Batch input FV50

hi guru!!!
you know if exist a standard program for a batch input for a transaction cod fv50? (like a rfbibl00 for a tc fb01)
thank u!
Valerio

Hi Paul,
You cannot process FV50 in a BDC because it is an Enjoy transaction. You should use the "old" standard transaction instead. Since you were trying to use FV50 "Park G/L account document" then you probably want to create a BDC recording using transaction F-65 instead. This transaction corresponds to the menu path: Accounting -> Financial accounting -> General ledger -> Document entry -> Others -> General document parking.
Regards,
James

Similar Messages

FV50 - Parking not possible during batch input

Dear SDN,
our client has a custom program for GL Document batch input through TCode FV50.
Though the answer should not be, the question here is very straightforward: why, in this program, the mentioned error occurs for some users, but not for others, giving ALL the input parameters are the same???
1 - Batch input runs
2 - FV50 is displayed
3 - (Menu) Document -> Park
4 - Error: FP140 - Msg: "Parking not possible during batch input"
Note: User who gets the error has ALL the authorizations that users who don't get the error have.
Any suggestion is highly appreciated.
Regards,
Fabio

This message is triggered in SAPMF05A program - MF05AFB0_BELEG_PARKEN include.
keep a breakpoint at this line and check in debug mode.
Also since you are using a custom program to call FV50 transaction,
check if CTU_PARAMS structure is used and try using NOBINPT = 'X' option.
if sy-binpt ne space.
    call function 'CUSTOMIZED_MESSAGE'
      exporting
        i_arbgb = 'FP'
        i_dtype = 'E'
        i_msgnr = '140'.
    if 1 = 2.
      message e140(fp).
    endif.
endif.

