Batch input from sproxy

Hi
I want to use batch input to clear field in vl02n(dleivery),when the batch input is called from sproxy(XI) there is mix in the screens and he oesn't find the field in the batch input screen and therfore doesn't clear the field.
When i copy the batch input to other program its works( not using sproxy ).
How i can solve the problem?
Thanks
Have a nice day

Hello,
have you tried to record the Batch Input via Transaction SM35 and create a function module out of it?
Regards
Gregor

Similar Messages

Upgrade batch inputs from 4.6C to mySAP ERP 2005

Hi,
we are planning to upgrade from 4.6C to mySAP ERP 2005 (ECC 6.0). We are using batch input/call transaction in various (interface) programs (primarily in modules SD, MM, CS/SM, FI, CO). I would be grateful for any information that helps to estimate the effort to upgrade our batch input code. In which areas/modules/transactions did you encounter problems with batch inputs? How severe were these problems (one or two fields moved to another screen, or major redesign)? How did you address these problems (change BI or convert code to use BAPI)?
Thank you
Thomas

Hi thomas,
we were working on batch input's and our scenario is something like convertion of bdc's from 4.5b to ECC5. well, it was a long process of upgradation. and coming to the part of BDC's
Q) any information that helps to estimate the effort to upgrade our batch input code.
   we had 300 BDC's to convert from 4.5b to ECC5 and with a ten member team of ABAP experts it took us 30 working days to complete the process.
Q) In which areas/modules/transactions did you encounter problems with batch inputs?
   Mostly, we had problems from FI and something like in Revenue recognition process. The problems comes, when the whole transactions screens changes for the process. at this time we have to write completly a new BDC's. if we have right functional specifications and functional experts, it will be easy to convert BDC's.
Q) How severe were these problems (one or two fields moved to another screen, or major redesign)?
    As i have mentioned, out of 300 almost 25 to 50 were minor changes rest were huge changes. a completely new BDC's. the point here is, we were updating from 4.5b to ECC5. it might not be this scenario for 4.6c to ECC5
Q) How did you address these problems (change BI or convert code to use BAPI)?
   well, this is were we are curently working now. and curently there are 4 scenarios (and may be more in the future) were we have to replace three BDC's which are used for material master creation and make it into one bapi satisfying all the conditions of BDC's. actually, we have to find a BAPI( which i couldn't find) so, i have created a bapi. and tougher part is writing exceptions as we cannot write exceptions as we do in function module.
hope this is relavent to what you have asked.
cheers
ajay

Calling Batch input from Web Dynpro - any alternatives for table updates?

Hi!
I am asked to create a screen in Web Dynpro for the GJ30 transaction (JV Cutback mapping of WBS' elements). I created a remote enabled function module which call batch input for GJ30 . Testing the Function modules direclty goes fine, but not calling the function module from WD. then I get the same error message as when I once tried to call SAP GUI from Web Dynpro ( Call transaction /submit program).
My next step is to try to create a batch input session (instead of call transaction) and run it using rsbdcsub, and then check the result of the run. But maybe this will fail of the same reason as well, and I suppose this will make the user waiting longer for the response .
I read somewhere that Web Dynpro does not support batch Input. But what can you do when there are no standard BAPI's for the update you want to do in SAP ? We are not supposed to do direct table updates.
Anyone who have struggled with the same issues and found a solution??
regards, Tine

Hi,
as BDC is calling screens and in Webdynpro ABAP you cannot use SAP GUI sceeen, you are getting short dump.
Refer CNTL_SYSTEM_ERROR in webservices from r/3 system
Thanks,
Chandra

FB60 batch input from MS Excel file

Dear experts,
We want to post regular acquisitions from appr. 200 vendors each month (amounts each month are different). We need to post different vendors to different cost centers, segments and other assignment elements/objects. I suppose that we need to use a batch input by importing a MS Excel spreadsheet, because software where we are tracking those payables makes export just into Excel. In SAP we have separate Vendors Master Data for all 200 vendors. Please help me to create batch input program for this monthly batch postings. How to define SAP field correspondence with Excel cells, and etc.?
(P.S. Im quite new in batch input functionalities)

Hi Stephen,
I still not have any responds using LSMW. I tried to use for this Standard Batch/Direct Input Object - 0100 Financial Documents but this object allows to use just t.code FB01, and as you mentioned in your previous message, there no choices to assign Vendor ID field, or Posting Key field. So this option did not pass to me too. Then I found t.code SHDB, maybe it is quite complicated process, but for me it works and I have posted invoices from my 200 vendors. I just convert my data within excel spreadsheet in appropriate manner (rows must be transposed to columns), save it in .txt file and import to SAP within SHDB, and push the button Process. First few times system gave me errors, but there were inaccuracies in .txt file, after little corrections everything started to work.
I am not sure if t.code SHDB will work for you, because you need to upload your legacy and not current data, but you could try.

