Batch Loader Email

I am using a process method of serial and I have an email notification code in the batch loader script that is sent out to the admin. The email notifcation has a message based on the Process State. If I am testing with one file, the email sent with no issues. If am testing multiple files, the email is sent out when the last file is loaded. I would like an email sent out to the admin after every file is loaded.
Any suggestions are appreciated.

Yes, I follow you and that's a problem with writing the e-mail notification from within the Batch Loader script that you created.
If you wan to do this in the Batch Loader script that you've made, then you would need to call the BATCHENG for the current BatchID and then call the recordset to list the files collected during the BATCHENG process. Then once you have the list of files, you can do a loop to trigger nofication for each file. I won't be able give you source code for this, but if you go through the Supplemental API in the workbench, it has everything you need.
For example, calling "farsFileListforBatchID" will return a list of all files for the specified BatchID. This works for SERIAL running batches, but there are some issues when running in Parallel.

Similar Messages

TS3899 I keep getting batch loads of old emails uploaded to my IS 4 phone in increments of 100, how do I stop these emails from being sent to my iphone? thanks Patrick

I keep getting batch loads of old emails uploaded to my IS 4 phone in increments of 100, how do i stop these emails from being sent to my iphone? Thanks Patrick

SOLUTION FOR UNREAD COMCAST MAIL...so far, so good
I went to Comcast.net and created a folder titled "Archive 10-2-13" and then went back into my inbox on the site and clicked the 'select all' box at the top of the email page. I could only see what would fit on my screen, but figured out that if I scrolled ALL the way to the very end (which was a l-o-n-g time for 30,000 emails) and then clicked "move to' at the top of the page and chose "Archive 10-2-13"..all my mail went there and no longer comes up as unread on my iPhone.
I don't know if this will work for other POP accounts (Hotmail, etc.) but HALLELUJAH! I have ZERO unread email messages showing!

IStore Images Batch Load Issue

Hello All,
We have been working on setting up a Batch load for product images for our iStore and have run into an issue. First off, this is more of a batch association since we are using already existing items.
The issue we are having is that we are using APPS.IBE_LOGICALCONTENT_GRP.SAVE_DELETE_LGL_CTNT API to tie the images to the items. The process runs without error, but on inspection of the iStore page, the link to the image is bad causing no image to be displayed. Going through the iStore Admin and checking the Catalog / Content everything looks fine.
If I remove the association to the content for the item, apply the change, then re-associate the content and apply, everything works fine. So, it would appear that the content is not the issue. We will be loading 1000+ image associations, so having to manually fix each one is not a very good option.
After creating the Item - Content association, is there another API or something else that needs to be run so that the image correctly shows up on the iStore?
Thanks
Kyle

1. Did you try using save_logical_content API.
2. Did you verify the table IBE_DSP_OBJ_LGL_CTNT, IBE_DSP_LGL_PHYS_MAP. If data exists, Please send me an email to [email protected]
Thanks
RK
925 998 1494
[email protected]
Independent Consultant

Batch loading with sdordf.jar.

Hi Guys
I have just tried a batch load with sdordf.jar.
In my first attempt there was a mistake in the n3 file.
After correcting the file and re running I now get the error.
Connecting to jdbc:oracle:thin:...........
Append mode
Copy existing data out
Just load triples into one column
Temporary table already exists!
java.sql.SQLException: ORA-00955: name is already used by an existing object
ORA-06512: at "MDSYS.SDO_RDF_INTERNAL", line 3326
ORA-06512: at "MDSYS.SDO_RDF_INTERNAL", line 3362
ORA-06512: at "MDSYS.RDF_APIS", line 786
ORA-06512: at line 1
Can anyone tell me what the name of this temporary table is, so that I can get rid of it.
Cheers
Phil

