging my head against the wall trying to get this to work right now. If I do the steps (step by step... not using a recorded action) I want on a single file, it works great, but the moment I batch export using the action I've created, it puts the original .png image that the image trace was linked to, on top of the image. The result is a bunch of .png exports that look exactly like my original image sequence. If I add a "save" function to the action and open the resulting .ai files, I can see that the image trace vectors are in the file. The "linked png" however visible on the layer above those vectors. Anyone have any idea what I'm doing wrong? How do I get rid of that pesky linked image.
Also, for anyone who might be thinking that it has something to do with expanding the image trace before applying effects, this issue I'm running into, I've determined, is happening higher up in the hierarchy of the actions... If I simply make an action to open the image trace illustrator file and save it back out, the same issue occurs... placing the .png "linked file" on top of the vector image.
While I'm at it, I might as well ask if anyone knows how to change the illustrator default image trace preset.... Without being able to change it, or much less specify in the action sequence that I'd like to use a user created image trace preset rather than the default setting, it's greatly overcomplicating my workflow. Makes what could easily be one-step batch processing into two. Seems pretty silly if you ask me.
Please, if you guys have any insights on this, let me know. It's super frustrating... By the way, if you're wondering what type of effect I'm going for, the idea (as well as some explanation into their own process) starts at 12:44 of this video (http://vimeo.com/77427470).
THANKS!Just wanted to let you guys know, for anyone who might be having my same issue... My home computer, even after a fresh install of Illustrator, was still placing the linked jpeg over the traced vector shapes when batch exporting... I did however find a workaround. Rather than using Bridge CS6 for the batch image tracing, I used Bridge CS5 to trace in Illustrator CS5. Then, I used Illustrator CS6 to batch export an action that imported and applied an effect to those image traced sequences. When you do this, it forces you to expand the tracing on import (because of the difference in Illustrator versions I'm assuming). This way, when you batch run the action, it's already working with expanded vector shapes. Not sure why this works, but it does.
Also, I was having some issues getting Illustrator to apply the graphic style when batch exporting. I got it to work by copying an object with that particular graphic style to the clipboard, then adding in the action I was running a "paste" command, followed by a "clear" command. I can only assume that Illustrator was having issues loading custom graphics styles while batch exporting. The paste/delete technique is annoying, but gets it done.
Anyways. Just wanted to check in on this one. I'm happy I was able to muscle my way through it all. -
Problem in Batch Export Report
Hi all,
I have developed a report in PP module for Batch exports.
Here iam providing the input as plant, material no & batch and the output will be Orderwise material no, batch, mat desc, density and Quantity.
While executing the report the output is coming exactly for the first order while for the second order the values are not fetching correctly.
Pls suggest me.
*& Report ZPP_EXPORTBATCH
REPORT ZPP_EXPORTBATCH.
TABLES: MSEG,MKPF,AUFK,AFPO. "
TYPE-POOLS SLIS.
DATA: IT_EVENTS TYPE SLIS_T_EVENT,
WA_EVENTS TYPE SLIS_ALV_EVENT,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
LIST_LAYOUT TYPE SLIS_LAYOUT_ALV, "#EC *
GS_KEYINFO TYPE SLIS_KEYINFO_ALV, "#EC *
W_PROG TYPE SY-REPID,
P_RS_LINEINFO TYPE SLIS_LINEINFO.
Internal Tables**********************************
TYPES: TY_SCLASS TYPE STANDARD TABLE OF SCLASS.
TYPES: TY_OBJECTDATA TYPE STANDARD TABLE OF CLOBJDAT.
TYPES: BEGIN OF T_MSEG,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
MAKTX LIKE MAKT-MAKTX,
CHARG LIKE MSEG-CHARG,
MENGE LIKE MSEG-MENGE,
ERFME LIKE MSEG-ERFME,
AUFNR LIKE MSEG-AUFNR,
AUSP1 LIKE CLOBJDAT-AUSP1,
ERROR(30),
END OF T_MSEG.
TYPES: INT_MSEG_FINAL TYPE STANDARD TABLE OF T_MSEG .