Create batch input, does not include all records

Have anyone experienced, when doing Create Batch Input from the LSMW menu it does not include all rows.
For example I have a .txt file with 3000 records that I specify in "Specify Files"
"Read Data" reads 3000 records.
"Convert Data" Converts 3000 records
"Create Batch input Sessions" creates 2461 records? ?
I have noticed that this happen when the system is busy running many batches and Idocs.

I'm talking about LSMW programs with regular Batch input Recording.
I haven't noticed which transactions it skips since I do not run the Batch, when I notice that it does not include all rows as I have read and converted.
However usually if I "Create the batch input session" once again it includes all the records from the conversion before.
But since Create a batch input can take a long time depending on the amount of transactions it creates this is not a desired option.
So it is not possible that the transactions it does not create are errors since its possible to run them successfully. And I haven't used any SKIP TRANSACTION in the mapping step.
But like I said this only happens when the system is running many batches / idocs at the moment, for example if we are loading the material master at the same time as I run my batch input programs.

Batch Input in RFC function module

Hi,
I am creating a function that change the location of an equipment in transaction IE02. When i execute this function from SAP it works fine, but when its call from .Net connector does not work, no changes to equipment are realized. i am using call transaction to generate a batch input mode.
i have used submit to programs with the necessary code to execute call transaction IE02 but the results are the same.
How can i execute a batch input from rfc funtion module?
thanks,
Alejandro
Message was edited by: Alejandro López

Alejandro,
Tengo problemas similares con una rfc y batch input.
Serías tan amable de enviarme el código de la rfc para revisar, chequee los permisos pero igual no actualiza datos.
Gracias.

General question: How to execute a batch input using different user name?

Hi everyone,
I would be very grateful if someone could tell me how to execute a batch input from source code using a differente username so the batch input is executed with different permissions.
For example, I log on with:
Username: A
, but I'd like to execute a batch input using the rights and permissions of user B.
Thanks in advance and best regards.
Ben.

If you are calling the BDC in a program, create a job to run the program and specify the user you want each program to run under.

Step by step batch input

Hi friends,
Please tell me about how to create a batch input from beginning to end.
How can I achieve the entry of the data?
sm35 or shdb is used to record the transaction steps?
One says sm35, the other says shdb?
Step by step?
Thanks in advance.

