Batch key-X,1,2 in process order material assignment tab

hi all
What is the significance of Batch key X , 1, 2 in the process order .When I carry out material availabilty check the material with the batch key ' X ' is giving problem. also on release of order giving pop-up of insufficient batch determination
That is the material with the batch key ' X ' is available in stock in sufficient quantities but it is showing in the missing parts list and also not allowing me to carryout batch determination . How to change the batch key of this material .
regards

Dear,
Please refer my reply from this thread,
Material Availability check
Regards,
R.Brahmankar

Similar Messages

  • Batch determination issue in process order Material quantity calculation

    Dear Gurus,
    We are facing issue in auto batch determination in process order (Material quantity calculation ).
    eg Material X  is active material 200 KIA used in BOM as
    10  X   200  KIA  
    20  Y   10           Filler
    30  Z
    40  X   200  KIA
    50  Y
    60  Z
    We select line item 10 and 40 and do Batch determination system proposes 2 batches for line item 10 as Batch A and B
    and for line 40 again Batch A (with 0.01 KIA) and batch B proposed which is wrong.
    For line Item 10 Batch A and B
    For line Item 40 Batch B and C or as per FIFO logic.
    As Batch A should be consumed in Line item 10 then it proposed Batch B and so on....
    We have already maintain data in COB1.
    Can any body explain what is wrong in determination.
    Regards,
    J.H.Pert

    Hi Pert,
    Follow the below link you have some idea OK.
    Any questions revert me back.
    Batch search strategy
    Regards,
    Madhu.G

  • Display Process Order: Material List -- MRP Distribution Key fiels

    Hi,
    In Display Process Order: Material List, the field of "MRP Distribution Key (RESBD-VERTI or RESB-VERTI) is coming as editable field (Even in Display mode of process order). Is this is standard? Or some configuration is there to make it editable or non editable field even in Display mode of process order?
    Thanks & Regards,
    Surajit Das

    Hi,
    Do you mean BOM component of process order ?
    Deleted mark represent that this material will no longer be used in process order i .e . material will not be issued if it has deletion mark in process order.
    Deletion mark will only come if you delete a component after releasing order. If you delete a component before release then it will not be visible as BOM component of process order.
    Vishal

  • Batch Number field in IDoc for Process Orders (message type LOIPRO01)

    Hello PP experts,
    Just wanted to ask if anyone of you have worked with message type LOIPRO01 (IDoc for process orders)
    There is a segment-field in this IDoc  E1RESBL-CHARG which has description of "Batch Number"
    We tried to assign a Bath Number for an Order (using t-code COR2 --> "Goods Recpt" tab under "Receipt" section), generated an IDoc for this order, but upon checking the E1RESBL-CHARG field of the IDoc it is not populated with the Batch Number.
    The material in the process order is FERT, so technically we're trying to assign a Batch Number in one of the process orders for a Finished Goods material type,  so not on the component level.
    Can anyone here verify:
    1. is the E1RESBL-CHARG field of IDoc LOIPRO01 intended for the Product Batch Number?  If Yes, how do we populate that for in the IDoc?  --> Do I need to have a Reservation/Dependent Requirement for the Product for the Batch Number to be populated in the IDoc?
    2. If E1RESBL-CHARG can not be populated for a Product that has no Reservation/Dependent Requirements, Do I have any option of populating this field with just the Batch Number assigned to the Process Order of that product?

    Solved - LOIPRO01 IDoc does not pick up the Batch Number from AFPO table, instead from table RESB.    We need batch from AFPO and just created a lookup using the Process Order Number as import param

  • Table for Process order Material movement.

    Hi experts,
    which table store process order material movement data
    movement type 309 261 etc.

    there are no ther tables, why would someone have two tables containing same info??? it would be redundant.
    MSEG is not really slow when you do qualified selects, if you can not do that you shopuld think about creating an index.

  • Warning message during batch determination while doing GR for process order

    Hi Experts,
    During delivery against process order for all SFGs and FGs, we are getting warning message u201CInvalid batch according to selection criteria in batch determinationu201D.
    Following settings maintained for batch determination in process order.
    Condition table for order/material type maintained
    Access sequence maintained for order/material type
    In strategy type above access sequence has been maintained. The common class and sort sequence created for all materials in the plant have also been assigned to this strategy type. In batch split changes allowed box has been checked and quantity proposal maintained as 1.
    In search procedure control maintained for order/material type. Search procedure has been assigned to all process order types and check activated.
    In spite of the above when GR for order is taking place , system is throwing warning message.
    GI of components is being done through backflush and without any warning message.
    Please advise how to ensure proper batch determination during GR against order.
    Regards
    Sm.

