Batch IS-U Invoicing short dumped: Recon Key cannot tranfer to GL
Hi,
I have a situation wherein 79 out of 80 parallel IS-U batch Invoicing jobs were successful, but one short dumped.
The associated Recon Key cannot be transferred to GL because it is in ''Reserved'' state.
Any suggestion on how to overcome this would be welcome. Thanks!
Ivor
Hi Ivor,
Please look into the following thread. It was exactly similar issue.
RECON KEYS RESERVED
Thanks,
Nirmalya
Similar Messages
-
Short dump: Network Control cannot be started
Hello Everyone,
i am not sure wheter i am right or not but here is my quesion:
I am running 2SAP NetWeaver 7.01 ABAP Trial Version" on Windows XP.
I am trying to learn Data Modelling in the BW Workbench.
When I try to change a "transformation process" in theDatawarehouing Workbench: Modelling" the programm will be terminated and i get the folowing short dump:
Error analysis
Short text of error message:
Network could not be launched due to control error
Long text of error message:
Diagnosis
Network control cannot be started either because is is not installed on the front-end computer, or because the control framework is inconsistent when the function is called up. To be able to start the network graphic, you need two OCX files that are delivered with the BW Frontend.
System Response
Processing has been terminated.
Procedure
Make sure that the OCXs ICDataFlow.ocx and wdbdadpt.ocx auf are
installed on your computer. You can find notes on installing and
checking the BW Frontend by searching for SAP Notes with the
following key words:
Version, sapservX, Setup, Patch, Installation, Frontend, BW,
sapbexc.xla, checktool, wdtaocx, wdtaocx.ocx
Does anyone know a solution for this problem? How can I install the "netplan control"?
Thanks for help!
ArneI think you need to install extra BI components into your GUI.
Read,
Error with "Creating Transformation for Master Data"
and
Re: Short Dump by creating Transformation
Regards
Juan -
ABAP short dump error while creating an invoice
Hi All,
We are creating a delivery(Unit is EA) for the material for which the Unit Conversion is maintained as 1CS = 48 EA. So while creating a delivery If I maintain the delivered quantity is less than 24, I am not able to create an invoice.It's throwing an ABAP short dump error BCD zerodivide run time error.
If I deliver greater than or equal to 24, then the invoice is created without any issue
I have checked if there is any CMIR record but no record is maintained.
Can anyone help me out on this?
Regards,
ManjunathHi Manju,
Can you post the dump screen shot, which should contain the source code for that dump.
Regards,
Krishna -
Hi there,
We are currently doing an upgrade from SRM 3.0 to SRM 5.0. We initially had one backend system configured and PO's are happily replicated across to it.
We have now added a SECOND backend and now we have the following strange error scenario:
The SC is created (with a user linked to the 2nd backend) but when trying to determine the BE Purchasing Org (function BBP_PDH_PO_DET_BE_PUR_ORGS) for the PO replication etc it gets a short dump saying:
A RAISE statement in the program "SAPLBBP_ATTR_PDORG" raised the exception
condition "OBJECT_ID_NOT_FOUND".
The actual error occurs in program SAPLBBP_ATTR_PDORG and form MAP_OBJECT
So the error is occuring because it tries to run function module BBP_CENTRALPERSON_GET with user the background user WF-BATCH (for some reason).
NOTE: I have examined the short dump and it is definetly occuring AFTER mapping the SC to the PO (MAP_SHOPPING_BASKET_PO
in program SAPLBBP_PD_SC)
Why on earth would the WF-BATCH user be used at this point? We have compared the backend systems in config and cannot see anything wrong from our understanding.
So this is the call that is causing the error:
CALL FUNCTION 'BBP_CENTRALPERSON_GET'
EXPORTING
iv_username = iv_user
IMPORTING
ev_bu_partner_guid = lv_person_guid
EXCEPTIONS
OTHERS = 1.
And the value of variable "iv_user" at this point is "WF-BATCH".
Does anyone have any idea why this could be happening with the second R/3 backend?
Any help in this regard would be great appreciated.
Thanks
LyntonWell I managed to get the problem to go away but de-activating the BBP_PGRP_FIND badi implementation.
And after further tests all seems to be fine anyway.
Lynton -
Short Dump When Installing Key Figure Catalog from BI Content
Hi Friends,
I get a Short dump when trying to Install a Key Figure Catalog (in Purchasing) from the BI content. This is what the Error Says ,
" You Attempted to Use a "NULL" object reference (Points to nothing) access a component (variable : " "). An Object reference must point to an object (an instance of class ) before it can be used to access components.
Any input will be greatly appreciated,Hi Michal,
this bug hits only patch level 201 of the DBSL. Please update the DBSl.
Regarding the ABAP code I do not believe that the hint helps in this case but it should not cause any problems either. If this hint is applied more PREPARE calls are neccessary since before every execution a new statement text is assembled.
The advantage of SUBSTITUTE_VALUES hints is that the database optimizer get more information through the statement text. The downside is that a new statement is generated every time. E.g. you won't find the statement as a top scorer in a SQL cache analysis if the access plan is still bad.
Regards
Frank -
Short Dump generating reports of EWA
Hi Experts,
I get the short dump MESSAGE_TYPE_X when I tried to see the Ewa report?
Any Idea?
Thanks in advance.Hi,
Mi ST 400 level is 17.
Here is mi dump:
Err.tmpo.ejec. MESSAGE_TYPE_X
Fecha y hora 10.08.2009 09:37:50
Texto breve
The current application triggered a termination with a short dump.
¿Qué ha sucedido?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Anál.errores
Short text of error message:
La creación de evento para la sesión EA0000000000881 ha fallado
Long text of error message:
Diagnóstico
La creación de un evento ha fallado.
Actividades en el sistema
La transacción actual se cancela.
Procedimiento
Procedimiento para la gestión del sistema
El problema puede estar en el rango de números DSVASEVENT.
Verifique si el intervalo "01" está creado y si tiene números
libres. Notifique los resultados de esta exploración a SAP.
Technical information about the message:
Message class....... "DSVAS"
Number.............. 093
Variable 1.......... "EA0000000000881"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Posición desencadenante de error tiempo ejecución
Programa SAPLDSVAS_RPGEN
Include LDSVAS_RPGENU03
Línea 672
Tp.módulo (FUNCTION)
Nombre módulo DSVAS_RPGEN_REPORT_GET_DATA
Detalle código fuente
Lín. Txt.fte.
642 lf_chapno_old = 0.
643 * Fehlende Kapitelnummern verdichten
644 LOOP AT report_structure.
645 AT NEW chapter.
646 IF lf_chapno_old <> report_structure-chapter.
647 lf_chapno_old = report_structure-chapter.
648 ADD 1 TO lf_chapno.
649 ENDIF.
650 ENDAT.
651 report_structure-chapter = lf_chapno.
652 MODIFY report_structure.
653 ENDLOOP.
654
655
656 * Ereignis "Reportgeneriert" vermerken
657 DATA: ls_dsvassessinstid TYPE dsvassessinstid,
658 lf_event_parameter TYPE dsvasevent-event_parameter.
659 * AH 'SL' wird durch Aufrufer erst spaeter ausgeloest
660 if lf_iCount = 0 or sy-batch is initial.
661 ls_dsvassessinstid-sessitype = sessitype.
662 ls_dsvassessinstid-sessno = sessno.
663 lf_event_parameter = ls_dsvassessinstid.
664 CALL FUNCTION 'DSVAS_EVENT_RAISE'
665 EXPORTING
666 pf_event_type = 'SL'
667 pf_event_parameter = lf_event_parameter
668 EXCEPTIONS
669 failed = 1
670 OTHERS = 2.
671 IF sy-subrc <> 0.
>>>>> MESSAGE x093(dsvas) WITH ls_dsvassessinstid.
673 * Ereigniserzeugung für Sitzung &1 fehlgeschlagen
674 ENDIF.
675 endif.
676 * AH
677
678 CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
679 EXPORTING
680 TEXT = space.
681 ENDFUNCTION.
Thanks in advance! -
How to Fetch Cancelled Jobs info along with the Short Dump Text
Hi Gurus,
I need to develop a report to fetch the cancelled jobs information for the given period. I also need to display the "Error Analysis" part of the Short Dump if it exists.
I am able to fetch the Failed Jobs information and the Job log details using the FM "BP_JOBLOG_READ". But I need to show the "Error Analysis Text" on the report , if there is any Short Dump Exists for the Dump.
Please give me your ideas to fetch the Error Analysis part of the short dump for a given Batch Job Name.
Thanks in Advance.
Best Regards,
SumalathaThe dump information is in table SNAP. You could identify which dump you want by the date & time of the failed job - let's hope you don't have more than one dump with the same time. If it is ambiguous you could also compare the program name of the failed step with the program name in the SNAP data.
The error analysis texts are in table SNAPT keyed according to which error occurred (which is data element code FC right at the start of the first record in the SNAP data). You will have to expand out the includes, and substitute the variable codes using values from the SNAP data. There is standard code to do this that you could copy - see program SAPMS380.
To find out the details of the SAP process you could run transaction ST22 via the debugger and use the same mechanism.
best wishes
Ed
PS Note these details apply to recent systems I think there may be differences if you go back to before ?2004, but I don't have such a system so can't check. You didn't say what release you have. -
Short Dump while INSERTING to a DB Z table
There is one report that we are running in production. Earlier it was taking about 2hrs to run and now it's taking about 14-15 hours to run after we applied the Support Pack. I must agree that the report is not well written by the previous developers and I have been asked to rewrite it but in the meanwhile, they want to continue running the old one.
This report deletes all the existing records first and then updates a Z table. Last week when they tried to run the report as batch job it got cancelled after running 22000 secounds and my basis team told me that logs are getting saturated and we need to use Truncate Statement instead of DELETE from table statement and that is what I did but again when they tried running the report in production it got cancelled again and this time after 55000 secs and this time it's getting cancelled in the last step when we are inserting the records back to the table from the internal table.
So can you please tell me how can I take care of this.
My Findings:
1. Report updates a Z table for 700K records which is really not a very big size.
2. Z table size category is customized for upto 48K to 93K . Does this matter when I try to update 700K records at a time.
3. There is no foreign key relations in the Z table
4. I feel that, it could be a basis problem like, memory related. Any light on this?
5. The program currently uses INSERT statement.Can I try for a success using MODIFY statement. All validations are handled before inserting to remove the duplicates.So I dont see any issues using INSERT statement
6. Can we use a commit statement after INSERT or MODIFY?
7. From SAP help, I see that there is a limitation on the number of records can be inserted or modified. Any idea on the number?
Thanks & Best Regards,
Kiran Babu DasariDump:
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Date and Time 01/01/2009 10:17:22
Short text
SQL error in the database when accessing a table.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
How to correct the error
Database error text........: "SQL0964C The transaction log for the database is
full. SQLSTATE=57011 row=1"
Internal call code.........: "[RSQL/INSR/ZTMM_PU_FOR_BW ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"ZPMM_BWLOAD_R_V2" or "ZPMM_BWLOAD_INC02"
"FILL_ZTMM_PU_FOR_BW"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"FILL_ZTMM_PU_FOR_BW" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "ucerp13"
Network address...... "192.168.254.23"
Operating system..... "AIX"
Release.............. "5.3"
Hardware type........ "00C4B5BE4C00"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 34
Shortdump setting.... "full"
Database server... "ucerp10"
Database type..... "DB6"
Database name..... "RP1"
Database user ID.. "SAPRP1"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 700
created (date)... "Oct 26 2008 20:51:39"
create on........ "AIX 2 5 005DD9CD4C00"
Database version. "DB6_81 "
Patch level. 183
Patch text.. " "
Database............. "DB6 08.02., DB6 09."
SAP database version. 700
Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5, AIX 1 6"
Memory consumption
Roll.... 16192
EM...... 234631488
Heap.... 0
Page.... 24576
MM Used. 28706288
MM Free. 197532304
User and Transaction
Client.............. 400
User................ "BATCHUC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "49597E9619C40076E1008000C0A8FE17"
Program............. "ZPMM_BWLOAD_R_V2"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "ZPMM_BWLOAD_R_V2" - in
"FILL_ZTMM_PU_FOR_BW".
The main program was "ZPMM_BWLOAD_R_V2 ".
In the source code you have the termination point in line 2886
of the (Include) program "ZPMM_BWLOAD_INC02".
The program "ZPMM_BWLOAD_R_V2" was started as a background job.
Job Name....... "ZPMM_BWLOAD_R_V2"
Job Initiator.. "BATCHSCHED"
Job Number..... 10261500
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "FILL_ZTMM_PU_FOR_BW" "(FORM)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "ZPMM_BWLOAD_R_V2 "; its source code begins in line
2751 of the (Include program "ZPMM_BWLOAD_INC02 ".
Source Code Extract
Line
SourceCde
2856
itab_result-rec_no = recnum.
2857
ENDIF.
