Batch Job Performance Issue in BW
Hi All
I would like to if there are any performance tuning methods for batch jobs in BW. Few jobs are taking much longer time and i need to figure out a method to tune them.
Thanks in advance for your help
Regards
JP
Hi JP,
Dinesh is right, you need to consider the tuning for specific scenarios. If some of the jobs are taking longtime just access at what point they are taking time by going to the JobLog in source sytem/BW, and try to take up the optimization of the resources used inthe source system. For Eg: It can be even in the Extractor. I had come across such issue with long loading times for few ledgers in FISL. But could encounter that by spitting load with small number of records to BW with an ABAP program incorporated inthe InfoPack with the selections for the Reconcilation key.
In this way, you need to first identify the delay for the jobs. Then you can plan the things accordingly..
Hope this will help you..
Regards,
Madhu
Similar Messages
-
Batch Job Performance Issue.
Hi Experts,
I am facing a performance issue in a background job, on a selection screen it contains month start date, end date and also effective date as 01/01/2008.
Client executing this report once in every month. Since the effective date is constant, the database contains large volume of data i.e. more than 3 lakh records Presently. Finally the job gets cancelled.
Could you please suggest what should be done in this scenario? Is there any concept like splitting the records as batches like multiples of 20 thousands.
Thanks and Regards,
Stanlyhi
As you said you can split the records as packages. ( as teh issue is related to low memory of internal table )
select ....package size...
*-- program logic
endslect.
regards,
Naveen -
CK74 Batch Input performance issue
Hi SDNers
I've created a Batch input (call transaction) in order to load additive costs for several materials/months. However, I realized that the performance is really poor. So I've been analyzing this issue and I found 314528 SAP note where it says that I should use tcode CK74 instead of CK74N. Also, It says that there is no BAPIS for these transactions.
Did you get a performance issue on this transaction? How did you solve it?
Thanks in advance for your help
Best Regards
LeonardoHi,
Thanks for your answer. You're right. However, in this case. I used the tcode CK74.
Anyone had a similar performance issue?
Regards,
Leonardo -
Siebel EDQ batch job performance
Hi there,
We are using Siebel Public Sector 8.2.2.4 with EDQ 11.1.1.7 version to clean up existing contact records and also set up real-time deduplication for ongoing contacts. We didn't tune any parameters both from Siebel and EDQ side till now.
We observed that the process is taking 45-50 minutes to process 6000 records. We noticed that the process is taking more time while inserting the records from Siebel to staging database. The EDQ contact deduplication is just fine and it it taking around 8-14 minutes based on number of records to process.
Is there a way we can tune anything from Siebel side to improve the performance while loading the data into staging database. May be Batch max number of records or number of DB connections or sessions etc to improve the performance?
Also, can you suggest if we could run the jobs from Siebel ( by splitting into multiple batches) in parallel? I am not sure if this is an option as the parallel tasks uses the same sharing database and it might have an conflict.
Please suggest.
Regards
Siva SontiHi,
So to understand correctly, these are true batch jobs with the data being handed over using the staging tables.
It seems like the problem here - which we have seen before - is the performance of the candidate selection query in Siebel for incremental batch jobs - the piece where the candidate records for the selected batch of records to match are selected. How long does a Full Batch job take to run (as this does not need to make this query)?
Also, is this Siebel CRM or UCM? If UCM, you can use the 'UCM Batch' workflow which although it calls EDQ in real-time can be scaled using as many tasks in Siebel as the system can handle; customers have been able to load up to 9000 records/minute with this method.
The nature of the shared staging database means it only supports a single job for data from a single business component (e.g. Contact) at any one time, as you suspected.
If you are really 'loading records' into Siebel, you may be better of loading them using the EIM interface - perhaps with EDQ pre-matching the data and directly writing to the EIM tables.
Regards,
Mike -
Hi guys,
Our requirement is such that we have to process 3000 to 5000 back orders on daily basis.
If we use the standard transaction V_RA, it takes min 45 min to 1 hour to process all the back orders.So standard program is not meeting our requirement
Is there any way we can process 5000 orders in 3 to 5 min via batch program.
We will create Z program by copying V_RA and can do required modifications
Please advice
Regards
ManoHi ,
Discuss with your abaper to schedule the job more than work process ( distribute the work on multiple work process)
then its possible to get finished whatever time you want.
Thanks
siva -
Non-Batch Index Performance Issue
I have two tables that have identical data, one is receiving the data via a batch import, the other is receiving data real time at about 10 rows per second, every second, every day. Both tables also have the same index applied and both tables have a similar number of rows.
The batch import table seems to make use of the index and responds to queries (using 'where') very quickly while the table with real time data flow takes considerably longer to respond to the query.
What is the best way to optimize the index on tables that do not receive batch imports?Thanks for the replies,
Stats are gathered in the DB Maintenance Window every night - using the Oracle recommended 'auto' sample size. The stats on the table and indexes are no more than 24 hours old at any given time.
Also, the tkprof ouput is below:
select to_date(MSGDATETIME, 'YYYY-MM-DD HH24:MI:SS') DTG, MGHOSTNAME, PIXIDN, PIXTXT
from dmblue.fw16master
where msghostname = '10.104'
and to_char(to_date(msgdatetime, 'YYYY-MM-DD HH24:MI:SS'), 'Mon DD YYYY / HH24') like 'Sep 29 2006 / 09'
and msglevel = 'Info'
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 90 26.85 237.42 750925 757238 0 1335
total 92 26.85 237.43 750925 757238 0 1335
Misses in library cache during parse: 1
Optimizer mode: ALL_ROWS
Parsing user id: SYS
Rows Row Source Operation
1335 TABLE ACCESS FULL FW16MASTER (cr=757238 pr=750925 pw=0 time=242940908 us)
Any ideas? -
Creation of Vendors by batch jobs: Bypass the 'confirmation' process
Hello,
Need your kind suggestions please. When we create a vendor master data it's a two step process. In the first place we create and save it. In the second step a different user needs to log in and confirm the same before the vendor gets active in the system.
