Batch file to change routers Wireless name

Hi Guys, i have a wireless router Netgear N150.
By default this router has a name & i want to change this name to a desired name by batch file or by any scripting language.
Any ideas or suggestions??? i would be grateful to you guys.
Thank you

Netgear firmware release 40 is required on routers that support soap:
http://kb.netgear.com/app/answers/detail/a_id/24497/~/wndr4500-firmware-version-1.0.1.40
It is clear that all routers will now support both SOAP and OMI. Many currently support SNMP but most small routers and devices do not.e
All Cisco routers support telnt except the consumer routers. If you bought your router at Staples or Best Buy it will likely not support telnet.
¯\_(ツ)_/¯

Similar Messages

Use of xsdconfig file to change doc. elmt. name?

I've got the following simple xsd file:
<?xml version="1.0"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="/my/ns"
elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:element name="Outer">
<xs:complexType>
<xs:sequence>
<xs:element name="Inner1" type="xs:string" />
<xs:element name="Inner2" type="xs:string" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
Which produces a "document" class named OuterDocument with a member "element"
class named Outer.
But let's say I need a different name, so I use the xsdconfig capabilitiy to direct
the name change. Here's the xsdconfig file:
<?xml version="1.0"?>
<xb:config xmlns:xb="http://www.bea.com/2002/09/xbean/config"
xmlns:xai="/my/ns">
<xb:qname name="xai:Outer"
javaname="NotInner"/>
</xb:config>
I now get a document class named NotInner with an element class not very elegantly
named NotInner2. Ideally I'd either like a NotInnerDocument with element NoInner,
or I'd like to specify name transformations for both. Is there any way to do
this?
Thanks in advance for any advise.

Hi,
Letting an application edit files to change names and terms looks like an ugly solution, apart from any difficulties that arise (such as rights on directories and files). I think it's best to create a separate output (one project, multiple webhelp outputs) each specified for the client.
To do this, I can come up with three usefull features:
1. CBT's: look into conditional build tags. With these, you can keep topics/text/etc out of certain outputs.
2. Variables. In RH8, you can create multiple sets of those (same variable, different value) and use the separate sets for separate outputs.
3. Multiple style sheets. In RH8, you can select which style sheet you want to use for your topics when you create the webhelp. You can create a separate style sheet for every different brand and use those style sheets when you output your files.
Hope this helps,
Willam
This e-mail is personal. For our full disclaimer, please visit www.centric.eu/disclaimer.

Dynamic Help File To Change Brand & Product Name. How To Do Please?

I was wondering if someone could point me in the right direction. We have a help file that is created and we have companies that want to OEM (white label) our product. One of the challenges is that the help file thus needs to become dynamic to update brand and product name references. Can someone tell me how can we go about this in RoboHelp please. The program that initiates the help file can obviously write to a file so possibly this is an option.
Thank you in advance for your consideration, assistance and guidance.
Kind regards
Howard

Hi,
Letting an application edit files to change names and terms looks like an ugly solution, apart from any difficulties that arise (such as rights on directories and files). I think it's best to create a separate output (one project, multiple webhelp outputs) each specified for the client.
To do this, I can come up with three usefull features:
1. CBT's: look into conditional build tags. With these, you can keep topics/text/etc out of certain outputs.
2. Variables. In RH8, you can create multiple sets of those (same variable, different value) and use the separate sets for separate outputs.
3. Multiple style sheets. In RH8, you can select which style sheet you want to use for your topics when you create the webhelp. You can create a separate style sheet for every different brand and use those style sheets when you output your files.
Hope this helps,
Willam
This e-mail is personal. For our full disclaimer, please visit www.centric.eu/disclaimer.

Windows File Crawling - change of folder names in KD?

I setup a Windows File crawler and have it set to mirror the folder structure of the imported path.
However, I would like to slightly change some of the folder names in the KD and leave them the same on the actual share drive.
In my attempts to do this the crawler keeps reverting the filenames back to the way they are on the share drive.
Is there any setting that I can change that might allow me to do this?
I assume its a lost cause, but figured I'd check anyway.
Thanks for any help!

You're correct. It's a lost cause.

