Batch is not showing in transit stock

when i make transfer posting against STO then i maintain receiving batch and isssuing batch.
but when i run t-code mb52, then i found qty and value is showing in stock in transit column but batch is not showing.
why it is so?

Hi
i forgot to mention that the stock-in-transit is available in MARC table in TRAME field.
Stock in transit dont even have storage location forget about batch
Reward if useful
Regards
SE

Similar Messages

  • Quartz Extreme not showing up on stock Mac Pro and card

    I have purchased a new Mac Pro and LED Cinema Display from the Apple store last month. Safari Top Sites is not working and the "help" stated I need Quartz Extreme. Looked in the profile, but it is not listed in the list on the right at all. It is a stock apple card and display.
    Is my monitor video card not even capable of using this feature or do I need to reinstall the system or something??
    Model Name: Mac Pro
    Model Identifier: MacPro4,1
    Processor Name: Quad-Core Intel Xeon
    Processor Speed: 2.66 GHz
    Number Of Processors: 1
    Total Number Of Cores: 4
    L2 Cache (per core): 256 KB
    L3 Cache: 8 MB
    Memory: 3 GB
    Processor Interconnect Speed: 4.8 GT/s
    Boot ROM Version: MP41.0081.B04
    SMC Version (system): 1.39f5
    SMC Version (processor tray): 1.39f5
    Serial Number (system): H09257EM4PC
    Serial Number (processor tray): J592300*MFD <edited by host>
    Hardware UUID: 9F9AAE54-0436-5584-87F4-B99AF0523B22
    NVIDIA GeForce GT 120:
    Chipset Model: NVIDIA GeForce GT 120
    Type: GPU
    Bus: PCIe
    Slot: Slot-1
    PCIe Lane Width: x16
    VRAM (Total): 512 MB
    Vendor: NVIDIA (0x10de)
    Device ID: 0x0640
    Revision ID: 0x00a1
    ROM Revision: 3386
    Displays:
    Display Connector:
    Status: No Display Connected
    LED Cinema Display:
    Resolution: 1920 x 1200
    Pixel Depth: 32-Bit Color (ARGB8888)
    Main Display: Yes
    Mirror: Off *<------------------------------ Quartz Extreme not even listed*
    Online: Yes
    Rotation: Supported
    Connection Type: DisplayPort

    With Snow Leo basically if you can't get quartz extreme you shouldn't be running 10.6.x
    Easy way to tell if it is working though would be that your menu bar across the entire top of the screen is transparent, or if you add a widget to dashboard you will get the ripple effect. If you are on a system where Quartz Extreme is disabled you will not get those effects.

  • Physical inventory document not showing the warehouse stock type in MI24

    Hi Friends,
    I am facing two issues.
    1. In Production system, after executing MI31 for plant 3070, if i see the report in MI24, in Plant 3070, sLoc 0010, for some materials Warehouse stock type is not coming even though the materials are warehouse managed and having warehouse management views are there in material master. for some materials warehouse stock type is coming in the same plant and sloc.
    2. In qulaity system, afetr executing MI31 for Plant 3070, no PID is generated for Sloc 0010 even though the sloc is having materials and those are warehouse managed and having warehouse management views are therein material master.
    where i need to check for the problem,
    Please help me in resolving this issue, this is high priority for me.
    Thanks in advance,
    Ravi.

    >
    Ravi Kumar Bittavarapu wrote:
    >> 1. In Production system, after executing MI31 for plant 3070, if i see the report in MI24, in Plant 3070, sLoc 0010, for some materials Warehouse stock type is not coming even though the materials are warehouse managed and having warehouse management views are there in material master. for some materials warehouse stock type is coming in the same plant and sloc.
    >
    > 2. In qulaity system, afetr executing MI31 for Plant 3070, no PID is generated for Sloc 0010 even though the sloc is having materials and those are warehouse managed and having warehouse management views are therein material master.
    >
    > where i need to check for the problem,
    >
    > Ravi.
    in your training documents (just kidding) .
    You wrote that your storage location is warehouse managed. But MI31 is the transaction to craete physical inventory documents for a non-warehouse-managed location.
    You have to create your physical inventory with WM transactions like LX16.