Hi,
BDC option
ABAP Runtime Environment (BC-ABA)
Batch Data Communication option.
BDC options define the processing mode for a batch input session.
Examples of modes used for processing sessions are:
     Display all records.
     Display for error dialogs only.
     Process session in the background.
     Process session on the screen.
Purpose
During data transfer, data is transferred from an external system into the SAP R/3 System. You can use data transfer when you:
     Transfer data from an external system into an R/3 System as it is installed.
     Transfer data regularly from an external system into an R/3 System. Example: If data for some departments in your company is input using a system other than the R/3 System, you can still integrate this data in the R/3 System. To do this, you export the data from the external system and use a data transfer method to import it into the R/3 System.
Implementation considerations
Before creating your own data transfer program, you should use the Data Transfer Workbench to find the data transfer programs that are delivered by SAP.
The Data Transfer Workbench
Purpose
The Data Transfer Workbench supports the automatic transfer of data into the R/3 System.
The Workbench is particularly useful for large amounts of data. It guarantees that data is transferred efficiently and ensures that data in the R/3 System is consistent.
Features
The Data Transfer Workbench provides the following functions:
     Integration of standard data transfer programs
     Registration and integration of your own data transfer programs
     Various techniques to load data into R/3.
The data is read from a transfer file in SAP format and loaded into the R/3 System using one of the techniques below:
     Administration and organization of data transfer projects
     Tools for analyzing the required SAP structures
     BAPI interface
     Batch input
     Direct input
Integration
SAP applications support the data transfer of numerous SAP business objects. The data transfer program specifies the data format definition that is necessary to import the data into the R/3 System. Adapt your conversion program for exporting the data from the external system to this definition.
Once the data has been exported, you can import it into your system using a generated data transfer program.
Features
     Data transfer from other, external systems
     Generation of data transfer programs
     Generation of function modules that can be used as an interface to the R/3 System
Initial Data Transfer
Prerequisites
Before you start the initial data transfer, you should have answered the following questions:
     Which business objects are to be transferred?
The objects to be transferred depend on the business applications you are using. If you are using sales and distribution processing, for example, you should transfer the material master records as well as the sales master records .
     How should the business objects be transferred?
Various techniques are available to load the data into the R/3.
Process Flow
The process of transferring data can be divided into the steps:
1.     Preparing the data transfer
     Analyzing and Cleaning Legacy Data
     Analyzing SAP Structures
     Developing Programs, Function Modules and BAPIs
     Creating a Program or FM for Data Extraction
     Creating a Mapping Program
     Registering Programs, Function Modules and BAPIs
1.     Executing the data transfer
     Organizing the Transfer in Projects
     Executing Data Transfer Runs, monitoring (CCMS) and processing (log)
     Checking transferred objects in R/3 using a function module or report (task type AUD).
The graphic below describes the steps involved in transferring the data:
ThThe The Data Transfer Workbench is an integrated project management for all the required steps involved in transferring data to your R/3 System.
You need to use programs or function modules for the various steps. SAP provides a range of BAPIs for loading data into R/3.
You could also carry out all the steps, except for loading the data via BAPIs, without using the Data Transfer Workbench.
In the first step you extract the existing data from a source system into a file and clean it there, if necessary.
To load data into R/3 you need a transfer file in an appropriate SAP format.
Using a mapping program you have to map the extracted data to the structures of the transfer file.
To load the data into the R/3 System one of the Techniques is used depending on the type of business object . I f more than one of these techniques is provided for a particular object type, you should read the documentation to find out what the different uses are .
Once you have created a project, you can start a run. The tasks of the run definition are processed in order.
After the data has been successfully loaded into the R/3 System, it can be checked here.
Result
You have transferred the data into the relevant R/3 application and checked it here.
Data Transfer
Purpose
During data transfer, data is transferred from an external system into the SAP R/3 System. You can use data transfer when you:
     Transfer data from an external system into an R/3 System as it is installed.
     Transfer data regularly from an external system into an R/3 System. Example: If data for some departments in your company is input using a system other than the R/3 System, you can still integrate this data in the R/3 System. To do this, you export the data from the external system and use a data transfer method to import it into the R/3 System.
Implementation considerations
Before creating your own data transfer program, you should use the Data Transfer Workbench to find the data transfer programs that are delivered by SAP.
Integration
SAP applications support the data transfer of numerous SAP business objects. The data transfer program specifies the data format definition that is necessary to import the data into the R/3 System. Adapt your conversion program for exporting the data from the external system to this definition.
Once the data has been exported, you can import it into your system using a generated data transfer program.
Features
     Data transfer from other, external systems
     Generation of data transfer programs
     Generation of function modules that can be used as an interface to the R/3 System
Data Transfer Methods
You can use the following methods to transfer data:
     Direct input: With direct input, the SAP function modules execute the consistency checks. However with batch input, these consistency checks are executed with the help of the screens. This means that direct input has considerable performance advantages.
     CALL TRANSACTION: Data consistency check with the help of screen logic.
     Batch input with batch input sessions : Data consistency check with the help of screen logic.
Difference between Batch Input and CALL TRANSACTION
If the direct input cannot be used for your task, this makes creating a data transfer program easier since the underlying transactions ensure that the data consistency checks are executed.
In the case of an error during the data transfer (if data records are inconsistent, for example), you can restart the transfer at the point in the program where the error occurred.
Batch input methods
With the batch input method, an ABAP program reads the external data that is to be entered in the R/3 System and stores the data in a "batch input session". The session records the actions that are required to transfer data into the system using normal SAP transactions.
When the program has generated the session, you can run the session to execute the SAP transactions in it. You can explicitly start and monitor a session with the batch input management function (by choosing System  Services  Batch input), or have the session run in the background processing system.
CALL TRANSACTION methods
In the second method, your program uses the ABAP statement CALL TRANSACTION USING to run an SAP transaction. External data does not have to be deposited in a session for later processing. Instead, the entire batch input process takes place inline in your program.
The information in Choosing Data Transfer Methods will help you decide which is the best data transfer method.
Data Transfer: Overview of Batch Input
Prerequisites
Before beginning the initial data transfer, you should answer the following questions:
     Which business objects are to be transferred?
The business objects to be transferred depend on the business applications that you will be using. If you are using sales and distribution processing, for example, you must transfer the material masters as well as the sales documents from your legacy system.
     How are the business objects to be transferred?
The data can be transferred either manually or automatically, using an SAP data transfer program or using your own transfer program.
Process flow
