Batch: From Bridge; cannot change destination folder
I'm suddenly unable to change the destination folders for batches. When I try to change the folder, I only see the current folder I am in and unable to change to another one.
CS4
Windows 7
Try the Bridge forum:
http://forums.adobe.com/community/bridge?view=discussions
Similar Messages
-
Cannot change destination bin during confirmation
Dear SAP experts,
We are in SAP ECC 5.0. We read that we can change the destination bin during confirmation of TO. We have done the pre-requisite:
1. In relevant storage type (001) we input '1' for dst bin ch during confrm field
2. Untick physical inventory during placement to bin
Then we do GR to PO, which generate TR. We create TR into TO and specifying bin INTERIM in storage type 001. During confirmation in tcode LT12, I cannot change the destination bin. What else do I miss in here?
Best regards,
JohnHello John,
Even though config mentions change of destination bin, there are quite a few limitations.
Have a look at below documentation from SAP
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83e5a4afa11d182b90000e829fbfe/frameset.htm
Snapshot of some imp content.
No destination bin can be entered during confirmation for
dynamic coordinates
transfer orders with return subitems
Lean WM (if the destination bin is defined in the movement type)
posting change TOs
inventory based on putaway
additions to existing stock in storage units
stock removal from or putaway into bulk storage
two-step confirmation
transaction Confirm single item
the case where you are using a putaway strategy
all other items in a TO with storage units, if you have already confirmed the first item for the storage unit. The system changes the destination storage bin for all dependent items during confirmation of the first item.
stock removals from a bulk storage managed with storage units
Check if your putaway falls in any of the criteria.
Cheers,
Nag -
Initiating Photoshop CS4 batch from Bridge sometimes ignores RAW xmp settings
This happens a lot using both my work PC (XP 64) and home PC (Vista 64), but not always...and I have not been able to track down exactly how to fix this.
What happens is I try to launch a batch process for RAW photos taken with my Canon EOS 5D Mark II (develop settings already set in xmp files using Adobe Camera RAW from Bridge). The actions in the batch process execute correctly, but the resulting files appear to have completely ignored my ACR develop settings. This happens if I launch the batch process in either version of Photoshop CS4 (64 or 32 bit).
My only solution is to carefully watch Photoshop as files get loaded by the batch process and abort the batch if one opens without the correct develop settings (not always easy to discern...sometimes I have to wait for the process to save the file so I can toggle back and forth between the images in Bridge). I then restart Bridge and/or Photoshop until I can start a batch process that opens the image correctly. Once a single file has opened with the correct settings, subsequent files open as expected...so the rest of the batch process will complete.
Has anyone else seen this phenomenon? This is really annoying as it never happened to me in CS or CS2.This happens a lot using both my work PC (XP 64) and home PC (Vista 64), but not always...and I have not been able to track down exactly how to fix this.
What happens is I try to launch a batch process for RAW photos taken with my Canon EOS 5D Mark II (develop settings already set in xmp files using Adobe Camera RAW from Bridge). The actions in the batch process execute correctly, but the resulting files appear to have completely ignored my ACR develop settings. This happens if I launch the batch process in either version of Photoshop CS4 (64 or 32 bit).
My only solution is to carefully watch Photoshop as files get loaded by the batch process and abort the batch if one opens without the correct develop settings (not always easy to discern...sometimes I have to wait for the process to save the file so I can toggle back and forth between the images in Bridge). I then restart Bridge and/or Photoshop until I can start a batch process that opens the image correctly. Once a single file has opened with the correct settings, subsequent files open as expected...so the rest of the batch process will complete.
Has anyone else seen this phenomenon? This is really annoying as it never happened to me in CS or CS2. -
I cannot download any attachments. I get the pop up message to save it, I save it but it saves all attachments as a .part file which cannot be opened (or it just opens in Word even when it is a music/sound file.
Also, I tried to change the folder I download to and it will not let me. I click "choose" in the downloads prefs area but it does not let me change it. the button is unresponsive.Lion hides the Library directory, but there are instructions on this page that describe how to make it visible.
* http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
In Snow Leopard, the Firefox profile is in User/<username>/Library/Application Support/Firefox/Profiles/<randomname>.default. I am assuming that the path has not changed in Lion.
Finding something in the Library used to be easy before Apple decided that Spotlight should no longer access it, so I have taken to using Easyfind instead. If the path to the profile has changed in Lion, you could still find it by searching for cookies.sqlite, but you cannot use Spotlight for that. Easyfind is much more versatile anyway. -
Loading Batch from Bridge-Tools-Photoshop-Batch no screen appears
Can't get Batch screen to load in cs6 from Bridge-Tools-Photoshop-Batch
Hello! are you on a PC, a MAC? can we have more info about your machine.