Hi Mellie
After having a little break I have installed the jena patch during which I had to drop the network and model created before.
I tried running a batch load as before but I still get the error message saying the temporary table already exists.
I tried the clean up routine as suggested but get the error.
SQL> exec sdo_rdf.cleanup_batch_load('researchdata')
BEGIN sdo_rdf.cleanup_batch_load('researchdata'); END;
ERROR at line 1:
ORA-13199: Batch load cleanup failed. ORA-00942: table or view does not exist
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF", line 1016
ORA-06512: at "MDSYS.SDO_RDF", line 1022
ORA-06512: at line 1
I run it as mdsys as you said.
Any other suggestions?
Cheers
Phil

Why can't I load email links sent in emails to me on iphone mail account

Hi everytime I try and load email links sent in emails to me on iphone, I keep getting an option to mail it pop up when I press the link or an error message comes up saying "safari cannot download this file"!! This has only started happening the last few days as I could load or download everything emailed to me before that!! Please help me as its doing my head in!! Thanks

Settings>Safari>Clear cookies and data.
Double tap the Home Button, hold down an app, press the little x to remove Safari from multitasking bar.
Open Safari and try again.

Best practice guide for Batch Load utility in Oracle UCM.

Hi,
Is there any best practice guide for Oracle UCM Batch Loader utility.
We are looking for information regarding batch size in terms of number and size of contents. Also is there any loading time standards considering the contents are uploaded in filesystem where filestore provider is configured?
Thanks,
Krishnendu

Hi ,
There are no specific set of steps / practices for batch loading contents to ucm . It would be very much dependent on how many contents does the user have to load to UCM and how well the server is configured in terms of performance .
You can get more details from the following documentation link : http://docs.oracle.com/cd/E21043_01/doc.1111/e10792/c02_settings009.htm
Thanks,
Srinath

Lock Object error during batch load

Batch load was delayed about an hour. First error message in the Server Log said "Object is already locked by user""Error 1053010 processing request [Lock Object]-Disconnecting"Then it went through a series of "Object locked by user admin" and "received client request: create Temporary Object(from user admin)"It did this several times until connection.Although from time to time we have had problems with Objects getting locked and preventing maintenance in the Application Manager. This is the first time that is has prevented a batch load. Does anyone know what could have triggered this during the load process?

This happened to us a lot, I think it's due to people opening objects, then letting their session time out, leaving a phantom lock.We solved the problem by calling the UNLOCKOBJECT function before any dimbuilds. 99.9% of the time this raises an error, "..object x is not locked..", but the rare time that the otl is inadvertently locked, it prevents the script from failing. HTH, Jeff McAhren Dallas, Texas ex to unlock the outline for app/db flash: UNLOCKOBJECT 1, "FLASH" "FLASH" "FLASH"

Batch Loader File Name - Replace/Append?

We employ a custom/smart merge in FDM that automatically removes previously loaded intersections in HFM 11.1.2.1 by appending NODATA lines at the end of our load file based on the information included in the previous load file. In the FDM configurations, users are only able to use the MERGE option when loading data so that this functionality is not subject to override.
We have just purchased and developed a Batch Loader solution that we'd like to pair with this smart merge functionality and I want to be sure that we are requiring appropriate file name configuration based on a MERGE data load setting. If I understand the file name conventions for batch loader correctly, the "RA", "RR", "AR", "AA" suffix at the end of the loader determines whether batch loader runs through a replace or append.
If we want a location's file to replace the previous load file within FDM during the import step, but load all data files to HFM using a merge, should my filename end with "RA"? Also, if someone accidentally uses RR, does changing the Adapter Option (FM11X-G5-ELoadOptMethodVal) to only show Merge protect against a replace load?
Thanks in advance!
S

The Load Tags are as follows:
Load Method for FDM: R,A
Load method for Target System: R,A
That is correct, if you want to do a replace in FDM and a Merge in HFM you would use RA or RM.
RR would perform a replace in FDM and a Replace in HFM.
You would need to test removing the Replace from the option in the adapter and see if it would fail for load.

I just upgraded to 10.9. My exchange email won't load emails that are older than a few weeks old. How do I change this setting so I can see all my mail?