Changing a member name in Essbase

In my ASO cube - I need to change both a level 0 and parent member name in EAS. Is it as easy as edit member properties and typing in the new name? Does the existing data follow? Also, does going from lower case to upper case create a similar change in the outline?
Thanks,
Paul

Hi Paul
In my ASO cube - I need to change both a level 0 and parent member name in EAS. Is it as easy as edit member properties and typing in the new name? Does the existing data follow? Also, does going from lower case to upper case create a similar change in the outline?you can also use rule file to change the alias name if you are trying to change the alias name in bulk, but if you have to do for few members then goto edit member properties and change the alias it will be an easy process,
change of alias name doesnot harm your datayes going from Lower Case to Upper Case create similar change to outline
Thanks,
Avneet Singh

ORA-12545 error after changing the host name as IP address in Tnsnames.ora

HI,
I tried to connect PHP and oracle in Red Hat linux. I got error ORA-12545 after changing the host name as IPAddress in Tnsnames.ora file. In sqlnet.ora file also i have entry for tnsnames in Directory_Path. I struggled so much but i couldnt solve that. Please give me ur valuable suggestions....

12545, 00000, "Connect failed because target host or object does not exist"
// *Cause: The address specified is not valid, or the program being
// connected to does not exist.
// *Action: Ensure the ADDRESS parameters have been entered correctly; the
// most likely incorrect parameter is the node name. Ensure that the
// executable for the server exists (perhaps "oracle" is missing.)
// If the protocol is TCP/IP, edit the TNSNAMES.ORA file to change the
// host name to a numeric IP address and try again.
Seems you specified wrong IP address.

A guest at our home used his ipad and changed the network name. How do I change it back to the apple network

A guest at our house was using his ipad and changed the apple netwrok name to another and put a password on it. How do I eliminate this netwrok and get back to the Apple Network?

Please check out the following AirPort User Tip for details on resetting the password. Once that is done, you can access the base station to change its Wireless Name (or SSID) back to what you prefer. To discourage other "guests" from changing the AirPort settings, you should also change the default base station Administrator password.

"Date Modified" for all files being changed if "Automatically write to XMP" is on