Now, our client usually have to create a huge load of vendors on a regular basis. So they want to automate this process by creating the vendors using a background job. Since the vendors would be created by the batch job, security issues would automatically be taken care of.
Therefore they want to avoid the second step of 'confirming' the vendors to get them 'active' in the system.
Is it possible to bypass the 'confirm' procedure so that no one has to log in and keep confirming the huge number of vendors that would need to be created?
Please advice. if you need more information, please let me know and I would try to answer as far as my knowledge goes.
Regards,
SuvarghyaHi,
Go to the following path,
IMG >> Financial Accounting >> Accounts Recievables and Accounts Payable >> Vendor Accounts >> Master Data >> Preparations for Creating Vendor Master Data >> Define sensitive Fields for Dual Controls (Vendors).
Click that activity, and delete all the fields that exists which makes it not necessary to confirm any of the vendors when they are created/made a change.
Good Luck,
SAP Solutioning -
Can a long running batch job causing deadlock bring server performance down
Hi
I have a customer having a long running batch job (approx 6 hrs), recently we experienced performance issue where the job now taking >12 hrs. The database server is crawling. Looking at the alert.log showing some deadlock,
The batch job are in fact many parallel child batch job that running at the same time, that would have explain the deadlock.
Thus, i just wondering any possibility that due to deadlock, can cause the whole server to be crawling, even connect to the database using toad is also getting slow or doing ls -lrt..
Thanks
Rgds
UngKok Aik wrote:
According to documentation, complex deadlock can make the job appeared hang & affect throughput, but it didn't mentioned how it will make the whole server to slow down. My initial thought would be the rolling back and reconstruct of CR copy that would have use up the cpu.
I think your ideas on rolling back, CR construction etc. are good guesses. If you have deadlocks, then you have multiple processes working in the same place in the database at the same time, so there may be other "near-deadlocks" that cause all sorts of interference problems.
Obviously you could have processes queueing for the same resource for some time without getting into a deadlock.
You can have a long running update hit a row which was changed by another user after the update started - which woudl cause the long-running update to rollback and start again (Tom Kyte refers to this as 'write consistency' if you want to search his website for a discussion on the topic).
Once concurrent processes start sliding out of their correct sequences because of a few delays, it's possible for reports that used to run when nothing else was going on suddenly finding themselves running while updates are going on - and doing lots more reads (physical I/O) of the undo tablespace to take blocks a long way back into the past.
And so on...
Anyway, according to the customer, the problem seems to be related to the lgpr_size as the problem disappeared after they revert it back to its orignial default value,0. I couldn't figure out what the lgpr_size is - can you explain.
Thanks
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
"Science is more than a body of knowledge; it is a way of thinking" Carl Sagan -
Performance issues-assigning background jobs to a designated server
Hello all, we have been having peformance issues in our production enviorment and were entertaining the idea of running all our our background jobs on a separate/designated server. Has anyone had any experience with this and if so any insight on how you did this would be appreciated? Thanks.
I suppose your performance issues are then for the online users? In general, the best option should be to distribute the workload as much as possible, to avoid performance problems for online users as well as background jobs.
I agree with Atish, this is something for Basis people. Ask them (hopefully that's not you to look at their application server settings. I know where I used to work before they had set up the system so only a certain part of the dialog processes could be occupied by background jobs. I am sure SAP has a lot of parameters that can be tweaked, possibly also with time-dependent settings? -
Hi
We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize.
We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process in captivate 6. so we request you to create a plugin or give a best option which have batch render quality and optimize in file size,Captivate is e-learning development software not a dedicated video convertor, you are better off trying something like Adobe Media Encoder or Super.
-
Creating a simple batch job to run every month and perform a deletion
dear all;
This is just for learning purposes
I have created a simple table below
create table t1
vid varchar2(30),
quantity number(6,2),
primary key (vid)
insert into t1
(vid, quantity)
values
('G1', 2);
insert into t1
(vid, quantity)
values
('G2', 3);
insert into t1
(vid, quantity)
values
('G3', 0);Now, I would like to create a simple batch job, that runs every month which is used to delete all vid that has a quantity of 0...How do i go about doing that. I have searched the web but can't seems to find any useful info so far..
Edited by: user13328581 on Sep 8, 2010 8:32 AMyou are missing a semi-colon in your package procedure call inside your begin ... end.
begin
dbms_scheduler.create_job
job_name => 'jobdeletezeroquantity'
, program_name => 'PLSQL_BLOCK'
, job_action => 'BEGIN mfg.testpkg.deletezeroquantity END;' <-- missing semi-colon on mfg.testpkg.deletezeroquantity
, start_date => systimestamp
, repeat_interval => 'freq=monthly; byday = 1'
, end_date => null
, enabled => True
, comments => 'used to run a delete procedure every month'
end;should be:
begin
dbms_scheduler.create_job
job_name => 'jobdeletezeroquantity'
, program_name => 'PLSQL_BLOCK'
, job_action => 'BEGIN mfg.testpkg.deletezeroquantity; END;'
, start_date => systimestamp
, repeat_interval => 'freq=monthly; byday = 1'
, end_date => null
, enabled => TRUE
, comments => 'used to run a delete procedure every month'
end; -
Performance issue showing read by other session Event
Hi All,
we are having a severe performance issue in my database when we are running batch jobs.
This was a new database(11.2.0.2) and we are testing the performance by running some batch jobs. These batch jobs included some inserts and updates.
I am seeing read by other session in top 5 timed events and cache buffers chains in Latch Miss Sources section.
Please help me to solve this out.