Batch input of a list of values

Hello,
I have to make a batch input of a list.
The screen of the transaction contains a list with 9 lines, if i enter a value in one, another line is added to the list.
I did record this transaction and have an incremented list in the generated program that looks like this :
it begins whith ADRPCIT-POST_CODE(01) and increments till 09
perform bdc_dynpro      using 'SAPLSZRL' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                              'ADRPCDCITY-POST_CODE(08)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'ADRPCDCITY-POST_CODE(08)'
                              record-POST_CODE_08_017.
perform bdc_dynpro      using 'SAPLSZRL' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                              'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'ADRPCDCITY-POST_CODE(09)'
                              record-POST_CODE_09_018.
perform bdc_dynpro      using 'SAPLSZRL' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                              'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLSZRL' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                              'ADRPCDCITY-POST_CODE(07)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'ADRPCDCITY-POST_CODE(07)'
                              record-POST_CODE_07_019.
perform bdc_dynpro      using 'SAPLSZRL' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                              'ADRPCDCITY-POST_CODE(08)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'ADRPCDCITY-POST_CODE(08)'
                              record-POST_CODE_08_020.
perform bdc_dynpro      using 'SAPLSZRL' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                              'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'ADRPCDCITY-POST_CODE(09)'
                              record-POST_CODE_09_021.
perform bdc_dynpro      using 'SAPLSZRL' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                              'ADRPCDCITY-POST_CODE(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
What i did is setting the value of the incremented number to 09 if it's greater than 09 but i'm not sure it's the right way to do it cause i get only 9 records
My code :
LOOP AT gt_record ASSIGNING <fs_record>.
    IF sy-tabix > 9.
      ligne = 9.
    ELSE.
      ligne = sy-tabix.
    ENDIF.
    IF ligne > 1.
      IF city_mem EQ <fs_record>-city_code_001.
        flag_end = 'X'.
      ELSE.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=SAVE'.
        PERFORM bdc_transaction USING 'SR10'.
        CLEAR flag_end.
      ENDIF.
    ENDIF.
    city_mem = <fs_record>-city_code_001.
    IF flag_end NE 'X'. "premier passage
      PERFORM bdc_dynpro      USING 'SAPLSZRC' '0100'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'ADRCITYD-CITY_CODE'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING 'ADRCITYD-CITY_CODE'
                                    <fs_record>-city_code_001.
      PERFORM bdc_field       USING 'ADRCITYD-COUNTRY'
                                    'FR'.
      PERFORM bdc_field       USING 'ADRCITYD-LANGU'
                                    'F'.
      PERFORM bdc_dynpro      USING 'SAPLSZRC' '0200'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'ADRCITYD-COMMU_CODE'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM bdc_field       USING 'ADRCITYD-FLAG_STRTS'
                                    'X'.
      PERFORM bdc_field       USING 'ADRCITYD-CITY_NAME'
                                    <fs_record>-city_name_005.
      PERFORM bdc_field       USING 'ADRCITYD-REGION'
                                    <fs_record>-region_006.
      PERFORM bdc_field       USING 'ADRCITYD-TIME_ZONE'
                                    'CET'.
      PERFORM bdc_field       USING 'ADRCITYD-COMMU_CODE'
                                    <fs_record>-commu_code_008.
      PERFORM bdc_field       USING 'ADRCITYD-DEF_LANGU'
                                     'F'.
      PERFORM bdc_dynpro      USING 'SAPLSZRC' '0200'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'ADRCITYD-CITY_NAME'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=PSTC'.
      PERFORM bdc_field       USING 'ADRCITYD-FLAG_STRTS'
                                    'X'.
      PERFORM bdc_field       USING 'ADRCITYD-CITY_NAME'
                                    <fs_record>-city_name_005.
      PERFORM bdc_field       USING 'ADRCITYD-REGION'
                                    <fs_record>-region_006.
      PERFORM bdc_field       USING 'ADRCITYD-TIME_ZONE'
                                    'CET'.
      PERFORM bdc_field       USING 'ADRCITYD-COMMU_CODE'
                                    <fs_record>-commu_code_008.
      PERFORM bdc_field       USING 'ADRCITYD-DEF_LANGU'
                                    'F'.
*      PERFORM bdc_dynpro      USING 'SAPLSZRL' '0400'.
    ENDIF.
    PERFORM bdc_dynpro      USING 'SAPLSZRL' '0400'.        "ajout2
    lignec = ligne.
    CONCATENATE 'ADRPCDCITY-POST_CODE(' lignec ')' INTO cp.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  cp.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING cp
                                  <fs_record>-post_code_01_016.
ENDLOOP.
* deniere sauvegarde
PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SAVE'.
PERFORM bdc_transaction USING 'SR10'.
CLEAR flag_end.
PERFORM close_group.
PERFORM close_dataset USING dataset.
Can somebody help me on this one ?
Thank you,
Tom.

If it is table control you may have to pass PageDown after 9 rec & again start with (01)
record number remains 1 to 9 but Top_line parameter will change to 9or10 after 1 pagedown.
Cxould be P++
you can record Pagedown & check recording.

Manual bank statement: no batch input was generated

Hi,
maybe somebody has a clue with this problem regarding FF67: after the data processing, no batch input is generated in order to post the bank statement.
Please, I need your help with an OSS note or with a posting solution without batch input ( I tried to process the bank statement with "processing type = 4", but it didn't work).

Hi Andrea,
Try to add value in <i>Session name for bank postings</i>
Do not hesitate to ask for further clarifications. Award points if useful.
Regards,
Siva

Batch input session is not generating In BRS

Hello,
I am uploading bank statement through ZFF67 program manual bank statement, after entering all the line items in the file, batch input session is not generating in SM35.
Please give advice.
Thanks,
Ratnam

Hi,
Go to environment - specification- here you need to maintain settings for batch input processing in T.code FF67.
I am not exactly remembering the menu option name. The sub option name is Specification, these settings you need to change with your user id.
Check and revert back still the same problem exists.
Regards,
Sankar

Is it possible to maintain a view vai Batch Input

Hi guys,
The user required to develop a BDC program to upload the data source from outside of SAP, and maintain these data into a view via Tcode: SM34. But it seems the view doesn't support Batch input.....
Can anybody tell me, is it possible to maintain a view via Batch input? Many thanks!
Brian Liu

