Batch input session to FB01 using standard program RFBIBL00
Hi all,
I am creating a batch input session using the standard program RFBIBL00 to simulate transaction FB01.
My problem is when I process the "batch input session" (using transaction SM35), this finish ok, but in the log I am retrieving the following message:
"Field BSEG-DMBTR. does not exist in the screen SAPMF05A 0300"
This is a success message and the document is created ok,and the field DMBTR is informed ok.
Has somebody some idea?.
Thanks so much in advance for any answer.
Hi gundam,
1. Or is there any method to wait here until the process is completed before further processing?
There is no such direct method to wait.
2. Immediately after submitting in background,
we cannot wait
neither can we LOOP and go on detecting
whether the b/g process has completed or not !
3. To over come such problems,
we have to use another technique.
4. we have to submit another
job which will get triggered
on event SAP_END_OF_JOB
ie. when the original job will finish,
our new job will AUTOMATICALLY get triggered,
5. This new job / program
will do the FURTHER actions !
regards,
amit m.
Similar Messages
-
How to check whether a batch input session is completed in ABAP program
I have created a ABAP program to create a batch input session (reference to RSBDCSUB). After the creation of the batch input session, I kick it to start and read the execution log. However, sometimes I cannot read anything from the execution log as the execution of the batch input is a synchronized process to the execution of my program, i.e. at the time being that I try to read the log of a particular transaction, that transaction is being processing / haven't start processing.
How can I check whether a batch input session is completed in the program?
The code that corresponding to the triggering of batch input session:
SUBMIT (SUBREPORT)
USER MTAB-USERID
VIA JOB MTAB-GROUPID
NUMBER JNUMB
WITH QUEUE_ID EQ MTAB-QID
WITH MAPPE EQ MTAB-GROUPID
WITH MODUS EQ 'N'
WITH LOGALL EQ LMODUS
Or is there any method to wait here until the process is completed before further processing?Hi gundam,
1. Or is there any method to wait here until the process is completed before further processing?
There is no such direct method to wait.
2. Immediately after submitting in background,
we cannot wait
neither can we LOOP and go on detecting
whether the b/g process has completed or not !
3. To over come such problems,
we have to use another technique.
4. we have to submit another
job which will get triggered
on event SAP_END_OF_JOB
ie. when the original job will finish,
our new job will AUTOMATICALLY get triggered,
5. This new job / program
will do the FURTHER actions !
regards,
amit m. -
LSMW - Error in Inventory - Create batch input session
Hello good day.
I'm trying to create a batch input session for inventory upload (Standard Batch Input program - RM07MMBL) and when I select the Name of logical file = "MM_INVENTORY_MANAGEMENT_GOODS_MOVEMENT" and press F8, the following error occurs:
<b>Sequential file mmgoods cannot be opened
Message no. M7 850</b>
Now as the legend says.... I've contacted my system administrator and he keeps telling me everything is ok, but the error keeps appearing, where can I see if I have authorization for this "file" ???
Where is it created ??
I need more info on this.
Your help is very much appreciated.
Thank you.
Juango to file transaction n check for the logical file path and logical file weather it is defined correctly r not?
if it is correctly defined check for the file, weather the flat file is defined at the correct location which is defined in the logical file path
u can refer the below link also
Re: Logical file
Regards,
Naveen -
Please help me with some questions with batch input session?
hello everyone.
I come to some questions like
1 What is a batch input session ,
2 What is the alternative to batch input session?
3 An ABAP program creates a batch input session. We need to submit the program and the batch session in back ground. How to do it?
would you please help me with the questions, couldn't thank you more.
Best regards
FrankHi
Batch Input Session:
BATCH INPUT SESSION is an intermediate step between internal table
and database table. Data along with the action is stored in session
ie data for screen fields, to which screen it is passed, program
name behind it, and how next screen is processed.
Three processing modes of executing Batch Input Session :-
Run Visibly : You can correct faulty transactions online & work step-by-step through the transactions not yet executed.
Display Errors only : You can correct faulty transactions online. Transactions not yet executed, but without error, run in the background.
Run in Background .
2) What is the alternative to batch input session?
Call transaction.
3) An ABAP program creates a batch input session. We need to submit the program and the batch session in back ground. How to do it?
go to SM36 and create background job by giving
job name,job class and job steps (JOB SCHEDULING) -
BDC programming using Batch input Session.
Hello Experts.
I'm an ABAP beginner. I've benn practicing BDC programming using Batch input Session
at the moment.
This is the program that upload Local file which has plural records, and put the records into a Session.
These are the records.
413459,KIM EI HWAN121 ,19810607,MIADONG1234
423459,KIM EI HWAN122 ,19810607,MIADONG1235
433459,KIM EI HWAN123 ,19810607,MIADONG1236
443459,KIM EI HWAN124 ,19810607,MIADONG1237
453459,KIM EI HWAN125 ,19810607,MIADONG1238
463459,KIM EI HWAN126 ,19810607,MIADONG1239
I succeeded making Session.
However, for some reaseon, every record in the Session has got the same, value which is the first record.
Why is this happening? And How can I correct the code below?