  • All items of delivery is not showing on SNC Web Portal

    Hi Experts,
    We are facing one strange issue in SNC. I am explaining scenarion in detail.
    We have one sales order having 10 line items in R/3 & it is showing correctly on SNC web portal. For that sales order we have delivery with 10 line items ( out of 10 items 4 items having Batch mentioned in delivery) in R/3 but in SNC Web Portal it is showing only 6 Items. Basically whatever the Items having batch is not showing on SNC Web Portal.
    I have checked lots of deliveries & all are having same issue. I have checked all the IDOCs, XML messages to XI & then APO having all the line Items of delivery but all items are not showing on SNC Web Portal.
    Could you please advice, what it this issue & how can we resolve it?
    Thanks in Advance.....
    Regards
    Sujay

    Hi Chandrasekhar,
    I checked this note but this doesnot answers my query.
    Regards
    SV

  • Stock not showing properly in  for Batch determination

    Dear Gurus,
    While doing the following msg appearing since JAN 01, 2008, IN BATCH DETERMINATION THE SYSTEM NOT SHOWING EXACT QUANTITY AS IN ACTUAL STOCK
    Pls help for this issue,
    Regards,
    Atul

    Dear  Jagdish,
    In MMBE in unrestricted use column there is total 16.979 stock position is there and again for posting ( PGI ) after delivery for selecting batch determination Available Qty is showing 9,999,999,999.000
    How I will correct it could not understand.
    Regards,
    Atul

  • Made a UD to 'Scrap'. But Stock Category is "Q" and does not show in MMBE "Blocked"..WHY?

    Hi,
    I made a UD of an Insp Lot to 'Scrap' in the Inspection lot stock tab.
    The system automatically created a material document with movement type 553 (Direction -) and 551 (Direction +)
    However the stock Category in the material document is "Q". IS THIS CORRECT? SHOULD THIS BE "S" (This is in the WM tab of the material document).
    Also when I query MMBE after the above UD to Scrap, the batch quantity is not shown either in Quality or Blocked stock. IS THIS CORRECT?
    Please advise.
    Regards
    Priyanka

    My understanding was when I input a quantity in 'Scrap' field during UD
    1) The stock should be blocked (hence it will show under blocked stock column in MMBE)
    2) The stock category should be "S" and not "Q"
    I agree that in MMBE based on your explanation the stock should not be shown in blocked.
    But can you explain why the stock category is "Q" instead of "S"
    Regards
    Priyanka

  • Batch not showing at QA32

    Hi,
    We are facing one problem regarding batch....
    Material is maintained in batches, batch entry 1, inspection type 03.
    At process order stage we are entering the batch no before releasing the order. Batch no is generating and going to the database. But at QA32 stage it is not showing on the screen.
    Can anybody pls tell me the reason.
    Regards,
    Rajesh

    Dear,
    As per standard SAP For  inspection type 03 there is no stock posting will happend for 04 insp type so system will display the batch as stock posting is there for batch material.
    Not relevant for stock means that the inspection lot with inspectin type 03 does not put stock on quality hold .
    Hope clear to you.
    Regards,
    R.Brahmankar

  • Manual Reorder point planning stock is not showing in MD04

    HI,
       Would any one help me when i plan for reorder point planing the details furnished below.
    Mrp type: V1
    Lot size :HB
    ROP : 30
    Max stock level :1000
    in Material master settings.But when i run the MRP using MD03 system is not showing available stock in MD04.It is showing 0 stock rather it would show 4 (MMBE un restricted stock..)
    What are thesettings required or any thing missing in IMG. Please help me in this.
    Regards,
    Srini

    Srini,
    You may also want to check if the Unrestricted stock is in a storage location that is excluded from MRP.
    On MD04 you will then see a separate line item at storage location & the Qty =4 should appear as shown below.
    12/02/2009     Unrest Stock                                                       12           12      
    12/02/2009     SLocSt     QANN StLoc: not plnd          0           8     QANN
    12/02/2009     SLocSt     VEND StLoc: not plnd          0           0      VEND
    Hope this helps. Good lcuk.
    thanks,
    Ramm

  • UD Insp. Lot stock tab is not showing

    Dear Friends,
    At the time of UD Insp. Lot stock tab is not showing due to which I am not able to withdraw sample qty ,
    can anyone explain how to add this tab.
    Reg: T.code - QA11

    hi sandip
    UD inspection lot tab page will not appear if you have created the inspection lot manually and the lot is <b>not</b> stock relevant
    regards
    thyagarajan

  • MIGO-Mtype-103 batch not crted for blocked stock.in UD want batch

    Dear Friends ,
    GR at Blocked stock non valuated stock u2013
    Batch management is activated.
    1)     Creating PO
    2)     MIGO with M.Type-103 u2013Goods received for PO in to GR blocked stock.
    Stock quantity of material gets updated. But system does not create batch.
    3)     While making user decision(UD) in quality management (QA32) , system asking batch .
    But batch for that material is not created.
    Therefore I am not able to move stock to unrestricted stock. how to overcome this problem.
    Regards,
    Mahesh.