Inst Num Startup Time Release RAC
1 27-Feb-12 09:03 11.2.0.2.0 NO
Platform CPUs Cores Sockets Memory(GB)
Linux x86 64-bit 8 8 8 48.00
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 5605 29-Feb-12 03:00:27 63 4.5
End Snap: 5614 29-Feb-12 12:00:47 63 4.3
Elapsed: 540.32 (mins)
DB Time: 1,774.23 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 1,952M 1,952M Std Block Size: 16K
Shared Pool Size: 1,024M 1,024M Log Buffer: 18,868K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ --------------- --------------- ---------- ----------
DB Time(s): 3.3 0.8 0.02 0.05
DB CPU(s): 1.1 0.3 0.01 0.02
Redo size: 55,763.8 13,849.3
Logical reads: 23,906.6 5,937.4
Block changes: 325.7 80.9
Physical reads: 665.6 165.3
Physical writes: 40.4 10.0
User calls: 60.7 15.1
Parses: 10.6 2.6
Hard parses: 1.1 0.3
W/A MB processed: 0.6 0.2
Logons: 0.1 0.0
Executes: 151.2 37.6
Rollbacks: 0.0 0.0
Transactions: 4.0
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.94 Redo NoWait %: 100.00
Buffer Hit %: 97.90 In-memory Sort %: 100.00
Library Hit %: 98.06 Soft Parse %: 90.16
Execute to Parse %: 92.96 Latch Hit %: 100.00
Parse CPU to Parse Elapsd %: 76.71 % Non-Parse CPU: 98.57
Shared Pool Statistics Begin End
Memory Usage %: 89.38 87.96
% SQL with executions>1: 97.14 95.15
% Memory for SQL w/exec>1: 96.05 92.46
Top 5 Timed Foreground Events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avg
wait % DB
Event Waits Time(s) (ms) time Wait Class
db file sequential read 14,092,706 65,613 5 61.6 User I/O
DB CPU 34,819 32.7
read by other session 308,534 1,260 4 1.2 User I/O
direct path read 97,454 987 10 .9 User I/O
db file scattered read 71,870 910 13 .9 User I/O
Host CPU (CPUs: 8 Cores: 8 Sockets: 8)
~~~~~~~~ Load Average
Begin End %User %System %WIO %Idle
0.43 0.36 13.7 0.6 9.7 85.7
Instance CPU
~~~~~~~~~~~~
% of total CPU for Instance: 13.5
% of busy CPU for Instance: 94.2
%DB time waiting for CPU - Resource Mgr: 0.0
Memory Statistics
~~~~~~~~~~~~~~~~~ Begin End
Host Mem (MB): 49,152.0 49,152.0
SGA use (MB): 3,072.0 3,072.0
PGA use (MB): 506.5 629.1
% Host Mem used for SGA+PGA: 7.28 7.53
Time Model Statistics
-> Total time in database user-calls (DB Time): 106453.8s
-> Statistics including the word "background" measure background process
time, and so do not contribute to the DB time statistic
-> Ordered by % or DB time desc, Statistic name
Statistic Name Time (s) % of DB Time
sql execute elapsed time 105,531.1 99.1
DB CPU 34,818.8 32.7
parse time elapsed 714.7 .7
hard parse elapsed time 684.8 .6
PL/SQL execution elapsed time 161.9 .2
PL/SQL compilation elapsed time 44.2 .0
connection management call elapsed time 16.9 .0
hard parse (sharing criteria) elapsed time 10.2 .0
hard parse (bind mismatch) elapsed time 9.4 .0
sequence load elapsed time 2.9 .0
repeated bind elapsed time 0.5 .0
failed parse elapsed time 0.0 .0
DB time 106,453.8
background elapsed time 1,753.9
background cpu time 61.7
Operating System Statistics
-> *TIME statistic values are diffed.
All others display actual values. End Value is displayed if different
-> ordered by statistic type (CPU Use, Virtual Memory, Hardware Config), Name
Statistic Value End Value
BUSY_TIME 3,704,415
IDLE_TIME 22,203,740
IOWAIT_TIME 2,517,864
NICE_TIME 3
SYS_TIME 145,696
USER_TIME 3,557,758
LOAD 0 0
RSRC_MGR_CPU_WAIT_TIME 0
VM_IN_BYTES 358,813,045,760
VM_OUT_BYTES 29,514,830,848
PHYSICAL_MEMORY_BYTES 51,539,607,552
NUM_CPUS 8
NUM_CPU_CORES 8
NUM_CPU_SOCKETS 8
GLOBAL_RECEIVE_SIZE_MAX 4,194,304
GLOBAL_SEND_SIZE_MAX 1,048,586
TCP_RECEIVE_SIZE_DEFAULT 87,380
TCP_RECEIVE_SIZE_MAX 4,194,304
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 4,194,304
TCP_SEND_SIZE_MIN 4,096
Operating System Statistics -
Snap Time Load %busy %user %sys %idle %iowait
29-Feb 03:00:27 0.4 N/A N/A N/A N/A N/A
29-Feb 04:00:35 1.4 11.9 11.2 0.6 88.1 14.3
29-Feb 05:00:41 1.7 13.8 13.2 0.6 86.2 15.8
29-Feb 06:00:48 1.5 14.0 13.5 0.6 86.0 12.3
29-Feb 07:01:00 1.8 16.3 15.8 0.5 83.7 10.4
29-Feb 08:00:12 2.6 23.2 22.5 0.6 76.8 12.6
29-Feb 09:00:26 1.3 16.6 16.0 0.5 83.4 5.7
29-Feb 10:00:33 1.2 13.8 13.3 0.5 86.2 2.0
29-Feb 11:00:43 1.3 14.5 14.0 0.5 85.5 3.8
29-Feb 12:00:47 0.4 4.9 4.2 0.7 95.1 10.6
Foreground Wait Class
-> s - second, ms - millisecond - 1000th of a second
-> ordered by wait time desc, waits desc
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
-> Captured Time accounts for 97.9% of Total DB time 106,453.79 (s)
-> Total FG Wait Time: 69,415.64 (s) DB CPU time: 34,818.79 (s)
Avg
%Time Total Wait wait
Wait Class Waits -outs Time (s) (ms) %DB time
User I/O 14,693,843 0 69,222 5 65.0
DB CPU 34,819 32.7
Commit 40,629 0 119 3 0.1
System I/O 26,504 0 57 2 0.1