I just upgraded to 10.9. My exchange email won't load emails that are older than a few weeks old. How do I change this setting so I can see all my mail?

Plett81,
I'm having the exact same problem. It does not seem to be a settings issue but rather some sort of "problem" with mac mail. My Exchange provider was able to setup my mailbox on a test machine running Mavericks and everything pulled in fine, however I cannot duplicate on my upgraded system.
I was able to get rebuild my mailbox and get the older messages within my Exchange inbox, however none of my folders and old messages outside of the Inbox are downloading/synching.
**NOTE** I contacted Apple SUpport and they told me to call my email provider. I called my email provider which did as described above and they don't see a problem. SO as suspected it has something to do with the Mavericks update but I'm not sure Apple is willing to help. I might try contacting them one more time and see.

About Batch Loader and Multiload Journal files

Hi, may someone help me in 2 questions/
Can I use Batch Loader to automate process FDM journals and load it to HFM?
And second, is it possible to use multiload excel files for these journals?
Thx
Edited by: user10941958 on Jan 22, 2010 2:54 AM
Edited by: user10941958 on Jan 22, 2010 2:56 AM

You can use the Trial balance file for loading journals. Just select the location and set data value to entity currecy adjustments. The data will go as journal entry even if you use trial balance file but you wont have 2 columns debit and credit only one colum for amount.
Hope this is helpful.
If you find any post helpful or correct please mark it.
Nick

Batch load images (tiff) into table with a BLOB column

Hi,
Does anyone know any third-party tool/software to bulk/batch load images into Oracle table? There is an ETL software to regularly pull the images (tiff) from a ftp server to a directory in the database server. There is no way I can hardcode the image filenames into the control file and use SQL*Loader to load the files. Is there any tool/software that can just grab whatever files in the directory and load them into Oracle. Then, I can write a program to extract the filename from the file already loaded into the table and update the filename column.
Thanks.
Andy

sound like simple scripting to me...
-- SQL loader example
http://www.orafaq.com/wiki/SQL%2ALoader_FAQ#How_does_one_use_SQL.2ALoader_to_load_images.2C_sound_clips_and_documents.3F
-- dynamically build control file
devuser1:/tmp>>touch image1.gif
devuser1:/tmp>>touch image2.jpg
devuser1:/tmp>>touch image3.jpg
devuser1:/tmp>>ls -l image*
-rw-rw-r--   1 devuser1   mygrp           0 Jul 10 11:19 image1.gif
-rw-rw-r--   1 devuser1   mygrp           0 Jul 10 11:19 image2.jpg
-rw-rw-r--   1 devuser1   mygrp           0 Jul 10 11:19 image3.jpg
devuser1:/tmp>>ls -l image* | awk '{ print NR "," $9}'
1,image1.gif
2,image2.jpg
3,image3.jpg
devuser1:/tmp>>echo "LOAD DATA" > t.ctl
devuser1:/tmp>>echo "INFILE *" >> t.ctl
devuser1:/tmp>>echo "..." >> t.ctl
devuser1:/tmp>>echo "BEGINDATA" >> t.ctl
devuser1:/tmp>>ls -l image* | awk '{ print NR "," $9}' >> t.ctl
devuser1:/tmp>>cat t.ctl
LOAD DATA
INFILE *
BEGINDATA
1,image1.gif
2,image2.jpg
3,image3.jpgEdited by: maceyah on Jul 10, 2009 12:42 PM

Loading file in Merge Mode through the batch loader in FDM

Hi,
I have multiple locations loading in replace mode and 1 location loading in merge. We are using the batch loader and following the naming convention specified in the admin guide. Is there a way to specify in the location name to load the file to HFM in merge mode, or does that location need a seperate adapter with the load rule set to merge?
Any assistance would be greatly appreciated

You dont need a spearate adaptor. You can achieve this by changing the naming of the files. I believe u currently use RR option for replacing the data. (seq_<Location>_<Category>_<Peiod>_RR.txt). You can use A or R appropriately in your load method.