Additional information:
This requirement is to upload the Overhead Rate data from outside of SAP, and maintained via KZM2 or SM34. But when I tried to record a BDC for KZM2, it seems that the SAP can not support batch input.
I find a SAP note 208474, it says:
Symptom
Overhead rates of the costing sheet of the overhead rates, which have been created, changed or deleted via batch input or Call Transaction, are not saved.
The same rates are saved if processing is carried out via Transaction KZZ2 or the Implementation Guide IMG.
Cause and prerequisites
Processing the Customizing transactions for maintaining the overhead rates of the costing sheet (Transaction KZZ2, KZM2) is
not supported in the batch input. This corresponds to the SAP standards according to which Customizing transactions in general need not necessarily be capable of batch input.
The batch input data of the overhead rates are not saved in the standard because processing is terminated by a COMMIT WORK. This statement ensures that the internal tables for the transport of the overhead rates are only deleted if their transfer to the database tables to be transported has been processed successfully.
Solution
The subsequent modification allows batch input processing of the overhead rates, by suppressing the COMMIT WORK statement. As a result of the modification, the tables in the transport request of the overhead rates may be incomplete in single cases.
In cases where the overhead rates have not been transferred completely to the target system after implementation of the modification, include the overhead rates again in a transport request, repeat the transport and, if necessary, subsequent processing.
Note that the attached modifications are not and will not be included in the R/3 standard system.
I modified the sap standard program L0COEF04 according to another SAP note 150041, but after the modification, I still couldn't record the BDC.
Anybody who have ever met the same situation, or can give me some suggestion? With many thanks!
Brian Liu

How to check whether a batch input session is completed in ABAP program

I have created a ABAP program to create a batch input session (reference to RSBDCSUB). After the creation of the batch input session, I kick it to start and read the execution log. However, sometimes I cannot read anything from the execution log as the execution of the batch input is a synchronized process to the execution of my program, i.e. at the time being that I try to read the log of a particular transaction, that transaction is being processing / haven't start processing.
How can I check whether a batch input session is completed in the program?
The code that corresponding to the triggering of batch input session:
SUBMIT (SUBREPORT)
   USER MTAB-USERID
   VIA JOB MTAB-GROUPID
   NUMBER JNUMB
   WITH QUEUE_ID EQ MTAB-QID
   WITH MAPPE     EQ MTAB-GROUPID
   WITH MODUS     EQ 'N'
   WITH LOGALL    EQ LMODUS
Or is there any method to wait here until the process is completed before further processing?

Hi gundam,
1. Or is there any method to wait here until the process is completed before further processing?
There is no such direct method to wait.
2. Immediately after submitting in background,
   we cannot wait
neither can we LOOP and go on detecting
whether the b/g process has completed or not !
3. To over come such problems,
we have to use another technique.
4. we have to submit another
   job which will get triggered
   on event SAP_END_OF_JOB
   ie. when the original job will finish,
our new job will AUTOMATICALLY get triggered,
5. This new job / program
   will do the FURTHER actions !
regards,
amit m.

Batch input for IQ02 not accepting "yes" for 'POPUP_TO_CONFIRM'

Hello,
I wrote a batch input for a transaction (IQ02) and all works fine except one thing:
-when all data is entered and SAVE button is pressed, there is an additional pop-up, from an user exit which needs an YES/NO answer.
The function module used to display the popup is: 'POPUP_TO_CONFIRM'
I do not manage to press the YES button. This is the data I receive when pressing F1 on YES button:
Program SAPLSPO1
Function OPT1
Normally, in batch input, this is the way I pass user-commands:
PERFORM bdc_dynpro USING 'SAPMIEQ0' '0101'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
But it's not working for this particular situation.
Any ideas?
Thank you.
Edited by: Julius Bussche on Jan 5, 2009 2:07 PM
Quality of subject title improved.

Hi
Find out under which condition popups appears.
for that condition you have to put the following code
PERFORM bdc_dynpro USING 'SAPLSPO1' ''<SCREEN_NUMBER>'.
PERFORM bdc_field USING 'BDC_OKCODE' '=OPT1' .
Hope this helps,
Rajat

Error while creating a product group--Batch input error 9

Hi,
While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
Thks,
Nilesh

Hi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh

BDC programming using Batch input Session.