TYPES: BEGIN OF TY_MENGE1,
MATNR TYPE MSEG-MATNR,
CHARG TYPE MSEG-CHARG,
MENGE TYPE MSEG-MENGE,
ERFME TYPE MSEG-ERFME,
MBLNR TYPE MSEG-MBLNR,
ZEILE TYPE MSEG-ZEILE,
END OF TY_MENGE1.
TYPES: TY_MENGE TYPE STANDARD TABLE OF TY_MENGE1.
DATA : LENGTH TYPE I,
DIFFERENCE TYPE I,
IT_CLASS TYPE TY_SCLASS,
IT_OBJECTDATA TYPE TY_OBJECTDATA,
WA_CLASS TYPE SCLASS,
WA_OBJECTDATA TYPE CLOBJDAT,
L_MATNR TYPE MATNR,
INT_MSEG_FINAL TYPE INT_MSEG_FINAL,
WA_MSEG_FINAL TYPE T_MSEG,
WA_MSEG TYPE MSEG,
WA_WEMNG TYPE AFPO-WEMNG,
WA_PSMNG TYPE AFPO-PSMNG,
WA_AMEIN TYPE AFPO-AMEIN,
BAL_QTY TYPE AFPO-WEMNG,
INT_MSEG_TEMP1 TYPE INT_MSEG_FINAL,
WA_CALCULATED1 TYPE AFPO-WEMNG,
IT_MENGE TYPE TY_MENGE,
WA_MENGE1 TYPE TY_MENGE1,
WA_MAKTX TYPE MAKT-MAKTX,
WA_HSDAT TYPE MCH1-HSDAT,
WA_MAKTX_MAIN TYPE MAKT-MAKTX,
MAIN_DEN TYPE STRING,
DENSITY TYPE STRING,
MDENSITY TYPE STRING,
IDENSITY TYPE STRING.
data : tqty like mseg-menge.
data:INT_MSEG_TEMP2 LIKE MSEG OCCURS 0 WITH HEADER LINE.
data:INT_MSEG_TEMP3 LIKE MSEG OCCURS 0 WITH HEADER LINE.
**************Initialization********************************************
INITIALIZATION.
**************Input Parameters List*************************************
SELECTION-SCREEN SKIP 3.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK1 WITH FRAME TITLE TEXT-T01 . "#EC
SELECT-OPTIONS : S_WERKS FOR MSEG-WERKS OBLIGATORY, "PLANT
S_MATNR FOR MSEG-MATNR OBLIGATORY, "MATERIAL NUMBER
S_CHARG FOR MSEG-CHARG, "BATCH
S_BUDAT FOR MKPF-BUDAT. "POSTING DATE
SELECTION-SCREEN END OF BLOCK BLOCK1.
START-OF-SELECTION.
PERFORM READ_DATA.
PERFORM SUB_PREPARE_FIELDCATALOG.
PERFORM FILL_EVENTS_TABLE.
END-OF-SELECTION.
PERFORM DISPLAY_DATA_USING_GRID.
*& Form READ_DATA
text
--> p1 text
<-- p2 text
FORM READ_DATA .
DATA :INT_AFPO LIKE AFPO OCCURS 0 WITH HEADER LINE.
DATA :INT_MSEG LIKE MSEG OCCURS 0 WITH HEADER LINE,
INT_MSEG_TEMP LIKE MSEG OCCURS 0 WITH HEADER LINE.
SELECT SINGLE MAKTX
INTO WA_MAKTX_MAIN
FROM MAKT
WHERE MATNR IN S_MATNR.
DATA : WA_MENGE LIKE MSEG-MENGE.
SELECT SINGLE *
FROM AFPO
INTO INT_AFPO
WHERE MATNR IN S_MATNR
AND CHARG IN S_CHARG
AND DWERK IN S_WERKS.
MOVE INT_AFPO-WEMNG TO WA_WEMNG.
MOVE INT_AFPO-PSMNG TO WA_PSMNG.
MOVE INT_AFPO-AMEIN TO WA_AMEIN.