Recently upgraded from LR3 (v3.4.1) from LR2 on OSX 10.6.8 and have always had Catalog Settings > Automatically write changes into XMP turned on.
When browsing existing JPG files in my Library (no Develop changes, no keywording, no Presets, no Import), LR3 is writing to disk — i.e., when I look at files in Finder, almost every viewed file’s “Date Modified” is being set to today’s date and time. (It actually creates a .swp file, then changes it's name back to .jpg)
This is really bad, as it's making it impossible for me to use Finder to figure out when I last worked with a file, it is triggering needless Time Machine and Backblaze backups, and unnecessarily churning my disk.
If I turn off "Automatically write..." this behavior stops. Per David Marx at thelightroomlab.com, I tried turning off this preference, manually doing a "Save Metadata to File" for all files, letting that complete, then turning the preference back on. This does not solve the problem.
Per a suggestion at photoshop.com, I used ExifTool to see what changes LR was writing to a sample file; from the diff below, you can see that LR is adding a bunch of new fields as well as moving other fields around. But my point is that LR3 should never overwrite a file on disk if all I am doing is browsing thru them.
Is anyone else seeing this? Any ideas would be greatly appreciated!
-- David
diff Exif5609_original Exif5609_update
2c2
< FileName: DSC_5609_original.JPG
> FileName: DSC_5609_update.JPG
5,6c5,6
< FileModifyDate: 2009:11:27 21:32:54-08:00
< FilePermissions: rwxr-xr-x
> FileModifyDate: 2011:08:07 22:06:47-07:00
> FilePermissions: rw-r--r--
27a28,29
> ShutterSpeedValue: 1/200
> ApertureValue: 7.1
55d56
< SerialNumber: 3209521
75d75
< Lens: 18-200mm f/3.5-5.6
185,188d184
< UserComment:
< SubSecTime: 00
< SubSecTimeOriginal: 00
< SubSecTimeDigitized: 00
211a208,299
> XMPToolkit: Adobe XMP Core 5.2-c004 1.136881, 2010/06/10-18:11:35
> CreatorTool: Ver.1.00
> MetadataDate: 2011:08:07 22:06:47-07:00
> SerialNumber: 3209521
> LensInfo: 18-200mm f/3.5-5.6
> Lens: 18.0-200.0 mm f/3.5-5.6
> ImageNumber: 26634
> RawFileName: DSC_5609.JPG
> SavedSettingsName: Import
> SavedSettingsType: Snapshot
> SavedSettingsParametersVersion: 6.4.1
> SavedSettingsParametersProcessVersion: 5.0
> SavedSettingsParametersWhiteBalance: As Shot
> SavedSettingsParametersIncrementalTemperature: 0
> SavedSettingsParametersIncrementalTint: 0
> SavedSettingsParametersExposure: 0.00
> SavedSettingsParametersShadows: 0
> SavedSettingsParametersBrightness: 0
> SavedSettingsParametersContrast: 0
> SavedSettingsParametersSaturation: 0
> SavedSettingsParametersSharpness: 0
> SavedSettingsParametersLuminanceSmoothing: 0
> SavedSettingsParametersColorNoiseReduction: 0
> SavedSettingsParametersChromaticAberrationR: 0
> SavedSettingsParametersChromaticAberrationB: 0
> SavedSettingsParametersVignetteAmount: 0
> SavedSettingsParametersShadowTint: 0
> SavedSettingsParametersRedHue: 0
> SavedSettingsParametersRedSaturation: 0
> SavedSettingsParametersGreenHue: 0
> SavedSettingsParametersGreenSaturation: 0
> SavedSettingsParametersBlueHue: 0
> SavedSettingsParametersBlueSaturation: 0
> SavedSettingsParametersFillLight: 0
> SavedSettingsParametersVibrance: 0
> SavedSettingsParametersHighlightRecovery: 0
> SavedSettingsParametersClarity: 0
> SavedSettingsParametersDefringe: 0
> SavedSettingsParametersHueAdjustmentRed: 0
> SavedSettingsParametersHueAdjustmentOrange: 0
> SavedSettingsParametersHueAdjustmentYellow: 0
> SavedSettingsParametersHueAdjustmentGreen: 0
> SavedSettingsParametersHueAdjustmentAqua: 0
> SavedSettingsParametersHueAdjustmentBlue: 0
> SavedSettingsParametersHueAdjustmentPurple: 0
> SavedSettingsParametersHueAdjustmentMagenta: 0
> SavedSettingsParametersSaturationAdjustmentRed: 0
> SavedSettingsParametersSaturationAdjustmentOrange: 0
> SavedSettingsParametersSaturationAdjustmentYellow: 0
> SavedSettingsParametersSaturationAdjustmentGreen: 0
> SavedSettingsParametersSaturationAdjustmentAqua: 0
> SavedSettingsParametersSaturationAdjustmentBlue: 0
> SavedSettingsParametersSaturationAdjustmentPurple: 0
> SavedSettingsParametersSaturationAdjustmentMagenta: 0
> SavedSettingsParametersLuminanceAdjustmentRed: 0
> SavedSettingsParametersLuminanceAdjustmentOrange: 0
> SavedSettingsParametersLuminanceAdjustmentYellow: 0
> SavedSettingsParametersLuminanceAdjustmentGreen: 0
> SavedSettingsParametersLuminanceAdjustmentAqua: 0
> SavedSettingsParametersLuminanceAdjustmentBlue: 0
> SavedSettingsParametersLuminanceAdjustmentPurple: 0
> SavedSettingsParametersLuminanceAdjustmentMagenta: 0
> SavedSettingsParametersSplitToningShadowHue: 0
> SavedSettingsParametersSplitToningShadowSaturation: 0
> SavedSettingsParametersSplitToningHighlightHue: 0
> SavedSettingsParametersSplitToningHighlightSaturation: 0
> SavedSettingsParametersSplitToningBalance: 0
> SavedSettingsParametersParametricShadows: 0
> SavedSettingsParametersParametricDarks: 0
> SavedSettingsParametersParametricLights: 0
> SavedSettingsParametersParametricHighlights: 0
> SavedSettingsParametersParametricShadowSplit: 25
> SavedSettingsParametersParametricMidtoneSplit: 50
> SavedSettingsParametersParametricHighlightSplit: 75
> SavedSettingsParametersSharpenRadius: +1.0
> SavedSettingsParametersSharpenDetail: 25
> SavedSettingsParametersSharpenEdgeMasking: 0
> SavedSettingsParametersPostCropVignetteAmount: 0
> SavedSettingsParametersGrainAmount: 0
> SavedSettingsParametersLensProfileEnable: 0
> SavedSettingsParametersLensManualDistortionAmount: 0
> SavedSettingsParametersPerspectiveVertical: 0
> SavedSettingsParametersPerspectiveHorizontal: 0
> SavedSettingsParametersPerspectiveRotate: 0.0
> SavedSettingsParametersPerspectiveScale: 100
> SavedSettingsParametersConvertToGrayscale: False
> SavedSettingsParametersToneCurveName: Linear
> SavedSettingsParametersCameraProfile: Embedded
> SavedSettingsParametersCameraProfileDigest: D6AF5AEA62557FCE88BC099788BBD3CC
> SavedSettingsParametersLensProfileSetup: LensDefaults
> SavedSettingsParametersToneCurve: 0, 0, 255, 255
> IPTCDigest: d41d8cd98f00b204e9800998ecf8427e
228,230d315
< SubSecCreateDate: 2009:11:27 21:32:54.00
< SubSecDateTimeOriginal: 2009:11:27 21:32:54.00
< SubSecModifyDate: 2009:11:27 21:32:54.00
http://feedback.photoshop.com/photoshop_family/topics/lr3_date_modified_for_all_files_bein g_updated_when_browsing_photos_if_catalog_settings_automatically_write_changes_into_xmp_is /replies/6313647