REPORT ZBCUSER002_BATCH NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZBATCH.
= Types definition ===================================================
TYPES: BEGIN OF TYP_LOCAL, "For Local file upload
RECORD(200) TYPE C,
END OF TYP_LOCAL.
= Internal table definition ==============================================
DATA: BEGIN OF BDC_TAB OCCURS 0. "BDCDATA itab
INCLUDE STRUCTURE BDCDATA.
DATA: END OF BDC_TAB.
DATA: BEGIN OF MESSAGE_BDC OCCURS 0. "Message itab
INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF MESSAGE_BDC.
DATA: TBL_LOCAL TYPE STANDARD TABLE OF TYP_LOCAL, "Local file itab
F_TBL TYPE FILETABLE. "FILETABLE fot local
= Structure table definition =========================================
DATA: STR_F_TBL LIKE LINE OF F_TBL, "FILETABLE structure
STR_LOCAL TYPE TYP_LOCAL. "Local file structure
= Variable definition ================================================
DATA: LV_RC TYPE I, "Method parameter
ENUMBER TYPE ZT601-ENUMBER, "Employee number
NAME TYPE ZT601-NAME, "Employee name
BIRTH TYPE ZT601-BIRTH, "Birthday
HOMETOWN TYPE ZT601-HOMETOWN, "Hometown
SYSVAL TYPE SY-SUBRC. "System valuible
= Constants definition ===============================================
CONSTANTS: TBL_NAME(10) TYPE C VALUE 'ZT601'. "Table name ZT601
= Parameters definition ==============================================
PARAMETERS: F_NAME TYPE RLGRAP-FILENAME OBLIGATORY, "File path
EXECMODE(1) TYPE C. "Execute mode
INITIALIZATION
*----- Initialize all valuables, structures and internal tables
CLEAR: LV_RC,
STR_F_TBL,
STR_LOCAL,
ENUMBER,
NAME,
BIRTH,
HOMETOWN.
REFRESH: F_TBL,
TBL_LOCAL.
AT SELECTION-SCREEN
*----- When the button next to Parameter 'F_NAME',
*----- File dialog open.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR F_NAME.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'SELECT FILE'
DEFAULT_FILENAME = '*.TXT'
CHANGING
FILE_TABLE = F_TBL
RC = LV_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
OTHERS = 3
*----- system valiable check.
*----- If done properly,
*----- Put the path into the File path parameter
IF SY-SUBRC = 0.
READ TABLE F_TBL INTO STR_F_TBL INDEX 1.
F_NAME = STR_F_TBL.
*----- If not done properly, show message
*----- An error occured while getting file path then end program
ELSE.
MESSAGE E000.
ENDIF.
*----- Execute code can only be A or N.
AT SELECTION-SCREEN ON EXECMODE.
IF EXECMODE <> 'A' AND EXECMODE <> 'N'.
MESSAGE E001.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
*----- Upload Local file of file path parameter.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = F_NAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = TBL_LOCAL
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
OTHERS = 6.
*----- System valiable check.
*----- If not done properly, show an error message
*----- An error occured while uploading local file then end program
IF SY-SUBRC <> 0.
MESSAGE E002.
ENDIF.
PERFORM BDC_OPEN.
*----- Loop Internal table
LOOP AT TBL_LOCAL INTO STR_LOCAL.
*----- Spilt the file record and put them into each valiable.
SPLIT STR_LOCAL AT ',' INTO ENUMBER
NAME
BIRTH
HOMETOWN.
*----- Data check Function module
CALL FUNCTION 'DATE_CHECK_PLAUSIBILITY'
EXPORTING
DATE = BIRTH
EXCEPTIONS
PLAUSIBILITY_CHECK_FAILED = 1
OTHERS = 2.
*----- When error occurs while checking date, show an error message.
*----- (&1) is not date
IF SY-SUBRC <> 0.
MESSAGE E003 WITH BIRTH.
ENDIF.
*-- The first screen of SE11
*----- Screen number 0102 of program id SAPMSRD0
PERFORM BDC_DYNPRO USING 'SAPMSRD0' '0102'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RSRD1-TBMA_VAL'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SHOW'. "Display button
PERFORM BDC_FIELD USING 'RSRD1-TBMA'
'X'.
PERFORM BDC_FIELD USING 'RSRD1-TBMA_VAL'
TBL_NAME. "ZT601
*-- Table definition screen
*----- Screen number 2000 of program id SAPLSD02
PERFORM BDC_DYNPRO USING 'SAPLSD02' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'DD02D-TABCLTEXT'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TDED'. "Create entry
PERFORM BDC_FIELD USING 'BDC_SUBSCR'
'SAPLSD02'.
PERFORM BDC_FIELD USING 'BDC_SUBSCR'
'SAPLSED5'.
