Batch-Input/CALL TRANSACTION FB01: Trading Partner cannot be filled in

Dear experts,
I have the following problem with performing an FB01 booking on the basis of
CALL TRANSACTION USING:
In the customizing of the FI document type you can mark several fields that
are supposed to appear when you perform an FB01 posting, among them
the "Trading partner". But this field only seems to show in Non-BTCI-mode.
There are SAP Notes treating the phenomenon of the additional COBL-data
screen being always brought up with all available fields in BTCI mode
(which is fine for me, since I actually want to fill in some fields there, too),
but this screen does not contain the trading partner and I can't find any hint
why fields like BSEG-VBUND (trading partner) apparently cannot be reached
at all in BTCI-Mode.
Does anybody know this problem, or better yet: have a solution ?
Thanks in advance
Andreas

Hello Akanksha,
I suppose you're interested in how you make the fields available/visible
in the posting transactions ?
BSEG-VBUND/Trading partner for instance belongs to the
supposed-to-be-available checkbox-selection in customizing of the
document type you are going to use for your posting.
The availability of the additional controlling fields (cost center, order no. etc.)
depends on the cost accounting being active and on the field status group
that is chosen for your account.
In the booking/posting transactions you reach the fields with the button
"further data".
Best regards
Andreas

Similar Messages

FB05 Batch Input / Call Transaction - Does not select amount for payment

Hi,
When I launch the FBWD transaction (returned bills of exchange), the call transaction for G/L account postings is in error. So the FBWD automatically creates a batch input, but when I tried to launch the batch input, it remains unsuccessful.
So I launched the BI in foreground, I can see that the first steps of the account postings are OK, but the BI stops when assigning the payment amounts : the BI found the different postings to clear, but it waits to enter the payment amount.
Manually, I just have to click on 'Accept' or enter the payment amount and click on 'Continue'.
=> Is there anything to do so that there is no payment amount to fill? (there should be something because the FBWD is a standard transaction, so it should work!!)
Can you help me on this?
Thx

Hi.
Yes the issue has been resolved.
You just have to configure your master record (FS00) by ticking the box 'relevant to cash flow' (XGKON).
Hope it will help you.
Bernard.

Error in Batch input : Call Transaction

Hi Gurus,
I have written a BDC for tcode "S_ALR_87013620" to send the report output to spool.
When I recrod from menu Report->Print i get the dialog box to to enter the printer name.
and then i get a popup box saying "Format is X_65_132" then i press Yes button this pop up.
This popup box is not getting recorded in BDC, when i execute the report it is failinng.
Call Transaction is returing sy-subrc eq 1001.
how can i avoid this popup box.

hi
in window <background print parameters> press button <properties> and then
in next window <spool request attributes> select "general attributes->format"
here press button <settings> and in next window for field <PAART Format> select
function <Copy settings>
now, this popup should not appears....
regards,darek

Batch input / call transaction

hi,
happy new year to everybody.
in the table whcih contains errors messages in call transaction (BDCMSGCOLL). the message, which has MSGTYP = 'S' and MSGNR = '100', is a message of succes or not?.

I would like to say yes, which many people will. But I ran a call transaction some time ago and had an issue with using the MSGTYP field.
Use SE91 using the Message ID to get a description of the actual message.