    Issue resolved by removing required indicators from characteristics which were not being valuated but were maintained in the class assigned to SFGs/FGs.
    Regards
    Sm.

  • Batch specific unit of measure in process order

    Hello,
    I have a BOM with a component with active ingredient.
    Batches are classified and transaction MMBE shown stock correctly in both units.
    But when creating the process order I get two items with same item numer in the material list.
    One for batch specifiv unit of measure which is fine.
    I also get another line in the base unit of measure.
    In table RESB both records have movement allowed so they show up in MIGO.
    This increases the total requirements for the component.
    What is happening??
    Best regards,
    TOr

    Thanks for caring!
    As for transaction MMBE it all looks fine. So basic definitions must be OK up to that point.
    I think the point is to set requirement for the amount of active ingredient.
    Do the batch determination for this.
    Do the goods issue in physcial quantity which is the base unit of measure.
    I did try now with KG in the BOM. I still get  double items in the process order. Now both in KG.
    One line is correclty copied.
    The incorrect line which is the same in both cases says 1 KG. which is the correct conversion from  0,01KAI.
    Regards,
    Tor

  • Batch determination for raw materials in process order

    I have defined a sort rule, batch search strategy and assiigned this strategy to process order type.classification for batch is also defined with charecterstic mentioned in sort rule.But when i am doing BD for raw materials in Process order , it is barnching into some other screen saying, no selection criteria and no strategy info defined. what are the necessary settings to make BD possible for all the materials having batch management.

    Hi
    Config Setting In Batch Management
    This will help you for config setting:
    Logistics general - Batch Management
    1.1. Specify Batch Level
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Specify batch level and activate batch status management Transaction  OMCT
    1.2. Batch Number - Activate Internal Number Assignment
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Number Assignment --> Activate internal batch number assignment Transaction  OMCZ
    1.3. Batch Creation - for Goods Movements 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Creation of new batches --> Define batch creation for goods movements Transaction
    1.4. Characteristic Value Assignment -- Update Standard Characteristics 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Update Standard Characteristics Transaction
    1.5. Activate Batch Classification for Goods Movements in Inventory Management 
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Characteristic Value Assignment --> Valuation for goods movements --> Activate Batch Classification for goods movements in Inventory Management Transaction  OMCV
    1.6. Batch Determination u2013 Condition Table(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define production order condition tables Transaction  OPLB
    1.7. Batch Determination u2013 Condition Table(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Condition Tables --> Define SD condition Tables Transaction  V/C7
    1.8. Batch Determination u2013 Access Sequence(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define Production Order Access Sequences Transaction  OPLF
    1.9. Batch Determination u2013 Access Sequence(Cross Client)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Access Sequences --> Define SD Access Sequences Transaction  V/C2
    1.10. Batch Determination u2013 Strategy Types
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production Order Strategy Types Transaction  OPLE
    1.11. Batch Determination u2013 Strategy Types
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Strategy Types Transaction  V/C1
    1.12.  Batch Determination u2013 Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define IM   Search Procedure Transaction  OMCY
    1.13.  Batch Determination u2013 Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Production order Search Procedure Transaction  OPLG
    1.14.  Batch Determination u2013 Batch Search Procedure
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define SD Search Procedure Transaction  V/C3
    1.15.  Batch Determination u2013 Batch Search Procedure Allocation
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate IM search procedure/activate check Transaction  OMCG
    1.16. Batch Determination u2013 Batch Search Procedure Allocation
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Assign Search procedure to production order Transaction  OPL8
    1.17.  Batch Determination u2013 Batch Search Procedure Allocation(SD)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Allocate SD Search procedure Transaction  V/C5
    1.18.  Batch Determination u2013 Activate Automatic Batch Determination(SD)
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Activate Automatic Batch Determination in SD -->For delivery item categories Transaction  V/CL
    1.19.  Batch Determination u2013 Batch Selection Class
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Selection Classes Transaction  CL01
    1.20.  Batch Determination u2013 Sort Rule
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Batch Determination & Batch Check --> Define Sort Rules Transaction  CU70
    1.21.   Batch Determination u2013 Make Settings for Batch Where-used list
    Menu Path  Enterprise Structure> Logistics General> Batch Management --> Make Settings for Batch Where-used list Transaction  OMBB              
    regards
    Faisal

  • How to determine the oldest batch to the components of a process order??