2858
2859
11/30/05 - Change it back after sorting
2860
IF linetype = 'AAA'.
2861
itab_result-linetype = 'INI'.
2862
ENDIF.
2863
itab_result-extractdate = e_sdate.
2864
itab_result-mandant = sy-mandt.
2865
MODIFY itab_result INDEX indx.
2866
2867
SELECT SINGLE
2868
rec_no
2869
ponumber
2870
FROM ztmm_pu_for_bw
2871
INTO CORRESPONDING FIELDS OF itab_duprec
2872
WHERE rec_no = recnum
2873
AND ponumber = pono
2874
AND linetype = linetype
2875
AND line_no = lineno
2876
AND changenr = chgno
2877
AND chgind_h = indh
2878
AND chgind_p = indp
2879
AND tblname = tbl
2880
AND fldname = fld.
2881
IF sy-subrc <> 0.
2882
MOVE-CORRESPONDING itab_result TO itab_result_bw.
2883
APPEND itab_result_bw.
2884
nrecs_results = nrecs_results + 1.
2885
>>>>>
INSERT ztmm_pu_for_bw FROM TABLE itab_result_bw.
2887
INSERT zztmm_pu_for_bw FROM TABLE itab_result_bw.
2888
2889
CLEAR itab_result_bw.
2890
REFRESH itab_result_bw.
2891
ENDIF.
2892
ENDLOOP.
2893
*change to array insert for performance
2894
INSERT ZZTMM_PU_FOR_BW FROM TABLE itab_result_bw.
2895
2896
ENDFORM. " fill_ztmm_pu_for_bw
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Load Purchasing Info. for BW Reporting
SY-MSGTY
E
SY-MSGID
TD
SY-MSGNO
600
SY-MSGV1
T710-08L04
SY-MSGV2
K01
SY-MSGV3
EN
SY-MSGV4
SY-MODNO
0
SY-DATUM
20081231
SY-UZEIT
190013
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
2 FORM ZPMM_BWLOAD_R_V2 ZPMM_BWLOAD_INC02 2886
FILL_ZTMM_PU_FOR_BW
1 EVENT ZPMM_BWLOAD_R_V2 ZPMM_BWLOAD_R_V2 192
START-OF-SELECTION
Chosen variables
Name
Val.
No. 2 Ty. FORM
Name FILL_ZTMM_PU_FOR_BW
SY
#######ৡ###################A###P#################ż#############################T#######린 u#̀##
00000000000000000000000000000000000000010000000000000000000000000000000000000000000000FB000000
000000090000000000000000000000000000000A0000000001000000000000000000000000000000000000F9000300
0000000E0000000000000000000400050000000B0000000007000000000000000000000000000105000000FB270000
0000010100000000000000000101010000000000000000040C000000000000000000000000000604000000F005000C
ITAB_RESULT_BW-WAERS
USD
00000
00000
55422
53400
ITAB_RESULT-WAERS
USD
00000
00000
55422
53400
ITAB_RESULT_BW+5358(10)
#U#C# #
0205040202
0005030000
ITAB_RESULT+4160(10)
#U#C# #
0205040202
0005030000
AMTCRCHGPOSREGUA2
00000000000
0000000000C
ITAB_RESULT_BW+5378(572)
#S#h#i#p#p#i#n#g# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
0205060607070606060202020202020202020202020202020202020202020202020202020202020202020202020202
000308090000090E070000000000000000000000000000000000000000000000000000000000000000000000000000
ITAB_RESULT+4170(572)
#S#h#i#p#p#i#n#g# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
0205060607070606060202020202020202020202020202020202020202020202020202020202020202020202020202
000308090000090E070000000000000000000000000000000000000000000000000000000000000000000000000000
C_INITIAL
@0E@
000000
000000
434422
005000
ITAB_RESULT_BW-ORT01
Cincinnati
00000000000000000000000000000000000
00000000000000000000000000000000000
46666666762222222222222222222222222
39E39EE1490000000000000000000000000
ITAB_RESULT-ORT01
Cincinnati
00000000000000000000000000000000000
00000000000000000000000000000000000
46666666762222222222222222222222222
39E39EE1490000000000000000000000000
ITAB_RESULT_BW-PSTLZ
45206
0000000000
0000000000
3333322222
4520600000
ITAB_RESULT-PSTLZ
45206
0000000000
0000000000
3333322222
4520600000
ITAB_RESULT_BW-REGIO
OH
000
000
442
F80
ITAB_RESULT-REGIO
OH
000
000
442
F80
ITAB_RESULT_BW-STRAS
2709 Woodburn Ave.
00000000000000000000000000000000000
00000000000000000000000000000000000
33332566667762476222222222222222222
270907FF4252E0165E00000000000000000
ITAB_RESULT-STRAS
2709 Woodburn Ave.
00000000000000000000000000000000000
00000000000000000000000000000000000
33332566667762476222222222222222222
270907FF4252E0165E00000000000000000
%_SPACE
0
0
2
0
ITAB_RESULT_BW+6154(4)
0202
0000
ITAB_RESULT+4908(4)
0202
0000
LW_LINES
164
000A
0004
ITAB_RESULT_BW-TELF1
961-1122
0000000000000000
0000000000000000
3332333322222222
961D112200000000
ITAB_RESULT-TELF1
961-1122
0000000000000000
0000000000000000
3332333322222222
961D112200000000
ITAB_RESULT_BW-LAND1
US
000
000
552
530
ITAB_RESULT-LAND1
US
000
000
552
530
COUNTROCHGNEGCONOVER1K2
0
0000
0000
ITAB_RESULT_BW+6158(337)
#0#3#6#0#-#0#0# # # # # # # # # # # # # #M#R#O# #&# #C#o#n#s#t#r#u#c#t#i#o#n#A#t#h#l#e#t#i#c
0203030303020303020202020202020202020202020405040202020406060707070706070606060407060606070606
00000306000D0000000000000000000000000000000D020F000600030F0E030402050304090F0E0104080C05040903
ITAB_RESULT+4950(337)
#0#3#6#0#-#0#0# # # # # # # # # # # # # #M#R#O# #&# #C#o#n#s#t#r#u#c#t#i#o#n#A#t#h#l#e#t#i#c
0203030303020303020202020202020202020202020405040202020406060707070706070606060407060606070606
00000306000D0000000000000000000000000000000D020F000600030F0E030402050304090F0E0104080C05040903
ITAB_CHGLOG[]
Table IT_33[587x1576]
\PROGRAM=ZPMM_BWLOAD_R_V2\DATA=ITAB_CHGLOG[]
Table reference: 25
TABH+ 0(20) = 070000009070DB38000000000000000000000000
TABH+ 20(20) = 00000019000000210000024B00000628FFFFFFFF
TABH+ 40(16) = 040000000000149000082C9401800000
store = 0x070000009070DB38
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 25 (0x00000019)
label = 33 (0x00000021)
fill = 587 (0x0000024B)
leng = 1576 (0x00000628)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000095
occu = 8 (0x00000008)
access = 1 (ItAccessStandard)
idxKind = 1 (ItIndexLinear)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000A0E13E70
pgHook = 0x07000000B2EBC728
idxPtr = 0x07000000906BA5E0
shmTabhSet = 0x0000000000000000
id = 32 (0x00000020)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 1024 (0x00000400)
lineAlloc = 592 (0x00000250)
shmVersId = 0 (0x00000000)
shmRefCount = 469 (0x000001D5)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
ITAB_RESULT_BW+3592(1026)
0202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ITAB_RESULT+5798(1026)
0202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ITAB_RESULT_BW-MANDANT
400
000
000
333
400
ITAB_RESULT-MANDANT
400
000
000
333
400
AMTTCCHGPOSREGST2
00000000000
0000000000C
ITAB_RESULT_BW[]
Table IT_132[1x6760]
\PROGRAM=ZPMM_BWLOAD_R_V2\DATA=ITAB_RESULT_BW[]
Table reference: 51
TABH+ 0(20) = 07000000A9A1FEA8000000000000000000000000
TABH+ 20(20) = 00000033000000840000000100001A68FFFFFFFF
TABH+ 40(16) = 0400000000003140000224C401800000
store = 0x07000000A9A1FEA8
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 51 (0x00000033)
label = 132 (0x00000084)
fill = 1 (0x00000001)
leng = 6760 (0x00001A68)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000248
occu = 2 (0x00000002)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x07000000A283E980
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 141 (0x0000008D)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 2 (0x00000002)
lineAlloc = 2 (0x00000002)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x00000001)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
ITAB_RESULT_BW
400##͒4500034945
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000030000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
3330053333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
4000024500034945000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
0000
0000
2222
0000
COUNTTCCHGNEGCONST3
0
0000
0000
<%_TABLE_ZTMM_PU_FOR_BW>
AMTTOTAL3
00000000000
0000000000C
No. 1 Ty. EVENT
Name START-OF-SELECTION
T023T
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T024
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
T161
00000 00000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222223333322222222222222222222222222222222222333332222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TWLAD
000000000000000000000000
000000000000000000000000
222222222222222222222222
000000000000000000000000
ZTMM_BOA
0000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222223333333333333333222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ZTMM_PU_FOR_BW
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2220002222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ZTPU_DOCTYPE
0000000000000000000000000000000000
0000000000000000000000000000000000
2222222222222222222222222222222222
0000000000000000000000000000000000
USR02
####0000000000000000 # 000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222220000333333333333333322222222222220222222222222222222222222333333333333333333333
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SSCRFIELDS
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_BLUESQUAREX
@3X@
000000
000000
435422
038000
Internal notes
The termination was triggered in function "HandleRsqlErrors"
of the SAP kernel, in line 786 of the module
"//bas/700_REL/src/krn/runt/absapsql.c#11".
The internal operation just processed is "SQLS".
Internal mode was started at 20081231190002.