During the initial data transfer, data from the external system is converted into a sequential data transfer file and then transferred into the R/3 System using an SAP data transfer program. The data transfer file is the prerequisite for successfully transferring data as it contains the data in a converted format that is suitable for the R/3 System.
1.     Check to see if an SAP data transfer program (direct input, batch input or CALL TRANSACTION) exists for this data using the Data Transfer Workbench. Refer to the notes for this transfer program.
If no SAP data transfer program exists, proceed as follows:
2.     Determine the SAP transactions that a user would use to enter data records.
3.     Record these transactions using the batch input recorder. Ensure that you have filled all of the relevant fields with data.
4.     Use this data to generate a data transfer program.
5.     Display the Data Transfer Workbench and create your own data transfer object.
6.     Now follow the steps for transferring data using the Data Transfer Workbench.
The Transaction Recorder
Use
You can use the transaction recorder to record a series of transactions and their screens.
Features
You can use the recording to create
     Data transfer programs that use batch input or CALL TRANSACTION
     Batch input sessions
     Test data
     Function modules.
The recording can be executed several times. The screens are run in exactly the same way as they were run during the recording.
You can edit recordings that you have already made using an editor.
Activities
1.     To display the batch input initial screen, choose System  Services  Batch input Edit.
2.     Choose Recording. The system now displays the initial screen of the batch input recorder.
3.     Make a recording of the relevant transactions.
4.     Generate one or several of the objects named above.
Special features
     F1 -, F4 - and self-programmed F1 - and F4 help ( PROCESS ON HELP-REQUEST , PROCESS ON VALUE-REQUEST ) are not recorded. The same applies to all commands in the System and Help menus.
     Error and warning dialogs are not recorded. This means that only the OK code field and the field contents that lead to successful further processing in the current screen.
     " COMMIT WORK " in a transaction flow indicates the successful end of the transaction as regards batch input. The recording also ends successfully.
     " LEAVE TO TRANSACTION " in the course of a transaction indicates that it is not suitable for batch input. The recording is terminated.
     In ScreenPainter screens, movements in the scrollbar are not recorded. Use the function keys F21-F24 for positioning.
Recording Transactions
The recording forms the basis of generating data transfer programs, sessions, test data and function modules.
Procedure
1.     Display the initial screen of the batch input recorder.
2.     Assign a name to your recording.
3.     Choose Create.
4.     On the subsequent dialog box, enter the transaction code that you want to record and choose Continue.
The system displays this transaction.
5.     Execute the transaction in the usual way.
6.     When you have finished processing the transaction, the system displays an overview of the transaction and your input.
Choose Get transaction if no errors occurred while the transaction was being recorded.
If you do not want to keep the last recording that you made, go to the next step.
7.     Choose Next transac. If you want to record an additional transaction. Then continue from point 4.
8.     Save your recording when you have finished.
Recording
Once you have recorded the transaction, you can process it again later.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and choose Execute.
4.     Choose one of the following processing modes:
A : Display all screens.
E : Display errors only. In the case of an error, the system displays the screen on which the error occurred. Once this error has been corrected, the system continues to process the recording until the next error occurs.
N : No display. The recording is not processed visibly.
5.     Choose the update mode:
A : Asynchronous update
S : Synchronous update
L : Local update
6.     You begin to process the recording when you choose Enter to exit the dialog box. When the recording is complete, the system displays a log that lists the name of the transaction, the system field SY-SUBRC and the system messages that were output.
Using the Recording Editor
The recording editor contains functions that you can use to edit your recordings.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and choose Change.
4.     The following functions are available on the overview that the system displays:
Delete transaction from the recording: This deletes the selected transaction.
Add a new transaction to the recording: The transaction is added at the end of the recording.
Editing: You can edit the current recording.
If you choose Editing, proceed as follows:
5.     The system displays an editor where you can add and delete individual lines. You can also change the contents of these lines.
6.     If these editor functions are insufficient for your requirements, you can choose Export to download the recording onto your presentation host and use a PC editor to edit it there.
7.     Choose Import to import this file back into the R/3 System. Ensure that the file is still in the correct format.
8.     Choose Check to ensure that the edited version of the recording is still syntactically correct.
9.     Save your changes to the recording when you have finished editing it.
Generating Batch Input Sessions From the Recording
The data from the recording is transferred into batch input sessions that you can process for test purposes using the usual mechanisms.
Prerequisites
Before you can generate a batch input session, you must record the transactions through which the data is to enter the R/3 System. You use the batch input recorder to do this.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and then choose Generate session.
4.     Enter a session name, a user with whose authorizations the session is to be processed, the identification whether the session is to be deleted once it has been processed and the processing date.
5.     Choose Continue to exit the dialog box.
You have generated a batch input session that uses the same data for the input fields that you entered when you created the recording. You can now process this as usual.
Generating Data Transfer Programs
Prerequisites
Before you can generate a data transfer program, you must record the transactions using which the data is imported into the R/3 System. You use the batch input recorder to do this.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and choose Create program.
4.     On the following screen, specify a program name.
5.     You can also choose how the maintained field contents of the recorded screens are to be filled:
Transfer the values that were used during the recording. If you require a flexible data transfer, you must modify this program.
Set the parameters of the input values to be maintained and import these values from a data file. To set the parameters, the system creates a data structure and imports the data records from an external file into this data structure. The program assumes that the external file has been adapted to this data structure.
6.     If you have decided to set parameters for the input values to be maintained, it is useful if you create a test file when you generate the program. To do this, flag the checkbox and enter a name for the test file. For more information, see creating a test file.
7.     Choose Continue.
8.     The system displays the attribute screen of the program editor. Choose the relevant attributes here and save the program.
Result
You have now generated a data transfer program that you can use to import data into the R/3 System. The program can execute the data transfer using batch input or CALL TRANSACTION .
Generating Function Modules
Prerequisites
Before you can generate a data transfer program, you must record the transactions using which the data is imported into the R/3 System. You use the batch input recorder to do this.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and choose Create function module.
4.     On the subsequent dialog box, enter a function module name, a function group and a short text for the function module. Exit the dialog box by choosing Continue.
The system automatically creates the function module.
Result
You have now generated a function module that you can use as an interface for your R/3 System. As well as information relevant for the data transfer, the function module's import interface has a parameter for each input field of the transaction recorded.
Using Function Modules
Prerequisites
The function module was generated from a recording made using the batch input recorder.
Procedure