Hello Experts.
I'm an ABAP beginner. I've benn practicing BDC programming using Batch input Session
at the moment.
This is the program that upload Local file which has plural records, and put the records into a Session.
These are the records.
413459,KIM EI HWAN121                ,19810607,MIADONG1234
423459,KIM EI HWAN122                ,19810607,MIADONG1235
433459,KIM EI HWAN123                ,19810607,MIADONG1236
443459,KIM EI HWAN124                ,19810607,MIADONG1237
453459,KIM EI HWAN125                ,19810607,MIADONG1238
463459,KIM EI HWAN126                ,19810607,MIADONG1239
I succeeded making Session.
However, for some reaseon, every record in the Session has got the same, value which is the first record.
Why is this happening? And How can I correct the code below?
REPORT ZBCUSER002_BATCH NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZBATCH.
= Types definition ===================================================
TYPES: BEGIN OF TYP_LOCAL,               "For Local file upload
         RECORD(200) TYPE C,
       END   OF TYP_LOCAL.
= Internal table definition ==============================================
DATA: BEGIN OF BDC_TAB OCCURS 0.        "BDCDATA itab
        INCLUDE STRUCTURE BDCDATA.
DATA: END   OF BDC_TAB.
DATA: BEGIN OF MESSAGE_BDC OCCURS 0.    "Message itab
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END   OF MESSAGE_BDC.
DATA: TBL_LOCAL TYPE STANDARD TABLE OF TYP_LOCAL, "Local file itab
      F_TBL     TYPE FILETABLE.                    "FILETABLE fot local
= Structure table definition =========================================
DATA: STR_F_TBL LIKE LINE OF F_TBL,                "FILETABLE structure
      STR_LOCAL TYPE TYP_LOCAL.                    "Local file structure
= Variable definition ================================================
DATA: LV_RC     TYPE I,                            "Method parameter
      ENUMBER   TYPE ZT601-ENUMBER,                "Employee number
      NAME      TYPE ZT601-NAME,                   "Employee name
      BIRTH     TYPE ZT601-BIRTH,                           "Birthday
      HOMETOWN TYPE ZT601-HOMETOWN,                        "Hometown
      SYSVAL    TYPE SY-SUBRC.                     "System valuible
= Constants definition ===============================================
CONSTANTS: TBL_NAME(10) TYPE C VALUE 'ZT601'.      "Table name ZT601
= Parameters definition ==============================================
PARAMETERS: F_NAME      TYPE RLGRAP-FILENAME OBLIGATORY,    "File path
            EXECMODE(1) TYPE C.                    "Execute mode
INITIALIZATION
*----- Initialize all valuables, structures and internal tables
CLEAR: LV_RC,
       STR_F_TBL,
       STR_LOCAL,
       ENUMBER,
       NAME,
       BIRTH,
       HOMETOWN.
REFRESH: F_TBL,
         TBL_LOCAL.
AT SELECTION-SCREEN
*----- When the button next to Parameter 'F_NAME',
*----- File dialog open.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR F_NAME.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
    EXPORTING
      WINDOW_TITLE            = 'SELECT FILE'
      DEFAULT_FILENAME        = '*.TXT'
   CHANGING
     FILE_TABLE               = F_TBL
     RC                       = LV_RC
    EXCEPTIONS
      FILE_OPEN_DIALOG_FAILED = 1
      CNTL_ERROR              = 2
      OTHERS                  = 3
*----- system valiable check.
*----- If done properly,
*----- Put the path into the File path parameter
IF SY-SUBRC = 0.
    READ TABLE F_TBL INTO STR_F_TBL INDEX 1.
    F_NAME = STR_F_TBL.
*----- If not done properly, show message
*----- An error occured while getting file path then end program
ELSE.
    MESSAGE E000.
ENDIF.
*----- Execute code can only be A or N.
AT SELECTION-SCREEN ON EXECMODE.
IF EXECMODE <> 'A' AND EXECMODE <> 'N'.
    MESSAGE E001.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
*----- Upload Local file of file path parameter.
CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
            FILENAME                = F_NAME
            FILETYPE                = 'ASC'
       TABLES
            DATA_TAB                = TBL_LOCAL
       EXCEPTIONS
            FILE_OPEN_ERROR         = 1
            FILE_READ_ERROR         = 2
            NO_BATCH                = 3
            GUI_REFUSE_FILETRANSFER = 4
            INVALID_TYPE            = 5
            OTHERS                  = 6.
*----- System valiable check.
*----- If not done properly, show an error message
*----- An error occured while uploading local file then end program
IF SY-SUBRC <> 0.
    MESSAGE E002.
ENDIF.
PERFORM BDC_OPEN.
*----- Loop Internal table
LOOP AT TBL_LOCAL INTO STR_LOCAL.
*----- Spilt the file record and put them into each valiable.
    SPLIT STR_LOCAL AT ',' INTO ENUMBER
                                 NAME
                                 BIRTH
                                 HOMETOWN.
*----- Data check Function module
    CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
         EXPORTING
              DATE                      = BIRTH
         EXCEPTIONS
              PLAUSIBILITY_CHECK_FAILED = 1
              OTHERS                    = 2.
*----- When error occurs while checking date, show an error message.
*----- (&1) is not date
    IF SY-SUBRC <> 0.
      MESSAGE E003 WITH BIRTH.
    ENDIF.
*-- The first screen of SE11
