Batch Input and Select Option
Hello,
Please, i have one issue.
I want to do one Batch Input for one standard transaction. In this transaction, exist one select-option and i fill more values.
I generate the SDHB but i have problema with the select-option. How i can simulate enter value in the Select option by code?
Thank you.
Hi SALHI AMAL,
We can do this. But its a lengthy process.
You have to record by giving multiple selection values and do some changes in that code.
The number of rows in that 'Multiple Selection' dialog is 8 and it is constant, i.e. it won't vary with monitor or screen size.
In my testing,
perform bdc_dynpro using 'SAPLALDB' '3000'.
perform bdc_field using 'BDC_OKCODE'
'=ACPT'.
This is the code to just to fill values in 'SELECT SINGLE VALUES' tab.
If i want to fill more than 8 values, the following code will do that,
perform bdc_dynpro using 'SAPLALDB' '3000'.
perform bdc_field using 'BDC_OKCODE'
'=P+'.
In this, you have to determine, how many times, we have to press 'PAGE DOWN'.
This all regards one tab in that dialog. Still there are 3 dialogs.
Regards,
R.Nagarajan.
Similar Messages
-
Parameters and Select Option in ABAP OO
Hi all,
it's possible to build an application starts with a method of a class thats declares parameters and select-option or I have to do it custom creating a dynpro and some input field as parameters?
thanks
enzoJust to add detail: the function module RS_REFRESH_FROM_SELECTOPTIONS returns a table of TYPE RSPARAMS_TT.
The structure of this table is:
SELNAME
RSSCR_NAME
KIND
RSSCR_KIND
SIGN
TVARV_SIGN
OPTION
TVARV_OPTI
LOW
TVARV_VAL
HIGH
TVARV_VAL
the first field is the name of the selection parameter, the others have the same structure obtained declaring a range with:
TYPES|DATA <rangetab> TYPE RANGE OF <type>.
see the help topic http://help.sap.com/saphelp_470/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/content.htm -
Difference between Multiple single values and Selection option variables
Hi !
Can any one tell me the difference between variable types:
Multiple single values and Selection option?
I used each one of them for selecting values for a characteristic but could not notice a difference in choosing values.
Is there some difference in functionality or can they be used interchageably?
Regards,
Sri HarshaHarsha,
When you go for slection option, in the variable input screen you will be having a button in the last where you can give your slections. There you can maintain either multiple single values and Multiple intervals or else not equal to also..
Just check out there... you will be having tabs for each..
Assign Points if it helps
Gattu -
Radio button and select option in one line
Hi,
I have an requirement in which i need to display the radio button and select option in one line in an report program.
How can i do it?
Regards,
Arun.Hi,
Try this code.
TABLES: bkpf.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: p_r1 RADIOBUTTON GROUP a.
SELECTION-SCREEN COMMENT 4(20) text-001 FOR FIELD p_r1.
SELECTION-SCREEN COMMENT 30(12) text-002 FOR FIELD p_date.
SELECTION-SCREEN POSITION 39.
SELECT-OPTIONS: p_date FOR bkpf-budat OBLIGATORY.
SELECTION-SCREEN END OF LINE.
PARAMETERS: p_r2 RADIOBUTTON GROUP a.
text-001 = " Radio button"
text-002 = "Posting date" -
Difference between Batch input and Direct Input
Hi please tell me the difference between Batch Input and Direct Input in BDC?
hi aparna,
<b>DIRECT INPUT</b>
TO ENTER THE DATA INTO THE CORRESPONDING DATABASE TABLES DIRECTLY, THE SYSTEM CALLS A NUMBER OF FUNCTION MODULES THAT EXECUTE ANY NECESSARY CHECKS. IN CASE OF ERRORS, THE DIRECT INPUT TECHNIQUE PROVIDES A RESTART MECHANISM. HOWEVER, TO BE ABLE TO ACTIVATE THE RESTART MECHANISM, DIRECT INPUT PROGRAMS MUST BE EXECUTED IN THE BACKGROUND ONLY. DIRECT INPUT CHECKS THE DATA THOROUGHLY AND THEN UPDATES THE DATABASE DIRECTLY.