1.     Cal the function module.
2.     Supply the generic interface of the function module:
CTU : Flag whether the data is to be transferred using batch input method CALL TRANSACTION USING . The system generates a batch input session if this flag is not set.
MODE : Processing mode:
A     Display all
E     Display only errors
N     No display
UPDATE : Update mode:
S     Synchronous
A     Asynchronous
L     Local update
GROUP : (If CTU is already specified): Name of the batch input session to be generated
USER : (If CTU is already specified): User with whose authorizations the session is to be processed
KEEP : Specifies whether this session is to be deleted once it has been processed
HOLDDATE : Specifies the earliest processing date for the error session
NODATA : Defines the NODATA character
3.     Supply the function module's special interface.
For each input field that was filled when you recorded the transactions, the system creates an import parameter. The recorded value is used as the default value for this import parameter.
Creating Test Files
To test the data transfer program that you have created, you can create a data record in a sequential file. This data record contains all the field contents from the recording that are relevant to the data transfer in the format required by the data transfer program. It is therefore useful if you align the format of your conversion program data file with the format of the test file.
Prerequisites
Before you can generate a data transfer program, you must record the transactions using which the data is imported into the R/3 System. You use the batch input recorder to do this.
Procedure
1.     Display the initial screen of the batch input recorder (Transaction SHDB).
2.     Choose Overview.
The system displays an overview of all recordings.
3.     Position the cursor on the relevant recording and choose Create test data.
4.     Enter a test file and exit the dialog box by choosing Continue.
You have now created a test file.
If the test file you have specified already exists, the system appends the new data record.
If you do not specify the path, the system archives the test file in the working directory of the current application server.
Executing the Data Transfer
Purpose
You generally use the Data Transfer Workbench to execute the data transfer. The following section describes how you transfer data directly using the batch input method.
Prerequisites
You require a data transfer program. This may be an SAP data transfer program, or you can create your own program.
Process flow
1.     Provide the data to be imported in a data file. Ensure that the data is in the correct format.
2.     If you are using a generated data transfer program, you can choose a data transfer method.
If you are only dealing with one data record, you can import this directly using a generated function module.
3.     Execute the data transfer program.
4.     Analyze the program and correct any errors that occur.
Writing Data Conversion Programs
The data conversion program is responsible for the following tasks:
     Converting the data that is to be transferred into the R/3 System as required by the SAP data structure or transactions that you are using.
If you are using an SAP batch input standard program, you must generate the data structure from the SAP standard data structure (see generating an SAP data structure).
If you develop your own batch input program, the data structure is determined by the R/3 System when the program is generated. Generate a test file from the recording and align the format of your conversion program with the format of the test file.
A conversion may be necessary for data type and length data type and length. The data type required by all standard SAP batch input programs is C, character data. You can find the required field lengths either in your analysis of the data declaration structure of the generated batch input program or in the data structures that you generate.
     The data is exported in SAP format to a sequential file. The batch input program in the R/3 System reads the data in from this file.
Process flow
The tasks involved in writing a data transfer program are shown in the diagram and list below.
Writing Data Conversion Programs
The data conversion program is responsible for the following tasks:
     Converting the data that is to be transferred into the R/3 System as required by the SAP data structure or transactions that you are using.
If you are using an SAP batch input standard program, you must generate the data structure from the SAP standard data structure (see generating an SAP data structure).
If you develop your own batch input program, the data structure is determined by the R/3 System when the program is generated. Generate a test file from the recording and align the format of your conversion program with the format of the test file.
A conversion may be necessary for data type and length data type and length. The data type required by all standard SAP batch input programs is C, character data. You can find the required field lengths either in your analysis of the data declaration structure of the generated batch input program or in the data structures that you generate.
     The data is exported in SAP format to a sequential file. The batch input program in the R/3 System reads the data in from this file.
Process flow
The tasks involved in writing a data transfer program are shown in the diagram and list below.
Selecting a Data Transfer Method
When you transfer data in ABAP, you have three options to submit the data for the data transfer. Only the first two methods can be recommended without reservation. The third method, by way of CALL DIALOG, is outmoded. CALL DIALOG is less comfortable than the other methods. You should use it only if you must.
     Use the CALL TRANSACTION USING statement
Summary: With CALL TRANSACTION USING, the system processes the data more quickly than with batch input sessions. Unlike batch input sessions, CALL TRANSACTION USING does not automatically support interactive correction or logging functions.
Your program prepares the data and then calls the corresponding transaction that is then processed immediately.
The most important features of CALL TRANSACTION USING are:
o     Synchronous processing
o     Transfer of data from an individual transaction each time the statement CALL TRANSACTION USING is called
o     You can update the database both synchronously and asynchronously
The program specifies the update type
o     Separate LUW (logical units of work) for the transaction
The system executes a database commit immediately before and after the CALL TRANSACTION USING statement
o     No batch input processing log
     Create a session on the batch input queue.
Summary: Offers management of sessions, support for playing back and correcting sessions that contain errors, and detailed logging.
Your program prepares the data and stores it in a batch input session. A session is a collection of transaction data for one or more transactions. Batch input sessions are maintained by the system in the batch input queue. You can process batch input sessions in the background processing system.
Your program must open a session in the queue before transferring data to it, and must close it again afterwards. All of these operations are performed by making function module calls from the ABAP program.
The most important aspects of the session interface are:
o     Asynchronous processing
o     Transfers data for multiple transactions
o     Synchronous database update
During processing, no transaction is started until the previous transaction has been written to the database.
o     A batch input processing log is generated for each session
o     Sessions cannot be generated in parallel
The batch input program must not open a session until it has closed the preceding session.
     Use the CALL DIALOG statement
Summary: Not recommended if you can enter data by way of sessions or CALL TRANSACTION USING.
Your program prepares data for a sequence of dialog screens, and calls a dialog module for immediate processing.
The most important aspects of the CALL DIALOG interface are:
o     Synchronous processing
o     Transfers data for a sequence of dialog screens
o     No separate database update for the dialog
A database update occurs only when the calling program executes a commit operation.
o     Shares LUW with calling program
o     No batch input processing log is generated
Executing Data Transfer Programs
Procedure
If you are using an SAP data transfer program, follow the procedure specified in the program documentation.
If you are using a generated data transfer program, proceed as follows:
1.     Start the data transfer program.
2.     Decide which batch input method you want to use for the data transfer.
a) CALL TRANSACTION USING:
You must specify the:
Processing mode: You use this parameter to specify whether processing should take place in the background or in dialog mode.
Possible values are:
A     Display all
E     Display only errors
N     No display
Update mode: This parameter determines how the data is to be updated:
Possible values are:
S     Synchronous
A     Asynchronous
L     Local update
Error session: Here you have the option to specify a session name for a batch input session in which data is to be written in the case of an error. You can use this to identify incorrect data records after the batch input program has run and to import the records into the R/3 System once you have corrected them.
If you are creating an error session, you must also specify:
User: Specify the user with whose authorizations the sessions are processed.
Keep session: This specifies whether or not the session should be deleted once it has been processed.
Lock date: Specify the processing date for the error session.
b) Generate session:
Session name: Specify a name for the batch input session to be generated.
User: Specify the user with whose authorizations the sessions are processed.
Keep session: This specifies whether or not the session should be deleted once it has been processed.
Lock date: Specify the processing date for the error session.
3.     Specify a character that is to be used as the NODATA character.
4.     Specify the path of the data file from which the data is to be imported into the R/3 System.
5.     Execute the program.
6.     If you have generated a session, or if errors occurred in CALL sTRANSACTION USING mode, you must now edit the generated sessions. You can find information on this in BC - System services in batch input sessions.
Batch Input Authorizations
You do not need special authorization - other than the ABAP run time authorization (authorization object S_PROGRAM - to run a program that creates batch input. Any user can create batch input sessions.
Starting processing for a session once it is in the queue is another matter, however. You can find more information on this in batch input sessions.
Creating a Session with BDC_OPEN_GROUP
Use the BDC_OPEN_GROUP function module to create a new session. Once you have created a session, then you can insert batch input data into it with BDC_INSERT.
You cannot re-open a session that already exists and has been closed. If you call BDC_OPEN_GROUP with the name of an existing session, then an additional session with the same name is created.
A batch input program may have only one session open at a time. Before opening a session, make sure that any sessions that the program closes any sessions that it previously had opened.
BDC_OPEN_GROUP takes the following EXPORTING parameters:
     CLIENT
Client in which the session is to be processed.
Default: If you don't provide a value for this parameter, the default is the client under which the batch input program runs when the session is created.
     GROUP
Name of the session that is to be created. May be up to 12 characters long.
Default: None. You must specify a session name.
     HOLDDATE
Lock date. The session is locked and may not be processed until after the date that you specify. Only a system administrator with the LOCK authorization for the authorization object Batch Input Authorizations can unlock and run a session before this date.
Format: YYYYMMDD (8 digits).
Default: No lock date, session can be processed immediately. A lock date is optional.
     KEEP
Retain session after successful processing. Set this option to the value X to have a session kept after it has been successfully processed. A session that is kept remains in the input/output queue until an administrator deletes it.
Sessions that contain errors in transactions are kept even if KEEP is not set.
Default: If not set, then sessions that are successfully processed are deleted. Only the batch input log is kept.
     USER
Authorizations user for background processing. This is the user name that is used for checking authorizations if a session is started in background processing. The user must be authorized for all of the transactions and functions that are to be executed in a session. Otherwise, transactions will be terminated with "no authorization" errors.
The user can be of type dialog or background. Dialog users are normal interactive users in the R/3 System. Background users are user master records that are specially defined for providing authorizations for background processing jobs.
Adding Data to a Session: BDC_INSERT
Use the BDC_INSERT function module to add a transaction to a batch input session. You specify the transaction that is to be started in the call to BDC_INSERT. You must provide a BDCDATA structure that contains all of the data required to process the transaction completely.
BDC_INSERT takes the following parameters:
     TCODE
The code of the transaction that is to be run.
     POST_LOCAL
Parameter to update data locally. If POST_LOCAL = X, data will be updated locally.
(refer to the keyword documentation of SET UPDATE TASK LOCAL for more information)
     DYNPROTAB
The BDCDATA structure that contains the data that is to be processed by the transaction.
DYNPROTAB is a table parameter in the function module.
Closing a Session: BDC_CLOSE_GROUP
Use the BDC_CLOSE_GROUP function module to close a session after you have inserted all of your batch input data into it. Once a session is closed, it can be processed.
Function Module BDC_CLOSE_GROUP
Exception parameters
Parameter     Function
NOT_OPEN     Client
QUEUE_ERROR     Internal use
BDC_CLOSE_GROUP needs no parameters. It automatically closes the session that is currently open in your program.
You must close a session before you can open another session from the same program.
You cannot re-open a session once it has been closed. A new call to BDC_OPEN_GROUP with the same session name creates a new session with the same name.
Processing Batch Input Sessions
When you create a batch input session, it remains in the batch input queue until it is explicitly started. Session processing can be started in two ways:
     An on-line user can start the session using the batch input menu options. (To access the batch input options, choose System  Services  Batch Input.)
     You can submit the background job RSBDCSUB to start a session in background processing. If several sessions have the same name, RSBDCSUB starts them all.
Its possible to coordinate the generation and execution of a session in the background processing system.
You can, for example, schedule both the batch input program and RSBDCSUB in the background. If you designate the batch input job as the predecessor for RSBDCSUB, then RSBDCSUB will be started automatically when the batch input job successfully completes.
Alternatively, you can schedule both the batch input program and RSBDCSUB as job steps in a single background job. In this case, however, RSBDCSUB is started even if the batch input program should terminate abnormally.
For detailed information about processing batch input sessions, see Managing Batch Input Sessions in the System Services guide.
Frequent Data Transfer Errors
The most frequent errors include:
     The BDCDATA structure contains screens in incorrect sequence.
     The BDCDATA structure assigns a value to a field that does not exist on the current screen.
     The BDCDATA structure contains a field that exceeds the specified length.
General guidelines
You should be aware of the following guidelines when you create sessions and call transactions or dialogs:
     You must provide data for all required fields on a screen.
     You can only specify the initial data for a screen. The system does not accept input as a response to a warning or an error message.
     If there is more than one possible screen sequence for a transaction or dialog, your program specifies the screen sequence for the transaction. You must transfer all screens that the dialog user sees to the selected screen sequence. This applies even if the screen itself is not used to input data.
Direct Input
To enhance the batch input procedure, the system offers the direct input technique, especially for transferring large amounts of data. In contrast to batch input, this technique does not create sessions, but stores the data directly. It does not process screens. To enter the data into the corresponding database tables directly, the system calls a number of function modules that execute any necessary checks. In case of errors, the direct input technique provides a restart mechanism. However, to be able to activate the restart mechanism, direct input programs must be executed in the background only. To maintain and start these programs, use program RBMVSHOW or Transaction BMV0.
Examples for direct input programs are:
Program     Application
RFBIBL00     FI
RMDATIND     MM
RVAFSS00     SD
RAALTD11     AM
RKEVEXT0     CO-PA
Pls reward points.
Regards,
Ameet