Agreement lookup failed as From trading partner cannot be identified

Hi,
I am working on custom document over HTTPS.
I configured B2B to send custom document over Generic Exchange(transport - HTTPS).
I enqueue the XML document with AQ header to IP_OUT_QUEUE. B2B is able to read the data from IP_OUT_QUEUE and invokes the client Webapplication.
I changed the IP_OUT_QUEUE to custom AQ. B2B is able to read data from custom AQ, but B2B throws "Trading partner agreement lookup failed as From trading partner cannot be identified"
b2b.log:
2010.02.15 at 13:03:44:470: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2010.02.15 at 13:03:44:471: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2010.02.15 at 13:03:44:497: Thread-22: B2B - (DEBUG)
Protocol = AQ
Version = null
Transport Header
aq.receiver.expiration:-1
aq.receiver.delay:0
aq.receiver.priority:1
aq.receiver.correlation:b2buser
2010.02.15 at 13:03:44:881: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2010.02.15 at 13:03:44:907: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned on, will listen on IP_OUT_QUEUE for messages
2010.02.15 at 13:03:44:921: Thread-19: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
2010.02.15 at 13:03:45:069: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppInterfaceListener:onMessage calling processOutgoingMessage
2010.02.15 at 13:03:45:069: Thread-22: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Enter
2010.02.15 at 13:03:45:070: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.02.15 at 13:03:45:070: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.02.15 at 13:03:45:071: Thread-22: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.02.15 at 13:03:45:076: Thread-22: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:077: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage To TP Namenull
2010.02.15 at 13:03:45:078: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage From TP Namenull
2010.02.15 at 13:03:45:078: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage business action name: null
2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype name: null
2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype revision: null
2010.02.15 at 13:03:45:079: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage AppMsgIdnull
2010.02.15 at 13:03:45:094: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage ipmsg.get_MSG_TYPE = 1
2010.02.15 at 13:03:45:095: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: null Type: null Value: null to TPName: null Type: null Value: null
2010.02.15 at 13:03:45:095: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2B Message ID is 0A4DBD67126D1BA2FC700000136A1AD0
2010.02.15 at 13:03:45:099: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage RefTo B2B Message ID is null
2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage isSignalMsg() == false; call outgoingTPA
2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processOutgoingTPA() Begin TPA Processing..
2010.02.15 at 13:03:45:100: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (before calling processParty) :
initial : null
from : TPName: null Type: null Value: null
to : TPName: null Type: null Value: null
final : null
initiating : TPName: null Type: null Value: null
2010.02.15 at 13:03:45:101: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() direction is outgoing
2010.02.15 at 13:03:45:102: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() calling processparty with : TPName: null Type: null Value: null
2010.02.15 at 13:03:45:102: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Begin..
2010.02.15 at 13:03:45:112: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() after calling processparty with : TPName: Acme Type: null Value: null
2010.02.15 at 13:03:45:112: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (after calling processParty):
initial : null
from : TPName: Acme Type: null Value: null
to : TPName: null Type: null Value: null
final : null
initiating : TPName: Acme Type: null Value: null
2010.02.15 at 13:03:45:113: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() docTypeName: null docTypeRevision: null
2010.02.15 at 13:03:45:118: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() actionName: null actionRevision: null
2010.02.15 at 13:03:45:119: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() Set actionRevision in MessageInfo: null
2010.02.15 at 13:03:45:119: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() Obtain DocType using actionName and actionRevision.
2010.02.15 at 13:03:45:124: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getCollaborationDetails() Begin.. Activity Name : null Activity Version: null
2010.02.15 at 13:03:45:125: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() eventName:<null>
2010.02.15 at 13:03:45:125: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() messageType:1
2010.02.15 at 13:03:45:126: Thread-22: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: Acme Type: null Value: null to TPName: Acme Type: null Value: null
2010.02.15 at 13:03:45:127: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() cpaID=null
2010.02.15 at 13:03:45:127: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2010.02.15 at 13:03:45:128: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2010.02.15 at 13:03:45:128: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() Begin..
2010.02.15 at 13:03:45:129: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA()
From Party -> null-null-Acme-null To Party -> null-null-null-null Business Action name -> null
2010.02.15 at 13:03:45:130: Thread-22: B2B - (ERROR) Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
2010.02.15 at 13:03:45:131: Thread-22: B2B - (ERROR) Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
2010.02.15 at 13:03:45:131: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2BDomainException
2010.02.15 at 13:03:45:132: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Error Message: Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
2010.02.15 at 13:03:45:132: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2010.02.15 at 13:03:45:209: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message not found.
2010.02.15 at 13:03:45:211: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2010.02.15 at 13:03:45:212: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2010.02.15 at 13:03:45:353: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name null
2010.02.15 at 13:03:45:354: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value nullnull
2010.02.15 at 13:03:45:367: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
2010.02.15 at 13:03:45:397: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2010.02.15 at 13:03:45:398: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2010.02.15 at 13:03:45:471: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2010.02.15 at 13:03:45:472: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Native Event Tbl Row
2010.02.15 at 13:03:45:472: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2010.02.15 at 13:03:45:476: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg wiremsg not found
2010.02.15 at 13:03:45:477: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException notifying App
2010.02.15 at 13:03:45:477: Thread-22: B2B - (DEBUG) Engine:notifyApp Enter
2010.02.15 at 13:03:45:485: Thread-22: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A4DBD67126D1BA2FC700000136A1AD0</b2bMessageId>
<errorCode>AIP-50548</errorCode>
<errorText>Trading partner agreement lookup failed as From trading partner cannot be identified</errorText>
<errorDescription>
<![CDATA[Machine Info: (dgda21a)
Description: Make sure the trading partner has name, type, and value information
StackTrace:
Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
        at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:230)
        at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:598)
        at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:222)
        at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1074)
        at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
        at oracle.tip.transport.basic.aq.AQDequeuer.dequeue(AQDequeuer.java:348)
        at oracle.tip.transport.basic.aq.AQDequeuer.run(AQDequeuer.java:211)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2010.02.15 at 13:03:45:512: Thread-22: B2B - (DEBUG) Engine:notifyApp Exit
2010.02.15 at 13:03:45:513: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
2010.02.15 at 13:03:45:513: Thread-22: B2B - (DEBUG) DBContext commit: Enter
2010.02.15 at 13:03:45:516: Thread-22: B2B - (DEBUG) DBContext commit: Transaction.commit()
2010.02.15 at 13:03:45:516: Thread-22: B2B - (DEBUG) DBContext commit: Leave
Kindly help me to resolve this issue.