SELECT *
INTO TABLE INT_MSEG
FROM MSEG
WHERE AUFNR = INT_AFPO-AUFNR
AND BWART IN ('261' , '262' )
AND WERKS IN S_WERKS.
REFRESH INT_AFPO.
int_mseg_temp3[] = int_mseg[].
LOOP AT INT_MSEG.
clear tqty.
loop at int_mseg_temp3 WHERE MATNR = INT_MSEG-MATNR
and charg = int_mseg-charg
AND AUFNR = INT_MSEG-AUFNR
if int_mseg_temp3-bwart = '261' .
tqty = tqty + int_mseg_temp3-menge.
elseif int_mseg_temp3-bwart = '262'.
tqty = tqty - int_mseg_temp3-menge.
endif.
endloop.
int_mseg-menge = tqty.
SELECT SINGLE *
FROM AFPO
INTO INT_AFPO
WHERE MATNR = INT_MSEG-MATNR
AND CHARG = INT_MSEG-CHARG
AND DWERK IN S_WERKS.
IF SY-SUBRC EQ 0 AND INT_AFPO-AUFNR <> ' '.
SELECT * FROM MSEG
INTO TABLE INT_MSEG_TEMP
WHERE AUFNR = INT_AFPO-AUFNR
AND BWART IN ('261' , '262' )
AND WERKS IN S_WERKS.
LOOP AT INT_MSEG_TEMP.
WA_CALCULATED1 = ( INT_MSEG_TEMP-MENGE / INT_AFPO-WEMNG ) * INT_MSEG-MENGE.
WA_MENGE1-MENGE = WA_CALCULATED1.
WA_MENGE1-MATNR = INT_MSEG_TEMP-MATNR.
WA_MENGE1-CHARG = INT_MSEG_TEMP-CHARG.
WA_MENGE1-ERFME = INT_MSEG_TEMP-ERFME.
WA_MENGE1-MBLNR = INT_MSEG_TEMP-MBLNR.
WA_MENGE1-ZEILE = INT_MSEG_TEMP-ZEILE.
APPEND WA_MENGE1 TO IT_MENGE.
CLEAR: WA_CALCULATED1, WA_MENGE1.
ENDLOOP.
SORT IT_MENGE BY MBLNR ZEILE MATNR CHARG.
ENDLOOP.
CLEAR INT_MSEG.
MODIFY TABLE INT_MSEG FROM INT_MSEG_TEMP.
LOOP AT INT_MSEG_TEMP.
MOVE-CORRESPONDING INT_MSEG_TEMP TO INT_MSEG.
READ TABLE IT_MENGE INTO WA_MENGE1
WITH KEY MATNR = INT_MSEG_TEMP-MATNR
CHARG = INT_MSEG_TEMP-CHARG
MBLNR = INT_MSEG_TEMP-MBLNR
ZEILE = INT_MSEG_TEMP-ZEILE.
INT_MSEG-MENGE = WA_MENGE1-MENGE.
APPEND INT_MSEG.
CLEAR INT_MSEG.
*Added for Changes given by anup ART:09MAR08
CLEAR WA_MENGE1-MENGE.
*End of for Changes given by anup ART:09MAR08
ENDLOOP.
REFRESH INT_MSEG_TEMP.
CLEAR INT_AFPO.
ELSE.
MOVE: INT_MSEG-MATNR TO WA_MSEG_FINAL-MATNR,
INT_MSEG-CHARG TO WA_MSEG_FINAL-CHARG,
INT_MSEG-MENGE TO WA_MSEG_FINAL-MENGE,
INT_MSEG-ERFME TO WA_MSEG_FINAL-ERFME,
INT_MSEG-BWART TO WA_MSEG_FINAL-BWART .
APPEND WA_MSEG_FINAL TO INT_MSEG_FINAL.
CLEAR WA_MSEG_FINAL.
CLEAR INT_AFPO.
ENDIF.
ENDLOOP.
INT_MSEG_TEMP1[] = INT_MSEG_FINAL[].
REFRESH INT_MSEG_FINAL.
SORT INT_MSEG_TEMP1 BY MATNR CHARG.