TO MAINTAIN AND STRAT THESE PROGRAMS, USE PGM RBMVSHOW OR THE TRANSACTION BMVO.
<b>BATCH INPUT</b>
TYPES SESSION METHOD, CALL TRANSACTION, DIRECT INPUT.
TO SAVE DATA IN THE BDCTAB, USE THE FIELDNAME BDC_OKCODE AND FIELD VALUE OF /11.
BDCDATA
THIS IS A STRUCTURE WHICH CONTAINS THE FOLLOWING FIELDS.
PROGRAM NAME OF TH MOD PROG ASSOCIATED WITH THE SCREEN. SET ONLY FOR THE FIRST RECORD OF THE SCREEN.
DYNPRO SCREEN NUMBER. ALSO SET ONLY FOR FIRST RECORD.
DYNBEGIN INDICATES THE FIRST RECORD OF THE SCREEN. SET X FOR FIRST RECORD OTHERWISE .
FNAM FIELD NAME.
FVAL VALUE FOR THE FIELD NAMED IN FNAM.
THE FIRST STEP IN BDC IS TO UPLOAD DATA FROM THE FLAT FILE OR SEQUENTIAL FILE TO THIS BDCTABLE.
SESSION METHOD
WE USE 3 FUNCTION MODULES IN THIS SESSION METHOD.
1) BDC_OPEN_GROUP
USER NAME: USER NAME
GROUP: NAME OF THE SESSION
LOCK DATE: THE DATE ON WHICH YOU WANT TO PROCESS THE SESSION.
KEEP: THIS PARAMETER IS PASSED AS X WHEN YOU WANT TO RETAIN SESSION AFTER PROCESSING IT OR TO DELETE IT AFTER PROCESSING.
THIS CREATES A SESSION
2) BDC_INSERT
TCODE: TRANSACTION NAME
DYNPROTAB: BDC DATA
THIS CREATES A SEESION AND DATA IS TRANSFERRED O SESSION.
3) BDC_CLOSE_GROUP THIS CLOSES THE BDC GROUP.
ONLY ONE SESSION CAN BE CREATED USING BDC_OPEN_GROUP. BUT MULTIPLE TRANSACTIONS CAN BE PROCESSED USING BDC_INSERT.
CALL TRANSACTION
CALL TRANSACTION <TCODE> USING <BDCTAB>
MODE <A/N/E>
UPDATE <S/A>
MESSAGES INTO <MSGTAB>.
A ALL SCREEN MODE. ALL THE SCREEN OF THE TRANSACTION ARE DISPLAYED.
N NO SCREEN MODE. NO SCREEN IS DISPLAYED WHEN YOU EXECUTE THE TRANSACTION.
E ERROR SCREEN. IF THE SCREEN HAS ERROR RECORD, THEN THAT SCREEN WILL BE DISPLAYED.
S - IF YOU CHANGE DATA OF ONE TABLE THEN ALL THE RELATED TABLES GETS UPDATED. AND SY-SUBRC IS RETURNED I.E., SY-SUBRC IS RETURNED FOR ONCE AND ALL.
A - WHEN YOU CHANGE DATA OF ONE TABLE, THE SY-SUBRC IS RETURNED. AND THEN UPDATING OF OTHER AFFECTED TABLES TAKES PLACE. SO IF SYSTEM FAILS TO UPDATE OTHER TABLES, STILL SY-SUBRC RETURNED IS 0 (I.E., WHEN FIRST TABLE GETS UPDATED
WHEN YOU UPDATE DATABASE TABLE, OPERATION IS EITHER SUCCESSFUL OR UNSUCCESSFUL OR OPERATION IS SUCCESSFUL WITH SOME WARNING. THESE MESSAGES ARE STORED IN INTERNAL TABLE, WHICH YOU SPECIFY ALONG WITH MESSAGE STATEMENT. THIS INTERNAL TABLE SHOULD BE DECLARED LIKE BDCMSGCOLL, A STRUCTURE AVAILABLE IN ABAP/4. IT CONTAINS THE FOLLOWING FIELDS: TCODE, DYNAME, DYNUMB, MSGTYP, MSGID.