clvrmnky wrote:
davidpope007 wrote:
Then when LR3 loaded my old LR2 images into memory, it "dirtied" the in-memory copy of the file by adding in these new LR3 XMP fields. Then, because I had "Automatically write XMP" on, it said "I better write these changes to disk".
Yuck. As a former software engineer, this is very bad software engineering.
It should wait until the user dirties the file (via Develop, keywords, etc.) before presuming to add a bunch of metadata fields that are unique to the new version of LR3.
Well, I'm a current software developer, and this is, really, a perfectly reasonable thing to do. It is a reasonable trade-off for a convenient feature required by a small subset of users.
Yes, in most cases the in-memory copy should "never" be dirtied unless the user makes a gesture of some sort, but like I said earlier, this option (once set by the user) sets up the situation where this gesture becomes implicit. This is a clear trade-off for the sake of convenience. And if the XMP is out of date and needs to be updated en masse, so be it.
The fact is, there is no easy way around this. Do we save up /every/ dirty buffer somehow until you make a gesture that /might/ require the XMP to be up-to-date before acting on that gesture? Now we have to worry about unflushed buffers if something goes wrong and the app exits. Do we save the buffers to the DB? Now we have to block some calls to make another blocking call to flush some or all of those to DB, and then write some or all of it out to one or more files. In what order? What if there is a gesture to have X files with up-to-date XMP and some or all of those are in unflushed buffers, unflushed DB writes or we have to wait for the DB.
As you can see, this is a transactionality nightmare, and the easiest and safest thing to get what the user wants (i.e., up-to-date XMP for the purpose of talking to a third-party XMP aware app) is to simply update the sidecar or XMP block in an atomic manner using the correct file IO. The file will have to change at some point, so it may as well be now.
[Thanks to both of you for your detailed replies. I am aware of the need for tradeoffs so when you say the approach taken is quite reasonable, I do believe you. I also apologize in advance for the length of the following and am extremely aware of the time it must have taken you to compose the above replies, but I'm going to add a bit more, if only for my own piece of mind and in hopes of coming up with a solution for my workflow.]
From my naive point of view, I was expecting the answer to be simply "don't raise the XMPDirtyFlag upon reading in a file". Obviously if your architecture requires you to "upgrade to latest XMP format" upon read, and another part of the system auto-detects "out of date XMP", then it's going to write those changes to disk.
But it didn't need to be designed that way. LR obviously has mechanisms to know when a user has made a change to XMP so it is able to write XMP changes to disk only when necessary.
The promise (to me) of "Automatically Write XMP changes to disk" was to auto-save my changes, and not those made for any internal (i.e., XMP versioning related) changes.
Perhaps the premise is that it is LR3's job to update an individual file's XMP to the latest version so that other XMP-aware apps can make use of it? I would argue that those third-party XMP-aware apps already have to know how to deal with all prior versions of XMP, so LR3 should just leave well enough alone.
You asked if my problem with your approach was that it was "inelegant"; not at all, it is based on my own perception of what I need from my workflow, so let me describe that so maybe we can find a better way:
* Part of the appeal of LR to me is that it preserves my original file as it came off the memory card, allowing me to move to a different workflow/toolset in 2025 if I choose to do so
* However, with all of changes contained in a single database file, I'm concerned about rare (but possible) corruption, so to mitigate this risk, I let LR backup my database weekly and it's also backed up continuously in the cloud via Backblaze
* Even with backups of the database, there is still a chance that I could lose changes made to individual files (e.g., LR corrupts the DB and I have to go back to last week's DB)
* Thus the appeal of the "auto-write to XMP" flag -- that way critical changes (develop, crop, keywords) are saved on a per-file basis; I liked the "automatic" part of this (as opposed to a manual save) because then I don't have to teach others in my family how to manually save XMP changes
* A nice side-effect of this setting is now when I use Finder to find a file and double-click on it to edit it in Photoshop, all my develop changes are right there; (in other words, I like the flexibility of not having to fire up LR in order to just invoke PS from within it); also when I use Bridge I see all the keywords there
* So with LR2, I had gotten used to what I thought was the best of all worlds -- autosave of changes at the file level via XMP + raw negatives untouched (i.e., Date Modified == the date I took the picture); this allows me to use operating-system-level tools -- Finder -- to locate/search for files
* Now I upgrade to LR3 and I'm finally now understanding that a concept "XMP versioning" is going to result in changes to many, but not all my files. (That's something else that's annoying about this issue -- I open up the Grid and browse a folder of files, and only seemingly random ones I've cursored over seem to get written to disk -- if it's so urgent that LR3 update the XMP, then it should do it for all the files in the catalog or at least in that directory)
Here's a screenshot from Finder of what I see everytime I look at this folder:
* So now I have to assume that each new version of XMP and/or LR is going to touch my files on disk. Sigh.
* What I don't like about this is that it is ruining the promise of "untouched raw negative". Yes, the image data is untouched -- which I agree is most of the benefit; but the file has been touched.
* Perhaps you might empathize a bit more if you imagined that someone went thru all your source code or Word files and randomly changed the date to "today" because you upgraded compilers or moved to Word 2011.
I agree all of this would be solved by having an XMP sidecar file for JPGs, but you indicate that's not going to happen.
You've also alluded to the solution of "resetting the Date Modifed" to it's original value -- which I believe is what Finder does when you move or copy a file -- but that that is fraught with issues as well. I believe you when you say there are issues, but again the naive part of me wonders why that soultion would be so bad...
I just thought of another potential solution -- turning on Date Created in Finder -- but it turns out that's changed, too.
I am really at a loss as to what to do and would welcome your suggestions.
Thanks again and kind regards,
-- David