*----- Screen number 0102 of program id SAPMSRD0
    PERFORM BDC_DYNPRO      USING 'SAPMSRD0' '0102'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RSRD1-TBMA_VAL'. "Field on Cursor
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=SHOW'.          "Display button
    PERFORM BDC_FIELD       USING 'RSRD1-TBMA'
                                  'X'.
    PERFORM BDC_FIELD       USING 'RSRD1-TBMA_VAL'
                                   TBL_NAME.                "ZT601
*-- Table definition screen
*----- Screen number 2000 of program id SAPLSD02
    PERFORM BDC_DYNPRO      USING 'SAPLSD02' '2000'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'DD02D-TABCLTEXT'. "Field on Cursor
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=TDED'.            "Create entry
    PERFORM BDC_FIELD       USING 'BDC_SUBSCR'
                                  'SAPLSD02'.
    PERFORM BDC_FIELD       USING 'BDC_SUBSCR'
                                  'SAPLSED5'.
*-- Data input screen
*----- Screen number 0101 of program /1BCDWB/DBZT601
    PERFORM BDC_DYNPRO      USING '/1BCDWB/DBZT601' '0101'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'ZT601-CRUSER'.    "Field on Cursor
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=SAVE'.                  "Save
    PERFORM BDC_FIELD       USING 'ZT601-MANDT'
                                  SY-MANDT.                 "Client
    PERFORM BDC_FIELD       USING 'ZT601-ENUMBER'
                                  ENUMBER.           "Employee number
    PERFORM BDC_FIELD       USING 'ZT601-NAME'
                                  NAME.              "Employee name
    PERFORM BDC_FIELD       USING 'ZT601-BIRTH'
                                  BIRTH.                    "Birthday
    PERFORM BDC_FIELD       USING 'ZT601-HOMETOWN'
                                  HOMETOWN.                 "Hometown
    PERFORM BDC_FIELD       USING 'ZT601-CRDATE'
                                  SY-DATUM.          "System date
    PERFORM BDC_FIELD       USING 'ZT601-CRTIME'
                                  SY-UZEIT.          "System time
    PERFORM BDC_FIELD       USING 'ZT601-CRUSER'
                                  SY-UNAME.          "System user
*-- Data input screen (After input)
*----- Screen number 0101 of program /1BCDWB/DBZT601
    PERFORM BDC_DYNPRO      USING '/1BCDWB/DBZT601' '0101'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/EBACK'.                 "Back
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'ZT601-CRUSER'.    "Field on Cursor
*-- Table definition screen]
*----- Screen number 2000 of program SAPLSD02
    PERFORM BDC_DYNPRO      USING 'SAPLSD02' '2000'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'DD02D-TABCLTEXT'. "Field on Cursor
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=WB_BACK'.               "Back
*-- The first screen of SE11
*----- Screen number 0102 of program SAPMSRD0
    PERFORM BDC_DYNPRO      USING 'SAPMSRD0' '0102'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'RSRD1-TBMA_VAL'.   "Field on Cursor
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '=BACK'.
    PERFORM BDC_FIELD       USING 'RSRD1-TBMA'
                                  'X'.
    PERFORM BDC_FIELD       USING 'RSRD1-TBMA_VAL'
                                  TBL_NAME.
    PERFORM BDC_INSERT.
ENDLOOP.
PERFORM BDC_CLOSE.
      FORM BDC_DYNPRO                                               *
      Put Program-Id, Dynpro screen number, Start point
      into DBCDATA
--> PROGRAM                                                       *
--> DYNPRO                                                        *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDC_TAB.
BDC_TAB-PROGRAM = PROGRAM.
BDC_TAB-DYNPRO   = DYNPRO.
BDC_TAB-DYNBEGIN = 'X'.
APPEND BDC_TAB.
ENDFORM.
      FORM BDC_FIELD                                                *
      Put Field Name and Value into BDCDATA
--> FNAM                                                          *
--> FVAL                                                          *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDC_TAB.
BDC_TAB-FNAM = FNAM.
BDC_TAB-FVAL = FVAL.
APPEND BDC_TAB.
ENDFORM.
      FORM bdc_process                                              *
FORM BDC_OPEN.
CALL FUNCTION 'BDC_OPEN_GROUP'
       EXPORTING
            CLIENT = SY-MANDT
            GROUP = 'Testsession'
            KEEP   = 'X'
            USER   = SY-UNAME.
IF SY-SUBRC <> 0.
    MESSAGE E006 WITH SY-SUBRC.
ENDIF.
ENDFORM.
      FORM bdc_insert                                               *
FORM BDC_INSERT.
CALL FUNCTION 'BDC_INSERT'
       EXPORTING
            TCODE            = 'SE11'
       TABLES
            DYNPROTAB        = BDC_TAB
       EXCEPTIONS
            INTERNAL_ERROR   = 1
            NOT_OPEN         = 2
            QUEUE_ERROR      = 3
            TCODE_INVALID    = 4
            PRINTING_INVALID = 5
            POSTING_INVALID = 6
            OTHERS           = 7.
IF SY-SUBRC <> 0.
    MESSAGE E007 WITH SY-SUBRC.
ENDIF.
CLEAR: BDC_TAB.
ENDFORM.
      FORM bdc_close                                                *
FORM BDC_CLOSE.
CALL FUNCTION 'BDC_CLOSE_GROUP'
       EXCEPTIONS
            NOT_OPEN    = 1
            QUEUE_ERROR = 2
            OTHERS      = 3.
IF SY-SUBRC <> 0.
    MESSAGE E008 WITH SY-SUBRC.
ENDIF.
ENDFORM.