DIFFERENCE BETWEEN SESSION AND CALL TRANSACTION
SESSION METHOD CALL TRANSACTION
1. DATA IS NOT UPDATED IN DATABASE TABLE UNLESS SESSION IS PROCESSED. IMMEDIATE UPDATION IN DATABASE TABLE.
2. NO SY-SUBRC IS RETURNED. SY-SUBRC IS RETURNED.
3. ERROR LOG IS CREATED FOR ERROR RECORDS. ERRORS NEED TO BE HANDLED EXPLICITLY
4. UPDATION IN DATABASE TABLE IS ALWAYS SYNCHRONOUS
UPDATION IN DATABASE TABLE CAN BE SYNCHRONOUS OR ASYNCHRONOUS.
5. ASYNCHRONOUS PROCESSING SYNCHRONOUS PROCESSING
6. TRANSFERS DATA FOR SINGLE TRANSACTIONS TRANSFERS DATA FOR MULTIPLE TRANSACTIONS
ERROR HANDLING IN CALL TRANSACTION
1) CREATE AN INTERNAL TABLE SIMILAR TO THE STRUCTURE OF YOUR LOCAL FILE.
2) CREATE BDCTAB LIKE BDCDATA.
3) CREATE BDCMSG LIKE BDCMSGCOLL.
4) CREATE AN INTERNAL TABLE SIMILAR TO THE 1ST INTERNAL TABLE.
5) UPLOAD FN UPLOADS DATA FROM THE LOCAL FILE TO THE ITAB.
6) LOOP AT ITAB.
POPULATE BDCTAB TABLE.
CALL TRANSACTION STATEMENT.
PERFORM CHECK.
REFRESH BDCTAB.
ENDLOOP.
7) FORM CHECK.
IF SY_SUBRC <> 0.
CALL FUNCTION FORMAT_MESSAGE.
APPEND ITAB2.
ENDFORM.
TRANSACTION FOR RECORDING SHDB.
MAX TIME ALLOWED FOR ONLINE EXECUTION 300 SECONDS.
<b>
Pls reward if helpful.</b> -
Selection screen framebox's width extension and select option position
Hi,
when i code the following, the select option multiple selection button falls outside the framebox. Is there any way to increase the frame's width or adjust the select option's button? Can I control the select options' distance between the text and input field, the distance between input field skstar10-low and skstar10-high, as well as the position of the word "to" (at the left of skstar10-high)?
SELECTION-SCREEN BEGIN OF BLOCK C10_12 WITH FRAME.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (11) TEXT-042 FOR FIELD skstar10.
SELECT-OPTIONS: skstar10 FOR cosp-kstar.
SELECTION-SCREEN COMMENT 61(11) TEXT-043 FOR FIELD skstar11.
SELECT-OPTIONS: skstar11 FOR cosp-kstar.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK C10_12.Hi,
Try this
SELECTION-SCREEN BEGIN OF BLOCK c10_12 WITH FRAME.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (11) text-042 FOR FIELD skstar10.
SELECT-OPTIONS: skstar10 FOR cosp-kstar.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (11) text-043 FOR FIELD skstar11.
SELECT-OPTIONS: skstar11 FOR cosp-kstar.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK c10_12. -
Maximum allowable input for select-options
Hi All,
Can we enter any number of values in select-options on the selection screen. What is the limit on the number of values that can be given for select options.
For example if the limit for a select-options field is 100000 and if i want to give 999999 values as input on the selection screen, how am I supposed to handle this.
Thanks in advance,
MadhuHi Madhu,
see the sample code below .. i hope it this will help you..
SELECT-OPTIONS: s_order FOR vbak-vbeln . "Default the value range 100000 to 9999999 appears on the screen
INITIALIZATION.
* Loading default values to screen input for Sales Order field
MOVE 'I' TO s_order-sign.
MOVE 'BT' TO s_order-option.
MOVE '1000000' TO s_order-low.
MOVE '9999999' TO s_order-high.
APPEND s_order.
* Screen field Validation
AT SELECTION-SCREEN ON s_order.
if s_order-low NE 100000.
message 'Sales order Low value should be 100000' type 'E'.
endif.
if s_order-High NE 999999.
message 'Sales order High value should be 999999' type 'E'.
endif.
Regards,
Prabhudas -
Hi,
I have one program, that calls VA03 and print Billing document immediately.