LOOP AT INT_MSEG_TEMP1 INTO WA_MSEG_FINAL.
ON CHANGE OF WA_MSEG_FINAL-MATNR
OR WA_MSEG_FINAL-CHARG.
IF WA_MSEG_FINAL-BWART = '261'.
WA_MENGE = WA_MENGE + WA_MSEG_FINAL-MENGE.
ELSEIF WA_MSEG_FINAL-BWART = '262'.
WA_MENGE = WA_MENGE - WA_MSEG_FINAL-MENGE.
ENDIF.
WA_MSEG_FINAL-MENGE = WA_MENGE.
CLEAR WA_MENGE.
APPEND WA_MSEG_FINAL TO INT_MSEG_FINAL.
CLEAR WA_MSEG_FINAL.
ENDON.
ENDLOOP.
LOOP AT INT_MSEG_FINAL INTO WA_MSEG_FINAL.
SELECT SINGLE MAKTX
INTO WA_MAKTX
FROM MAKT
WHERE MATNR = WA_MSEG_FINAL-MATNR.
WA_MSEG_FINAL-MAKTX = WA_MAKTX.
MODIFY INT_MSEG_FINAL FROM WA_MSEG_FINAL TRANSPORTING MAKTX.
CLEAR WA_MAKTX.
****************CHGS BY MURALI.C FOR
DATA: WA_OBJECT(50) TYPE C.
LENGTH = STRLEN( WA_MSEG_FINAL-MATNR ).
IF LENGTH LT 18.
DIFFERENCE = 18 - LENGTH.
DO DIFFERENCE TIMES.
CONCATENATE WA_MSEG_FINAL-MATNR SPACE INTO L_MATNR.
ENDDO.
ENDIF.
CONCATENATE L_MATNR WA_MSEG_FINAL-CHARG INTO WA_OBJECT RESPECTING
BLANKS.
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
EXPORTING
CLASS = ' '
CLASSTEXT = 'X'
CLASSTYPE = '023'
CLINT = 0
FEATURES = 'X'
LANGUAGE = SY-LANGU
OBJECT = WA_OBJECT
OBJECTTABLE = 'MCH1'
KEY_DATE = SY-DATUM
INITIAL_CHARACT = 'X'
NO_VALUE_DESCRIPT = NO_VALUE_DESCRIPT
CHANGE_SERVICE_CLF = 'X'
INHERITED_CHAR = ' '
CHANGE_NUMBER = ' '
TABLES
T_CLASS = IT_CLASS
T_OBJECTDATA = IT_OBJECTDATA
I_SEL_CHARACTERISTIC = I_SEL_CHARACTERISTIC
T_NO_AUTH_CHARACT = T_NO_AUTH_CHARACT
EXCEPTIONS
NO_CLASSIFICATION = 1
NO_CLASSTYPES = 2
INVALID_CLASS_TYPE = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
read TABLE IT_OBJECTDATA INTO wa_objectdata
with KEY SMBEZ = 'Density'.
if wa_objectdata-ausp1 <> '?'.
perform density_calc using wa_objectdata-ausp1 changing idensity.
WA_MSEG_FINAL-AUSP1 = idensity.
else.
WA_MSEG_FINAL-ERROR = 'classification value missing'.
endif.
MODIFY INT_MSEG_FINAL FROM WA_MSEG_FINAL TRANSPORTING AUSP1 ERROR.
CLEAR :WA_MSEG_FINAL-MATNR,WA_MSEG_FINAL-CHARG,WA_MSEG_FINAL-AUSP1,WA_OBJECT,WA_OBJECTDATA-AUSP1.
ENDLOOP.
ENDFORM. " READ_DATA
*& Form SUB_PREPARE_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM SUB_PREPARE_FIELDCATALOG .
X_FIELDCAT-FIELDNAME = 'MATNR'.
X_FIELDCAT-TABNAME = 'INT_MSEG_FINAL'.
X_FIELDCAT-SELTEXT_M = 'MATERIAL NUMBER'. "#EC NOTEXT
X_FIELDCAT-JUST = 'C'.