God I forgot to refresh Internal table after putting record into Session.
Now I'm done.
You guys be careful too.

Error in batch input through a job (mm01)

Hi,
I have a problem with a batch input on MM01.
I want to extend material for a new center and I do it through a batch input. If I execute this batch input with F8 and in mode = 'N', it ends ok.
The problem is when I run this program with a job, the material is not added to the new center.
Can anyone help me?
Thanks,
Liliana.

Hi,
Try using BAPI BAPI_MATERIAL_SAVEDATA...
Check this link for a sample code..
http://www.sap-img.com/abap/bapi-to-copy-materials-from-one-plant-to-another.htm
Thanks,
Naren

Error exec. Background Mode a Batch-Input using KP26 Transaction Code

I have a program that build a Batch-Input based on transaction code KP26.
I encounter the following error :
Field Z-BDC02(1) is not an input field (Program : SAPLKPP2 Screen : 0112)
When executing in background I got the error and when executing in Foreground, it is OK.
I use SHDB to look at the field needed and it gave me the same field to use.
Here is an extract of my program for the field I have the issue on :
    PERFORM F100_BDC_FIELD USING 'Z-BDC02(01)' I_T01-LST.
    PERFORM F100_BDC_FIELD USING 'Z-BDC05(01)' I_T01-SPRED.
    PERFORM F100_BDC_FIELD USING 'Z-BDC07(01)' I_T01-TOV.
    PERFORM F100_BDC_FIELD USING 'Z-BDC08(01)' I_T01-TOF.
Any one have an hint to solve this ?