Now they want stop batch-input at Issue output screen, and after they fill the options that want and continue the program.
Can you tell me if it is possible?? And if yes,what is the soluction for this?
Thanks ina advance.
All ideas are welcome.I found one solution.
Batch-input code:
t-code = 'VA03'.
REFRESH bdcdata.
PERFORM bdc_dynpro USING 'SAPMV45A' '0102'.
PERFORM bdc_field USING 'BDC_OKCODE' 'DRCK'.
PERFORM bdc_field USING 'VBAK-VBELN' tab-vbeln.
PERFORM bdc_dynpro USING 'SAPLVMSG' '0200'.
PERFORM bdc_field USING 'BDC_OKCODE' '=OPTS'.
CALL TRANSACTION 'VA03' USING bdcdata MODE 'E'
UPDATE 'S'
MESSAGES INTO messtab.
Thank you by all helps.
Ana -
Using roadmap and select-options
I'm new to abap web dynpro, i'm using a roadmap with 4 views. This is working fine but, when I try to use select options in view1 they don't show. When I set view1 as default view the select options are working fine.
this is how my current web dynpro looks like:
Main view -> roadmap with viewcontainerUIElement
view1 -> viewContainerUIElement + table (in the window I embedded the select options in the viewContainerUIElement)
view2
view3
view4
In view1 I'm using wddoinit to initialise the select options.
Thanks in advance!Hi Srinivas,
According to you mail, I will provide some solution please try them. It will definitely works.
---> Create a attribute which holds the lead selection values of the RADIO_GROUP.
---> When you click on the Next View, You will fire the plug. Right. Just before firing the Plug, update the above
attribute with update information.
> Do the same code for Select-options code in the WDDOINIT except the passing the values to the select-options.
> Please pass the attribute information to Select-options with updated information in the method WDDOMODIFYVIEW every time. Without creating a attribute also you can approach the same method. Just for simple access we can create a attribute. Otherwise without that we can do the same.
So Just populate the values into Select-options depending on the value of RADIO_GROUP you will do the same coding WDDOMODIFYVIEW. But initialization of SELECT-OPTIONS can be only done in the method WDDOINIT method only. WDDOINIT method only execute first time once you go through it and go back and move forward then this method won't execute.
I hope this logic will work for you. If not Please send me the Code related to SELECT-OPTIONS and RADIO_GROUP Button information.
I will be in office today up to 4.45 PM (IST). You can contact me in this time otherwise we will discuss on webex tomorrow morning at 9 AM.
Warm Regards,
Vijay -
REPORT_ATTRIBUTE_ERROR_MESSAGE and SELECT-OPTIONS
Hi,
I'm still at a loss on how to use the REPORT_ATTRIBUTE_ERROR_MESSAGE on select-options using WDR_SELECT_OPTIONS.
Do I need to create a Context Node and attributes in the view for the selection options I'm creating? Then, get the attributes of this node and context elements to pass to the REPORT_ATTRIBUTE_ERROR_MESSAGE?
Thanks,
HuntrHi,
I'm still at a loss on how to use the REPORT_ATTRIBUTE_ERROR_MESSAGE on select-options using WDR_SELECT_OPTIONS.
Do I need to create a Context Node and attributes in the view for the selection options I'm creating? Then, get the attributes of this node and context elements to pass to the REPORT_ATTRIBUTE_ERROR_MESSAGE?
Thanks,
Huntr -
Text for block and select option on the selection screen of Logical Databas
Hi,
I have copied a standard program (RFBELJ10) which is making use of LDB (BRF) and created a custom program. Now, the requirement is to add a selection screen option to the custom report and do some validation on the data extracted. I have added the select option and provided a text (lets say "Segment") to it using menu path Goto --> Text Elements --> Selection Texts and activated. But this text is not displayed on the screen when i execute the report. It is showing the string which i used while defining the select option.
Also i need to provide a frame and title to it. but its not displayed.
i have written the following code for that:
SELECTION-SCREEN: BEGIN OF BLOCK seg WITH FRAME TITLE text-h01. " Segment
SELECT-OPTIONS: s_segmnt FOR faglflexa-segment. " Segment
SELECTION-SCREEN: END OF BLOCK seg.