    Hi gurus,
    While releasing I have configures to determine automatically the batches at order release, I want that system assign for each component of the process order the oldedst batch ( I can control wich batch is older because is a consecutive number so assigning the smallest batch should work)
    Right now system doesn't allow to to release because is asking for the batch for each material, so it seems to me that the batch determination is not happening, I created a batch and a characteristic but I dont know if this must be done of if I have to do something else, please guide me trough the steps needed to achieve this with Tcodes.
    Thanks
    Julio

    Hi Julio
    I hope you want to use the FIFO method for the batch Determination,,
    it can be done through STD config settings,,
    1. Characteristics for the LAST GR date-CT04
    2. Batch sort rule-CU70
    3. Define the batch determination for the Process orders-COB1
    In the Batch master there is a Field - Last GR date,, you have to maintain this as a Characteristics and make as automatic populate field based on the LAST GR field from Basic Data1 from the Batch Master,,
    This field you ref on Batch Sort rule.. and Define the batch determination how it has to pick (like- Split batch, One after other)
    After this at the time of issue the goods click the Batch determination- it will provide the list of batches,, if not picj the rules first time, there itself you can select the rules and assign to get the batch list by last GR date
    Ref the below links for further details
    http://www.sap-img.com/materials/lifo-and-fifo-in-batch-management.htm
    http://www.sap-img.com/materials/config-setting-in-batch-management.htm
    Thanks
    Senthil

  • Show batch clasification char val of the production order material in COOIS

    I want to display a characteristic value entered in the material batch classification of the production order material in COOIS report.
    Ex: I maintain material stock code in material batch classification. Within the same material there can be multiple stock codes which is similar to dye lot number. I created production order for that material. I want to display that batch classification characteristic of the material in a separate column when display production orders of that martial in COOIS.

    Dear,
    Have you use the process batch? The classification characteristics of each process batch created for a production order are compared with the actual configuration characteristics.
    If different characteristics are used for the classification, that is, if characteristics do not exist in the configuration, these characteristics are flagged as green by default in the detailed display.
    Call interface:
    An interface (parameter of the function module) can be used to call function module MILL_PC1_COMP_LIST outside C003, C011N from COOIS.
    Or Call Transaction SE38 report PPIOA000  execute it.
    You can refer the OSS note 519649 for it.
    Regards,
    R.Brahmankar

  • Creation of Process Order without assigning master recipe

    Hi,
    I want to create a process order without having default master recipe for the given material or default operation for the given order type. I want the user to select the master recipe manually in process order. We do not want to use production version also.
    We can define the default operation for the order type (OPJG) so that we can create a process order. I do not want a default operation in the process order but the user should select a valid master recipe. If we have default operation in the process order, it serves no purpose as it is never used anywhere.
    Is there any way we can achieve this?
    Regards,

    Hi,
    Please find the required details and conditions for creating process orders without master recipe.
    http://help.sap.com/saphelp_47x200/helpdata/en/89/a42cb3461e11d182b50000e829fbfe/frameset.htm
    Regards
    Kannan

  • Display process order material wise planned cost

    Hi
    When I display process order CO03 and select variant Cost Trend for cost analysis. System show total figure of raw material.
    My requirement is to check material number wise pland qty and value for a process order. Planned Activity Qty and Actual Qty with value
    thanks

    Thanks for reply
    Here is a ABAP report requirment on following format please help me.
    Product :: Description ::  Raw mat :: Planned Mat Qty :: Act Qty :: Planned Mat Cost :: Act Mat cost
    9000     :: Milk           :: 100000     ::  2000Kg             :: 1900      :: 50000      ::  60,000      
    thanks

  • COR2- Process order material  quantity change

    Hi, I want to change the material quantity of process order with COR2 transaction, could you plese help me out in finding the bapi or function module which will be relevent.

    I have done it through BDC recording, change on first line, then upload using bdc from 2nd line.

  • Process order - material component deleted

    Hi,
    I would like to know where can I check if a material component has been deleted in a created process order. Would there be any history for this?

    Dear,
    in easy easy menu...
    Logistics -> Production -> Shop floor control -> Control -> Order change management ®-> Change process......
    Regards,

  • Process Order Material availability check error

    Dear All,
    At the time of i create the process order after that i push Material availability button system give me the following error log.
    Please provide me the solution how can i resolved following Error.
    "No control data maintained for checking group 01 and checking rule Z1"

    Dear,
    Go to OPJK and maintain the setting for rule Z1 and group 01
    Then go to OPJJ here select your plant and order type then Business funct.1 for order creation then in side assign checking rule Z1 and remove the tick mark for NO check then repeat same setting for Business funct.2 same rule and remove no check.
    Then material master assign the same group after that create the order and check.
    Regards,
    R.Brahmankar

Maybe you are looking for