hi Anuj,
I am enqueuing from BPEL process. I have set the AQ header.
<b2bMsgHeader><Header xmlns="http://xmlns.oracle.com/pcbpel/adapter/aq/publishB2BMessage/">
<QueueHeader/>
<PayloadHeader>
<MSG_ID xmlns="">2SY16SY_TEST_FEB15_07E01null2010021513270041</MSG_ID>
<INREPLYTO_MSG_ID xmlns=""/>
<FROM_PARTY xmlns="">Acme</FROM_PARTY>
<TO_PARTY xmlns="">GlobalChips</TO_PARTY>
<ACTION_NAME xmlns="">ProcessBusiness</ACTION_NAME>
<DOCTYPE_NAME xmlns="">DocType</DOCTYPE_NAME>
<DOCTYPE_REVISION xmlns="">1.0</DOCTYPE_REVISION>
<MSG_TYPE xmlns="">1</MSG_TYPE>
<PAYLOAD xmlns="">XML payload</PAYLOAD>
<ATTACHMENT xmlns=""/>
</PayloadHeader>
</Header>
</b2bMsgHeader>

Call transaction FB01 vs submit RSBDCSUB

Hi guys,
I would like to know how I can get the message log when I execute
SUBMIT RSBDCSUB WITH MAPPE EQ G_GROUP "batch input name
                      WITH Z_VERARB EQ 'X'
                      WITH FEHLER EQ SPACE
                      WITH LOGALL EQ SPACE
                      EXPORTING LIST TO MEMORY
                      AND RETURN.
instead of :
CALL TRANSACTION 'FB01' USING BDCDATA
                  MODE 'N' UPDATE 'S'
                  MESSAGES INTO MESSTAB.
I would like get the same information of MESSTAB but using submit RSBDCSUB
I try it with :
CALL FUNCTION 'LIST_FROM_MEMORY'
        TABLES
          LISTOBJECT = LISTOBJECT
        EXCEPTIONS
          NOT_FOUND = 4
          OTHERS     = 8.
CALL FUNCTION 'LIST_TO_ASCI'
        EXPORTING
          LIST_INDEX         = -1
        TABLES
          LISTASCI           = VLIST
          LISTOBJECT         = LISTOBJECT
        EXCEPTIONS
          EMPTY_LIST         = 1
          LIST_INDEX_INVALID = 2
          OTHERS             = 3.
      CALL FUNCTION 'LIST_FREE_MEMORY'
        TABLES
          LISTOBJECT = LISTOBJECT.
And in VLIST I only get the number of folder with G_GROUP batch info.
for example " 2 folder get it". I would like to know for example if there are errors in my batch input.
Thanks a lot in advance.
Best regards.
Ana

I'd not suggest your solution.
better use RFBIBL00 ( or BAPI_ACC_DOCUMENT_POST - read docu)
for rfbibl00 you can use
SUBMIT RFBIBL00 WITH callmode = 'D'....
A.