Cannot delete old sessions from SM35 - Batch Input...

Cannot delete old sessions from SM35 - Batch Input...
We have an issue, we are trying to delete old batch input sessions via SM35 and no
matter how hard we try we cannot get rid of them. They are still in status "In Process" but they are status incorrect.
Those sessions have long finished and some are more than 5 years old.
We have tried running rsdbcreo and RSBDC_REORG but it only returns with
Temse Error, running SP12 does not list any inconsistencies. Basically we want all jobs in SM35 that ran this year only available in the SM35 queue, we have sessions that have run from year 2004 to 2008 we wish to
delete.
Anybody experience anything similar or have any advice, sorry this is an environment that i have inherited and wish to cleanup.
We have checked the following notes 706478,76422,706478,76422 and many more.
Thanks
Suleman

When you try to delete, you will be asked whether you want to delete logs too.
Here try with 'No'.
hope this helps

Incoming IDOC Error "No batch input data from the screen SAPMV45A 4001"

Hello ,
The Incoming IDOC with Message type 'ORDERS' is triggering the error message "No batch input data from the screen SAPMV45A 4001" with message no 00344 . There is an SAP note 785000 to handle this type of error message which has been already implemented. Still we are encountering few IDOC error's at the time of sales order creation. The IDOC reaches status 51 throwing the error which is again reprocessed through BD87 .
We are unable to replicate the similar scenerio in Development & Testing systems as it works fine.
Can any one kindly advise how to eliminate the error "No batch input data from the screen SAPMV45A 4001" message at the time of Incoming IDOC processing.
Thanks in advance.
Best Regards
Sateesh

Dear Sateesh
Check this link where the same topic was discussed
[ VA01/VA02: batch-input error in IDoc processing|http://www.sapfans.com/forums/viewtopic.php?f=21&t=313032]
thanks
G. Lakshmipathi

Experience with using BAPI_HRMASTER_SAVE_REPL_MULT from batch input?