*-- Data input screen
*----- Screen number 0101 of program /1BCDWB/DBZT601
PERFORM BDC_DYNPRO USING '/1BCDWB/DBZT601' '0101'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ZT601-CRUSER'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SAVE'. "Save
PERFORM BDC_FIELD USING 'ZT601-MANDT'
SY-MANDT. "Client
PERFORM BDC_FIELD USING 'ZT601-ENUMBER'
ENUMBER. "Employee number
PERFORM BDC_FIELD USING 'ZT601-NAME'
NAME. "Employee name
PERFORM BDC_FIELD USING 'ZT601-BIRTH'
BIRTH. "Birthday
PERFORM BDC_FIELD USING 'ZT601-HOMETOWN'
HOMETOWN. "Hometown
PERFORM BDC_FIELD USING 'ZT601-CRDATE'
SY-DATUM. "System date
PERFORM BDC_FIELD USING 'ZT601-CRTIME'
SY-UZEIT. "System time
PERFORM BDC_FIELD USING 'ZT601-CRUSER'
SY-UNAME. "System user
*-- Data input screen (After input)
*----- Screen number 0101 of program /1BCDWB/DBZT601
PERFORM BDC_DYNPRO USING '/1BCDWB/DBZT601' '0101'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/EBACK'. "Back
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ZT601-CRUSER'. "Field on Cursor
*-- Table definition screen]
*----- Screen number 2000 of program SAPLSD02
PERFORM BDC_DYNPRO USING 'SAPLSD02' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'DD02D-TABCLTEXT'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=WB_BACK'. "Back
*-- The first screen of SE11
*----- Screen number 0102 of program SAPMSRD0
PERFORM BDC_DYNPRO USING 'SAPMSRD0' '0102'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RSRD1-TBMA_VAL'. "Field on Cursor
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BACK'.
PERFORM BDC_FIELD USING 'RSRD1-TBMA'
'X'.
PERFORM BDC_FIELD USING 'RSRD1-TBMA_VAL'
TBL_NAME.
PERFORM BDC_INSERT.
ENDLOOP.
PERFORM BDC_CLOSE.
FORM BDC_DYNPRO *
Put Program-Id, Dynpro screen number, Start point
into DBCDATA
--> PROGRAM *
--> DYNPRO *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDC_TAB.
BDC_TAB-PROGRAM = PROGRAM.
BDC_TAB-DYNPRO = DYNPRO.
BDC_TAB-DYNBEGIN = 'X'.
APPEND BDC_TAB.
ENDFORM.
FORM BDC_FIELD *
Put Field Name and Value into BDCDATA
--> FNAM *
--> FVAL *
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDC_TAB.
BDC_TAB-FNAM = FNAM.
BDC_TAB-FVAL = FVAL.
APPEND BDC_TAB.
ENDFORM.
FORM bdc_process *
FORM BDC_OPEN.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = 'Testsession'
KEEP = 'X'
USER = SY-UNAME.
IF SY-SUBRC <> 0.
MESSAGE E006 WITH SY-SUBRC.
ENDIF.
ENDFORM.
FORM bdc_insert *
FORM BDC_INSERT.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'SE11'
TABLES
DYNPROTAB = BDC_TAB
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
MESSAGE E007 WITH SY-SUBRC.
ENDIF.
CLEAR: BDC_TAB.
ENDFORM.
FORM bdc_close *
FORM BDC_CLOSE.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE E008 WITH SY-SUBRC.
ENDIF.
ENDFORM.God I forgot to refresh Internal table after putting record into Session.
Now I'm done.
You guys be careful too. -
How to process batch input session through program
Hi Friends,
I am getting 5 batch input sessions in SM35,but I want to process these all sessions through program without going to SM35.
How it is possible through Program?
Please Guide me!
Thanks,
YogeshHi,
It's the report to run the batchinput sessions.
When you create to B.I. session, you can execute it by transaction SM35 (but it uses rsbdcsub) or rsbdcsub.
For example you can use it in the same program where you create B.I.:
Here the code to fill the structures of FI batch input
standard....
...here it creates session...
SUBMIT RFBIBL00 WITH DS_NAME = VA_FILE
WITH CALLMODE = CALLMODE AND RETURN.
....here it runs session....
SUBMIT RSBDCSUB WITH MAPPE = P_NAME
WITH VON = SY-DATUM
WITH BIS = SY-DATUM
WITH FEHLER = ' '
TO SAP-SPOOL
LIST NAME P_NAME
LIST DATASET P_NAME
COVER TEXT P_NAME
NEW LIST IDENTIFICATION ' '
EXPORTING LIST TO MEMORY
AND RETURN.
regards,
Shiva. -
LSMW Routing Standard Batch Input Create Batch Input Session
Hello All,
I am using LSMW for routing upload, using standard batch input method. Program RCPTRA01.
I am facing this quite peculiar problem.
I have tried first with separate text file for every source structure. Everything works fine till convert data step.
But when I go for 'Create Batch Input Session' it creates session for tables MAPL, PLKO, PLPO, PLMZ, PLMK. Other tables remain balnk (EAPL, PLFL, PLAB, PLFH, PLPH, PLFT, PLFV, PLWP). Because of this while running the session only the header and material assignment to task list get uploaded. Rest data, operation, MIC, component allocation do not get uploaded.
I have also tried for one text file for multiple structure. In that I face porblem for BDC creation. While debugging I faced th same thing in this also.
Could anyone please explain me the soution for this? Do I need to amend any progrm fior this?