Internal call code.........: "[RSQL/INSR/ZTMM_PU_FOR_BW ]"
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x11c0f5d60
=> Stack address = 0xfffffffffff8040
=> Stack low = 0xfffffffffff8040
=> Stack high = 0xffffffffffff800
=> Stack Trace:
AixStack() at 0x1000c945c
CTrcStack2() at 0x1000c9554
rabax_CStackSave__Fv() at 0x1000b3ee0
ab_rabax() at 0x1000b0628
ab_rsqlerr__FPCUsiT1P11RS_HEADER94T1Pv() at 0x10058c010
HandleRsqlErrors__F9RsqlError9CloseMode() at 0x1017f1e94
SqlsExecuteCall__FUcP11DynCallInfo() at 0x1017efc68
ab_jsqls__Fv() at 0x1017ea82c
ab_extri__Fv() at 0x100419ca0
ab_xevent__FPCUs() at 0x10094e47c
ab_trigg__Fv() at 0x10094e168
ab_run() at 0x1011aabb8
N_ab_run() at 0x100f6edc0
dynpmcal() at 0x100f6d9c4
dynppai0() at 0x100f6b2c8
dynprctl() at 0x100f7375c
dynpen00() at 0x100f6761c
Thdynpen00() at 0x1000e3c6c
TskhLoop() at 0x1000e5b64
ThStart() at 0x1001000c0
DpMain() at 0x101301d34
nlsui_main() at 0x101abea68
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
ZPMM_BWLOAD_R_V2
0
12/31/2008
10:10:08
409600
E
1
Prg
SAPMSSY0
1
05/30/2008
12:59:05
92160
E
2
Prg
SAPMSSYD
1
08/16/2006
12:06:37
21504
E
3
Prg
SAPFSYSCALLS
1
09/09/2004
14:18:32
7168
E
4
Prg
RSDBRUNT
0
12/13/2008
02:15:03
254976
E
5
Prg
SAPLSPRI
5
12/13/2008
02:14:06
342016
E
6
Typ
PRI_PARAMS
0
11/02/1998
09:46:12
5120
7
Typ
ARC_PARAMS
0
08/28/1997
08:36:28
6144
8
Typ
PRI_LAYOUT
0
11/06/2003
20:30:04
2048
9
Typ
PRIPAR_EXT
0
05/18/2004
14:07:03
3072
10
Typ
PRIPAR_EX2
0
11/09/2000
14:10:39
2048
11
Typ
PRIPAR_EX3
0
05/18/2004
14:07:03
5120
12
Typ
TPRI_DEF
0
11/09/2000
14:24:28
5120
13
Typ
USR01
0
05/30/2008
19:06:47
4096
14
Typ
TSP1D
0
11/15/2000
17:58:02
5120
15
Prg
SAPLSPOO
15
12/13/2008
02:14:06
160768
E
16
Prg
SAPLRSPOLSTDRV
16
12/13/2008
02:13:54
58368
E
17
Typ
TSPOPTIONS
0
01/29/1997
19:13:56
2048
18
Typ
TSP03
0
11/02/1998
09:57:05
5120
19
Typ
TSP0A
0
11/15/2000
17:58:02
6144
20
Typ
TSP03C
0
11/21/2003
11:41:10
7168
21
Typ
TSP03T
0
03/23/1998
18:21:38
6144
22
Typ
TSP06A
0
11/15/2000
17:58:02
7168
23
Prg
SAPCNVE
23
09/09/2004
14:36:10
8192
E
24
Prg
SAPLSPOC
24
12/13/2008
02:15:07
137216
E
25
Typ
TSP03L
0
07/10/1997
00:46:18
2048
26
Typ
RSPOCHECK
0
08/13/1997
12:53:10
4096
27
Typ
TSP03A
0
07/10/1997
00:46:15
3072
28
Prg
SAPLSPOR
28
12/13/2008
02:15:07
39936
E
29
Prg
SAPLSPOB
29
05/30/2008
09:36:14
67584
E
30
Prg
SAPLSDEX
30
09/09/2004
14:20:42
22528
E
31
Typ
DD07T
0
05/30/2008
00:38:18
3072
32
Typ
DEVPAR
0
12/04/2000
12:46:11
3072
33
Typ
RSPOATTR
0
11/10/1999
17:44:19
2048
34
Typ
RSSCR
0
03/30/2005
10:21:45
5120
35
Prg
RSDBSPBL
0
03/30/2005
10:21:58
72704
E
36
Prg
SAPDB__S
0
03/30/2005
10:22:01
19456
E
37
Typ
VARID
0
05/12/1997
16:51:30
4096
38
Typ
SSCRFIELDS
0
05/13/1997
12:54:26
5120
39
Prg
%_CSYDB0
0
03/30/2005
10:21:45
35840
E
40
Prg
RSDBSPVA
0
12/13/2008
02:15:03
133120
E
41
Typ
RSVAMEMKEY
0
05/07/1997
13:07:49
5120
42
Prg
RSDBSPMC
0
08/16/2006
11:55:58
79872
E
43
Typ
DDSHDESCR
0
09/03/1997
03:05:16
4096
44
Typ
SPPARAMS
0
05/07/1997
13:10:38
2048
45
Prg
SAPLICON
45
05/30/2008
13:22:44
27648
E
46
Prg
%_CICON
45
05/30/2008
13:22:44
107520
E
47
Typ
ICONT
0
08/16/2006
11:55:57
2048
48
Prg
SAPLSABE
48
09/09/2004
14:18:36
12288
E
49
Prg
SAPLSECU
49
05/30/2008
11:07:13
87040
E
50
Typ
RSSUBINFO
0
10/14/1999
22:01:03
2048
51
Typ
RSEXFCODE
0
08/13/1997
12:52:57
2048
52
Prg
SAPLDSYA
52
05/30/2008
12:53:05
45056
E
53
Prg
SAPFSDS1
52
03/30/2005
10:22:01
52224
E
54
Typ
TDCLD
0
11/02/1998
09:51:35
6144
55
Prg
SAPLSDOD
55
01/25/2006
10:59:45
45056
E
56
Typ
DOKIL
0
05/12/1997
16:46:17
3072
57
Prg
SAPLLANG
57
09/09/2004
14:18:35
10240
E
58
Typ
T002
0
05/30/2008
00:53:58
2048
59
Prg
SAPFSPOR
0 -
Short dump:ASSIGN_TYPE_CONFLICT- While loading data through DTP
Dear all:
We currently work with BI NW2004s SP10. We created transformation for mapping InfoSource and InfoCube based on 3.x transfer rule. For example, we used cube 0PUR_C04 and Data Source 2LIS_02_ITM_CP. And the transformation is "TRCS Z2LIS_02_ITM_CP -> CUBE 0PUR_C04". Everytime when we tried to load data via DTP. A runtime short dump occurred: ASSIGN_TYPE_CONFLICT
Error analysis:
You attempted to assign a field to a typed fie but the field does not have the required type.
we went back and forth to activated transformation and DTP. But still, same error occurred.
Any idea, please !!!!
BR
SzuFenHi Pavel:
Please refer to the following information-
User and Transaction
Client.............. 888
User................ "TW_S
Language key........ "E"
Transaction......... " "
Program............. "GPD0
Screen.............. "SAPM
Screen line......... 6
===========================================================
Information on where terminated
Termination occurred in the ABAP program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" - in
"EXECUTE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 704
of the (Include) program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
The program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" was started as a background job.
Job Name....... "BIDTPR_284_1"
Job Initiator.. "TW_SZU"
Job Number..... 16454800
===========================================================
Short text
Type conflict with ASSIGN in program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
===========================================================
Error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
===========================================================
Information on where terminated
Termination occurred in the ABAP program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" - in
"EXECUTE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 704
of the (Include) program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
The program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" was started as a background job.
Job Name....... "BIDTPR_284_1"
Job Initiator.. "TW_SZU"
Job Number..... 16454800
===========================================================
Line SourceCde
674 ELSE.
675 ASSIGN rdsTG_1->* to <_ys_TG_1>.
676 CLEAR <_ys_TG_1>.
677 MOVE-CORRESPONDING G1 TO <_ys_TG_1>.
678 <_ys_TG_1>-requid = l_requid.
679 l_recno_TG_1 = l_recno_TG_1 + 1.
680 ls_cross-insegid = 1.
681 ls_cross-inrecord = l_recno_SC_1.
682 ls_cross-outsegid = 1.
683 ls_cross-outrecord = l_recno_TG_1.
684
685 CALL METHOD i_r_log->add_cross_tab
686 EXPORTING
687 I_S_CROSSTAB = ls_cross.
688
689 ** Record# in target = sy-tabix - if sorting of table won't be changed
690 <_ys_TG_1>-record = l_recno_TG_1.
691 INSERT <_ys_TG_1> INTO TABLE <_yth_TG_1>.
692 IF sy-subrc <> 0.
693 CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack.
694 ENDIF.
695
696 ENDIF. "Read table
697 *
698 ENDIF.
699 CLEAR skipseg_all.
700 ENDLOOP.
701 * -
insert table into outbound segment -
702
703 <_yt_TG_1>[] = <_yth_TG_1>[].
>>>>>
705 rTG_1->insert_table( rdtTG_1_dp ).
706 ENDMETHOD. "execute
707
708
709
710 endclass. "lcl_transform IMPLEMENTATION
711
712 &----
713 *& Form get_runtime_ref
714 &----
715 * text
716 ----
717 * -->C_R_EXE text
718 ----
719 form get_runtime_ref
720 changing c_r_exe type ref to object.
721
722 data: l_r_exe type ref to lcl_transform.
723 create object l_r_exe.
===========================================================
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 3
SY-TABIX 0
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Batch Process
SY-MSGTY E
SY-MSGID R7
SY-MSGNO 057
SY-MSGV1 0TOTDELTIME
SY-MSGV2 A
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20070420
SY-UZEIT 164557
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
===========================================================
Active Calls/Events
No. Ty. Program Include
Name
6 METHOD GPD0QBVJ2WFQZZXBD0IJ1DSZAEL GPD0QBVJ2WFQZZXBD0IJ1DSZAEL
LCL_TRANSFORM=>EXECUTE
5 METHOD CL_RSTRAN_TRFN_CMD============CP CL_RSTRAN_TRFN_CMD============CM005
CL_RSTRAN_TRFN_CMD=>IF_RSBK_CMD_T~TRANSFORM
4 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM00Q
CL_RSBK_PROCESS=>PROCESS_REQUEST
3 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM002
CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~EXECUTE
2 FUNCTION SAPLRSBATCH LRSBATCHU13
RSBATCH_EXECUTE_PROCESS
1 EVENT RSBATCH_EXECUTE_PROZESS RSBATCH_EXECUTE_PROZESS
START-OF-SELECTION
===========================================================
Thank you and BR
SF -
Short Dump DATA_OFFSET_TOO_LARGE in dialog instance
Hi,
We recently install a Dialog Instance for our production system (ECC 5.0), and we received the Short Dump DATA_OFFSET_TOO_LARGE only in our Dialog Instance, in our Central Instance the error does not occur. This is the error:
Runtime Error DATA_OFFSET_TOO_LARGE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
Date and Time 30.03.2007 08:19:13
ShrtText
Invalid partial field access: Offset too large
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSNR3" had to be terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_RANGE_OUT_OF_BOUNDS', was neither caught nor passed along using a RAISING clause, in the procedure "NUMBER_GET_NEXT" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception to occur, the running program was terminated.
The reason for the exception is:
The system tried to access field "Z_DB_GROUP_KEY" with type "C" and length 20 in the current program "SAPLSNR3" using offset 20.
Partial field access is not allowed with an offset specification that is larger than actual field length.
How to correct the error
Make the offset smaller with which you want to access the field.
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
"DATA_OFFSET_TOO_LARGE" CX_SY_RANGE_OUT_OF_BOUNDSC
"SAPLSNR3" or "LSNR3U01"
"NUMBER_GET_NEXT"
User and Transaction
Client.............. 300
User................ 645
Language key........ "S"
Transaction......... "FNV5 "
Program............. "SAPLSNR3"
Screen.............. "SAPLFVDA 0400"
Screen line......... 323
Information on where terminated
The termination occurred in the ABAP program "SAPLSNR3" in "NUMBER_GET_NEXT".
The main program was "SAPMF67A ".
The termination occurred in line 99 of the source code of the (Include)program "LSNR3U01"
of the source code of program "LSNR3U01" (when calling the editor 990).
Error occurred during batch input processing
Processing was terminated because the exception "CX_SY_RANGE_OUT_OF_BOUNDS" occurred in the procedure "NUMBER_GET_NEXT" "(FUNCTION)" but was not handled locally, not declared in the RAISING clause of the procedure.
The procedure is in the program "SAPLSNR3 ". Its source code starts in line 5
of the (Include) program "LSNR3$01 ".
Our Database is DB2 UDB with FixPak 10, the Central Instance is on Solaris 9 and our Dialog Instance is on Linux Red Hat. Both instances have the same Kernel release (155) installed.
Can you help me please?
Best Regards,
Eduardo Perez.Hi Eduardo,
Just refresh the number range buffers in both instances and see what happens.
Go to SM56. From menu bar choose number range buffer. Choose client as as current client. Check the checkbox global reset. press enter.
There is one more thing you can check before buffer refresh. Look out for the number range object being used.
Then check it in SNRO txn. There you will find the transaction for maintaining the number range object intervals. GO to that transaction in both the instances and display the intervals. You will find discprency between the two instances.Though it is not very critical in case ur not able to find the number range object.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu -
Short dump while creating a plant.
Dear experts,
Iam getting a short dump whenever I try to create a plant and save it. Iam posting the contents of the dump ... Iam using Ecc 6.0 with Oracle as database. Kindly help me to resolve this ...
Runtime Errors RAISE_EXCEPTION
Date and Time 27.10.2007 17:10:59
Short text
Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "DATA_INCONS_IN_EXIT_MANAGEM".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "DATA_INCONS_IN_EXIT_MANAGEM"
or
"SAPLS_IMG_TOOL_5 " "DATA_INCONS_IN_EXIT_MANAGEM"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "BSLERP"
Network address...... "10.60.0.30"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "BSLERP"
Database type..... "ORACLE"
Database name..... "BTS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 17768808
Heap.... 0
Page.... 65536
MM Used. 12293456
MM Free. 1291704
User and Transaction
Client.............. 800
User................ "MURTHYTSN"
Language key........ "E"
Transaction......... "SPRO "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPLSZA1 0201"
Screen line......... 70
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 36
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
6
type_ref TYPE REF TO cl_abap_typedescr,
7
class_name TYPE seoclsname,
8
abs_type_classname TYPE string,
9
def_impl TYPE seex_boolean VALUE seex_false,
10
mig_enhspotname TYPE enhspotname,
11
is_impl TYPE enhboolean,
12
mig_badi_name TYPE enhbadiid.
13
14
CALL METHOD cl_exithandler=>get_class_name_by_interface
15
EXPORTING
16
instance = instance
17
IMPORTING
18
class_name = class_name
19
CHANGING
20
exit_name = exit_name
21
EXCEPTIONS
22
no_reference = 1
23
no_interface_reference = 2
24
no_exit_interface = 3
25
data_incons_in_exit_managem = 4
26
class_not_implement_interface = 5
27
OTHERS = 6.
28
CASE sy-subrc.
29
WHEN 1.
30
RAISE no_reference.
31
WHEN 2.
32
RAISE no_interface_reference.
33
WHEN 3.
34
RAISE no_exit_interface.
35
WHEN 4.
>>>>>
RAISE data_incons_in_exit_managem.
37
WHEN 5.
38
RAISE class_not_implement_interface.
39
ENDCASE.
40
41
CONCATENATE '\CLASS=' class_name INTO abs_type_classname.
42
43
Is the given instance initial?
44
IF NOT instance IS INITIAL.
45
CALL METHOD cl_abap_typedescr=>describe_by_object_ref
46
EXPORTING
47
p_object_ref = instance
48
RECEIVING
49
p_descr_ref = type_ref.