Trading partner agreement lookup failed as From trading partner cannot be i

Hi,
I am sending 850 EDI XML to our Penske trading partner, Its throwing below error. Could anyone helpme how to resolve this issue. Please do the needful.
our sender id is EMR and receiver id is Penske( I am also attaching a file which i am processing)
Machine Info: (essapt020-u009.emrsn.com)
Description: Make sure the trading partner has name, type, and value information
StackTrace:
Error -: AIP-50548: Trading partner agreement lookup failed as From trading partner cannot be identified
     at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:199)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:589)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:221)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1061)
     at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
     at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:903)
     at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:317)
File which i processed
<?xml version="1.0" ?>
- <Transaction-850 xmlns="urn:oracle:integration:b2b:BD5A9C92A91F474292233E610E5258F9" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="1.0" Standard="X12" Version="V4010" CreatedDate="2009-09-14T06:20:48" CreatedBy="ECXEngine_837" GUID="{3A6795B0-F6A0-DE11-B354-00144F86C7D4}">
- <Internal-Properties>
- <Data-Structure Name="Interchange">
<Lookup Name="InterchangeSenderQual">ZZ</Lookup>
<Lookup Name="InterchangeSenderID">EMR</Lookup>
<Lookup Name="InterchangeReceiverQual">ZZ</Lookup>
<Lookup Name="InterchangeReceiverID">Penske</Lookup>
<Lookup Name="InterchangeControlVersion">00401</Lookup>
<Lookup Name="Standard">X12</Lookup>
<Property Name="InterchangeAuthorizationInfoQual">00</Property>
<Property Name="InterchangeAuthorizationInfo" />
<Property Name="InterchangeSecurityInfoQual">00</Property>
<Property Name="InterchangeSecurityInfo" />
<Property Name="InterchangeSenderQual">ZZ</Property>
<Property Name="InterchangeSenderID">EMR</Property>
<Property Name="InterchangeReceiverQual">ZZ</Property>
<Property Name="InterchangeReceiverID">Penske</Property>
<Property Name="InterchangeDate">090909</Property>
<Property Name="InterchangeTime">1419</Property>
<Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property>
<Property Name="InterchangeControlVersion">00401</Property>
<Property Name="InterchangeControlNumber">000085390</Property>
<Property Name="InterchangeAckRequested">0</Property>
<Property Name="InterchangeUsageIndicator">P</Property>
<Property Name="InterchangeComponentElementSep">0x3e</Property>
<Property Name="DecimalSeparator" />
<Property Name="ElementDelimiter">0x2a</Property>
<Property Name="ReleaseCharacter" />
<Property Name="RepeatingSeparator" />
<Property Name="SegmentDelimiter">0x7e</Property>
<Property Name="SubelementDelimiter">0x3e</Property>
<Property Name="InterchangeChildCount">1</Property>
<Property Name="InterchangeTrailerControlNumber">000085390</Property>
- <Data-Structure Name="Group">
<Lookup Name="GroupSenderID">EMR</Lookup>
<Lookup Name="GroupReceiverID">Penske</Lookup>
<Lookup Name="GroupVersionNumber">004010</Lookup>
<Property Name="GroupID">PO</Property>
<Property Name="GroupSenderID">EMR</Property>
<Property Name="GroupReceiverID">Penske</Property>
<Property Name="GroupDate">20090909</Property>
<Property Name="GroupTime">1419</Property>
<Property Name="GroupControlNumber">85364</Property>
<Property Name="GroupAgencyCode">X</Property>
<Property Name="GroupVersionNumber">004010</Property>
<Property Name="GroupChildCount">1</Property>
<Property Name="GroupTrailerControlNumber">85364</Property>
- <Data-Structure Name="Transaction">
<Lookup Name="TransactionID">850</Lookup>
<Property Name="TransactionID">850</Property>
<Property Name="TransactionControlNumber">0001</Property>
<Property Name="TransactionImplementationReference" />
<Property Name="TransactionChildCount">24</Property>
<Property Name="TransactionTrailerControlNumber">0001</Property>
</Data-Structure>
</Data-Structure>
</Data-Structure>
</Internal-Properties>
- <Segment-ST>
<Element-143>850</Element-143>
<Element-329>0001</Element-329>
</Segment-ST>
- <Segment-BEG>
<Element-353>00</Element-353>
<Element-92>SA</Element-92>
<Element-324>16010055985</Element-324>