X_FIELDCAT-OUTPUTLEN = 10.
X_FIELDCAT-KEY = 'X'.
X_FIELDCAT-KEY_SEL = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'MAKTX'.
X_FIELDCAT-TABNAME = 'INT_MSEG_FINAL'.
X_FIELDCAT-SELTEXT_M = 'MATERIAL DESCRIPTION'. "#EC NOTEXT
X_FIELDCAT-JUST = 'C'.
X_FIELDCAT-OUTPUTLEN = 17.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'CHARG'.
X_FIELDCAT-TABNAME = 'INT_MSEG_FINAL'.
X_FIELDCAT-SELTEXT_M = 'BATCH'. "#EC NOTEXT
X_FIELDCAT-JUST = 'C'.
X_FIELDCAT-OUTPUTLEN = 10.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'AUSP1'.
X_FIELDCAT-TABNAME = 'INT_MSEG_FINAL'.
X_FIELDCAT-SELTEXT_M = 'DENSITY'. "#EC NOTEXT
X_FIELDCAT-JUST = 'C'.
X_FIELDCAT-OUTPUTLEN = 6.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'MENGE'.
X_FIELDCAT-TABNAME = 'INT_MSEG_FINAL'.
X_FIELDCAT-SELTEXT_M = 'QUANTITY'. "#EC NOTEXT
X_FIELDCAT-JUST = 'C'.
X_FIELDCAT-OUTPUTLEN = 9.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'ERFME'.
X_FIELDCAT-TABNAME = 'INT_MSEG_FINAL'.
X_FIELDCAT-SELTEXT_M = 'UOM'. "#EC NOTEXT
X_FIELDCAT-JUST = 'C'.
X_FIELDCAT-OUTPUTLEN = 9.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
*X_FIELDCAT-FIELDNAME = 'EDATU1'.
X_FIELDCAT-TABNAME = 'INT_MSEG_FINAL'.
X_FIELDCAT-SELTEXT_M = 'CONFIRMED QUANTITY DATED'. "#EC NOTEXT
X_FIELDCAT-JUST = 'C'.
X_FIELDCAT-OUTPUTLEN = 9.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'ETENR1'.
X_FIELDCAT-TABNAME = 'INT_MSEG_FINAL'.
X_FIELDCAT-SELTEXT_M = 'CONFIRM SL NO'. "#EC NOTEXT
X_FIELDCAT-JUST = 'C'.
X_FIELDCAT-OUTPUTLEN = 9.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'LFIMG'.
X_FIELDCAT-TABNAME = 'INT_MSEG_FINAL'.
X_FIELDCAT-SELTEXT_M = 'DELIVERED QUANTITY'. "#EC NOTEXT
X_FIELDCAT-JUST = 'C'.
X_FIELDCAT-OUTPUTLEN = 18.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'ERDAT'.
X_FIELDCAT-TABNAME = 'INT_MSEG_FINAL'.
X_FIELDCAT-SELTEXT_M = 'DELIVERED DATE'. "#EC NOTEXT
X_FIELDCAT-JUST = 'C'.
X_FIELDCAT-OUTPUTLEN = 18.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
ENDFORM. " SUB_PREPARE_FIELDCATALOG
*& Form FILL_EVENTS_TABLE
text
--> p1 text
<-- p2 text
FORM FILL_EVENTS_TABLE .
WA_EVENTS-NAME = 'TOP_OF_PAGE'.
WA_EVENTS-FORM = 'PRINT_HEADING'.
APPEND WA_EVENTS TO IT_EVENTS.
ENDFORM. " FILL_EVENTS_TABLE
FORM PRINT_HEADING. "#EC CALLED
DATA IT_HEADINGS TYPE SLIS_T_LISTHEADER.
DATA WA_HEADINGS LIKE LINE OF IT_HEADINGS.
CLEAR WA_HEADINGS.
WA_HEADINGS-TYP = 'H'.
WA_HEADINGS-INFO = ' '.
WA_HEADINGS-TYP = 'H'.
WA_HEADINGS-INFO = ' BATCH EXPORT DETAILS REPORT '.