50
CHECK type_ref->absolute_name NE abs_type_classname.
51
ENDIF.
52
53
SELECT SINGLE mig_enhspotname mig_badi_name FROM sxs_attr INTO (mig_enhspotname,mig_badi_n
54
WHERE exit_name = exit_name.
55
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
ADDR0200
SY-UCOMM
CHCK
SY-TITLE
Edit address: 5002
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20071024
SY-UZEIT
171059
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
43 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 36
CL_EXITHANDLER=>GET_INSTANCE
42 FUNCTION SAPLXSZAR ZXSZARU01 25
EXIT_SAPLSZAR_001
41 FUNCTION SAPLSZAR LSZARU01 108
ADDR_REGIONAL_DATA_CHECK
40 FORM SAPLSZA2 LSZA2F20 382
CHECK_ADDR1_DATA
39 FUNCTION SAPLSZA2 LSZA2U02 42
ADDR_CHECK
38 FUNCTION SAPLSZA0 LSZA0U01 79
ADDR_INSERT
37 FORM SAPLSZA1 LSZA1F22 1886
INSERT_ADDRESS_INTO_MEMORY
36 FORM SAPLSZA1 LSZA1F22 2234
PUT_ADDRESS_TO_MEMORY
35 FORM SAPLSZA1 LSZA1I02 409
D0100_OK_CODE
34 FORM SAPLSZA1 LSZA1F03 17
D0100_OK_CODE_WRAPPER
33 MODULE (PAI) SAPLSZA1 LSZA1I02 13
D0100_OK_CODE
32 FUNCTION SAPLSZA1 LSZA1U01 200
ADDR_DIALOG_INTERN
31 FUNCTION SAPLSZA1 LSZA1U05 177
ADDR_DIALOG
30 FORM SAPL0ORG LSVIMF24 292
ADDRESS_MAINTAIN
29 FORM SAPL0ORG LSVIMFX2 577
DETAIL_PAI
28 MODULE (PAI) SAPL0ORG LSVIMIXX 354
DETAIL_PAI
27 FORM SAPL0ORG LSVIMF2L 337
CALL_DYNPRO
26 FUNCTION SAPL0ORG L0ORGU34 35
VIEWPROC_V_T001W
25 FUNCTION SAPL0ORG L0ORGU33 49
VIEWFRAME_V_T001W
24 FUNCTION SAPLSVIM LSVIMU01 138
VIEW_MAINTENANCE
23 FUNCTION SAPLSVIM LSVIMU03 427
VIEW_MAINTENANCE_CALL
22 FORM SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYF01 358
START_SELECTED_TRANSACTION
21 MODULE (PAI) SAPLDSYH LDSYHI12 56
D1200_PAI_MODULE
20 FUNCTION SAPLDSYH LDSYHU11 70
OUTLINE_LIST_TCODES
19 FUNCTION SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYU07 103
S_CUS_ACTIVITY_EXECUTE
18 FUNCTION SAPLS_CUS_IMG_ACTIVITY LS_CUS_IMG_ACTIVITYU04 35
S_CUS_IMG_ACTIVITY_EXECUTE
17 FUNCTION SAPLS_IMG_TOOL_1 LS_IMG_TOOL_1U02 63
STREE_EXIT_TO_OBJECT_COBJ
16 FUNCTION SAPLSHI1 LSHI1U16 120
STREE_EXIT_TO_OBJECT
15 FORM SAPLSHI01 LSHI01F0Y 185
EXIT_TO_OBJECT_HC
14 FORM SAPLSHI01 LSHI01F05 70
HANDLE_LINK_CLICK
13 METHOD SAPLSHI01 LSHI01CI1 25
LCL_APPLICATION=>HANDLE_LINK_CLICK
12 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM013 53
CL_ITEM_TREE_CONTROL=>HANDLE_NODE_KEY_ITEM_NAME_EVT
11 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM00S 60
CL_ITEM_TREE_CONTROL=>HANDLE_EVENT
10 METHOD CL_GUI_COLUMN_TREE============CP CL_GUI_COLUMN_TREE============CM01O 15
CL_GUI_COLUMN_TREE=>HANDLE_EVENT
9 METHOD CL_TREE_CONTROL_BASE==========CP CL_TREE_CONTROL_BASE==========CM017 32
CL_TREE_CONTROL_BASE=>DISPATCH
8 METHOD CL_GUI_CFW====================CP CL_GUI_CFW====================CM001 138
CL_GUI_CFW=>DISPATCH
7 FORM SAPLSHI01 LSHI01F1M 17
EXECUTE_USER_COMMAND_W_EXITS
6 FUNCTION SAPLSHI01 LSHI01U12 30
STREE_BROWSER_PAI
5 MODULE (PAI) SAPLSHI01 LSHI01I01 55
PAI_200
4 FUNCTION SAPLSHI01 LSHI01U07 165
STREE_BROWSER_DYNP_HC
3 FUNCTION SAPLSHI21 LSHI21U03 144
STREE_EXTERNAL_DISPLAY
2 FORM SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5F01 20
DISPLAY_REFERENCE_IMG
1 MODULE (PAI) SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5I01 39
USER_COMMAND_0100
Chosen variables
Name
Val.
No. 43 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
22222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
CL_DRAGDROP=>COPY
1
0000
1000
CL_WB_REQUEST=>TO_IMMEDIATE_START
SY-SUBRC
4
0000
4000
CL_DRAGDROP=>USEDEFAULTEFFECT
4
0000
4000
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_GUI_CONTROL=>LIFETIME_DEFAULT
0
0000
0000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ABS_TYPE_CLASSNAME
No. 42 Ty. FUNCTION
Name EXIT_SAPLSZAR_001
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
\FUNCTION-POOL=SZA1\FORM=INSERT_ADDRESS_INTO_MEMORY\DATA=ERROR_TABLE[]
Table reference: 208
TABH+ 0(20) = 00000000F8EB2E3D00000000D0000000FB080000
TABH+ 20(20) = 000000003C020000FFFFFFFF04A90100303E0000
TABH+ 40( 8) = 10000000C1248001
store = 0x00000000
ext1 = 0xF8EB2E3D
shmId = 0 (0x00000000)
id = 208 (0xD0000000)
label = 2299 (0xFB080000)
fill = 0 (0x00000000)
leng = 572 (0x3C020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000317
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xD09AD03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x30F18E3D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
000000000000000000000000000000
000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
0
0
SY-REPID
SAPLXSZAR
5454555452222222222222222222222222222222
310C83A120000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LR_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
Y_ERROR_TABLE
Table[initial]
No. 41 Ty. FUNCTION
Name ADDR_REGIONAL_DATA_CHECK
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
X_T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_REGIO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LV_MAND
C
422
300
000
000
SY-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
%_CX_GRID_ID
1
0000
1000
SYST-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SV_THERE_IS_CUST_EXIT
X
5
8
0
0
T005S
22222222222222
00000000000000
00000000000000
00000000000000
T005
00 000 00 00 00 00 0000 00 000 000
2222222223322222222222222222233322233233233222332223333233222222222222233322222223332222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CO_ERROR
E
4
5
0
0
No. 40 Ty. FORM
Name CHECK_ADDR1_DATA
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
FIELDNAME
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
C_NULL
0
0000
0000
RETURNCODE_ERRORS
2
0
0
0
C_ERROR_OCCURRED
E
4
5
0
0
H_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDR1_DATA+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
H_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_COMM_TTX
TTX
555
448
000
000
NATION
2
0
0
0
G_ACCEPT_ERROR
2
0
0
0
G_DIALOG_ALLOWED
X
5
8
0
0
T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TSAD6T
222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
ERROR_TABLE[]
Table IT_2299[0x572]
%_SPACE
2
0
0
0
No. 39 Ty. FUNCTION
Name ADDR_CHECK
ADDRESS_HANDLE
8005002
3333333222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
8005002000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_NUMBER
2222222222
0000000000
0000000000
0000000000
ADDRESS_OBJECT_TYPE
1
3
1
0
0
NATION
2
0
0
0
RETURNCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
ADDRESS_DATA_1
00000000000000000003XYZ SOLUTIONS LIMITED
3333333333333333333355525445544452444454422222222222222222222222222222222222222222222222222222
0000000000000000000389A03FC549FE30C9D945400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_2
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_3
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_1+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_HANDLE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ERROR_TABLE
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_NATION
2
0
0
0
C_SHOW_ALL
2
0
0
0
C_PERSONAL_ADDRESS
2
3
2
0
0
SY-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ADDRESS_DATA_2+32(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 38 Ty. FUNCTION
Name ADDR_INSERTDear Sunil,
Thanks a lot for your reply. I did search in service market place for notes regarding this problem. However, i could not find possible solutions to resolve this. I will once again search the notes in case if i have missed something. in case, if you come across any solutions to resolve this problem, Kindly post that here and that would be a great help for me.
Regards,
Chaitanya -
Short Dump on BAPI_TRANSACTION_COMMIT with destination NONE
Hi All
I am using SAP-PM with Compatible Unit(CU) functionality in ECC6 environment.
After we release the CU design to Generate order we get SHORT DUMP.
Any help will be of great help.
I am pasting the details from the dump file here.
Please let me know.
Appretaite your help.
Thanks
Meghana
Runtime Errors CALL_FUNCTION_REMOTE_ERROR
Date and Time 27.08.2007 18:01:10
Short text
"The current application triggered a termination with a short dump."
What happened?
Error in the ABAP Application Program
The current ABAP program "/***/SAPLCUORDER_N" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
The error occurred during an RFC call to another system.
In the target system, a short dump has been written as well.
More detailed information on the error cause can be found there.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "MESSAGE_TYPE_X"
on the called page.
How to correct the error
Please refer to the notes described in the
short dump.
System environment
SAP-Release 700
Application server... "MB1ES1005"
Network address...... "10.191.97.206"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "MB1ES1005"
Database type..... "ORACLE"
Database name..... "EC6"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jul 25 2007 00:57:05"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 121
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8176
EM...... 14633136
Heap.... 0
Page.... 131072
MM Used. 5005432
MM Free. 1263944
User and Transaction
Client.............. 200
User................ 10086330
Language key........ "E"
Transaction......... "/***/DESIGN "
Transactions ID..... "409954DC5D77F1C58E2D0013725D3B3B"
Program............. "/***/SAPLCUORDER_N"
Screen.............. "/***/SAPLCUORDER_N 2000"
Screen line......... 34
Information on where terminated
Termination occurred in the ABAP program "/***/SAPLCUORDER_N" - in
"SAVE_DESIGN".
The main program was "/***/SAPLCUORDER_N ".
In the source code you have the termination point in line 594
of the (Include) program "/***/LCUORDER_NF07".
Source Code Extract
Line
SourceCde
564
ENDIF .
565
ENDLOOP .
566
IF l_ret-type = 'E' OR
567
l_ret-type = 'A' .
568
CLEAR: save_okcode .
569
570
Show Messages
571
CALL FUNCTION '/***/N_LOG_ADD_MSG'
572
EXPORTING
573
i_log_type = 'G'
574
TABLES
575
t_ret = t_ret.
576
PERFORM log_order_create_show .
577
Show first Message
578
MESSAGE ID l_ret-id TYPE l_ret-type NUMBER l_ret-number
579
WITH
580
l_ret-message_v1 l_ret-message_v2
581
l_ret-message_v3 l_ret-message_v4.
582
CALL FUNCTION '/***/N_DESIGN_INIT' .
583
ELSE .
584
IF g_design_mode = con_mode_crea.
585
Need to update DMS documents with real design number
586
PERFORM document_prepare_002 USING con_desnum_tmp_1
587
lv_desnum.
588
ENDIF.
589
Commit design BAPI's
590
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
591
592
IF save_okcode = con_order.
593
Commit order BAPI's
>>>>>
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
595
DESTINATION 'NONE'.
596
597
call of fct. RFC_CONNECTION_CLOSE is important to get a new
598
initial roll area with initial internal tables next time
599
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
600
EXPORTING
601
destination = 'NONE'
602
EXCEPTIONS
603
destination_not_open = 1
604
OTHERS = 2.
605
ENDIF.
606
607
IF lv_desnum IS INITIAL .
608
lv_desnum = /***/cudesign-desnum .
609
ENDIF .
610
SET PARAMETER ID '/***/DESNUM' FIELD lv_desnum .
611
Changes saved
612
MESSAGE ID '/***/MSG' TYPE 'S' NUMBER '529' WITH lv_desnum .
613
ENDIF .