Remote start the batch file

Hi,
Most of the times i have to kick off a batch file to change the accounts under which SQL agent runs. For this i need to RDP the server itself and run the batch file from the CMD.
I understand that, i can create a schedule.bat file to earlier time and just kick off that schedule bat file manually from the local system through CMD to run the intended batch file on the destination server. So, i wont need to RDP the server itself.
Do i make sense? Can you help me on it?
Thanks

Hello,
Your question is really not "SQL Server XML" related, the topic of this forum.
I don't understand why you have to change frequently the SQL Server Agent Service account? You could use Proxy account for the different Jobs instead.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Batch file results going different directorys

I am calling a batch file to run from the execute exe action with TestStand. The results from the call go to the calling directory or sometimes to the TestStand 3.5 directory. When I run directly from windows the results always go the calling directory. In the TestStand search paths I have removed the TestStand 3.5 directorys and have put the calling directory on the first search line.
Does anyone have any idea why this is happening or what I can do to direct the output file?
Thanks

NiNewbee,
It seems that you have an exe or batch that generates an output file.
When you run the batch file by itself the "working directory" is the directory where the batch file is located, that is why the output file is generated in the same directory.
When you run the batch from another process the working directory is not neccessary the directory where the batch file is located. In this case if you run it from TestStand the working directory would be the TestStand directory.
If you want to generate your output file in the same directory all the time, you have two possible solutions:
1. Pass the target path as an argument to your batch file.
2. Change your working directory (CHDIR) before executing your batch file and change it back when you are done generating the output file.
Hope it helps.
Antonio Lie.