Network 1,945,010 0 11 0 0.0
Other 125,200 99 4 0 0.0
Application 2,673 0 2 1 0.0
Concurrency 3,059 0 1 0 0.0
Configuration 31 19 0 15 0.0
Foreground Wait Events
-> s - second, ms - millisecond - 1000th of a second
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by wait time desc, waits desc (idle events last)
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % DB
Event Waits -outs Time (s) (ms) /txn time
db file sequential read 14,092,706 0 65,613 5 108.0 61.6
read by other session 308,534 0 1,260 4 2.4 1.2
direct path read 97,454 0 987 10 0.7 .9
db file scattered read 71,870 0 910 13 0.6 .9
db file parallel read 35,001 0 372 11 0.3 .3
log file sync 40,629 0 119 3 0.3 .1
control file sequential re 26,504 0 57 2 0.2 .1
direct path read temp 14,499 0 49 3 0.1 .0
direct path write temp 9,186 0 28 3 0.1 .0
SQL*Net message to client 1,923,973 0 5 0 14.7 .0
SQL*Net message from dblin 1,056 0 5 5 0.0 .0
Disk file operations I/O 8,848 0 2 0 0.1 .0
ASM file metadata operatio 36 0 2 54 0.0 .0
SQL*Net break/reset to cli 2,636 0 1 1 0.0 .0
ADR block file read 472 0 1 1 0.0 .0
os thread startup 8 0 1 74 0.0 .0
SQL*Net more data to clien 17,656 0 1 0 0.1 .0
asynch descriptor resize 123,852 100 0 0 0.9 .0
local write wait 110 0 0 4 0.0 .0
utl_file I/O 55,635 0 0 0 0.4 .0
log file switch (private s 8 0 0 52 0.0 .0
cursor: pin S wait on X 2 0 0 142 0.0 .0
enq: KO - fast object chec 13 0 0 20 0.0 .0
PX Deq: Slave Session Stat 248 0 0 1 0.0 .0
enq: RO - fast object reus 18 0 0 11 0.0 .0
latch: cache buffers chain 2,511 0 0 0 0.0 .0
latch: shared pool 195 0 0 1 0.0 .0
CSS initialization 12 0 0 8 0.0 .0
PX qref latch 54 100 0 2 0.0 .0
SQL*Net more data from cli 995 0 0 0 0.0 .0
SQL*Net more data from dbl 300 0 0 0 0.0 .0
kksfbc child completion 1 100 0 56 0.0 .0
library cache: mutex X 244 0 0 0 0.0 .0
PX Deq: Signal ACK RSG 124 0 0 0 0.0 .0
undo segment extension 6 100 0 7 0.0 .0
PX Deq: Signal ACK EXT 124 0 0 0 0.0 .0
library cache load lock 3 0 0 9 0.0 .0
ADR block file write 45 0 0 1 0.0 .0
CSS operation: action 12 0 0 2 0.0 .0
reliable message 28 0 0 1 0.0 .0
CSS operation: query 72 0 0 0 0.0 .0
latch: row cache objects 14 0 0 1 0.0 .0
enq: SQ - contention 17 0 0 0 0.0 .0
latch free 32 0 0 0 0.0 .0
buffer busy waits 52 0 0 0 0.0 .0
enq: PS - contention 16 0 0 0 0.0 .0
enq: TX - row lock content 6 0 0 1 0.0 .0
SQL*Net message to dblink 1,018 0 0 0 0.0 .0
cursor: pin S 23 0 0 0 0.0 .0
latch: cache buffers lru c 8 0 0 0 0.0 .0
SQL*Net message from clien 1,923,970 0 944,508 491 14.7
jobq slave wait 66,732 100 33,334 500 0.5
Streams AQ: waiting for me 6,481 100 32,412 5001 0.0
wait for unread message on 32,858 98 32,411 986 0.3
PX Deq: Execution Msg 1,448 0 190 131 0.0
PX Deq: Execute Reply 1,196 0 74 62 0.0
HS message to agent 228 0 4 19 0.0
single-task message 42 0 4 97 0.0
PX Deq Credit: send blkd 904 0 2 3 0.0
PX Deq Credit: need buffer 205 0 1 3 0.0
Foreground Wait Events
-> s - second, ms - millisecond - 1000th of a second
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by wait time desc, waits desc (idle events last)
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % DB
Event Waits -outs Time (s) (ms) /txn time
PX Deq: Table Q Normal 4,291 0 1 0 0.0
PX Deq: Join ACK 124 0 0 1 0.0
PX Deq: Parse Reply 124 0 0 0 0.0
KSV master wait 256 0 0 0 0.0
Latch Miss Sources
-> only latches with sleeps are shown
-> ordered by name, sleeps desc
NoWait Waiter
Latch Name Where Misses Sleeps Sleeps
ASM map operation freeli kffmTranslate2 0 2 0
DML lock allocation ktadmc 0 2 0
FOB s.o list latch ksfd_allfob 0 2 2
In memory undo latch ktiFlushMe 0 5 0
In memory undo latch ktichg: child 0 3 0
PC and Classifier lists No latch 0 6 0
Real-time plan statistic keswxAddNewPlanEntry 0 20 20
SQL memory manager worka qesmmIRegisterWorkArea:1 0 1 1
active service list kswslogon: session logout 0 23 12
active service list kswssetsvc: PX session swi 0 6 1
active service list kswsite: service iterator 0 1 0
archive process latch kcrrgpll 0 3 3
cache buffers chains kcbgtcr_2 0 1,746 573
cache buffers chains kcbgtcr: fast path (cr pin 0 1,024 2,126
cache buffers chains kcbgcur_2 0 60 8
cache buffers chains kcbchg1: kslbegin: bufs no 0 16 3
cache buffers chains kcbgtcr: fast path 0 14 20
cache buffers chains kcbzibmlt: multi-block rea 0 10 0
cache buffers chains kcbrls_2 0 9 53
cache buffers chains kcbgtcr: kslbegin shared 0 8 1
cache buffers chains kcbrls_1 0 7 84
cache buffers chains kcbgtcr: kslbegin excl 0 6 14
cache buffers chains kcbnew: new latch again 0 6 0
cache buffers chains kcbzgb: scan from tail. no 0 6 0
cache buffers chains kcbzwb 0 5 8
cache buffers chains kcbgcur: fast path (shr) 0 3 0