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
2000
SY-UCOMM
CU01
SY-TITLE
Change Design: 50000109
SY-MSGTY
X
SY-MSGID
00
SY-MSGNO
341
SY-MSGV1
MESSAGE_TYPE_X
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070827
SY-UZEIT
180110
SY-XPROG
SAPMSSY1
SY-XFORM
XAB_READ
Active Calls/Events
No. Ty. Program Include Line
Name
4 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF07 594
SAVE_DESIGN
3 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF07 2616
CHECK_AND_SAVE_F07
2 FORM /***/SAPLCUORDER_N /***/LCUORDER_NF04 311
USER_COMMAND_D2000
1 MODULE (PAI) /***/SAPLCUORDER_N /***/LCUORDER_NI05 28
USER_COMMAND_2000
Chosen variables
Name
Val.
No. 4 Ty. FORM
Name SAVE_DESIGN
%_DUMMY$$
2222
0000
0000
0000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
G_DESIGN_MODE
R
5
2
0
0
CON_MODE_CREA
I
4
9
0
0
GT_NODE_CUI
Table[initial]
SY-REPID
/***/SAPLCUORDER_N
2454254544545445542222222222222222222222
F35DF310C35F2452FE0000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_DESNUM_TMP_1
TM00000001CY
543333333345
4D0000000139
000000000000
000000000000
LV_DESNUM
222222222222
000000000000
000000000000
000000000000
SAVE_OKCODE
CU01
4533222222222222222222222222222222222222222222222222222222222222222222
3501000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
CON_ORDER
CU01
4533222222222222222222222222222222222222222222222222222222222222222222
3501000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
SY-XPROG
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_DELETE
LVMS
4545222222222222222222222222222222222222222222222222222222222222222222
C6D3000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
No. 3 Ty. FORM
Name CHECK_AND_SAVE_F07
CL_GUI_ALV_GRID=>MC_MB_VIEW
&MB_VIEW
2445544522222222222222222222222222222222222222222222222222222222222222
6D2F695700000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
GT_OP
Table IT_303[2x1320]
PROGRAM=/***/SAPLCUORDER_NDATA=GT_OP
Table reference: 118
TABH+ 0(20) = 7039FC3C5824DB3C00000000760000002F010000
TABH+ 20(20) = 0200000028050000FFFFFFFF0400000030140000
TABH+ 40( 8) = 08000000C1308001
store = 0x7039FC3C
ext1 = 0x5824DB3C
shmId = 0 (0x00000000)
id = 118 (0x76000000)
label = 303 (0x2F010000)
fill = 2 (0x02000000)
leng = 1320 (0x28050000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000093
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x2010FC3C
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 234 (0xEA000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 8 (0x08000000)
lineAlloc = 8 (0x08000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x60B7153D
collHook = 0x00000000
ext2 = 0x1024DB3C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xE00FFC3C
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
G_BADI_PROGRAM
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LOG_ERROR
2
0
0
0
CON_BUTT_DELETED
@11QDelete@
43355466676422222222222222222222222222222222
011C145C545000000000000000000000000000000000
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
G_CU_EXIT_CU_EXPLODE
F0000000
F0000000
/***/CUDESIGN-OBJNR
CY00000000000000008835
4533333333333333333333
3900000000000000008835
0000000000000000000000
0000000000000000000000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
G_SEC_COUNT
0
0000
0000
LV_UPD
X
5
8
0
0
%_SPACE
2
0
0
0
GS_ROW_NO
0.0.0.1.
0000
1000
0000
0000
SCREEN
/***/CUDESIGN-GLTRP
2454245445444244555222222222222222222222222222222222222222222222222222222222222222222222222222
F35DF3545397ED7C420000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGID
00
33222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
SWO_%CONTAINER
000000000
2222222222222222222222222222222233333333322222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
0
0
SY-MSGNO
341
333
341
000
000
/***/CVCUI-CUTYP
2
0
0
0
SY-MSGV1
MESSAGE_TYPE_X
44554445555455222222222222222222222222222222222222
D533175F4905F8000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
No. 2 Ty. FORM
Name USER_COMMAND_D2000
/***/CVCUI
0.0.0.0.0.0.0.1. 000000
2220000000022222222222222222222222222222222222222222222222222222222222222222222222223333332222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
/***/SAPLCUORDER_N
2454254544545445542222222222222222222222
F35DF310C35F2452FE0000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CON_MODE_COPY
C
4
3
0
0
LT_BAPI_RETURN
Table IT_1778[2x1088]
PROGRAM=/***/SAPLCUORDER_NFORM=USER_COMMAND_D2000DATA=LT_BAPI_RETURN
Table reference: 310
TABH+ 0(20) = 8837083D407E1C3D0000000036010000F2060000
TABH+ 20(20) = 0200000040040000FFFFFFFF04000000F0170000
TABH+ 40( 8) = 08000000C1308101
store = 0x8837083D
ext1 = 0x407E1C3D
shmId = 0 (0x00000000)
id = 310 (0x36010000)
label = 1778 (0xF2060000)
fill = 2 (0x02000000)
leng = 1088 (0x40040000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000113
occu = 8 (0x08000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
groupCntl = 0
rfc = 1
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x50C6073D
pgHook = 0x00000000
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 1534 (0xFE050000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 8 (0x08000000)
lineAlloc = 8 (0x08000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0x6067033D
>>>>> 2nd level extension part <<<<<
tabhBack = 0xE82F063D
delta_head = 0000000000000000CF000000000000000400000020180000000000004D00430055004F000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CON_MODE_ORDE
O
4
F
0
0
TGSBT
22222222222222222222222222222222222222
00000000000000000000000000000000000000
00000000000000000000000000000000000000
00000000000000000000000000000000000000
CL_GUI_RESOURCES=>COL_TEXTAREA
31
1000
F000
LS_NUMBERS-AUFNR_NEW
000001000677
333333333333
000001000677
000000000000
000000000000
T024I
200UT10100PG for Term & Comp
33355333335426672567622246672222222222222222
20054101000706F20452D0603FD00000000000000000
00000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000
LS_T399X
200UT10UM01 X INST 30UT01UT01
3335533543322222222222222222252222445522335533553322222222222222222222222222222222222222222222
20054105D01000000000000000000800009E3400305401540100000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CON_VBKZ_U
U
5
5
0
0
/***/CU_ORDER_IO-DISP_FACTOR
2097152
0
0
LS_DESIGN
200########000050000109DDCY00000000000000008835PROFILE1 0001UT10UM0100220100MWH001
333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
/***/CUDESIGN
200########000050000109DDCY00000000000000008835PROFILE1 0001UT10UM0100220100MWH001
333D5FC807333333333333344453333333333333333333355444443223333553354333333333345433322222222222
200CDB1E02B00005000010944390000000000000000883502F69C5100000154105D0100220100D7800100000000000
000599F215300000000000000000000000000000000000000000000000000000000000000000000000000000000000
0004C91D3DB00000000000000000000000000000000000000000000000000000000000000000000000000000000000
G_DROP_COUNT
0
0000
0000
LS_DESIGN-DESNUM
000050000109
333333333333
000050000109
000000000000
000000000000
No. 1 Ty. MODULE (PAI)
Name USER_COMMAND_2000
GT_SELTAB_INIT
Table[initial]
Internal notes
The termination was triggered in function "RfcExtendedReceive"
of the SAP kernel, in line 422 of the module
"//bas/700_REL/src/krn/rfc/abrfcrcv.c#4".
The internal operation just processed is "FUNC".
Internal mode was started at 20070827180011.
Status of connection:
RFC state: " "
RFC error text: "RFC_ERROR_SYSTEM_FAILURE"
CPI-C error text: "The current application triggered a termination with a short
dump."
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=26488)
When : 8/27/2007 18:1:10.942
Threads : 2
Computer Name : MB1ES1005
User Name : ec6adm
Number of Processors: 2
Processor Type: x86 Family 15 Model 4 Stepping 10
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 5e10
eax=000f93c0 ebx=0000042c ecx=00003118 edx=00000000 esi=0000042c edi=00000000
eip=7c82ed54 esp=056d71f0 ebp=056d7260 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:056d71f0=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:62bd5803=00000000
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
056d7260 77e6ba42 0000042c 0001d4c0 00000000 056d7298 ntdll!KiFastSystemCallRet
056d7274 0109504d 0000042c 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
056d7298 00582118 00582151 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess (ntstcdbg.c (501))
056d729c 00582151 7c38b5c8 7c38b5c8 7c38b5c8 01e9b1b8 disp+work!NTStack (dptstack.c (1367))
056d72b8 00582185 7c38b5c8 00000000 008b7ec8 7c38b5c8 disp+work!CTrcStack2 (dptstack.c (352))
056d72c4 008b7ec8 7c38b5c8 00000000 005f0059 00330030 disp+work!CTrcStack (dptstack.c (182))
056d72e8 008bb39f 00711076 056d8018 056d7be8 00200020 disp+work!rabax_CStackSave [abrabax.c (7063)
056d7b90 009eca8b 020b9e4c 020b9e14 000001a6 5d88acf0 disp+work!ab_rabax (abrabax.c (1243))
056d7bcc 009ed19e 00000003 00711076 00000020 00000000 disp+work!rcv_message (abrfcrcv.c (422))
056d8068 009ed29d 00000003 00000000 00710c47 056d80c0 disp+work!RfcExtendedReceive [abrfcrcv.c (14
056d808c 00714873 00000003 00710c47 056d80c0 00711076 disp+work!ab_rfcreceive (abrfcrcv.c (59))
056d80e4 0071886b 2694a7c8 2694a7cc 2694a7cc 2694a7cc disp+work!jfunc_get (abfunc.c (5103))
056d89f4 007191d0 00000003 000000b4 00000000 05e8b7c0 disp+work!jfunc_nonstandard [abfunc.c (1655)
056dcfb0 006e3e2d 00000003 3ced8f90 00000000 056dd018 disp+work!ab_jfunc (abfunc.c (554))
056dd018 0081cb5e 00000000 3ced8f90 056dd164 3cedb514 disp+work!ab_extri (abextri.c (552))
056dd02c 00897dbd 00000000 3cedae46 005bf4cd 3ceda13c disp+work!ab_xevent (abrunt1.c (281))
056dd038 005bf4cd 3ceda13c 000000ea 3cedae46 00000000 disp+work!ab_dstep (abdynpro.c (492))
056dd164 005c25be 3ced8f90 3ced8f90 056dfc78 00000000 disp+work!dynpmcal (dymainstp.c (2398))
056dd178 005c1def 00000001 3ced8f90 00000003 056dfc78 disp+work!dynppai0 (dymainstp.c (1004))
056dd194 00595e69 3ced8f90 00000001 00000001 00000001 disp+work!dynprctl (dymainstp.c (360))
056dfcec 00490e06 00000004 0049d15f 00000004 01dadd00 disp+work!dynpen00 (dymain.c (1628))
056dfcf4 0049d15f 00000004 01dadd00 00000003 00000002 disp+work!Thdynpen00 (thxxhead.c (4773))
056dfee0 0049d6d6 00000001 00000000 00000000 00430000 disp+work!TskhLoop (thxxhead.c (4455))
056dff00 00421c36 00000000 00000000 7ffde000 056dff60 disp+work!ThStart (thxxhead.c (1173))
056dff14 00401080 00000003 05876980 00000001 00000000 disp+work!DpMain (dpxxdisp.c (1121))
056dff60 01242970 00000003 05876980 05877a10 01cce000 disp+work!nlsui_main (thxxanf.c (82))
056dffc0 77e523e5 00000000 00000000 7ffde000 8967f020 disp+work!wmainCRTStartup (crtexe.c (395))
056dfff0 00000000 0124282d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 61fc
eax=00000000 ebx=00000103 ecx=0587a700 edx=02714360 esi=00000000 edi=00000000
eip=7c82ed54 esp=0799fec0 ebp=0799ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0799fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:64e9e4d3=00000000
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0799ff04 0119030a 000006e0 00000000 00000000 0587a798 ntdll!KiFastSystemCallRet
0799ff84 7c349565 00000000 00000000 00000000 0587a700 disp+work!SigIMsgFunc (signt.c (610))
0799ffb8 77e6608b 0587a700 00000000 00000000 0587a700 MSVCR71!endthreadex
0799ffec 00000000 7c3494f6 0587a700 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
/***/SAPLCUORDER_N
0
10.08.2007
10:12:44
541696
E
1
Typ
/***/CUDESIGN
0
10.08.2007
10:05:19
7168
2
Typ
/***/CU_ORDER_IO
0
10.08.2007
09:53:38
4096
3
Typ
/***/DESTYPE
0
10.08.2007
10:05:21
2048
4
Typ
/***/PRF_ORD
0
10.08.2007
10:05:21
4096
5
Prg
SAPMSSYD
0
04.04.2007
10:28:36
21504
E
6
Prg
SAPFSYSCALLS
0
09.09.2004
14:18:32
8192
E
7
Typ
/***/G_CUST
0
10.08.2007
09:53:39
3072
8
Prg
/***/SAPLTABLES
8
10.08.2007
10:13:00
19456
E
9
Typ
/***/G_CHAR
0
10.08.2007
10:05:21
3072
10
Prg
SAPLCTCE
10
09.09.2004
14:18:34
9216
E
11
Typ
CABN
0
18.09.2001
10:02:26
12288
12
Prg
SAPLICON
12
04.04.2007
10:10:28
27648
E
13
Prg
%_CICON
12
07.02.2006
10:40:00
104448
E
14
Typ
ICONT
0
04.04.2007
10:10:08
2048
15
Typ
NRIV
0
02.04.1998
08:14:54
3072
16
Prg
SAPLBSVA
16
04.04.2007
14:47:00
296960
E
17
Typ
/***/CU_ORDER_S_OP_N
0
10.08.2007
09:53:39
14336
18
Prg
CL_GUI_CONTROL================CP
18
28.02.2005
21:03:09
112640
E
19
Prg
%_CCNTL
18
18.02.2005
14:15:08
15360
E
20
Typ
OBJ_RECORD
0
14.02.1998
08:30:43
2048
21
Prg
CL_GUI_OBJECT=================CP
21
05.07.2005
13:10:15
375808
E
22
Prg
CL_GUI_CFW====================CP
22
28.02.2005
21:03:09
172032
E
23
Prg
CL_GUI_PROPS_CONSUMER=========CP
23
18.02.2005
14:15:08
30720
E
24
Prg
SAPLTHFB
24
04.04.2007
13:24:38
390144
E
25
Typ
EUDB
0
06.11.2003
20:28:08
8192
26
Prg
SAPLSFES
26
08.08.2007
16:46:17
259072
E
27
Prg
SAPLSPLUGIN
27
09.09.2004
14:18:36
8192
E
28
Prg
SAPLSTTMYes even i find it strange. But there is no syntax error and the fact is that it was working 2 days back. Suddenly it has started giving us this dump.