Expecting lightning fast replies from Gurus....
MimiriHello All,
I am awaiting your reply on this.......
Mimiri -
How to process a batch input session directly from the program
Hi,
I have developed a program which will create a batch input session.
When the program is executed, the session should get processed . ie. the user need not have to go to sm35 to process the session. I am facing some problem in this.
I am using BDC_INSERT by passing the tcode . The session is getting processed, but when i go to sm35, i noticed that the session is still listed under the "New" tab instead of the "Processed" tab.
Also I am not getting the final window with the buttons " Session overview" and "Exit Batch Input".
Please help me out in this.Hi
U have to submit the program RSBDCSUB:
SUBMIT RSBDCSUB WITH MAPPE = <session>
WITH VON = SY-DATUM
WITH BIS = SY-DATUM
WITH FEHLER = ' '
EXPORTING LIST TO MEMORY
AND RETURN.
Max -
Running Batch Input sessions in One program
Hi Guys.
I am sure this question might have come up before. Reall y need quick help in this hence posted the same.
I need to develop a program which creates several batch input sessions.
At the end of the program all these sessions should ve triggerred in the background.
Please let me know if this can be done and if yes can someone send me psuedocode for same.
This is very urgent.
thxHi Vijay,
Using the following function modules you can create a batch input session.
BDC_OPEN_GROUP
BDC_INSERT
BDC_CLOSE_GROUP
Example - http://www.sap-img.com/abap/auto-disallowed-back-posting-to-previous-period.htm
You can use the program RSBDCSUB to schedule batch input sessions in background.
http://www.sap-img.com/abap/learning-bdc-programming.htm - How to write BDC program
Executing batch-input sessions in background jobs - Example for how to call the bdc session.
Hope these are helpful.
Thanks
Vinod -
Why we use more of Batch Input Session instead of Call Transaction?
Hi,
Please tell me why we use more of Batch Input Session instead of Call Transaction??
GaganHi Gagan,
See the Topic: Factors in choosing suitable method of bdc
in ABAP Programming Forum Section.
Or Follow the link below
Re: Factors in choosing suitable method of bdc
Regards,
Vijay -
How to run the Batch input session(SM35) in background thru Report program
Hi Experts,
I am working in one modification report requirement ,the report is Mass upload will update and run the file via batch input session. The client requirement is to implement the report execution in background mode , the batch input session will process automatically (ie. the job runs the batch input session in background and process the session ends).
Currently, the report calls SM35 to write a batch input session and the user manually selects the session and record the transactions.
Once the Transaction enters and the selection-screen inputs are given, then the transaction executed in background mode and all the above batch input process to be implemented.
Please advise and guide me, how to proceed.
I need your guidance to proceed via Call transaction using bdcdata statement, if it can be achieved the requirement.
Thanks & Regards
San.Hi Arabind Prasad,
Thanks for your inputs.
I know the process of the report Execution in background and job steps.
I want the inputs for how to upload thru Batch input session in background job and the session should also processed automatically
Currently the report logic declared like call transaction 'SM35' and skip first screen.Once the report (tcode) executed (not in background) It writes one session in SM35. The user should select the session and process the transaction manually.
The new requirement is, if the report (tcode) executes in background mode...what and how the batch input session should be declared and how it process automatically (like you said mode 'N').
Hope I am clear in my query.
Please advise.
Regards
San.
Edited by: San Learner on Mar 1, 2011 7:16 PM -
Mass updates in CUA via a Batch Input Session
We are trying to do a mass upload of users in CUA, via SU01. When we come to create the batch input session, by creating a record, we find that the only thing that is not saved is the role data entered on the role tab, everything else gets saved.
Can anybody help with a solution ?Hi Geoff
Initial load of user through Batch-Input or CATT is kind of difficult when you are using CUA.
I use a couple of ABAP Reports for this, one that creates the users, and one to assign the roles, but it's not SAP standard reports
There are some good BAPI'S for both to create your own load program.
Regards
Morten Nielsen -
Batch Input Session for Errors
Hello
I'm running a Batch Input (in a FM) and I want to create a session for records with errors. In case of error (output parameter of the FM subrc NE 0) I send it to that session for later running.
Can you explain how do I do this? Thanks!hi,
Look at the sample program
REPORT Z_BDC_CUSTOMER_R07
NO STANDARD PAGE HEADING LINE-SIZE 255.
INCLUDE Z_CUSTOMER_BDC_R02.
*-----AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF SY-UCOMM = 'ONLI'.
*-----group and user must be filled to create a session
IF SESSION = 'X' AND
GROUP = SPACE OR USER = SPACE.
MESSAGE E613(MS).
ENDIF.
*----Presentation File name should be entered
IF SESSION = 'X' AND RB_PRE = 'X'
AND P_FILE = '' .
MESSAGE E004(ZROJA).
ELSEIF CTU = 'X' AND RB_PRE = 'X'
AND P_FILE = '' .
MESSAGE E004(ZROJA).
ENDIF.
*----Application File name should be entered
IF SESSION = 'X' AND RB_APP = 'X'
AND P_FILE_A = '' .
MESSAGE E004(ZROJA).