cache buffers chains kcbget: pin buffer 0 3 0
cache buffers chains kcbzhngcbk2_1 0 1 0
cache buffers lru chain kcbzgws 0 19 0
cache buffers lru chain kcbo_link_q 0 3 0
call allocation ksuxds 0 14 10
call allocation ksudlp: top call 0 2 3
enqueue hash chains ksqgtl3 0 2 1
enqueue hash chains ksqrcl 0 1 2
enqueues ksqgel: create enqueue 0 1 0
object queue header oper kcbo_unlink_q 0 5 2
object queue header oper kcbo_sw_buf 0 2 0
object queue header oper kcbo_link_q 0 1 2
object queue header oper kcbo_switch_cq 0 1 2
object queue header oper kcbo_switch_mq_bg 0 1 4
parallel query alloc buf kxfpbalo 0 1 1
process allocation ksucrp:1 0 2 0
process queue reference kxfpqrsnd 0 1 0
qmn task queue latch kwqmnmvtsks: delay to read 0 1 0
redo allocation kcrfw_redo_gen: redo alloc 0 17 0
row cache objects kqreqd: reget 0 6 0
row cache objects kqrpre: find obj 0 6 13
row cache objects kqrso 0 2 0
row cache objects kqreqd 0 1 2
row cache objects kqrpre: init complete 0 1 1
shared pool kghalo 0 199 106
shared pool kghupr1 0 39 109
shared pool kghfre 0 18 19
shared pool kghalp 0 7 29
space background task la ktsj_grab_task 0 21 27
Mutex Sleep Summary
-> ordered by number of sleeps desc
Wait
Mutex Type Location Sleeps Time (ms)
Library Cache kglhdgn2 106 338 12
Library Cache kgllkc1 57 259 10
Library Cache kgllkdl1 85 123 21
Cursor Pin kkslce [KKSCHLPIN2] 70 286
Library Cache kglget2 2 31 1
Library Cache kglhdgn1 62 31 2
Library Cache kglpin1 4 26 1
Library Cache kglpnal1 90 18 0
Library Cache kglpndl1 95 15 2
Library Cache kgllldl2 112 6 0
Library Cache kglini1 32 1 0
-------------------------------------------------------------Thanks in advance.Hi,
Thanks for reply.
I provided one hour report.
Inst Num Startup Time Release RAC
1 27-Feb-12 09:03 11.2.0.2.0 NO
Platform CPUs Cores Sockets Memory(GB)
Linux x86 64-bit 8 8 8 48.00
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 5606 29-Feb-12 04:00:35 63 3.7
End Snap: 5607 29-Feb-12 05:00:41 63 3.6
Elapsed: 60.11 (mins)
DB Time: 382.67 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 1,952M 1,952M Std Block Size: 16K
Shared Pool Size: 1,024M 1,024M Log Buffer: 18,868K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ --------------- --------------- ---------- ----------
DB Time(s): 6.4 0.8 0.03 0.03
DB CPU(s): 1.0 0.1 0.00 0.00
Redo size: 84,539.3 10,425.6
Logical reads: 23,345.6 2,879.1
Block changes: 386.5 47.7
Physical reads: 1,605.0 197.9
Physical writes: 7.1 0.9
User calls: 233.9 28.9
Parses: 4.0 0.5
Hard parses: 0.1 0.0
W/A MB processed: 0.1 0.0
Logons: 0.1 0.0
Executes: 210.9 26.0
Rollbacks: 0.0 0.0
Transactions: 8.1
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.62 Redo NoWait %: 100.00
Buffer Hit %: 95.57 In-memory Sort %: 100.00
Library Hit %: 99.90 Soft Parse %: 98.68
Execute to Parse %: 98.10 Latch Hit %: 99.99
Parse CPU to Parse Elapsd %: 32.08 % Non-Parse CPU: 99.90
Shared Pool Statistics Begin End
Memory Usage %: 89.25 89.45
% SQL with executions>1: 96.79 97.52
% Memory for SQL w/exec>1: 95.67 96.56
Top 5 Timed Foreground Events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avg
wait % DB
Event Waits Time(s) (ms) time Wait Class
db file sequential read 3,054,464 17,002 6 74.0 User I/O
DB CPU 3,748 16.3
read by other session 199,603 796 4 3.5 User I/O
direct path read 46,301 439 9 1.9 User I/O
db file scattered read 21,113 269 13 1.2 User I/O
Host CPU (CPUs: 8 Cores: 8 Sockets: 8)
~~~~~~~~ Load Average
Begin End %User %System %WIO %Idle
1.45 1.67 13.2 0.6 15.8 86.2
Instance CPU
~~~~~~~~~~~~
% of total CPU for Instance: 13.0
% of busy CPU for Instance: 94.7
%DB time waiting for CPU - Resource Mgr: 0.0
Memory Statistics
~~~~~~~~~~~~~~~~~ Begin End
Host Mem (MB): 49,152.0 49,152.0
SGA use (MB): 3,072.0 3,072.0
PGA use (MB): 513.5 467.7
% Host Mem used for SGA+PGA: 7.29 7.20
Time Model Statistics
-> Total time in database user-calls (DB Time): 22960.5s
-> Statistics including the word "background" measure background process
time, and so do not contribute to the DB time statistic
-> Ordered by % or DB time desc, Statistic name
Statistic Name Time (s) % of DB Time
sql execute elapsed time 22,835.9 99.5
DB CPU 3,748.4 16.3
parse time elapsed 15.4 .1
hard parse elapsed time 14.3 .1
PL/SQL execution elapsed time 7.5 .0
PL/SQL compilation elapsed time 6.0 .0
connection management call elapsed time 1.6 .0
sequence load elapsed time 0.4 .0
hard parse (sharing criteria) elapsed time 0.0 .0
repeated bind elapsed time 0.0 .0
failed parse elapsed time 0.0 .0
DB time 22,960.5
background elapsed time 238.1
background cpu time 4.9
Operating System Statistics
-> *TIME statistic values are diffed.