The code is as follows.
Commit design BAPI's
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT' .
IF save_okcode = con_order.
Commit order BAPI's
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
DESTINATION 'NONE'.
Here con_order is CU01.
Please let me know if anybody has faced this problem earlier.
Thanks in Advance
Meghana -
RE: Short dump after activation of BADI
Hi all,
We are getting short dumps in all the transactions after activating the BADI 'BADI_LAYER'
We are not able to execute any of the transactions.
The details of runtimeerror
Runtime Errors RAISE_EXCEPTION
Date and Time 30.07.2007 09:58:06
Short text
Exception condition "SINGLE_EXIT_MULTIPLY_ACTIVE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "SINGLE_EXIT_MULTIPLY_ACTIVE".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "SINGLE_EXIT_MULTIPLY_ACTIVE"
or
"SAPMF05A " "SINGLE_EXIT_MULTIPLY_ACTIVE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "sapdevp"
Network address...... "192.168.0.205"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SAPDEVP"
Database type..... "ORACLE"
Database name..... "TDV"
Database user ID.. "SAPSR4"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 6271344
Heap.... 0
Page.... 57344
MM Used. 1728072
MM Free. 360856
User and Transaction
Client.............. 400
User................ "FIUSER01"
Language key........ "E"
Transaction......... "FB50 "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPMF05A 1010"
Screen line......... 7
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPMF05A ".
In the source code you have the termination point in line 145
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
115
SELECT SINGLE is_impl FROM badiisimpled INTO is_impl
116
WHERE badi_name = mig_badi_name.
117
IF sy-subrc NE 0.
118
not yet filled
119
is_impl = cl_enh_badi_tool_utilities=>update_badiisimpled( mig_badi_name ).
120
ENDIF.
121
122
IF is_impl = 'X'.
123
ok at least one implementation found
124
act_imp_existing = 'X'.
125
ENDIF.
126
127
ENDIF.
128
ENDIF.
129
ELSE.
130
131
check how many implementations exist for an exit
132
CALL METHOD cl_badi_flt_data_trans_and_db=>act_imps_per_flt_val
133
EXPORTING
134
runtime_call = seex_true
135
exit_name = exit_name
136
EXCEPTIONS
137
singular_exit_multiply_active = 1
138
no_active_implementation = 2
139
only_default_implementation = 3
140
OTHERS = 4.
141
CASE sy-subrc.
142
WHEN 0.
143
act_imp_existing = seex_true.
144
WHEN 1.
>>>>>
RAISE single_exit_multiply_active.
146
WHEN 2.
147
act_imp_existing = seex_false.
148
WHEN 3.
149
act_imp_existing = seex_false.
150
def_impl = seex_true.
151
WHEN 4.
152
RAISE data_incons_in_exit_managem.
153
ENDCASE.
154
155
new parameter considered for performance purposes
156
IF act_imp_existing = seex_true OR
157
def_impl = seex_true OR
158
null_instance_accepted = seex_false.
159
160
ok, then do your job
161
CREATE OBJECT exit TYPE (abs_type_classname).
162
CATCH SYSTEM-EXCEPTIONS move_cast_error = 1.
163
instance ?= exit.
164
ENDCATCH.
Contents of system fields
Name
Val.
SY-SUBRC
1
SY-INDEX
0
SY-TABIX
0
SY-DBCNT
2
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
FSKB
SY-UCOMM
SY-TITLE
Enter G/L Account Document: Company Code TJ01
SY-MSGTY
S
SY-MSGID
B!
SY-MSGNO
015
SY-MSGV1
00001140
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070730
SY-UZEIT
095806
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
5 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 145
CL_EXITHANDLER=>GET_INSTANCE
4 METHOD CL_EXIT_MASTER================CP CL_EXIT_MASTER================CM004 2
CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
3 METHOD CL_EX_FI_HEADER_SUB_1300======CP CL_EX_FI_HEADER_SUB_1300======CM003 53
CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
2 FORM SAPMF05A MF05AF00_D0100_PRE_APPL_SUB_2 50
D0100_PRE_APPL_SUB_PBO
1 MODULE (PBO) SAPMF05A MF05AO00_D0100_PRE_APPL_SUB 10
D0100_PRE_APPL_SUB
Chosen variables
Name
Val.
No. 5 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
BADI_LAYER
44445445452222222222
2149FC19520000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
%_SPACE
2
0
0
0
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
SEEX_TRUE
X
5
8
0
0
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_TABLE_BADIISIMPLED>
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
SY-XPROG
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 4 Ty. METHOD
Name CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
%_SPACE
2
0
0
0
SYST-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_EXIT_MASTER=>LAYER_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
No. 3 Ty. METHOD
Name CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
IM_BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IM_X_NO_INPUT
2
0
0
0
FLT_VAL
IN
44
9E
00
00
<EXIT_OBJ>-IMP_CLASS
<FLT_CACHE_LINE>-OBJ
|
| F0000000 |
| F0000000 |
| %_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 0000 |
| 0000 |
| ME->INSTANCE_BADI_TABLE |
| Table[initial] |
| <EXIT_OBJ> |
| ??? |
| ?????? |
| ?????? |
| <%_L001> |
| ??? |
| ?????? |
| ?????? |
| RSJOBINFO |
| 00000000000000 ## |
| 2222222222222222222222222222222233333333333333222222222222222222222222222222222200 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| SY-REPID |
| CL_EX_FI_HEADER_SUB_1300======CP |
| 4454554454444455554533333333334522222222 |
| 3CF58F69F851452F352F1300DDDDDD3000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| <%_L001>-METHOD_NAME |
| ??? |
| ?????? |
| ?????? |
| EXIT_OBJ_TAB |
| Table[initial] |
| SY-SUBRC |
| 1 |
| 0000 |
| 1000 |
| ME |
|
F0000000
C0003000
SXRT_TRUE
X
5
8
0
0
No. 2 Ty. FORM
Name D0100_PRE_APPL_SUB_PBO
*BSEG-STBUK
2222
0000
0000
0000
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
KDBTAB-DMBTR
0.0.0.0.0.0.1.
0000000
000000C
%_SPACE
2
0
0
0
KDPTAB-BELNR
2222222222
0000000000
0000000000
0000000000
KDPTAB-GJAHR
0000
3333
0000
0000
0000
KDPTAB-BUZEI
000
333
000
000
000
KDBTAB-XRUND
2
0
0
0
SPACE
2
0
0
0
F05ACTRL
2
0
0
0
SYST
######################################ð#######################################~######### C####
00000000000000000000000000000000000000F0000000000000000000000000000000000000107000000050240000
000000200000000000002010100010000000000000000010400000000000000000000000000080E000200080030100
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000040000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000D000000C
BSED
0000000# ############## 0000000000000000
2222222222222222233333330200000000000000223333333333333333222222222222222222222222222222222222
00000000000000000000000000000C000000C000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000C0000000C000000C000000000000000000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
G_APPL_SUB_ACTIVE
X
5
8
0
0
CHAR_X
X
5
8
0
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
BKPF-BUKRS
TJ01
5433
4A01
0000
0000
BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
G_APPL_SUB_DISABLE
2
0
0
0
T005-INTCA
IN
44
9E
00
00
No. 1 Ty. MODULE (PBO)
Name D0100_PRE_APPL_SUB
C_FIELD_DIALOG_ALL
BUTTON_DIALOG_ALL
4555445444444544422222222222222222222222222222222222222222222222222222222222222222222222222222
2544FEF491CF7F1CC00000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Internal notes
The termination was triggered in function "ab_jfune"
of the SAP kernel, in line 2561 of the module
"//bas/700_REL/src/krn/runt/abfunc.c#10".
The internal operation just processed is "FUNE".