Could you please help me in getting the texts displayed for fram and the select option?
Thanks,
PhaniSolved the problem. I have maintained the text in German. So, when I execute the report in english, it is not displaying the text. I have translated the texts to English and is working fine now.
-
How to develop ALV and select-option element in BSP? Help!
Hi Experts,
I have a requirement where I have a selection screen with 3 select-option elements and a search button. On clicking the search button an ALV table report has to be shown.
The ALV table is used for new row/rows entry, delete row/rows and update row/rows data. This is something like table control in normal ABAP.
Additionaly, I want the download to Excel, sorting, filtering, column swapping options in ALV.
How can I achieve this in BSP?
Is there any existing SElect-option and ALV component in BSP?
Any code sample will be really helpfull.
How much development time will it take?
Please help!
Thanks
GopalI think you will find that most of what you are looking for does NOT exist out of the box for BSP. There is no delivered selection-option or value help. I ended up creating my own over the years (You can find some versions online here in SDN in my weblogs - however a complete implementation of select-options was only delivered along with the Advanced BSP Programming book).
There is no ALV either. However with the htmlb:tableView, you can acomplish quite a bit. You may have to learn about table view iterators to get it all done. Downloading to Excel also isn't delivered. I developed a reusable BSP Extension element for this as well (can be found on SDN in my weblogs or with the Advanced BSP Programming book).
If you plan to recreate all these elements by yourself, your project will take some time. It took a while to build so many complex UI elements.
What release are you running on? In Netweaver04S you have Web Dynpro ABAP. WDA has delivered components for value help, select-options, and ALV. -
Selecting user input from Select option into smart form
Hi,
when i use parameter then i wil show company code in smart-form output
but when i use select option then its throwing error parameter specified here is different
what should i do in this case i want to design a big select option screen for taking user input
REPORT ZMM.
TABLES BSEG.
DATA : V_FORMNAME TYPE TDSFNAME VALUE 'ZPUR_REG',
V_FMNAME TYPE RS38L_FNAM.
*PARAMETERS SO_BUKRS TYPE BUKRS.
SELECT-OPTIONS : SO_BUKRS FOR BSEG-BUKRS.
DATA : Z_CONTROL TYPE SSFCTRLOP, "Smart Forms: Control structure
Z_OPTIONS TYPE SSFCOMPOP. "SAP Smart Forms: Smart Composer (transfer) options.
MOVE 'X' TO : Z_control-no_dialog, "SAP Smart Forms: General Indicator
Z_options-tdnewid, "New Spool Request (Print Parameters)
z_control-PREVIEW. "Print preview
MOVE 'LP01' TO Z_options-tddest. "Spool: Output device
MOVE space TO Z_options-tdimmed. "Print Immediately (Print Parameters).
MOVE 'PRINTER' TO Z_control-device. "Output device
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = V_FORMNAME
IMPORTING
FM_NAME = V_FMNAME.
CALL FUNCTION V_FMNAME
EXPORTING
CONTROL_PARAMETERS = Z_CONTROL
OUTPUT_OPTIONS = Z_OPTIONS
USER_SETTINGS = ''
BUKRS = SO_BUKRS.
pls help me in this regards.
ketan..hi
thnx for your reply
can u pls elaborate in my code
now i changed code BUKRS = SO_BUKRS-low.
either i can give low or high but how to select from range
REPORT ZMM.
TABLES BSEG.
DATA : V_FORMNAME TYPE TDSFNAME VALUE 'ZPUR_REG',
V_FMNAME TYPE RS38L_FNAM.
*PARAMETERS SO_BUKRS TYPE BUKRS.
SELECT-OPTIONS : SO_BUKRS FOR BSEG-BUKRS.
DATA : Z_CONTROL TYPE SSFCTRLOP, "Smart Forms: Control structure
Z_OPTIONS TYPE SSFCOMPOP. "SAP Smart Forms: Smart Composer (transfer) options.
MOVE 'X' TO : Z_control-no_dialog, "SAP Smart Forms: General Indicator
Z_options-tdnewid, "New Spool Request (Print Parameters)
z_control-PREVIEW. "Print preview
MOVE 'LP01' TO Z_options-tddest. "Spool: Output device
MOVE space TO Z_options-tdimmed. "Print Immediately (Print Parameters).