ELSEIF CTU = 'X' AND RB_APP = 'X'
AND P_FILE_A = '' .
MESSAGE E004(ZROJA).
ENDIF.
ENDIF.
*-----AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
*----When file from Presentation server is selected
IF RB_PRE = 'X'.
*----To make the application server inactive
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'AAA'.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
*----When file from Presentation server is selected
RB_APP = 'X'.
*----To make the application server inactive
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'BBB'.
SCREEN-ACTIVE = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
*-----AT SELECTION-SCREEN ON VALUE-REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE_A.
CALL FUNCTION 'F4_DXFILENAME_TOPRECURSION'
EXPORTING
I_LOCATION_FLAG = 'A'
I_SERVER = ' '
FILEOPERATION = 'R'
IMPORTING
O_PATH = P_FILE_A
EXCEPTIONS
RFC_ERROR = 1
ERROR_WITH_GUI = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*-----AT SELECTION-SCREEN ON VALUE-REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*-----Function module for value-request
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = V_FILE_NAME.
*----Assigning the flatfile to parameter
P_FILE = V_FILE_NAME.
*-----START-OF-SELECTION
START-OF-SELECTION.
DATA: FILENAME TYPE STRING.
*----When file from Presentation Server is selected
IF RB_PRE = 'X'.
FILENAME = P_FILE.
*-----Function module to upload data from the presentation server
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FILENAME
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = IT_KNA1
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
*----Upload the File from Application Server
OPEN DATASET P_FILE_A FOR INPUT IN TEXT MODE ENCODING DEFAULT.
*-----to display an error if the file is not in application server
IF SY-SUBRC NE 0.
MESSAGE E006(ZROJA).
ELSE.
DO.
READ DATASET P_FILE_A INTO X_KNA1.
IF SY-SUBRC EQ 0.
APPEND X_KNA1 TO IT_KNA1.
ELSE.
EXIT.
ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET P_FILE_A.
ENDIF.
*-----To open a batchinput session
IF SESSION = 'X'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = GROUP
KEEP = KEEP
USER = USER
PROG = SY-CPROG
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*-----Filling the BDCDATA using the Internal Table
LOOP AT IT_KNA1 INTO X_KNA1.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02D-KTOKD'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02D-KUNNR'
X_KNA1-KUNNR.
PERFORM BDC_FIELD USING 'RF02D-KTOKD'
X_KNA1-KTOKD.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'KNA1-SPRAS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'KNA1-NAME1'
X_KNA1-NAME1.
PERFORM BDC_FIELD USING 'KNA1-SORTL'
X_KNA1-SORTL.
PERFORM BDC_FIELD USING 'KNA1-ORT01'
X_KNA1-ORT01.
PERFORM BDC_FIELD USING 'KNA1-PSTLZ'
X_KNA1-PSTLZ.
PERFORM BDC_FIELD USING 'KNA1-LAND1'
X_KNA1-LAND1.
PERFORM BDC_FIELD USING 'KNA1-SPRAS'
X_KNA1-SPRAS.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'KNA1-LZONE'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'KNA1-LZONE'
X_KNA1-LZONE.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0125'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'KNA1-NIELS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'KNBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0340'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02D-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0370'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02D-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_FIELD USING 'KNA1-CIVVE'
'X'.
PERFORM BDC_DYNPRO USING 'SAPMF02D' '0360'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'KNVK-NAMEV(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
*----If Session is selected
IF SESSION = 'X'.
*----To insert data into batch input session
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'XD01'
TABLES
DYNPROTAB = IT_BDCDATA.
REFRESH IT_BDCDATA.
AT LAST.
SKIP.
WRITE:/ TEXT-001.
ENDAT.
ELSE.
*----Calling the transaction
CALL TRANSACTION 'XD01' USING IT_BDCDATA
MODE CTUMODE
UPDATE CUPDATE
MESSAGES INTO IT_BDCMSGCOLL.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
ENDIF.
ENDLOOP.
*----If Session is Selected
IF SESSION = 'X'.
*----To close the session
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*-----END-OF-SELECTION
END-OF-SELECTION.
*----To display the success messages
LOOP AT IT_BDCMSGCOLL INTO X_BDCMSGCOLL WHERE MSGTYP = 'S' .
*-----If Message Type Differs
ON CHANGE OF X_BDCMSGCOLL-MSGTYP.
WRITE:/ TEXT-002.
SKIP.
ULINE (58).
WRITE:/01 SY-VLINE,02 TEXT-003,
14 SY-VLINE,15 TEXT-004,
21 SY-VLINE,22 TEXT-005,
35 SY-VLINE,36 TEXT-006,
58 SY-VLINE,/01 SY-ULINE(58).
ENDON.
WRITE:/01 SY-VLINE,02 X_BDCMSGCOLL-MSGTYP,
14 SY-VLINE,15 X_BDCMSGCOLL-TCODE,
21 SY-VLINE,22 X_BDCMSGCOLL-MSGV1,
35 SY-VLINE,36 TEXT-007,
58 SY-VLINE,/01 SY-ULINE(58).
ENDLOOP.
SKIP 2.