Internal mode was started at 20070730095806.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=4436)
When : 7/30/2007 9:58:6.359
Threads : 2
Computer Name : SAPDEVP
User Name : SAPServiceTDV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 250c
eax=34d52300 ebx=000003f8 ecx=0001ccc0 edx=34d039e0 esi=000003f8 edi=00000000
eip=7c82ed54 esp=053fceb4 ebp=053fcf24 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:053fceb4=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:6627b4c7=00002100
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
053fcf24 77e6ba42 000003f8 0001d4c0 00000000 053fcf5c ntdll!KiFastSystemCallRet
053fcf38 0100b3aa 000003f8 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
053fcf5c 0055b4ac 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess
053fcf60 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 01d35ab0 disp+work!NTStack
053fcf7c 0055b519 7c38b5c8 00000000 008536a8 7c38b5c8 disp+work!CTrcStack2
053fcf88 008536a8 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack
053fcfac 008569fa 6d1d037c 0000001b 00000000 01cfc168 disp+work!rabax_CStackSave [abrabax.c (6871)
053fd084 006aaaf4 0134837c 0134835c 00000a01 235f1640 disp+work!ab_rabax
053fd0c0 0067bb56 00000003 34cf5708 00000000 053fd128 disp+work!ab_jfune
053fd128 007af183 00000000 34cf5708 053fd274 34cf8c26 disp+work!ab_extri
053fd13c 00837a37 00000000 34cf7dd6 00596fa0 34cf68b4 disp+work!ab_xevent
053fd148 00596fa0 34cf68b4 000003db 34cf7dd6 00000000 disp+work!ab_dstep
053fd274 00597fa1 34cf5708 34cf5708 053ffd04 00597b13 disp+work!dynpmcal
053fd284 00597b13 34cf5708 34cf5708 00000003 053ffd04 disp+work!dynppbo0
053fd2a0 0056dcf1 34cf5708 0006e768 00000000 0000000c disp+work!dynprctl
053ffd04 00471848 00000013 07de0048 00000001 00494960 disp+work!dynpen00
053ffd14 00494960 0000000c 00000000 00000003 00000002 disp+work!Thdynpen00
053ffee0 00494ee2 00000001 00000000 00000000 00430000 disp+work!TskhLoop
053fff00 00421150 00000000 00000000 7ffd8000 053fff60 disp+work!ThStart
053fff14 00401080 00000003 003f6850 00000001 00000000 disp+work!DpMain
053fff60 011a94a0 00000003 003f6850 003f78f8 01bd5000 disp+work!nlsui_main
053fffc0 77e523e5 00000000 00000000 7ffd8000 88602680 disp+work!wmainCRTStartup
053ffff0 00000000 011a935d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 27bc
eax=00000001 ebx=00000103 ecx=fffffffe edx=003f01f8 esi=00000000 edi=00000000
eip=7c82ed54 esp=075dfec0 ebp=075dff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:075dfec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:6845e4d3=50004500
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
075dff04 010f7ffc 000006c0 00000000 00000000 003f77d0 ntdll!KiFastSystemCallRet
075dff84 7c349565 00000000 00000000 00000000 0587ff08 disp+work!SigIMsgFunc
075dffb8 77e6608b 0587ff08 00000000 00000000 0587ff08 MSVCR71!endthreadex
075dffec 00000000 7c3494f6 0587ff08 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMF05A
0
22.05.2007
11:37:49
1563648
E
1
Prg
SAPMSSYD
0
10.01.2007
12:33:28
21504
E
2
Prg
SAPFSYSCALLS
0
09.09.2004
14:18:32
8192
E
3
Typ
TFDIR
0
13.02.2005
17:31:57
3072
4
Prg
SAPLAPAR_EBPP_SERVICES
4
03.01.2007
11:23:55
114688
E
5
Typ
T042ZEBPP
0
08.01.2002
14:42:24
2048
6
Typ
T020
0
24.02.1999
03:17:19
3072
7
Typ
RFOPT2
0
11.12.2003
15:00:17
5120
8
Prg
SAPFF001
0
22.05.2007
11:37:49
195584
E
9
Typ
SWOTOBJID
0
04.05.1995
15:20:52
2048
10
Prg
SAPLSWOR
10
10.01.2007
12:33:34
292864
E
11
Typ
TFBUF
0
30.11.1998
22:08:34
3072
12
Typ
ACC_KONTEXT
0
08.01.2003
17:30:26
3072
13
Typ
BKPF
0
13.03.2006
11:01:29
18432
14
Prg
SAPLFACSCORE
14
01.12.2006
22:00:12
13312
E
15
Typ
T001
0
25.08.2005
22:03:13
13312
16
Prg
SAPLACHD
16
03.01.2007
11:23:55
51200
E
17
Prg
SAPFSPOR
0
09.09.2004
14:18:32
15360
E
18
Prg
SAPLSCNT
18
18.02.2005
14:16:06
30720
E
19
Typ
DYCBOX
0
20.08.1998
11:16:53
3072
20
Prg
SAPLSVSM
20
18.02.2005
14:16:06
27648
E
21
Prg
SAPLSGUI
21
10.01.2007
12:33:33
82944
E
22
Prg
SAPLSTTM
22
05.07.2005
13:10:18
69632
E
23
Prg
SAPLSBDC
23
05.07.2005
13:10:18
44032
E
24
Prg
CL_DATAPROVIDER===============CP
24
28.02.2005
21:00:46
49152
E
25
Prg
%_CCNTL
24
18.02.2005
14:15:08
15360
E
26
Typ
OBJ_RECORD
0
14.02.1998
08:30:43
2048
27
Prg
SAPLSTUP
27
08.03.2005
19:04:31
73728
E
28
Prg
SAPLCNDP
28
01.12.2006
22:04:33
193536
E
29
Prg
SAPSHDTV
18
05.01.2005
16:26:16
33792
E
30
Typ
SHDSTU
0
14.12.1998
23:15:34
2048
31
Typ
SHDSTCIU
0
14.12.1998
23:15:34
2048
32
Prg
SAPFGUICNTL
0
18.02.2005
14:15:08
24576
E
33
Prg
SAPLOLEA
33
05.07.2005
13:10:18
96256
E
34
Prg
SAPLSFES
34
10.01.2007
13:26:20
256000
E
35
Prg
SAPLSPLUGIN
35
09.09.2004
14:18:36
8192
E
36
Typ
ARFCRDATA
0
13.02.2005
18:20:24
7168
37
Prg
SAPLGRFC
37
13.02.2005
18:20:25
16384
E
38
Typ
SWCBCONT
0
15.11.2000
17:55:11
3072
39
Typ
OLE_VERBS
0
04.04.1995
16:02:20
2048
40
Typ
OLE_PA
0
04.04.1995
16:02:19
2048
41
Typ
ACGL_HEAD
0
11.12.2003
14:59:21
8192
42
Typ
RF05A
0
11.04.2005
11:50:21
38912
43
Typ
TCURC
0
01.12.1999
12:14:40
2048
44
Prg
SAPLFAGL_ACTIVATION_SERVICES
44
30.04.2007
17:00:55
45056
E
45
Prg
SAPLSTR9
45
09.05.2006
10:39:47
39936
E
46
Prg
CONTEXT_X_TR_SYS_PARAMS
45
09.05.2006
10:39:47
40960
E
47
Typ
TCONT
0
09.09.2004
14:18:43
2048
48
Typ
CONTEXTB
0
09.09.2004
14:15:52
6144
49
Typ
FAGL_ACTIVEC
0
19.08.2004
16:55:10
5120
50
Typ
FAGL_CHECK_SETUP
0
11.12.2003
15:01:05
2048
51
Prg
SAPLSHD0
51
03.01.2007
06:52:22
232448
E
52
Prg
SAPLBFFM3
52
10.01.2007
13:15:21
169984
E
53
Typ
OFIWA
0
15.04.1998
00:11:05
2048
54
Typ
FTEXTS
0
20.08.2001
12:13:26
3072
55
Prg
SAPLITSR
55
10.01.2007
14:23:52
107520
E
56
Typ
FMRFC
0
13.08.1997
12:32:59
2048
57
Typ
TBE01
0
20.01.2003
16:41:38
2048
58
Typ
TBE31
0
03.09.1997
03:01:11
2048
59
Typ
TBE31
0
03.09.1997
03:01:11
2048
60
Typ
TBE11
0
03.09.1997
03:01:06
2048
61
Prg
CONTEXT_X_SP_INFO
55Hello Sowmya
The BAdI BADI_LAYER is not defined for <b>Multiple-Use</b> (see checkbox on tabstrip <i>Attributes</i>).
Apparently you have created <i>several </i>implementation of this BAdI and activated <i>several </i>(at least 2) of these implementations.
If you inactivate all except a single implementation the BAdI (and all transactions using this BAdI) should work again.
Regards
Uwe -
Getting Short dump When Executing MIGO: SYNTAX_ERROR
Please Help,
I am getting this dump, when i hit MIGO transaction
Runtime Errors SYNTAX_ERROR
Date and Time 10.12.2008 08:28:03
Short text
Syntax error in program "MB_MIGO_BADI==================CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"MB_MIGO_BADI==================CP " in include
"MB_MIGO_BADI==================CM000 " in
line 0:
"The specified type cannot be converted into the target variables."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "MB_MIGO_BADI==================CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
MB_MIGO_BADI==================CP :
"The specified type cannot be converted into the target variables."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "DMATE"
Network address...... "140.1.1.141"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "dmate"
Database type..... "ADABAS D"
Database name..... "AD0"
Database user ID.. "SAPAD0"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jun 23 2008 00:09:46"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQLDBC 7.6.0.018 CL 119055 "
Patch level. 166
Patch text.. " "
Database............. "MaxDB 7.6, MaxDB 7.7"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 40960
MM Used. 1627776
MM Free. 2559440
User and Transaction
Client.............. 040
User................ "LAKSHMI"
Language key........ "E"
Transaction......... "MIGO "
Transactions ID..... "EE72C6DDC96BF1F99FA4001143E563CA"
Program............. "CL_EX_MB_MIGO_BADI============CP"
Screen.............. "SAPLMIGO 0001"
Screen line......... 2
Information on where terminated
Termination occurred in the ABAP program "CL_EX_MB_MIGO_BADI============CP" -
in "IF_EX_MB_MIGO_BADI~INIT".
The main program was "SAPLMIGO ".
In the source code you have the termination point in line 1
of the (Include) program "CL_EX_MB_MIGO_BADI============CM001".
Source Code Extract
Line SourceCde
>>>>> method IF_EX_MB_MIGO_BADI~INIT.
2 CLASS CL_EXIT_MASTER DEFINITION LOAD.
3
4 DATA l_badi TYPE REF TO MB_MIGO_BADI.
5
6
7
8
9
10 TRY.
11
12 GET BADI l_badi
13 CONTEXT me.
14
15 CALL BADI l_badi->INIT
16
17 CHANGING
18 CT_INIT = CT_INIT.
19
20
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 1
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE
SY-MSGTY S
SY-MSGID VBDOCUBATCH
SY-MSGNO 001
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20081210
SY-UZEIT 082802
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
4 METHOD CL_EX_MB_MIGO_BADI============CP CL_EX_MB_MIGO_BADI============CM001 1
CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
3 METHOD SAPLMIGO LMIGOGL2 54
LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
2 FORM SAPLMIGO LMIGOIN1 11
INITIALIZATION
1 MODULE (PBO) SAPLMIGO LMIGOPBO 11
PBO_INITILIZATION
Chosen variables
Name
Val.
No. 4 Ty. METHOD
Name CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
CT_INIT
Table[initial]
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
CL_EX_MB_MIGO_BADI============CP
4454554454444544443333333333334522222222
3CF58FD2FD97FF2149DDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-SUBRC
0
0000
0000
No. 3 Ty. METHOD
Name LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
SY-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>CNTL_ERROR
2
0
0
0
ABAP_FALSE
2
0
0
0
SYST-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
GOSEARCH_PO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TEXT-220
Dest
46772222
45340000
00000000
00000000
%_SPACE
2
0
0
0
%_TAG*TS_GOITEM
<initial>
<initial>
<initial>
X
X
5
8
0
0
LCL_MIGO_GLOBALS=>IF_BADI
F0000000
70008000
%_FL2*TV_GOFREIGHT
<initial>
<initial>
<initial>
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>T_BADI
Table[initial]
/SPE/CL_INB_ACTION_INFO=>C_DIALOG_MIGO
SCREEN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OREF_TITLEBAR
F0000000
F0000000
L_BADIS_1
0
0000
0000
SY-MSGID
VBDOCUBATCH
54444544544222222222
624F3521438000000000
00000000000000000000
00000000000000000000
OREF_TIP
F0000000
F0000000
TV_GOSERIAL-CX
<initial>
<initial>
<initial>
SPACE
2
0
0
0
SY-MSGNO
001
333
001
000
000
No. 2 Ty. FORM
Name INITIALIZATION
OREF_ARCH
F0000000
F0000000
LCL_MIGO_GLOBALS=>KERNEL
F0000000
D0002000
%_CX_TABLEVIEW_VERSION
0
3
0
0
0
GODEFAULT-DEF_XBOM
2
0
0
0
LCL_MIGO_GLOBALS=>KERNEL->C_REFDOCTYPE_MATDOC
MAT
445
D14
000
000
No. 1 Ty. MODULE (PBO)
Name PBO_INITILIZATION
GOITEM-UMWRK
2222
0000
0000
0000
GOITEM-UMNAME1
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
Internal notes
The termination was triggered in function "ab_genprog"
of the SAP kernel, in line 1551 of the module
"//bas/700_REL/src/krn/runt/abgen.c#10".
The internal operation just processed is "CPOP".
Internal mode was started at 20081210082802.
Program name.........: "MB_MIGO_BADI==================CP ".
Error message........: "The specified type cannot be converted into the target
variables.".
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=5776)
When : 12/10/2008 8:28:3.84
Threads : 2
Computer Name : DMATE
User Name : SAPServiceAD0
Number of Processors: 4
Processor Type: EM64T Family 15 Model 4 Stepping 1
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 14f0
FramePtr ReturnAd Param#1 Function Name
0000000007eb8800 0000000077d7047f 00000000411b4070 ntdll!NtWaitForSingleObject
0000000007eb88a0 000000000173b1d1 000000000000042c kernel32!WaitForSingleObjectEx
0000000007eb8af0 00000000006179c5 0000000000000001 disp+work!NTDebugProcess [ntstcdbg.c (501)]
0000000007eb8b20 0000000000b05d9c 0000000000000001 disp+work!CTrcStack [dptstack.c (182)]
0000000007eb8b70 0000000000b0afc0 0000000000000001 disp+work!rabax_CStackSave [abrabax.c (7093)]
0000000007eb9550 0000000000a51c94 0000000001d12320 disp+work!ab_rabax [abrabax.c (1231)]
0000000007ebc220 00000000007f753a 0000000000000001 disp+work!ab_genprog [abgen.c (1555)]
0000000007ebc2f0 00000000007f7dc8 00000000ffffffff disp+work!newload [abload1.c (336)]
0000000007ebc350 00000000007f7e8e 0000000000000056 disp+work!ab_LoadProgOrTrfo [abload1.c (160)]
0000000007ebc380 00000000007bc84d 000007fe725a5f70 disp+work!ab_LoadProg [abload1.c (78)]
0000000007ebc450 00000000007be91a 00002a441022f402 disp+work!LoadGlobalClass [abobject.c (943)]
0000000007ebc4a0 00000000007c1bdd 0000000000000000 disp+work!ab_FillCfix [abobject.c (1603)]
0000000007ebc580 000000000083ae52 0000000000000000 disp+work!ab_jaboo [abobject.c (2248)]
0000000007ebc700 0000000000a1ccb7 000000000000000d disp+work!ab_extri [abextri.c (554)]
0000000007ebc750 0000000000ad50ac 000000000000000d disp+work!ab_xevent [abrunt1.c (281)]
0000000007ebc7e0 0000000000679328 000000000000000d disp+work!ab_dstep [abdynpro.c (492)]
0000000007ebc960 000000000067d02d 000007fe725d6f20 disp+work!dynpmcal [dymainstp.c (2396)]
0000000007ebc9f0 000000000067ca2a 0000000000000000 disp+work!dynppbo0 [dymainstp.c (543)]
0000000007ebcaa0 00000000006395c5 0000000000000000 disp+work!dynprctl [dymainstp.c (360)]
0000000007ebfc30 00000000004dbc4c 000000000000000c disp+work!dynpen00 [dymain.c (1646)]
0000000007ebfeb0 000000000042f096 0000000007f62ff0 disp+work!TskhLoop [thxxhead.c (4538)]
0000000007ebfee0 000000000040108d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1136)]
0000000007ebff10 00000000019e84b1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000007ebff70 0000000077d5966c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
0000000007ebffa0 0000000000000000 00000000019e8340 kernel32!BaseProcessStart
State Dump for Thread Id b94
FramePtr ReturnAd Param#1 Function Name
000000000c9dfe40 0000000077d5f651 0000000000000000 ntdll!NtFsControlFile
000000000c9dfeb0 00000000018ce23f fffffffffffffffe kernel32!ConnectNamedPipe
000000000c9dff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000c9dff70 0000000077d6b69a 0000000077d6b660 msvcrt!endthreadex
000000000c9dffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
List of ABAP programs affected
Index Typ Program Group Date Time Size Lang.