All others display actual values. End Value is displayed if different
-> ordered by statistic type (CPU Use, Virtual Memory, Hardware Config), Name
Statistic Value End Value
BUSY_TIME 396,506
IDLE_TIME 2,483,725
IOWAIT_TIME 455,495
NICE_TIME 0
SYS_TIME 16,163
USER_TIME 380,052
LOAD 1 2
RSRC_MGR_CPU_WAIT_TIME 0
VM_IN_BYTES 95,646,943,232
VM_OUT_BYTES 1,686,059,008
PHYSICAL_MEMORY_BYTES 51,539,607,552
NUM_CPUS 8
NUM_CPU_CORES 8
NUM_CPU_SOCKETS 8
GLOBAL_RECEIVE_SIZE_MAX 4,194,304
GLOBAL_SEND_SIZE_MAX 1,048,586
TCP_RECEIVE_SIZE_DEFAULT 87,380
TCP_RECEIVE_SIZE_MAX 4,194,304
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 4,194,304
TCP_SEND_SIZE_MIN 4,096
Operating System Statistics -
Snap Time Load %busy %user %sys %idle %iowait
29-Feb 04:00:35 1.4 N/A N/A N/A N/A N/A
29-Feb 05:00:41 1.7 13.8 13.2 0.6 86.2 15.8
Foreground Wait Class
-> s - second, ms - millisecond - 1000th of a second
-> ordered by wait time desc, waits desc
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
-> Captured Time accounts for 97.6% of Total DB time 22,960.46 (s)
-> Total FG Wait Time: 18,651.75 (s) DB CPU time: 3,748.35 (s)
Avg
%Time Total Wait wait
Wait Class Waits -outs Time (s) (ms) %DB time
User I/O 3,327,253 0 18,576 6 80.9
DB CPU 3,748 16.3
Commit 23,882 0 69 3 0.3
System I/O 1,035 0 3 3 0.0
Network 842,393 0 2 0 0.0
Other 10,120 99 0 0 0.0
Configuration 3 0 0 58 0.0
Application 264 0 0 1 0.0
Concurrency 1,482 0 0 0 0.0
Foreground Wait Events
-> s - second, ms - millisecond - 1000th of a second
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by wait time desc, waits desc (idle events last)
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % DB
Event Waits -outs Time (s) (ms) /txn time
db file sequential read 3,054,464 0 17,002 6 104.5 74.0
read by other session 199,603 0 796 4 6.8 3.5
direct path read 46,301 0 439 9 1.6 1.9
db file scattered read 21,113 0 269 13 0.7 1.2
log file sync 23,882 0 69 3 0.8 .3
db file parallel read 4,727 0 68 14 0.2 .3
control file sequential re 1,035 0 3 3 0.0 .0
SQL*Net message to client 840,792 0 2 0 28.8 .0
direct path read temp 95 0 2 18 0.0 .0
local write wait 79 0 0 4 0.0 .0
Disk file operations I/O 870 0 0 0 0.0 .0
ASM file metadata operatio 4 0 0 50 0.0 .0
log file switch (private s 3 0 0 58 0.0 .0
ADR block file read 36 0 0 3 0.0 .0
enq: RO - fast object reus 5 0 0 16 0.0 .0
latch: cache buffers chain 1,465 0 0 0 0.1 .0
SQL*Net break/reset to cli 256 0 0 0 0.0 .0
asynch descriptor resize 10,059 100 0 0 0.3 .0
SQL*Net more data to clien 1,510 0 0 0 0.1 .0
enq: KO - fast object chec 3 0 0 8 0.0 .0
SQL*Net more data from cli 91 0 0 0 0.0 .0
latch: shared pool 14 0 0 0 0.0 .0
ADR block file write 5 0 0 1 0.0 .0
reliable message 8 0 0 0 0.0 .0
direct path write temp 1 0 0 2 0.0 .0
SQL*Net message from clien 840,794 0 68,885 82 28.8
jobq slave wait 7,365 100 3,679 499 0.3
Streams AQ: waiting for me 721 100 3,605 5000 0.0
wait for unread message on 3,648 98 3,603 988 0.1
KSV master wait 20 0 0 0 0.0
Background Wait Events
-> ordered by wait time desc, waits desc (idle events last)
-> Only events with Total Wait Time (s) >= .001 are shown
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % bg
Event Waits -outs Time (s) (ms) /txn time
log file parallel write 29,353 0 83 3 1.0 34.8
db file parallel write 5,753 0 17 3 0.2 6.9
db file sequential read 1,638 0 15 9 0.1 6.1
control file sequential re 5,142 0 13 2 0.2 5.4
os thread startup 140 0 8 58 0.0 3.4
control file parallel writ 1,440 0 8 6 0.0 3.4
log file sequential read 304 0 8 26 0.0 3.3
db file scattered read 214 0 2 9 0.0 .8
ASM file metadata operatio 1,199 0 1 1 0.0 .3
direct path write 35 0 0 6 0.0 .1
direct path read 41 0 0 5 0.0 .1
kfk: async disk IO 6 0 0 9 0.0 .0
Disk file operations I/O 1,266 0 0 0 0.0 .0
ADR block file read 16 0 0 2 0.0 .0
read by other session 3 0 0 8 0.0 .0
Log archive I/O 2 0 0 10 0.0 .0
log file sync 3 0 0 5 0.0 .0
asynch descriptor resize 341 100 0 0 0.0 .0
CSS initialization 1 0 0 6 0.0 .0
log file single write 4 0 0 1 0.0 .0
latch: redo allocation 3 0 0 1 0.0 .0
ADR block file write 5 0 0 1 0.0 .0
LGWR wait for redo copy 45 0 0 0 0.0 .0
CSS operation: query 6 0 0 0 0.0 .0
CSS operation: action 1 0 0 1 0.0 .0
SQL*Net message to client 420 0 0 0 0.0 .0
rdbms ipc message 47,816 39 61,046 1277 1.6
DIAG idle wait 7,200 100 7,200 1000 0.2
Space Manager: slave idle 1,146 98 5,674 4951 0.0
class slave wait 284 0 3,983 14026 0.0
dispatcher timer 61 100 3,660 60006 0.0
Streams AQ: qmn coordinato 258 50 3,613 14003 0.0
Streams AQ: qmn slave idle 130 0 3,613 27789 0.0
Streams AQ: waiting for ti 7 71 3,608 515430 0.0
wait for unread message on 3,605 100 3,606 1000 0.1
pmon timer 1,201 100 3,604 3001 0.0
smon timer 15 73 3,603 240207 0.0
ASM background timer 754 0 3,602 4777 0.0
shared server idle wait 120 100 3,601 30006 0.0
SQL*Net message from clien 554 0 4 7 0.0