Is anything non-standard on your setup, for instance: Are you using restricted profiles on a PC?
The window does not show, there is no error message? is Ps running? does it work from Photoshop? what kind of files are selected?
If you give all the relevant info directly you'll get your answers faster. -
checking Plugins, I always get Flash player outdated! I discovered that Better Privacy Changed downloading folder to removable. How can I fix this problem? even setting FF several times to its factory setting is not helpful.
That's the latest version, and you can see above under Question Details - More System Details that it's available to websites.
Since I don't see any obvious issues, I suggest you perform a clean install of Flash Player as described below. It's admittedly tedious, but it's an effective cure-all for most Flash Player problems.
# From the following page, save the uninstaller somewhere handy, like the desktop.
#* [http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html#main_Download_the_Adobe_Flash_Player_uninstaller Uninstall Flash Player for Windows | Adobe Support]
# From the following page, save the installer for other browsers. If you also use Flash Player in Internet Explorer, also save the ActiveX version.
#* [http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#main-pars_text_4 Direct downloads of Flash Player for Windows | Adobe Support]
# Exit all applications.
# Run the uninstaller.
# In Windows Explorer, try to open the following folders. If they still exist, delete them manually.
#* <pre>C:\Windows\system32\Macromed\Flash\</pre>
#* <pre>C:\Windows\SysWOW64\Macromed\Flash\</pre>
#* <pre>%AppData%\Adobe\Flash Player\</pre>
#* <pre>%AppData%\Macromedia\Flash Player\</pre>
# Restart your computer.
# Run the installer for other browsers.
# Run the ActiveX installer if you downloaded it.
If you continue having issues afterwards, please attach a screenshot of the problem.
* [[How do I create a screenshot of my problem?]] -
Change destination folder.
There is any way to change the destination folder of my books in "adobe digital editions" I tried everithing and it keeps saving the archives in the digital book memory instead of doing it on the sd memory card.
ThanksNo, the download folder is hard coded to be the (My) Digital Editions folder, which must be in the OS user's (My) Documents folder. ( It's My Documents on Windows, and Documents on Mac).
-
Active Content: cannot change Scripts folder name?
Using DW 8.0.2.
After I accept the Active Content workaround to be applied to
my pages, I'd like to change Scripts folder name to "scripts" or
even move the scripts to my "jscript" folder, which already exists.
When I do this DW correctly asks to update the page links, but even
with the correct links the scripts does not run anymore.
It seems to be caused by some JS code included in the
scripts, which points to "Scripts" folder in site root. But I don't
know enough JS to identify and modify this. Any help will be very
welcome.Shouldn't happen. I have moved the AC .....js file many times
to different
folders and if the path is correct, everything works
properly. Can you
please post a link.
You cannot lose until you give up !!!
"Freiberger" <[email protected]> wrote in
message
news:eou61k$enn$[email protected]..
> Using DW 8.0.2.
>
> After I accept the Active Content workaround to be
applied to my pages,
> I'd
> like to change Scripts folder name to "scripts" or even
move the scripts
> to my
> "jscript" folder, which already exists. When I do this
DW correctly asks
> to
> update the page links, but even with the correct links
the scripts does
> not run
> anymore.
>
> It seems to be caused by some JS code included in the
scripts, which
> points to
> "Scripts" folder in site root. But I don't know enough
JS to identify and
> modify this. Any help will be very welcome.
> -
How do you export you DNG pictures as a batch from Bridge CS6 for web?
I am trying to find the fastest way how to do it from Bridge. Now I make some basic corrections with all pictures in Camera Raw and then save them as... with same lower resolution for the web or preview purposes.
How do you make it? ThxWith the Image Processor.
-
Cannot change download folder on pc
I cannot change the download and upload folders thru "icloud on my pc"
Let me check that.
-
Cannot change public folder owner in adsiedit to the server_name$ where PF are stored
Hi,
I have migrated PF from Exch 2003 to the Exch 2010 SP2 RU6.
Some of PFs still have the old Exchange 2003 servername as the owner in Security-Advanced-Owner of ADSIEdit.
However when I try to change it to the Exch2010_server_name$ (the one where Public Folders are mounted - I cannot (without any reason). But I can change it to one of the CAS servers, strange isn't it?
I have already tried this using domain admin account and Exchange admin account (both are assigned to Public Folder Management).
Can you help me to set the correct server name (as it is set for new public folders), please?
BR Michal ZiembaHi Michal,
Based on my knowledge, we don't need to change the owner of public folder manually when we migrate public folder.
The issue may be related to AD replication. You can run Dcdiag on your domain controllers and make sure you're not having replication problems.
Here is a thread for your reference.