0 Prg SAPLMIGO 0 04.05.2008 12:54:34 1561600 E
1 Prg SAPMSSYD 0 25.02.2008 17:02:32 21504 E
2 Prg SAPFSYSCALLS 0 09.09.2004 14:18:32 7168 E
3 Prg CL_MMIM_USERDEFAULTS==========CP 3 06.05.2002 10:42:38 21504 E
4 Typ ESDUS 0 01.03.1999 13:36:04 2048
5 Typ GOHEAD 0 07.02.2006 10:07:36 11264
6 Typ MKPF 0 25.08.2005 22:02:19 7168
7 Typ KBEFU 0 16.03.2008 17:46:49 6144
8 Typ LFA1 0 16.03.2008 17:47:20 22528
9 Typ MIGO_CUST_ACTION 0 30.11.1999 10:19:14 3072
10 Typ MIGO_CUST_REFDOC 0 30.11.1999 10:19:14 2048
11 Typ X031L 0 05.07.2005 13:10:15 6144
12 Prg SAPLSDIFRUNTIME 12 19.11.2006 16:35:34 96256 E
13 Typ DFIES 0 28.12.2004 17:06:45 10240
14 Prg SAPLSDNT 14 09.03.2008 19:02:04 219136 E
15 Prg SAPLSUGS 15 31.03.2006 11:23:11 47104 E
16 Prg SAPLV01D 16 24.03.2008 17:03:30 40960 E
17 Typ IWRKZ 0 04.04.1995 15:56:46 2048
18 Typ TCUCH 0 07.01.2002 15:50:54 3072
19 Typ TCUBN 0 07.01.2002 15:50:53 2048
20 Typ TCUWS 0 13.08.1997 13:57:58 2048
21 Typ TCUDRV 0 07.01.2002 15:50:54 2048
22 Prg SAPLVBDOCUBATCH_BF 22 16.01.2004 14:28:56 10240 E
23 Typ TCUDB 0 14.01.2004 10:05:59 2048
24 Prg CL_GUI_CFW====================CP 24 28.02.2005 21:03:09 168960 E
25 Prg CL_GUI_PROPS_CONSUMER=========CP 25 18.03.2008 13:25:33 29696 E
26 Prg %_CCNTL 25 18.02.2005 14:15:08 15360 E
27 Prg SAPLTHFB 27 18.03.2008 13:24:52 394240 E
28 Typ EUDB 0 06.11.2003 20:28:08 8192
29 Typ TCURM 0 01.03.2005 10:56:26 5120
30 Prg CL_EXITHANDLER================CP 30 18.03.2008 13:11:35 30720 E
31 Prg SAPLSEXV 31 18.03.2008 13:12:58 117760 E
32 Typ SXS_ATTR 0 07.02.2006 10:09:24 5120
33 Typ BADIISIMPLED 0 19.05.2005 19:10:34 3072
34 Prg CL_ENH_BADI_TOOL_UTILITIES====CP 34 17.03.2008 11:03:36 13312 E
35 Typ BADI_MAIN 0 08.12.2004 18:01:11 2048
36 Typ BADI_IMPL 0 09.12.2004 19:05:43 3072
37 Typ TADIR 0 07.02.2006 10:08:38 5120
38 Prg CL_SWITCH=====================CP 38 17.03.2008 11:13:47 19456 E
39 Typ SFW_PACKAGE 0 07.03.2008 12:18:16 2048
40 Prg CL_ABAP_SWITCH================CP 40 14.10.2006 15:40:30 33792 E
41 Prg SAPLPA_PACKAGE_SERVICES 41 18.03.2008 13:12:54 152576 E
42 Typ TDEVC 0 08.12.2004 18:02:41 6144
43 Prg CL_EX_MB_MIGO_BADI============CP 43 05.12.2008 17:09:58 30720 E
44 Prg IF_EX_MB_MIGO_BADI============IP 30 19.05.2005 19:30:39 14336 E
45 Typ SYST 0 09.09.2004 14:18:12 31744
46 Typ GOSEARCH_PO 0 20.07.2001 19:17:34 4096
47 Prg /SPE/CL_INB_ACTION_INFO=======CP 47 24.03.2008 20:30:06 20480 E
48 Prg /SPE/IF_CONST=================IP 47 14.10.2006 18:49:02 7168 E
49 Typ GODEFAULT 0 14.01.2004 10:04:46 5120
50 Typ GOITEM 0 07.02.2006 10:07:36 65536
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPLMIGO
SYST . . : : 00004612
\0\0\0\0\x0001\0\x0370\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0
GOITEM . . : : 00005524
00000000000000000000
GOSEARCH_PO . . : : 00000492
GODEFAULT . . : : 00000220
Program SAPLV01D
TCUCH . . : : 00000122
0401100020061029095148ANOOPJ 00000000000000
TCUWS . . : : 00000060
040020061227101454CONSULTANT
TCUBN . . : : 00000060
040020061227101454CONSULTANT
TCUDRV . . : : 00000064
00000000000000
Program CL_GUI_PROPS_CONSUMER=========CP
EUDB . . : : 00004068
%CAA72C6DDAD55F1179FA4001143E563CA \0\0\0
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 Source Code Line
94 BRAX 01 FFEB CL_EX_MB_MIGO_BADI============CM001 15
95 CLEA 00 0020 CL_EX_MB_MIGO_BADI============CM001 15
96 EXCP 08 0000 CL_EX_MB_MIGO_BADI============CM001 22
97 BRAX 00 0005 CL_EX_MB_MIGO_BADI============CM001 22
98 EXCP 00 0007 CL_EX_MB_MIGO_BADI============CM001 22
99 BRAX 00 0003 CL_EX_MB_MIGO_BADI============CM001 22
100 EXCP 07 0000 CL_EX_MB_MIGO_BADI============CM001 22
101 BRAX 00 0001 CL_EX_MB_MIGO_BADI============CM001 23
102 EXCP 0B 0000 CL_EX_MB_MIGO_BADI============CM001 23
103 METH 01 0000 0000 0000 0000 0000 0000 0000 CL_EX_MB_MIGO_BADI============CM001 24
107 -
00 0000 CL_EX_MB_MIGO_BADI============CM001 24
108 ABOO 02 0000 0005 0000 CL_EX_MB_MIGO_BADI============CM001 1
>>>>> CPOP 00 0000 CL_EX_MB_MIGO_BADI============CM001 1
111 -
00 0000 CL_EX_MB_MIGO_BADI============CM001 1
112 METH 04 0000 0005 0002 0000 0003 0000 0000 CL_EX_MB_MIGO_BADI============CM002 1
116 PAR2 04 0000 C000 0000 CL_EX_MB_MIGO_BADI============CM002 1
118 PAR2 04 0000 C001 0000 CL_EX_MB_MIGO_BADI============CM002 1
120 PAR2 14 0000 C002 0000 CL_EX_MB_MIGO_BADI============CM002 1
122 PAR2 14 0000 C003 0000 CL_EX_MB_MIGO_BADI============CM002 1
124 PAR2 14 0000 C004 0000 CL_EX_MB_MIGO_BADI============CM002 1Hai,
Seems to be problem with the Program.
Please check the point 'What Happened' in the dump for more details.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"MB_MIGO_BADI==================CP " in include
"MB_MIGO_BADI==================CM000 " in
line 0:
"The specified type cannot be converted into the target variables."
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "MB_MIGO_BADI==================CP
You can also perform the syntax check from the ABAP Editor.
Take help from a ABAP consultant and try to check the syntax of the Program.
If you have access even you can check the syntax of the specified program from SE38.
Goto SE38 and put the program name and select 'Source code' and press F8, IN THE SOURCE CODE PAGE, press control+F2 and check whether there is any problem with the syntax or not.
If you find any take help from ABAP consultants.
Hope this helps.
Regards,
Yoganand.V -
What is Short Dump Analysis and secendry index ?
Dear Experts .
1.) What is purpose of T-codes SE30 and ST22 ?
What is Short Dump Analysis ?
2.) What is secendry index , How to use it ? How it effects the Performance of a report ?
Please it is urgent ...
Regards : RajneeshHi
A dump analysis is a comprehensive list that should enable you to identify the causes and possible solutions of program errors. The ABAP Workbench generates a short dump whenever a report or transaction terminates due to a serious error. The system enters the error in the system log and writes a snapshot of the program at the moment when it terminated into a special database table called SNAP.
Dump analyses give the user or programmer information about the causes of the error that has caused the program to terminate. Experienced users can use them to identify very quickly where and why this occurred. He or she can them solve the problem.
The snapshot contains the following information:
Why the program has terminated
What caused the program termination
Where in the program code the termination occurred
What you can do to correct the error
The values of the relevant system fields when the program terminated
The calls or events that were active when the program terminated
Any other programs that are affected.
http://help.sap.com/saphelp_nw70/helpdata/en/c6/617d0ce68c11d2b2ab080009b43351/content.htm
Index: Technical key of a database table.
Primary index: The primary index contains the key fields of the table and a pointer to the non-key fields of the table. The primary index is created automatically when the table is created in the database.
Secondary index: Additional indexes could be created considering the most frequently accessed dimensions of the table.
Structure of an Index
An index can be used to speed up the selection of data records from a table.
An index can be considered to be a copy of a database table reduced to certain fields. The data is stored in sorted form in this copy. This sorting permits fast access to the records of the table (for example using a binary search). Not all of the fields of the table are contained in the index. The index also contains a pointer from the index entry to the corresponding table entry to permit all the field contents to be read.
When creating indexes, please note that:
An index can only be used up to the last specified field in the selection! The fields which are specified in the WHERE clause for a large number of selections should be in the first position.
Only those fields whose values significantly restrict the amount of data are meaningful in an index.
When you change a data record of a table, you must adjust the index sorting. Tables whose contents are frequently changed therefore should not have too many indexes.
Make sure that the indexes on a table are as disjunctive as possible.
(That is they should contain as few fields in common as possible. If two indexes on a table have a large number of common fields, this could make it more difficult for the optimizer to choose the most selective index.)
Accessing tables using Indexes
The database optimizer decides which index on the table should be used by the database to access data records.
You must distinguish between the primary index and secondary indexes of a table. The primary index contains the key fields of the table. The primary index is automatically created in the database when the table is activated. If a large table is frequently accessed such that it is not possible to apply primary index sorting, you should create secondary indexes for the table.
The indexes on a table have a three-character index ID. '0' is reserved for the primary index. Customers can create their own indexes on SAP tables; their IDs must begin with Y or Z.
If the index fields have key function, i.e. they already uniquely identify each record of the table, an index can be called a unique index. This ensures that there are no duplicate index fields in the database.
When you define a secondary index in the ABAP Dictionary, you can specify whether it should be created on the database when it is activated. Some indexes only result in a gain in performance for certain database systems. You can therefore specify a list of database systems when you define an index. The index is then only created on the specified database systems when activated
Maybe you are looking for
-
My original iPad will not log me into Yahoo through Safari. It's been this way for one week. I can access Yahoo on my PC with no problem so I think the problem is my iPad or Safari.
-
How do I take music from my iPhone and put it on iTunes?
How do I take music from my iPhone and put it on iTunes?
-
DW CS3 - custom file extension no longer working correctly
Hi - for a particular job, I needed to use a custom file extension .htmx and it has been working fine. However, I went into DW CS3 today, and the file opens in the DW editor, but the code coloring and code hints etc seem to be broken. I've checked th
-
According to the Canadian Apple website i'm trying to clarify the following Can I use my iPhone outside my home country? Yes. iPhone is enabled to work on carrier networks using GSM around the world. Because the iPhone sold by the Apple Online Store
-
How do i let users modify patch lists?
I'm designing an application in which the user needs to create and modify patches. I would like the interface to have a list of user patches, followed by sliders an textual input boxes to modify parameters. I am aware that i could easily put together