*----To display the error messages
LOOP AT IT_BDCMSGCOLL INTO X_BDCMSGCOLL WHERE MSGTYP = 'E'.
*-----If Message Type Differs
ON CHANGE OF X_BDCMSGCOLL-MSGTYP.
WRITE:/ TEXT-008.
SKIP.
ULINE (58).
WRITE:/01 SY-VLINE,02 TEXT-003,
14 SY-VLINE,15 TEXT-004,
21 SY-VLINE,22 TEXT-005,
35 SY-VLINE,36 TEXT-006,
58 SY-VLINE,/01 SY-ULINE(58).
ENDON.
WRITE:/01 SY-VLINE,02 X_BDCMSGCOLL-MSGTYP,
14 SY-VLINE,15 X_BDCMSGCOLL-TCODE,
21 SY-VLINE,22 X_BDCMSGCOLL-MSGV1,
35 SY-VLINE,36 'Customer Already Exits',
58 SY-VLINE,/01 SY-ULINE(58).
ENDLOOP.
*-----FORM fill_bdcdata
FORM FILL_BDCDATA USING L_DYNPRO TYPE ANY
L_FNAME TYPE ANY
L_FVALUE TYPE ANY.
CLEAR X_BDCDATA.
IF L_DYNPRO = 'X'.
X_BDCDATA-DYNBEGIN = 'X'.
X_BDCDATA-PROGRAM = L_FNAME.
X_BDCDATA-DYNPRO = L_FVALUE.
ELSE.
X_BDCDATA-FNAM = L_FNAME.
X_BDCDATA-FVAL = L_FVALUE.
ENDIF.
APPEND X_BDCDATA TO IT_BDCDATA.
ENDFORM. "BDC_FIELD
*-----Start new screen
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM. "BDC_DYNPRO
*-----Insert field
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDIF.
ENDFORM. "BDC_FIELD -
BDC Batch input session method
Hi ,
I am new to SAP progamming. Pls let me know the basics of BDC Batch Input session method and Call transaction method. I want to know the pros and cons of both methods with justification. Please help me in this regarding.Hi,
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
Session method:
1. Data migration is done in two steps .. Generate session and Process session.
So resouces can be used efficiently. good for bulkdata migration.
2. Session method generates error log when u process a session.
3. No SY-SUBRC can be returned after each transaction is called.
4. Provides synchronous Updation only...
Call transaction method:
1. Data migration is done in single steps ..bcoz Transactions are called immediately after filling BDCDATA table. So good for small amount of data.
2. We have to collect error messages using BDCMSGCOLL Table
3. Returns SY-SUBRC and Messages ..after each Call Transaction..very useful feature for further processing based on the Status and Messages..
4. Supports Asynch or Synch Updation.
Example code for session method
Here is the porgram for Purchase order
REPORT zmm0069 NO STANDARD PAGE HEADING
MESSAGE-ID z0
LINE-SIZE 132
LINE-COUNT 65(2).
Internal Tables *
*Internal table for the purchasing info records fields.
DATA: BEGIN OF i_inforecord OCCURS 0,
matnr(18),
lifnr(10),
uom(3),
ekgrp(3),
planned_time(3),
under_tol(3),
over_tol(3),
qty(10),
price_cat(5),
inco(3),
designation(28),
netpr(13),
scale_qty1(10),
scale_pr1(13),
scale_qty2(10),
scale_pr2(13),
scale_qty3(13),
scale_pr3(10),
scale_qty4(13),
scale_pr4(10),
scale_qty5(13),
scale_pr5(10),
scale_qty6(13),
scale_pr6(10),
scale_qty7(13),
scale_pr7(10),
scale_qty8(13),
scale_pr8(10),
scale_qty9(13),
scale_pr9(10),
scale_qty10(13),
scale_pr10(10),
END OF i_inforecord.
Internal table for Old and New Vendor number
DATA : BEGIN OF i_lfb1 OCCURS 1,
lifnr(10),
altkn(10),
END OF i_lfb1.
Declare internal table for Call Transaction and BDC Session
DATA: i_bdc_table LIKE bdcdata OCCURS 0 WITH HEADER LINE.
Global Variables *
DATA: g_counter(2) TYPE n,
g_field_name(18) TYPE c,
zc_yes TYPE syftype VALUE 'X'.
Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
PARAMETERS: p_fname1 TYPE localfile .
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-002.
PARAMETERS: p_rloc1 AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN BEGIN OF BLOCK c WITH FRAME TITLE text-003.
PARAMETERS p_group(12) OBLIGATORY DEFAULT 'ZPURCHINFO'.
SELECTION-SCREEN END OF BLOCK c.
SELECTION-SCREEN END OF BLOCK b.
SELECTION-SCREEN END OF BLOCK a.
**WRITE the report header
TOP-OF-PAGE.
INCLUDE zheading.
Start of selection *
START-OF-SELECTION.
Load Input file
PERFORM f_load_input_file.
Create BDC records.
PERFORM create_bdc_records .
*& Form Create_BDC_records
Perform the BDC for the records in the internal table
FORM create_bdc_records .
IF NOT i_inforecord[] IS INITIAL.