<Element-328 xsi:nil="true" />
<Element-373>20090909</Element-373>
<Element-367 xsi:nil="true" />
<Element-587>AC</Element-587>
<Element-1019 xsi:nil="true" />
<Element-1166 xsi:nil="true" />
<Element-1232 xsi:nil="true" />
<Element-786>03</Element-786>
</Segment-BEG>
- <Segment-CUR>
<Element-98>2L</Element-98>
<Element-100>USD</Element-100>
</Segment-CUR>
- <Segment-REF>
<Element-128>06</Element-128>
<Element-127 xsi:nil="true" />
<Element-352>ALICE.EMRSN.COM:oracle.apps.po.event.xmlpo:458153-325924</Element-352>
</Segment-REF>
- <Segment-FOB>
<Element-146>CC</Element-146>
<Element-309>ZZ</Element-309>
<Element-352>UCC FOB DEST COL</Element-352>
<Element-334 xsi:nil="true" />
<Element-335 xsi:nil="true" />
<Element-309_1>ZZ</Element-309_1>
<Element-352_1>FOB Shipping Point</Element-352_1>
</Segment-FOB>
- <Segment-ITD>
<Element-336 xsi:nil="true" />
<Element-333 xsi:nil="true" />
<Element-338 xsi:nil="true" />
<Element-370 xsi:nil="true" />
<Element-351 xsi:nil="true" />
<Element-446 xsi:nil="true" />
<Element-386 xsi:nil="true" />
<Element-362 xsi:nil="true" />
<Element-388 xsi:nil="true" />
<Element-389 xsi:nil="true" />
<Element-342 xsi:nil="true" />
<Element-352>NET75 EOM</Element-352>
</Segment-ITD>
- <Loop-N1>
- <Segment-N1>
<Element-98>VN</Element-98>
<Element-93>XPEDX</Element-93>
<Element-66>US</Element-66>
<Element-67>160000511</Element-67>
</Segment-N1>
- <Segment-N3>
<Element-166>2099 CORPORATE 44 DRIVE</Element-166>
</Segment-N3>
- <Segment-N4>
<Element-19>FENTON</Element-19>
<Element-156>MO</Element-156>
<Element-116>63026</Element-116>
<Element-26>US</Element-26>
</Segment-N4>
</Loop-N1>
- <Loop-N1>
- <Segment-N1>
<Element-98>BT</Element-98>
<Element-93>EMC OU CIM</Element-93>
</Segment-N1>
- <Segment-N3>
<Element-166>Emerson Motor Company,</Element-166>
<Element-166_1>a Division of Emerson Electric Co. PO BOX 4147</Element-166_1>
</Segment-N3>
- <Segment-N4>
<Element-19>Saint Louis</Element-19>
<Element-156>MO</Element-156>
<Element-116>63136</Element-116>
<Element-26>US</Element-26>
</Segment-N4>
</Loop-N1>
- <Loop-N1>
- <Segment-N1>
<Element-98>SO</Element-98>
<Element-93>EMC OU CIM</Element-93>
</Segment-N1>
- <Segment-N3>
<Element-166>8100 West Florissant Ave</Element-166>
<Element-166_1>PO Box 3946</Element-166_1>
</Segment-N3>
- <Segment-N4>
<Element-19>Saint Louis</Element-19>
<Element-156>MO</Element-156>
<Element-116>63136</Element-116>
<Element-26>US</Element-26>
</Segment-N4>
</Loop-N1>
- <Loop-N1>
- <Segment-N1>
<Element-98>CA</Element-98>
<Element-93>SEE EMERSON ROUTING</Element-93>
</Segment-N1>
</Loop-N1>
- <Loop-PO1>
- <Segment-PO1>
<Element-350>1</Element-350>
<Element-330>4800</Element-330>
<Element-355_1>EA</Element-355_1>
<Element-212>116</Element-212>
<Element-639 xsi:nil="true" />
<Element-235_1 xsi:nil="true" />
<Element-234_1 xsi:nil="true" />
<Element-235_2>SW</Element-235_2>
<Element-234_2>P062155530000</Element-234_2>
</Segment-PO1>
- <Loop-PID>
- <Segment-PID>
<Element-349>F</Element-349>
<Element-750 xsi:nil="true" />
<Element-559 xsi:nil="true" />
<Element-751 xsi:nil="true" />
<Element-352>PAD (BOX)</Element-352>
</Segment-PID>
</Loop-PID>
- <Loop-N1_2>
- <Segment-N1>
<Element-98>ST</Element-98>
<Element-93>CIM IO Plant CMD</Element-93>
<Element-66>FA</Element-66>
<Element-67>INTERNALC01</Element-67>
</Segment-N1>
- <Segment-N3>
<Element-166>Boul Carlos Salinas de Gortari</Element-166>
<Element-166_1>Kilometro 9.7</Element-166_1>
</Segment-N3>
- <Segment-N4>
<Element-19>Apodaca</Element-19>
<Element-156>NL</Element-156>
<Element-116>66600</Element-116>
<Element-26>MX</Element-26>
</Segment-N4>
- <Segment-SCH>
<Element-380_2>4800</Element-380_2>
<Element-355>EA</Element-355>
<Element-98_1 xsi:nil="true" />
<Element-93 xsi:nil="true" />
<Element-374_5>112</Element-374_5>
<Element-373>20090910</Element-373>
<Element-337 xsi:nil="true" />
<Element-374 xsi:nil="true" />
<Element-373_1 xsi:nil="true" />
<Element-337_1 xsi:nil="true" />
<Element-326 xsi:nil="true" />
<Element-350>1</Element-350>
</Segment-SCH>
</Loop-N1_2>
</Loop-PO1>
- <Loop-CTT>
- <Segment-CTT>
<Element-354>1</Element-354>
</Segment-CTT>
</Loop-CTT>
- <Segment-SE>
<Element-96>24</Element-96>
<Element-329>0001</Element-329>
</Segment-SE>
</Transaction-850>