FDMEE : Batch Loader Issue

Dear All,
I am facing problem with Batch loader. It was working fine earlier but not now. The changes made between working and not working status is UNC update. UNC details got updated from F:/FDMEE to \\frs-ICT-03\FDMEE.
Below mentioned is error.
Executing open batch: Prestwick_Test
2014-11-27 01:40:25,661 INFO [AIF]: Copy from Src Dir: file://\\frs-ict-93\FDMEE/inbox/batches/openbatch/?customTheme=otn, Tgt Dir: file://\\frs-ict-93\FDMEE/inbox/batches/openbatch/7079?customTheme=otn
2014-11-27 01:40:25,661 INFO [AIF]: Error Coping from Src Dir: file://\\frs-ict-93\FDMEE/inbox/batches/openbatch/?customTheme=otn, Tgt Dir: file://\\frs-ict-93\FDMEE/inbox/batches/openbatch/7079?customTheme=otn. Check that source directory exists.
I guess, I have access to the folder but don't see file getting archieving in folder as per Process Id: Like if Process Id is 7080, batch loader normally creates a folder 7080 and achierve the files into it Correct ? But I am not able to see the folder being created and file getting achieved. Data Type = file load. Type = Open Batch Auto create data rule: Checked, Auto created data load rule is available in Data Load screen. File Name= 1~Prestwick-Test~Actual~Jan-14~RR Could someone you please let me anything else I need to check.
Warm Regards..

Hi Francisco,
I sent log file and screenshot of batch defination on your gmail id.
Please check and let me know incase of any other details.
Regards..

FDM Multiload Batch loader issue

Hi All,
I need help in Multiload Batch load process. I am working on FDM 11.1.2.1. We need to move data of 6 months. I am using comma separated Text file for this purpose.
When I am loading it through FDM user interface, it is fine (It is generating 1 export file for all 6 months with diffrent combination) but If I am trying to run it through FDM Batch load for Multiload it is generating the 6 export files and loading one by one (Which I don't want).
I want one export file generated for all month. Is there any setting by which FDM will stop multiple Export file generation for diffrent month.
Remaining process is Working fine if I am loading manually through FDM web.
Thanks,
Shivendra

Hi Shivendra
Unfortunately I think it is a "feature" of batch processing.
When processing multi-load files manually through FDM a text multiload source file produces a single export file while an excel multiload source file produces a separate export file for each period in the source file.
With batch processing unfortunately both types of source file behave the same as the manual excel way.
One option that may help you is parallel processing in the batch? Be warned though, that may not help either as the parallel processing will queue files for the same POV (I think from memory it treats different periods for the same location/category as the same POV in parallel processing so if you are loading say 12 periods for the same location/category you may not gain anything in parallel processing).
Hope this helps
Stuart

The wonderful world of Batch Loading - what's going on?

Hi,
I'm having an issue with the batch loader. When I load a file using batch loader and the the same file manually executing the workflow I get two different datasets at the import stage. I have a single import script and it seems that it doesn't execute properley when the file is loaded via the batch loader but does when I perform a manual import. I can't think of any logical reason for this. The script is getting executed but only partially when the batch load is run. I make use of a FDM temporary variable in the script RES.PvarTemp1, and this is the only thing I can think of that may be failing. Do these work when the batch load is run? Has anyone else experienced similar problems with the batch loader and import script execution?
Any ideas are very welcome :-)
FDM version 11.1.1.3 by the way
Edited by: SH on Mar 5, 2012 10:54 AM

Is the iPhoto icon showing crossed out? Like this?
When you shot down your Mac, it may have installed a system update, that had been downloaded automatically.
Which version of MacOS X are you currently running? The newest MacOS X version 10.10.2 requires iPhoto 9.6.
Try to download and install the newest iPhoto version from the App Store "Featured" page.

Batch Loader Email

Similar Messages

Maybe you are looking for