Open BDC session
PERFORM open_bdc_session.
SELECT lifnr altkn FROM lfb1 INTO TABLE i_lfb1
FOR ALL ENTRIES IN i_inforecord
WHERE altkn = i_inforecord-lifnr.
Sorting the Internal table for better performance
SORT i_lfb1 BY altkn.
LOOP AT i_inforecord.
***Mapping Old Vendor number to the new Vendor number
READ TABLE i_lfb1 WITH KEY altkn = i_inforecord-lifnr BINARY
SEARCH.
IF sy-subrc EQ 0.
i_inforecord-lifnr = i_lfb1-lifnr.
ENDIF.
CLEAR i_bdc_table[].
PERFORM insert_screen_header.
call transaction 'ME11' using i_bdc_table
mode 'A'.
CLEAR i_bdc_table.
ENDLOOP.
CLEAR i_inforecord[].
PERFORM close_bdc_session.
Release the BDC sessions created
PERFORM release_bdc.
ENDIF.
ENDFORM. " open_group
*& Form bdc_dynpro_start
Start the screen for the transfer of fields
FORM bdc_dynpro_start USING p_g_program_1
p_g_screen.
CLEAR i_bdc_table.
i_bdc_table-program = p_g_program_1.
i_bdc_table-dynpro = p_g_screen.
i_bdc_table-dynbegin = 'X'.
APPEND i_bdc_table.
ENDFORM. " bdc_dynpro_start_start
*& Form bdc_insert_field
Insert field *
FORM bdc_insert_field USING f_name f_value.
IF f_value <> space.
CLEAR i_bdc_table.
i_bdc_table-fnam = f_name.
i_bdc_table-fval = f_value.
APPEND i_bdc_table.
ENDIF.
ENDFORM. "bdc_insert_field
*& Form open_bdc_session
Open a BDC session
FORM open_bdc_session .
Open BDC session and create and update records
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
DEST = FILLER8
group = p_group
HOLDDATE = FILLER8
keep = 'X'
user = sy-uname
RECORD = FILLER1
PROG = SY-CPROG
IMPORTING
QID =
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " create_bdc_session
*& Form insert_screen_header
Screen flow for the transfer of fields
FORM insert_screen_header .
First Screen 100
PERFORM bdc_dynpro_start USING 'SAPMM06I' '0100'.
PERFORM bdc_insert_field USING:'BDC_CURSOR' 'EINA-LIFNR',
'BDC_OKCODE' '/00',
'EINA-LIFNR' i_inforecord-lifnr,
'EINA-MATNR' i_inforecord-matnr,
'EINE-EKORG' '1000',
'RM06I-NORMB' zc_yes.
Next Screen 101
PERFORM bdc_dynpro_start USING 'SAPMM06I' '0101'.
PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'EINA-MAHN1',
'BDC_OKCODE' '/00',
'EINA-MEINS' i_inforecord-uom.
*Next Screen 102
PERFORM bdc_dynpro_start USING 'SAPMM06I' '0102'.
PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'EINE-INCO2',
'EINE-APLFZ' i_inforecord-planned_time,
'EINE-EKGRP' i_inforecord-ekgrp,
'EINE-NORBM' i_inforecord-qty.
PERFORM bdc_insert USING 'EINE-UEBTK' ' '.
PERFORM bdc_insert_field USING:'EINE-PEINH' i_inforecord-scale_qty1,
'EINE-BPRME' i_inforecord-uom,
'EINE-UNTTO' '5',
'EINE-UEBTO' '25',
'EINE-MEPRF' i_inforecord-price_cat,
'EINE-NETPR' i_inforecord-netpr,
'EINE-INCO1' i_inforecord-inco,
'EINE-INCO2' i_inforecord-designation.
Checking for Scale quantities
IF i_inforecord-scale_qty2 = space.
PERFORM bdc_insert_field USING 'BDC_OKCODE' '=BU'.
PERFORM insert_bdc_new.
ELSE.
PERFORM bdc_insert_field USING 'BDC_OKCODE' '=KO'.
Next Screen 201
PERFORM bdc_dynpro_start USING 'SAPMV13A' '0201'.
PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'RV13A-DATAB',
'BDC_OKCODE' '=PSTF'.
Next Screen 201
PERFORM bdc_dynpro_start USING 'SAPMV13A' '0201'.
PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'KONP-KSCHL(01)',
'BDC_OKCODE' '=PSTF',
'RV130-SELKZ(01)' zc_yes.
LAST SCREEN 303
PERFORM bdc_dynpro_start USING 'SAPMV13A' '0303'.
PERFORM bdc_insert_field USING : 'BDC_CURSOR' 'KONM-KBETR(03)',
'BDC_OKCODE' '=SICH'.
Counter to Loop the Item level entry
g_counter = 0.
PERFORM scale_entry USING i_inforecord-scale_qty2
i_inforecord-scale_pr2.
PERFORM scale_entry USING i_inforecord-scale_qty3
i_inforecord-scale_pr3.
PERFORM scale_entry USING i_inforecord-scale_qty4
i_inforecord-scale_pr4.
PERFORM scale_entry USING i_inforecord-scale_qty5
i_inforecord-scale_pr5.