KSV master wait 101 0 0 2 0.0
Wait Event Histogram
-> Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
-> % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
-> % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
-> Ordered by Event (idle events last)
% of Waits
Total
Event Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 52 73.1 1.9 9.6 13.5 1.9
ADR block file write 10 100.0
ADR file lock 12 100.0
ARCH wait for archivelog l 3 100.0
ASM file metadata operatio 1203 97.3 .5 .7 .3 .2 .9
CSS initialization 1 100.0
CSS operation: action 1 100.0
CSS operation: query 6 83.3 16.7
Disk file operations I/O 2118 95.4 4.5 .1
LGWR wait for redo copy 45 100.0
Log archive I/O 2 100.0
SQL*Net break/reset to cli 256 99.6 .4
SQL*Net message to client 839.9 100.0 .0
SQL*Net more data from cli 91 100.0
SQL*Net more data to clien 1503 100.0
asynch descriptor resize 10.4K 100.0
buffer busy waits 2 100.0
control file parallel writ 1440 5.7 35.1 24.0 16.3 12.0 5.5 1.5
control file sequential re 6177 69.4 7.5 5.9 8.1 7.1 1.7 .3
db file parallel read 4727 1.7 3.2 3.2 10.1 46.6 33.3 1.8
db file parallel write 5755 42.3 21.3 18.6 11.2 4.6 1.4 .5
db file scattered read 21.5K 8.4 4.3 11.9 18.9 26.3 25.3 4.9
db file sequential read 3053. 28.7 15.1 11.1 17.9 21.5 5.4 .3 .0
direct path read 46.3K 9.9 8.8 18.5 21.7 22.8 15.7 2.7
direct path read temp 95 9.5 9.5 23.2 49.5 8.4
direct path write 35 11.4 31.4 17.1 22.9 11.4 2.9 2.9
direct path write temp 1 100.0
enq: KO - fast object chec 3 66.7 33.3
enq: RO - fast object reus 5 20.0 20.0 20.0 20.0 20.0
kfk: async disk IO 6 50.0 16.7 16.7 16.7
latch free 3 100.0
latch: cache buffers chain 1465 100.0
latch: cache buffers lru c 1 100.0
latch: object queue header 2 100.0
latch: redo allocation 3 33.3 33.3 33.3
latch: row cache objects 2 100.0
latch: shared pool 15 93.3 6.7
local write wait 79 35.4 34.2 21.5 8.9
log file parallel write 29.4K 47.8 21.7 11.9 9.9 6.8 1.6 .3
log file sequential read 304 6.3 3.0 3.6 10.2 23.4 24.3 29.3
log file single write 4 25.0 75.0
log file switch (private s 3 100.0
log file sync 23.9K 40.9 28.0 12.9 9.7 6.7 1.5 .3
os thread startup 140 100.0
read by other session 199.6 37.1 19.9 12.9 13.1 13.8 3.1 .2
reliable message 8 100.0
ASM background timer 755 2.9 .4 .1 .1 .3 .1 .3 95.8
DIAG idle wait 7196 100.0
KSV master wait 121 88.4 2.5 3.3 2.5 .8 .8 1.7
SQL*Net message from clien 840.1 97.1 1.8 .5 .2 .2 .1 .0 .1
Space Manager: slave idle 1147 .1 .5 99.4
Streams AQ: qmn coordinato 258 49.6 .4 50.0
Streams AQ: qmn slave idle 130 .8 99.2
Streams AQ: waiting for me 721 100.0
Streams AQ: waiting for ti 7 28.6 42.9 28.6
class slave wait 283 39.9 2.5 2.5 3.5 4.9 9.2 15.2 22.3
dispatcher timer 60 100.0
jobq slave wait 7360 .0 .0 .0 99.9
pmon timer 1201 100.0
rdbms ipc message 47.8K 2.7 31.6 17.4 1.1 1.1 .9 20.9 24.3
Wait Event Histogram DB/Inst: I2KPROD/I2KPROD Snaps: 5606-5607
-> Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
-> % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
-> % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
-> Ordered by Event (idle events last)
% of Waits
Total
Event Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
shared server idle wait 120 100.0
smon timer 16 6.3 93.8
wait for unread message on 7250 .1 99.9
Latch Miss Sources
-> only latches with sleeps are shown
-> ordered by name, sleeps desc
NoWait Waiter
Latch Name Where Misses Sleeps Sleeps
In memory undo latch ktichg: child 0 1 0
active service list kswslogon: session logout 0 2 0
cache buffers chains kcbgtcr_2 0 1,123 483
cache buffers chains kcbgtcr: fast path (cr pin 0 496 1,131
cache buffers chains kcbrls_2 0 5 6
cache buffers chains kcbgcur_2 0 4 0
cache buffers chains kcbgtcr: fast path 0 3 1
cache buffers chains kcbzwb 0 2 4
cache buffers chains kcbchg1: kslbegin: bufs no 0 1 0
cache buffers chains kcbnew: new latch again 0 1 0
cache buffers chains kcbrls_1 0 1 6
cache buffers chains kcbzgb: scan from tail. no 0 1 0
cache buffers lru chain kcbzgws 0 1 0
object queue header oper kcbo_switch_cq 0 1 0
object queue header oper kcbo_switch_mq_bg 0 1 2
redo allocation kcrfw_redo_gen: redo alloc 0 3 0
row cache objects kqrpre: find obj 0 1 1
row cache objects kqrso 0 1 0
shared pool kghalo 0 13 3
shared pool kghupr1 0 4 15
shared pool kghalp 0 1 0
space background task la ktsj_grab_task 0 2 2
------------------------------------------------------------- -
How to find out batch job failure and taking action:
Normally We will monitor the batch jobs through transaction code sm37 for job monitoring. In SM37 we will give a batch job name date and time as input. In the first step we will check the batch job for the reason failure or check the spool request for the batch job for failures an help in analyzing the error
I understand from the my experience is that the batch may fail due to below reasons.