MOVE 'PRINTER' TO Z_control-device. "Output device
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = V_FORMNAME
IMPORTING
FM_NAME = V_FMNAME.
CALL FUNCTION V_FMNAME
EXPORTING
CONTROL_PARAMETERS = Z_CONTROL
OUTPUT_OPTIONS = Z_OPTIONS
USER_SETTINGS = ''
BUKRS = SO_BUKRS-low.
ketan.. -
Selection-Screen Parameter and select option
Hi
I had a very small and silly problem , i have a selection screen in which i had one select-options and another parameter .
when i define both variable as select option i get output but if i define plant as parameter i dont get any output, .the code .
SELECTION-SCREEN : BEGIN OF BLOCK s_screen WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_matnr FOR plaf-matnr.", " OBLIGATORY,
PARAMETERS: s_werks like plaf-pwwrk. " , " OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK s_screen.
in this code when
i enter material number i dont get output .
i enter plant the i get output
SELECT afko~aufnr
afko~gamng
afko~plnbez
afpo~dwerk
afpo~psmng
afpo~matnr
INTO CORRESPONDING FIELDS OF TABLE i_afko
FROM afko INNER JOIN
afpo ON afpoaufnr = afkoaufnr
WHERE afpo~dwerk = s_werks
and afpo~matnr IN s_matnr
AND afpo~elikz = space.
regards
answers will be definately awarded pointsHi
When you use the plant in select-option, your code should be:
WHERE afpo~dwerk IN s_werks
and afpo~matnr IN s_matnr
if it's parameter:
WHERE afpo~dwerk = s_werks
and afpo~matnr IN s_matnr
Are u sayng in the first case you get the data and in the second one you don't?
Max -
Selection Screen - User input to select option only through f4 help,
Hi..
In case of selection screen, I need selection screen such a that user input must be through search help not manual entry is allowed/ possibleTYPES:BEGIN OF ty,
field1 TYPE char01,
END OF ty.
DATA:it TYPE TABLE OF ty,
wa TYPE ty.
data:v_var type c.
select-options:so for v_var.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'SO-LOW' .
screen-input = 0.
MODIFY SCREEN.
ENDIF.
IF screen-name = 'SO-HIGH' .
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so-low.
CLEAR it[].
wa-field1 = 'A'.
APPEND wa TO it.
wa-field1 = 'B'.
APPEND wa TO it.
CLEAR wa.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'FIELD1'
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'SO-LOW'
value_org = 'S'
display = 'F' "F = Force
TABLES
value_tab = it[].
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so-high.
CLEAR it[].
wa-field1 = 'A'.
APPEND wa TO it.
wa-field1 = 'B'.
APPEND wa TO it.
CLEAR wa.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'FIELD1'
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'SO-HIGH'
value_org = 'S'
display = 'F' "F = Force
TABLES
value_tab = it[].
Maybe you are looking for
-
A couple of days ago, I updated my MacBook Pro to OS X Mavericks and unfortunately my epson mutifunctional in the scanner part does not function any more I have visited several times a day the support page for Maveriks inside Epson site and there is
-
my mac book pro is working slower and i am unable to do any wprk in it... its more than 90% space is empty.
-
Some critical errors in Planning, Business Rules and FR
Dear All, I am facing some critical errors in Hyperion Plannign 11.1.1.3. We did the migration of BR rules from one server to another server. Migration went well. When i running any one of the rule, it throws the below errors: If i run any one of the
-
Is there a missing feature in iCloud Tabs?..
Hello. I have installed iOS6 on my iPhone4 and everything works fine, so far. However, I have a minor problem, rather a puzzlement: I am trying to figure out, how (on earth) one can delete the contents of the "iCloud Tabs" on the iPhone! There is no
-
Hi, my MacBook says Adobe Flash Player is out of date???
Hi, First, I got a message saying that Adobe Flash Player was out of date. Then, when I went to the Adobe Flash website, it said "Adobe® Flash® Player requires Mac OS 10.6 or higher." My computer is a Mac OS X Version 10.5.8. Does this mean I have to