Hi Srinivas,
I am in dilemaaa whether i need to take a EDI x12 over internet and EDI x12 over genric exchange.I think this is something which you should discuss with your TP and as per the availability and requirement a decision should be made.
If you are using FTP protocol in internal delivery channel, then you need to follow the file naming convention to provide B2B required information to identify the TP and transaction. For this please refer -
http://www.b2bgurus.com/search/label/Generic%20File
To know more about TP identification in EDI, please refer -
http://www.b2bgurus.com/2007/08/trading-partner-identification-in-edi.html
Regards,
Anuj

BATCH-INPUT On transaction VT02 does not work.

Greetings, colleagues!!!
I have written BATCH-INPUT on transaction VT02. I try to remove delivery from transportation. But for me does not work BATCH-INPUT because function of "Positioning" does not work in BATCH-INPUT. Prompt please. How I can remove delivery from transportation in my program using functionality of transaction VT02?
Thanks for the help.
Sergey Kozymaev.

I used this in a program a while ago, worked like a charm.
s_header-shipment_num = <shipment #>.
i_item-delivery = <delivery #>.
APPEND i_item.
i_itemaction-delivery = 'D'.
i_itemaction-itenerary = 'D'.
APPEND i_itemaction.
CALL FUNCTION 'BAPI_SHIPMENT_CHANGE'
    EXPORTING
      headerdata       = s_header
      headerdataaction = s_headeraction
    TABLES
      itemdata         = i_item
      itemdataaction   = i_itemaction
      return           = i_return.

BAPI or Batch Input Program for FB01

Hi all!
I am trying to post invoice through transaction code FB01, i need a standard BAPI program or Batch Input Program for FB01 (except recording).
thanks.

Hello,
In the 'Specify Files' step,
1. give some short file name (about 20 Characters )
2. In the File option for 'Converted Data' option check the Logical path / logical file entries. Normally it is LSMW ( Logical Path ) and the same File name for logical file. If you do not have a Logical path 'LSMW' create one in Tx. FILE'.
3. Please note that you need authority to save the file on application server ( You can see the files on Appl. Server in Tx. AL11 ).
Let me know how it goes on!
Regds, Murugesh AS
Message was edited by: Murugesh Arcot
Message was edited by: Murugesh Arcot

Batch input to transaction VG01

hi abapers
i want to do a batch input to transaction VG01, the problem is that when i have more than the rows
on screen (and this is according to user screen resulotion) i need to use page down button how can i avoid this.
thanks
Amit

Hi,
Check this link..may be it will help u..
http://www.sapfans.com/sapfans/repos/comelite.htm
Regards,
JOy.