1.,Data issues : ex: Invalid character in quantity (Meins) field >>>> We will correct the corresponding document with correct value or we will manually run or request the team to rerun the batch job by excluding the problematic documents from the batch job variant so that it may process other documents.
2.Configuration issues : Materials XXXX is not extended for Plant >>>> we will contact the material master team or business to correct the data or we will raise sub contract call with support team to correct he data. Once the data been corrected and will request the team to rerun the batch job.
3.Performance issues : Volume of the data being processed by the batch job ,network problems.>>>Normally these kind of issues we will encounter during the month end process as there will lot of accounting transactions or documents being posted business hence it may cause the batch job failure as there is enough memory to complete the program or select queries in the program will timeout because of volume of the records.
4.Network issues. : Temporary connectivity issues in other partner systems :Outage in other partner systems like APO or other system like GTS will cause the batch job failure as Batch job not in position to connect other system to get the inforamtion and proceed for further steps.Nornmally we will check RFC destination status by running a custom program weather connectivity between system are in progress or not. then intimate other partner system for the further actions, Once the partner system comes online then we will intimate the team to restart or manually submit batch job.
Some times we will create a manual job by transaction code SM36.I'm not sure what the question is among all that but if you want to check on jobs that are viewable via SM37 and started via SM36. The tables are TBTCP -Background Job Step Overview and TBTCO - Job Status Overview Table.
You can use the following FM to get job details:
GET_JOB_RUNTIME_INFO - Reading Background Job Runtime Data -
Cache and performance issue in browsing SSAS cube using Excel for first time
Hello Group Members,
I am facing a cache and performance issue for the first time, when I try to open a SSAS cube connection using Excel (using Data tab -> From Other Sources --> From Analysis Services) after daily cube refresh. In end users
system (8 GB RAM), for the first time, it takes 10 minutes to open the cube. From next run onwards, its open up quickly within 10 secs.
We have daily ETL process running in high end servers. The configuration of dedicated SSAS cube server is 8 core, 64GB RAM. In total we have 4 cubes - out of which for 3 is full cube refresh and 1 is incremental refresh. We have seen after
daily cube refresh, it takes 10 odd minutes to open the cube in end users system. From next time onwards, it opens up really fast with 10 secs. After cube refresh, in server systems (16 GB RAM), it takes 2 odd minutes to open the cube.
Is there, any way we could reduce the time taken for first attempt ?
Best Regards, Arka Mitra.Thanks Richard and Charlie,
We have implemented the solution/suggestions in our DEV environment and we have seen a definite improvement. We are waiting this to be deployed in UAT environment to note down the actual performance and time improvement while browsing the cube for the
first time after daily cube refresh.
Guys,
This is what we have done:
We have 4 cube databases and each cube db has 1-8 cubes.
1. We are doing daily cube refresh using SQL jobs as follows:
<Batch xmlns="http://schemas.microsoft.com/analysisservices/2003/engine">
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<Object>
<DatabaseID>FINANCE CUBES</DatabaseID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>
2. Next we are creating a separate SQL job (Cache Warming - Profitability Analysis) for cube cache warming for each single cube in each cube db like:
CREATE CACHE FOR [Profit Analysis] AS
{[Measures].members}
*[TIME].[FINANCIAL QUARTER].[FINANCIAL QUARTER]
3. Finally after each cube refresh step, we are creating a new step of type T-SQL where we are calling these individual steps:
EXEC dbo.sp_start_job N'Cache Warming - Profit Analysis';
GO
I will update the post after I receive the actual im[provement from UAT/ Production environment.
Best Regards, Arka Mitra. -
Performance issue related to OWM? Oracle version is 10.2.0.4
The optimizer picks hash join instead of nested loop for the queries with OWM tables, which causes full table scan everywhere. I wonder if it happens in your databases as well, or just us. If you did and knew what to do to solve this, it would be great appriciated! I did log in a SR to Oracle but it usually takes months to reach the solution.
Thanks for any possible answers!Ha, sounded like you knew what I was talking about :)
I thought the issue must've had something to do with OWM because some complicate queries have no performance issue while they're regular tables. There's a batch job which took an hour to run now it takes 4.5 hours. I just rewrote the job to move the queries from OWM to regular tables, it takes 20 minutes. However today when I tried to get explain plans for some queries involve regular tables with large amount of data, I got the same full table scan problem with hash join. So I'm convinced that it probably is not OWM. But the patch for removing bug fix didn't help with the situation here.
I was hoping that other companies might have this problem and had a way to work around. If it's not OWM, I'm surprised that this only happens in our system.
Thanks for the reply anyway!
Maybe you are looking for
-
Hello and thanks in advance for the help. I am new to itunes and the ipod. My wife has had an ipod for over a year and I finally decided to get one too. We both share the same computer, but I do not want to share music with her or her with me. What i
-
Name convention, Capture vs Projects
Hi, I am to start capture about 60 tapes (SVHS-C) from my VHS player thru Canopus ADVC-55 in DV format using Premiere Pro (PP). Doing so I create a "Capture" project in PP, only to get the DV file to a scratch disk mostly named/structed accerdence t
-
SQL query for tomcat certs in CUCM 8.6
I have a query to see the server names and serial numbers, but I'm trying to expand that a bit. I want to look for a specific serial number. Here's my command: run sql select pkid,servername,serialnumber, from certificate where serialnumber = '265dbf
-
Creating Customer from employee who is hired in HR
Hi Please tell me if there is some way to create customer records from employee record created in HR Is there any report or transaction available that will create a customer record by using/copying the HR employee record without entering data again.
-
I have tried to print from my MacBook to my HP Photosmart 1215 without consistent success. I'm most likely to get the following error message "GenericClass: waiting for device." I downloaded the latest HPPhotosmart_Installer10.2-10.4.dmg, which event