    Hi Mahesh......
    Please check this thread.....
    Re: Split Valuation configuration
    Thanks & Regards,
    Rahul

  • Not showing any results V_V2 resheduling sales and stock transfer documents

    My client using   IS Retail .  First i create sales order i want resheduling perticular order through V_V2  i enter article and site ,process sales documents,process stock transfer order,unconfirm quantity and leave simulation   but it does not showing any results...previous showing from 2008 to 2010 sales orders only....
    Please give answer i am waiting your reply...
    Edited by: amitp2121 on Mar 3, 2011 11:57 AM

    Hi Hweiling,
    In my opinion V_V1 used to create confirmed backorder (line item where confirm quantity in first schedule line is 0 and there is no second schedule line) .
    V_V2 is used when you want to alocate your stock based of priority or some criteria.
    For example you have order 1 that created on 07.2007 confirmed but you hasn't delivered yet,  then you have order 2 that created on 08.2007 it's not confirmed, and you have the other order 3 that create on 01.2008 and it's confirmed ready to deliver 03.01.2008. You can use V_V2 to alocate the stock to first order, 2nd order and third order. So you can deliver the first order first, 2nd order and then the 3rd order will be in backorder.
    If you run V_V1, it's only update the stock for second item (if stock is enough).
    If you think why it's not update the order that you want  when you run V_V2, please check the criteria and the stock.
    Guys please correct me if I am wrong.
    tsalasi

  • Batch Monitor Does Not Show Compressor Jobs

    On one of my systems, Batch Monitor is not showing current compressor jobs, even though the jobs are running in the background -- and running and completing successfully. On the other systems, all jobs are shown in Batch Monitor as they are being compressed.
    All processing is done on the local machine (no clusters). All jobs are submitted using the Compressor application....the jobs are basically conversions from one codec of QuickTime to another.
    I saw a post regarding this issue, but it didn't appear to be resolved. Any suggestions?
    G5 Quad   Mac OS X (10.4.6)  

    So...guess what I learned?
    How many cables do you have plugged into your monitor?  The set came with a white and blue, and I plugged both in.  Apparently, this causes the issue as the two cables are intended to provide dual screens. 
    Unplug the blue cable from both the computer and the monitor, and then press the "Windows" button with the letter p at the same time.  Make sure "Computer only" is selected from the pop-up window, and press enter.  This, according to an HP support tech, should fix the problem.
    The instructions should make it more clear that both cables are not to be plugged in to a single monitor, but this may also be common sense to people who have experience with dual monitors. 
    I have not yet left my computer unattended to see if this fixes the problem, so let's keep our fingers crossed.

  • Stock over view not showing

    hi MM guru....
    when we initially up load material through MB1C movement type 561...show the massage document no xxxxxxx posted..but in  MMBE not showing..even in MB51  not showing that document no...
    kindly suggest me
    regards
    aqueel

    then use this info, enter it in the selection screen and try to find the document again.
    if you still do not find the document, then you might have entries in the selection screen that restrict your selection.
    Further if you have a document, then you should as well have stock, exept you have some more documents that document goods issues.
    Further, if you have a document, then the item shown in SM13 cannot belong to this document in MB51, as SM13 only lists posting that have failed.

  • In Transit  stock in MB52 is not matching with MB5T

    Hi all,
    in Transit  stock in MB52 is not matching with MB5T, is there any diffrent logic for both t code ?
    Thanks
    Niranjan

    Hi Niranjan,
    MB52 is the warehouse stock. in MB5T you will get the plant stock.
    Thank You
    Pravin

  • Stock widget does not show any numbers

    The stock widget does not show any numbers. I tried relacing the widget, just the same, no numbers

    Try restarting your Mac.

Maybe you are looking for