R/3 report of transactions with trading partner

Hi
I posted intercompany transaction (using trading partner). I need to know if there is any tcode for R/3 report which will show transactions with trading partners. I require for AR AP GL transactions.
I came to know that there is some tcode which will show transaction of one trading partner in another books and vice versa. I checked into information system. But i didn't got.
Please let me know

Hi,
For reconciling associated companies, you can access these from the SAP application menu as follows:
SAP menu -> Accounting -> Financial Accounting -> Accounts Receivable or Accounts Payable -> Periodic Processing -> Closing -> Check/Count -> Cross-System Intercompany Reconciliation
These programs provide more functions and flexibility, and they enable you to reconcile data across different systems.
You carry out the Customizing for these programs in the SAP Customizing Guide under:
SPRO> Financial Accounting or Financial Accounting (New) -> Accounts Receivable and Accounts Payable Accounting -> Business Transactions -> Closing -> Count -> Cross-System Intercompany Reconciliation
Regards,
Gaurav

Batch Input at transaction AS02

When I try to do a batch input on transaction AS02,
it returns to me an error:
Runtime error GETWA_NOT_ASSIGNED has occurred.
someone knows what is happening?
thanks!
Ricardo

Hi Rob.
This note has been applied. We have this package here:
EA-APPL 600 0010 SAPKGPAD10 SAP R/3 Enterprise Extension PLM, SCM, Financials
Thanks!
Ricardo

Batch input call transcation performance

Hi ,
We built a tool to generate production versions and recipes via batch input call transcation method .
We did test to generate PVs and recipes for 3500 items (each item have 6 pvs and recipes) and it took 65 hours
the performance is not so good , could give some suggestion to improve the performance ?
Thanks !

hi
Create PVs separately & recipies separately
Regards
S

Account 12221001 requires trading partner to be filled

Hi
The user had some old documents and he is trying to clear them.
During clearing he is facing an error "Account 12221001 requires trading partner to be filled"
Trading partner field is blank in the reconciliation account 12221001 and also customer account.
BSEG of the document which gives the problem. The reconciliation account is 12221001, the trading partner for the customer line is not filled in.
How can we fill the trading partner on this line item?
Thanks in Advance,
Deepthi.

hi,
trading partner field is populated from account , customer or vendor.
if your customer wants to clear old documents, most probably, some documents are filled with trading partner field and others are not.
in this situation you cannot clear these documents.
i have faced the same iproblem. to solve it, you should determine the balance of trading partner included documents,
you should post two documents using a dummy document.
lets say the balance is 20.000 usd
you should post: (initially you should maintain trading partner field in customer data)
DR/CR customer.........20.000usd
CR/DR dummy acc. ..........20.000 usd
second posting ( you should clear the trading partner field in customer data)
CR/DR custoemr......20.0000usd
DR/CR dummy acc.....20.000 usd
now you can clear items with trading partner is filled.

CV02n - Batch inpu / call transaction

Hi,
I am unable to run t-code CV02n in background for batch input purposes using LSMW.
Can we do a BDC for CV02n and run it backgroung mode? Is it possible .. Since it is a enjoy transaction.
I have also explored a couple of BAPI's, which does not suite my requirement.
It gives me error as follows when I run it using session method:
Control Framework: Fatal error - GUI cannot be reached
Message no. DC 006
Diagnosis
When the Control Framework is started, the system checks whether the installed GUI supports frontend components such as controls. This check failed; the causes may be as follows:
1.) The program is running in the background
2.) A transaction was called using CALL TRANSACTION ... STARTING IN BACKGROUND TASK.
Procedure
Programs that run in the background cannot address controls on the frontend. In this case, the application must either include a fallback that does not depend on the user interface, or the program or transaction must detect for itself that is running in the background and terminate itself.

CV02N use functions unavailable for batch-input. (actual enjoy transaction)
So don't even try to use it. before going through [Note 368680 - Short dump using CV01N, CV02N in background|https://service.sap.com/sap/support/notes/368680].
Did you look for a BAPI starting with BAPI_DOCUMENT suited to your needs?
Regards

Batch-Input/CALL TRANSACTION FB01: Trading Partner cannot be filled in

Similar Messages

Maybe you are looking for