PERFORM scale_entry USING i_inforecord-scale_qty6
i_inforecord-scale_pr6.
PERFORM scale_entry USING i_inforecord-scale_qty7
i_inforecord-scale_pr7.
PERFORM scale_entry USING i_inforecord-scale_qty8
i_inforecord-scale_pr8.
PERFORM scale_entry USING i_inforecord-scale_qty9
i_inforecord-scale_pr9.
PERFORM scale_entry USING i_inforecord-scale_qty10
i_inforecord-scale_pr10.
PERFORM insert_bdc_new.
ENDIF.
ENDFORM. " insert_screen_header
*& Form insert_bdc
Insert BDC
FORM insert_bdc_new .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = 'ME11'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
dynprotab = i_bdc_table
EXCEPTIONS
internal_error = 1
not_open = 2
queue_error = 3
tcode_invalid = 4
printing_invalid = 5
posting_invalid = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR i_bdc_table[].
ENDFORM. " insert_bdc
*& Form close_bdc_session
Close the BDC session
FORM close_bdc_session .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " close_bdc_session
*& Form f_load_input_file
Upload the file
FORM f_load_input_file.
Check always Local file for upload
IF p_rloc1 = zc_yes.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_fname1
filetype = 'DAT'
TABLES
data_tab = i_inforecord
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
STOP.
ENDIF.
ENDIF.
ENDFORM. " f_load_input_file
*& Form release_bdc
Release the session
FORM release_bdc.
SUBMIT rsbdcsub WITH mappe EQ p_group
WITH von EQ sy-datum
WITH bis EQ sy-datum
WITH fehler EQ '.'
EXPORTING LIST TO MEMORY
AND RETURN.
ENDFORM. " release_bdc
*& Form scale_entry
Populate the Scale quantities
-->P_SCALE_QTY
-->P_SCALE_PRICE
FORM scale_entry USING p_scale_qty
p_scale_price.
Increment the Counter
g_counter = g_counter + 1.
IF p_scale_qty <> space.
CONCATENATE 'KONM-KSTBM(' g_counter ')' INTO g_field_name.
PERFORM bdc_insert_field USING g_field_name p_scale_qty.
CONCATENATE 'KONM-KBETR(' g_counter ')' INTO g_field_name.
PERFORM bdc_insert_field USING g_field_name p_scale_price.
ENDIF.
ENDFORM.
*& Form bdc_insert
To uncheck the Unlimited (UEBTK)
FORM bdc_insert USING f_name f_value.
CLEAR i_bdc_table.
i_bdc_table-fnam = f_name.
i_bdc_table-fval = f_value.
APPEND i_bdc_table.
ENDFORM. " bdc_insert
Reward points if it is usefull ....
Cheers,
Chandra Sekhar. -
Table control lines cannot be controlled in Batch Input session ?
I am using a program which creates Batch Input sessions for the transaction FCHR (Online cashed checks) . The second screen is that of a table control where the check number is entered.
I observed that while doing SHDB, if we tick the default size then changing the desktop resolution has no effect on the number of lines in table control - we see 14 lines in both cases.However, when the batch input session is processed, the number of table control lines varies according to the resoution(9 lines for 800600 and approx 15 for 1024768). Selecting the 'Dynpro standard size' option while processing the session has no effect.
I know call transaction with 'default' parameter in optparam will take care of this problem. But I want to know whether Batch Input Session is known to have a problem with different resolutions.HI..
i had the same problem once.... i dealt in the following way
while entering values in table control
1) enter value in the first line
2) look for button on application toolbar using which you can increment line
3) you will not find difference for first line but you will find it when you insert second line and go for next line.
4) now for every increment you will get table conrol as (02) if you are going for recording.
this will surely solve all issue related to table control as it solved for me
regards
Edited by: Mohit Kumar on Feb 19, 2009 12:04 PM
Maybe you are looking for
-
Outlook emails at work - transferring to mac Entourage or Mail or anything at home !
Hi, I use PC Outlook at work. I have loads of personal emails but work does not allow me to use the "export" function to export any emails from my work system, even if personal (ugh). So I cannot export my emails or folders as a .pst file (or anyth
-
How to create a link to multiple links in pdf file
how to create a link to multiple links or a button to multiple links in pdf file. this links is goto diferent pages, no web. sorry for my english.
-
(Have also posted this on Security forum but hope someone on here can help) We need to be able to block users from deleting sales order items. The objects V_VBAK_VKO and V_VBAK_AAT can be used at the 'order header' level but these do not prevent a us
-
Sun one web server 6.0 SP6 crashed
Hi, I get the error message when accessing the web server instance all the time: "the page cannot be displayed" and the error log file says "[29/Dec/2003:09:28:34] catastrophe (12932): Server crash detected (signal SIGBUS) [29/Dec/2003:09:28:34] info
-
"No rates for 63021010 and Excise indicator 2; Normal rates being used"
Hi expert , When we create Excise order and save and then use va02 in change mode than show error " No rates for 63021010 and Excise indicator 2; Normal rates being used " we have all ready maintaind chapter id, and taxes and excise duty comes all