APPEND WA_HEADINGS TO IT_HEADINGS.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_HEADINGS
I_LOGO = 'APARLOGO' .
ENDFORM. "PRINT_HEADING
*& Form DISPLAY_DATA_USING_GRID
text
--> p1 text
<-- p2 text
FORM DISPLAY_DATA_USING_GRID .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BYPASSING_BUFFER = 'X'
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-CPROG
IT_FIELDCAT = IT_FIELDCAT
I_SAVE = 'A'
IT_EVENTS = IT_EVENTS
TABLES
T_OUTTAB = INT_MSEG_FINAL
IF SY-SUBRC <> 0. "#EC *
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_DATA_USING_GRID
*& Form density_calc
text
-->P_WA_OBJECTDATA_AUSP1 text
<--P_IDENSITY text
FORM density_calc USING WA_OBJECTDATA_AUSP1
CHANGING DENSITY.
data: den type float,density1(8).
density1(8) = wa_objectdata-ausp1.
call function 'CHAR_FLTP_CONVERSION'
exporting
DYFLD = ' '
MASKN = ' '
MAXDEC = '16'
MAXEXP = '59+'
MINEXP = '60-'
string = density1
MSGTYP_DECIM = 'W'
importing
DECIM =
EXPON =
flstr = den
IVALU =
EXCEPTIONS
EXPONENT_TOO_BIG = 1
EXPONENT_TOO_SMALL = 2
STRING_NOT_FLTP = 3
TOO_MANY_DECIM = 4
OTHERS = 5
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
if den gt 0.
density = 1 / den.
density = density(5).
density = density / 10.
den = strlen( density ).
if den ge 6.
density = density(6).
clear: den.
den = strlen( density ).
elseif den lt 6.
density = density.
clear: den.
den = strlen( density ).
endif.
else.
density = '0.000'.
endif.
den = strlen( density ).
data: den3(5) type c.
if den gt 3.
case den.
when '6'.
clear: den3.
compute den3 = 10000 * ( density(6) - density(5) ).
if den3 between 6 and 9.
clear: den3.
compute den3(2) = 10000 * ( density(5) - density(4) ).
compute den3 = den3(1) + 1.
compute den3 = den3 / 1000.
compute density = density(4) + den3.
endif.
when '5'.
clear: den3.
compute den3 = 1000 * ( density(5) - density(4) ).
if den3 between 6 and 9.
clear: den3.
compute den3(2) = 1000 * ( density(4) - density(3) ).
compute den3 = den3(1) + 1.
compute den3 = den3 / 100.
compute density = density(3) + den3.
endif.
endcase.
endif.
density = density(5).
ENDFORM. " density_calcHello,
I haven't checked the code but from the symptom you describe it could be possible that some fields used to calculate valeus are not getting cleared between calculations. This could result in some values from order the first order one being used in the calculation for values in the second order.
Regards,
Steve.
Maybe you are looking for
-
Flow of tables information between sap and java
How should i pass the table information from sap to java. and how to process the data of a table in the java program. i had seen the examples of JCO. BUT I IS VERY CONFUSING (BCOZ I DON'T KNOW JAVA). PLZ IF U DON'T MIND SEND ME CODE SNIPPET TO 1.GET
-
Ipod rebooting during/after update
My 30g video iPod is rebooting during or after I attempt to update. Nothing is saving to the iPod during these updates. I have done the 5 Rs, reformatted my iPod, as something was horribly corrupt. Now I have this new problem. I am at a complete loss
-
Where is the chat/type progress notification in BBM 10? Has it been removed....
When in conversation with someone through BBM with my new Q10, I no longer see the notification that they are typing as in previous versions of BBM. Has it been removed? Thanks.
-
Does ios7 work on original iPad
My mom has an original iPad. is it compatible with iOS7? When I went to software updates, it came up with none available. Her iPad is still running iOS5.
-
How do I screen capture an internet page to copy to a file?
I am recently trying to adjust to a Mac system from PC. Simple Question... How can I screen capture an internet page to copy it to a file?