Hi,
Just one remark: batch input is always executed in synchronous mode (hopefully, otherwise we would get many lock issues during mass updates!) Or is there something I missed?
Same thing when you use BDC_INSERT, CTU_PARAMS is ignored ([SAP note 1437811 (Batch input: BDC_INSERT parameter CTUPARAMS)|https://service.sap.com/sap/support/notes/1437811 ])
About the issue, I don't know, so maybe explain more about the context: for instance, do you run the session under a different user? (for instance, the user could be assigned a transaction/screen variant with table control variant, that protects some fields) Do you have one transaction in the batch input session or are there several ones. Try with one only to see if it works. If yes, then maybe it's something in memory that changes the "input-capability" of the field after the first transaction.
Sandra

No batch input data for screen for VF01

Hi All,
Iam trying to to create billing document using BDC for VF01 with sales order. For single line item it is working fine and that to in Mode 'A'. But while creating invoices using multiple sales orders , Iam getting the following error.
No batch input data for screen 'SAPMV60A' '0102' . Error - 0344.
Kindly help me as I was strucked here.
My code .
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KOMFK-VBELN(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                  gwa_bdc-vbeln.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SICH'.
    REFRESH messtab[].
    CALL TRANSACTION 'VF01' USING bdcdata
                     OPTIONS FROM wa_options
                     MESSAGES INTO messtab.
Please <removed by moderator> help.
Thanks ,
Srikanth.A
Edited by: Thomas Zloch on Sep 15, 2011 1:47 PM

Hi Jurgen
LOOP AT git_bdc INTO gwa_bdc.
   refresh messtab[].
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KOMFK-VBELN(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                  gwa_bdc-vbeln.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'VBRK-FKART'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SICH'.
    REFRESH messtab[].
    CALL TRANSACTION 'VF01' USING bdcdata
                     OPTIONS FROM wa_options
                     MESSAGES INTO messtab.
Error message population....
REFRESH bdcdata[].
ENDLOOP.
Thanks,
Srikanth.A

I am getting an error while running Batch input session.

While running BDC getting error that "Enter Discount Base, Automatic calculation not possible". I checked all the settings at company code level, tax code settings, document type settings. I am not getting it. While doing mannual posting the error is not coming.
Please help me on this.

Hi,
While creating Material master sometime warning message will come for some materials . So while doing the LSMW Recording method it will record howmany times you are entering the "Enter" key also. So while doing batch input fome article it may stop at some point, so better run the LSMW in foreground and check were it stops exactly.
Regards
GK.

PO creation using LSMW through batch input method

Hi, I am new to working with LSMW and i have completed a project for creating purchase orders using the direct data input method. I need to do the same using batch input method, however in the maintain structure relationship step, it is only allowing me to assign one structure to the recording that i have done, however in po creation we need separate (nested) structure for header and line item, could anybody help me past this please?

Hi Rudra!
OK, now you just know, why you have only one line, not multiple PO item lines. To get a dynamic number of items, you need a complex program - just like standard direct input.
If you need a field, which is not part of this program, don't try to write your own program for batch input - it's just to much work before you have a good result.
You can use Bapi method instead with BAPI_PO_CREATE1. This can handle a lot of fields and there is some documentation available how to fill the Bapi.
If this looks to complicated in the first moment, think about creation of POs via direct input and a small batch recording to change your additional field(s) afterwards. (You can select EKPO table to generate list of 'wrong' migrated orders for input in LSMW.) Use field 'Item' in the bottom of ME22 to position your desired line in first screen line, just change one PO-line after one other (every time a 'save' -> no problem with different number of lines / PO).
Regards,
Christian

Batch input FV50

Similar Messages

Maybe you are looking for