Public Folder Issues - Exchange 2010 after migration from 2003
http://social.technet.microsoft.com/Forums/exchange/en-US/fe0909c1-ee2e-448b-ad89-e8f4ff92b4a9/public-folder-issues-exchange-2010-after-migration-from-2003-insuffaccessrights?forum=exchange2010
Hope it helps.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support -
I used icns2icon and yet, I cannot change a folder's icon!
I have a .icns file, on which I used the icns2icon to have it correctly display correctly in finder (get it at http://www.icons.cx/goodies/), but still I cannot "select" the icon in the view information dialog and copy it to the corresponding folder icon I want, as per instructions I found on the web.
What is wrong?I just tried my copy of icns2icons and everything seems to be working correctly. I converted an icns file so that it displayed the icon, did GetInfo, clicked the wee little icon at the top of the GetInfo window to select it (it has a teeny tiny blue halo when selected, which can be VERY hard to see), selected Copy. Created a new folder, did GetInfo on it and selected its wee icon, then selected Paste, and it immediately changed to the new icon. So, it should work. Are you sure you are getting the icon selected? At what point are getting the failure? Are you saying clicking on the wee little icon in GetInfo does not select it, so that Copy is greyed out? If so, try clicking again. Like I said, it can be hard to see whether you actually got it selected or not.
Francine
Francine
Schwieder -
Run report from forms - Cannot change file name in report node
I am running a report (9i) from forms (9i) and I changed the name of the report in the filename field in the report node (in object navigator).
I noticed that I get the error FRM-41214 on the RUN_REPORT_OBJECT line when I run the form, if I've changed the filename from what it originally was. e.g. It was originally rep44.rdf and I changed it to rep55.rdf, but I get this error unless I keep the rep44.rdf filename. Why? Is there somewhere else I should change this filename?To view the reports queue open this URL:
http://<server>:<port>/reports/rwservlet/showjobs?server=<repserver>
Also, try running the report stand alone, not from Forms.
http://<server>:<port>/reports/rwservlet?server=<repserver>&report=rep55.rdf&userid=<un>/<pw>@<db>&destype=cache&desformat=PDF -
Cannot change destination for download
With PowerBook G4, MacOSX10.5.8, Treo 755p, HotSync 3.2.1
I am trying to download PocketTunes' EyeTunes from my Mac, however, I cannot get EyeTunes to move from the SecureSD side to the Handheld side. Nor will EyeTunes download from the SecureSD side. The error msg produced is
"the file eyetunes cannot be installed to the handheld". Have also tried removing the SecureSD card, but no go.
I had to replace my old Treo 755p with another Treo 755p because the speaker failed and now I am having trouble getting PocketTunes up to the version on my old Treo, because I cannot get PocketTunes downloaded.
Appreciate any help,
Thanks, -DianeWith PowerBook G4, MacOSX10.5.8, Treo 755p, HotSync 3.2.1
I am trying to download PocketTunes' EyeTunes from my Mac, however, I cannot get EyeTunes to move from the SecureSD side to the Handheld side. Nor will EyeTunes download from the SecureSD side. The error msg produced is
"the file eyetunes cannot be installed to the handheld". Have also tried removing the SecureSD card, but no go.
I had to replace my old Treo 755p with another Treo 755p because the speaker failed and now I am having trouble getting PocketTunes up to the version on my old Treo, because I cannot get PocketTunes downloaded.
Appreciate any help,
Thanks, -Diane -
Can't change Destination folder
When I first downloaded itunes i installed it on driver E. I no longer have driver E It's now driver F. when I try to download the itunes update i get the message E not available choose another destination. when I go to choose There are no choices the option on the installer fails to work.
With that one I'd try the following user tip:
http://discussions.apple.com/thread.jspa?threadID=2450004
Maybe you are looking for
-
Cannot download camera raw version 6.6 Windows 7 get error code U44M2P7
Cannot download camera raw version 6.6 Windows 7. get error code U44M2P7
-
How do i customize a pricing condition?
currently i have a condition for calculating surcharge of 5%, as of now this condition is taking the amount from PB00 and calculate the 5% amount. however, i have freight costs in the line item as well, how do i configure the surcharge condition so t
-
Pc bogs down when running longer, more voluminous queries
Hi we run 2012 enterprise. I'm noticing that when running longer and higher column count queries locally, other parts of my computer (os w7 professional, 64 bit, 8gb) start getting sluggish. I started looking for wasted disk space and started cleani
-
My project won't open... It says "locating media" and then gets stuck. What do I do?
-
Debug Media Encoder after a crash. Can't render jpeg sequence.
I have several time lapse vidoes I am working on. The files provided are jpeg sequences. I've been trying to make a mov file out of jpeg (70k-ish) sequences. It worked with one batch but not with the others. I have no idea why. Media Encoder seems to