Forum Experts,
We have a scenario where we need to update HR Infotype tables in ECC 6.0 using batch data from an HR legacy system as a source. This will be a daily process, with expected volumes between 1000 and 5000 adds and/or changes. Does anyone have experience using BAPI_HRMASTER_SAVE_REPL_MULT in this type of scenario? Especially interested in the areas of performance (run-time) and consistency (problems).
Thanks,
Allen

For updating the IT 1011, we have 6 fields in the BAPI.
But when I go to PP01, i have only one field in input mode, rest all are disabled for input.
Even if I fill the values in all the fields, only one is considered for update, and rest all are recalculated using this.
Can someone please let me know how we can decide this.
Thanks,
Surya

General task list: component selection from BOM - possible in batch input?

Hi experts,
for the assignment of non-stock material to general task lists I have followed the advice from message[6115684|Re: General Task List Components;.
So what I have done is:
- Include non-stock material in BOM
- Assign BOM to general task list header
When clicking on the "Component selection" button in the task list components, I can select a component.
When entering the material number of the component directly though, I get an error: "Material type X and line item type L not compatible" (CO135).
I would like to upload the general task lists with a batch input recording, but I can't figure out how to select components.
Any thoughts?
Kind regards,
Andreas

Hello,
We have the same requirement to load tasklists (change & create). We are using the function modules EAM_TASKLIST_CREATE and EAM_TASKLIST_CHANGE. However, i cannot get a non-stock BOM item to process. Has anyone got this working?
Thanks,
Clay.
EDIT: Found the answer - simply fill in the fields for BOM on the component (STLTY, STLNR, STLKN, and STLAL).
Message was edited by: Clayton Mergen

Batch input session for 'MB1C' is different from TC 'MB1C'

hi all,
I processed my bdc in sm35 in 'process/foreground' mode , and I find the screen is different from front-end screen. what's wrong? In 'SHDB', I already click the 'not a batch input session' checkbox.

Hi Liang,
Please check whether you are processing the bdc session for the same transaction 'MB1C' or is it session created for some other transaction. I don't think there can be separate screens for the same.
Regards,
Chetan.
PS:Reward points if this is helpful.

Batch input session from F.05 has an 'in processing' status

Hello all,
We would like to ask for advice regarding an issue that we are facing right now. We ran F.05 on 9/30/2008. This transaction should create a batch input
session and post revaluation at the end of the month and eventually
reverse them at the beginning of the next month. Unfortunately, as of
the date of the run, period 10 was not yet open. So, the results are
the following:
The batch input created, until now, has an 'in processing' status. 70
transactions were supposed to be processed (but not sure if this is
already the total or it still has some more to process -since we do not
have a record of the supposed number of postings). Now, period 10 is
already open and we are trying to reprocess the session, but it can't
be because of its status.
Looking at the transactions: total is 70 (but not sure if there are
still more to be processed supposedly). 35 transactions (pertaining to
the revaluation postings at the end of the month) have been processed and
their revaluation documents were already produced. 35 transactions (pertaining to the
supposed reversal on the first day of October) are in error because
period 10 was not yet open as of run date. No logs have been created (blank).
In the meantime, can we post manual reversals in October for the revaluation postings made in September? Is there a possibility that there are still revaluations to be processed for September? Let's say, instead of only 35, there are still more? Or another option: could we manually reverse the revaluation postings on September 30 and post on the same date, delete the batch input session (can it be deleted despite the status?), then run the revaluation transaction again for September?
Thanks in advance for your advice.
Regards,
Peter

Hi Peter,
Go to SM35 > Select the session in process > Release session (Shift + F4)
Now select the session again from "Overview" and process again in order to process the remaining documents. Ensure the period is opened.
This should resolve the issue. Let me know how it goes.
Rgds
Nadini

Error in generating Batch Input session from FF67 Transn

Hi Folks,
I have tried to create the batch input session from transaction FF67 (Process manual bank statement ) using the menu path settings-->specifications and chosen the option 2 for Processing type, after posting the statement manually, batch is not getting created, is there any settings to be configured apart from this, any help would be highly rewarded.
Thanks in Adv.
Rgds,

Hi Dudes,
Any hint on this issue would be highly helpful ,
Thanks in Advance,
Rgds,

Batch input from sproxy

Similar Messages

Maybe you are looking for