Batch file rename. I have multiple files I want to rename, that have a date in their name in the mm/dd/yy format. The slashes seem to freak out the batch rename function. Any workarounds that would help me avoid manually changing each name?

OS X Yosemite 10.10.2, Macbook Air,
Finder batch file rename function. I have multiple files I want to rename, that have a date in their name in the mm/dd/yy format. The slashes seem to freak out the batch rename function and it won't work. I took out the slashes and worked fine. Any workarounds that would help me avoid manually changing each name? I should point out that I want to leave most of the name intact just change the first word in each name. Also the files I'm working with are in PDF format.

That's a comment in the file. It has no effect at all.

Can a batch file be written to check status of Wifi adapter? Then as outcome change it to the opposite current setting?

Hi all,
Is it possible to have a batch file check the status (Enabled/Disabled) of a wireless adapter and as an outcome have it change the adapters setting to the opposite of it's current setting?
i.e. If set as ENABLED, it will disable it as an outcome.
If set as DISABLED, it will enable it as an outcome.
Thanks as this would be extremely useful to overcome a recent problem with Windows 7 not recognising my dads laptop FN key (aeroplane mode).

Hi all,
I've managed to program 2 batch files (one enables and the other disables):
ENABLE WIFI =
@echo off
echo Please wait ... enabling wireless adapter ...
netsh interface set interface "Wireless Network Connection" ENABLE
echo Your wireless network adapter should now be enabled.
timeout/t 10
DISABLE WIFI =
@echo off
echo Please wait ... disabling wireless adapter ...
netsh interface set interface "Wireless Network Connection" DISABLE
echo Your wireless network adapter should now be disabled.
timeout/t 10
These both work perfectly on my Windows 7 laptop. 8)
HOWEVER ... I'd like to code a single batch file which first checks the connect status of the wireless adapter and then through a IF statement sets the opposite outcome to the current status.
I'm not entirely sure how to code this though. :oops:
I know ... netsh interface show interface name="Wireless Network Connection" ... provides the connection status with "Connect State".
What is the syntax I should use to lookup this connect state value?

How can I change the file name of an mp3 file to it's ID3 name?

I prefer to alter the ID3 names of my music files to include: ARTIST - Track number - Tune Name. I do this in iTunes, by individually selecting each file, and Apple+I, then change the INFO/NAME tag.
But the same file has a file name and an ID3 name then.
Is there any script or APP that will allow me to BATCH convert all music file names to the ID3 name?

> Do you have iTunes prefs > Advanced - Copy files to iTunes
> media folder when adding to library checked?
> (With above checked, when you add to iTunes, it makes a copy
> of teh file in the iTunes folder and iTunes does not do anything
>further with the original)
Yes, how do you think they get there if I double click them in finder and list themselves and start playing in iTunes?
> You are looking at the file in iTunes not the original file
> (which is not in iTunes) correct?
I have talked about both if you will read the thread.
> In iTunes, right click Show in Finder
Read the thread carefully, you are missing something.
> Uncheck Keep iTunes media folder organized,
> then click OK. Then go back and recheck it.
Has no effect whatsoever.

Batch change does not change meta data name when exporting or copy

I use batch change to change the name of an event when photos from more than one source (camera) are imported. When I copy or export the photos the name reverts to the original meta data file. I do this to override duplicate names. For instance photos from two cameras taking pictures of the same event can have identical names such as IMG_0100. Iphoto does not show all the metadata on info but does show the change in the name when viewing info in iphoto.
Is there some way to permanently change the name on photos using a group or batch method?

No you're not changing any filenames at all.
There is no way to change a filename in iPhoto at all. What you with Batch Change is add a Title to the photo. A Title is an entry in the metadata.
You can set the name of an exported file to be the same as the title, when you export... if you choose that option.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

Just want to confirm that I am also having this issue, The connection is fine, and it is in fact charging (@ 100%)
Everything Rick has said is like an echo to what is happening to me.
I have tried re-installing iTunes, and restarting the Bonjour service, sadly there is no change.
earlier before i updated iTunes it recognised my iPod but said that I had to update iTunes in order for it to work.
So i updated iTunes but now it's not even showing the device anywhere.
In case this helps:
OS: Windows 8.1
iTunes version: 11.3.1.8
Device: 5th generation iPod touch 16GB with ios 7

Batch file to change routers Wireless name

Similar Messages

Maybe you are looking for