Batch management activation- mrp run

Hi, activated batch management for raw materials and stock of 10 qty uploaded with mb1c 561 mvt type, during this it generated batch number. craeted sales order for fert material for which these raw materials maintained as components. note that ici for raw materials are 2 (collective) in mrp4 view. now run mdbt and observed that mrp generated pr's for raw materials even though stock exists. pls advise how to ensure that system considers the existing stock even with batch no. thank you.

Hi,
Batches don't play a role in MRP. So, my guess is that your problem is somewhere else.
Check all the material MRP definitions, FERT, and components, and see that SO is generating requirements.
Mario

Similar Messages

  • Free Goods with Batch Management Activated !!!

    Hi Gurus,
    I have defined a free goods master data for material on which batch is activated. I have defined the it as with a min of 10 qty 1 free good will be delivered as exclusive item
    Now as the batch management is active and each batch has 1 qty in it. Now in order to deliver 1 free good first i have to enter 10 line item of the same material and after the 11 th line system should generate 1 free good item. But this is not happening is there any standard configuration required for this process
    Early reply will be awarded accordingly.
    Thanks in advance
    Edited by: Abaper Abaper on Jul 10, 2008 12:31 PM
    Edited by: Abaper Abaper on Jul 10, 2008 12:32 PM

    Hi Abaper,
    Free Goods Determination follows the condition technique and hence you should have one condition type assigned to it one access sequence and then maintain the condition type (NA00) in a Free Goods Determination  Procedure (NA0000).
    Then assign this procedure to your permitted sales area and maintain the free goods determination master data (VBN1).
    Also Check the settings of Item Category Assignment
    It should be ORNORMFREE+TAN -
    > TANN.
    By this settings your free goods should work.
    Reward if it helps you
    Regards
    Harsh

  • Stock ageing report with batch Management active

    Hi Experts,
    My client wants a Stock ageing report and batch management is active
    According to my client, Inventory ageing report should show stock quantities and stock value as follows,
    1. Below one year
    2. Between one and two years
    3. Above two years
    What are the table and fields to be considered for this report.
    Thanks
    NDS

    What steps do you mean? taking an ABAP course and doing it yourself, or stepping to an ABAPer and let him know what he shall do?
    you asked for a stock report, not for a movement report.
    If I go into my warehouse and looking at all the stuff sitting there and want a report that should tell me how old this stuff is, then i am not intrested if there was a goods receipt movement.
    However I would like to know the last movement date. In this case you have to look into table S032 or into the movements MSEG (with MKPF as header table)

  • Batch Managment Activation

    Hi, friends
    I want to activate Batch management at plant level.but there is stock in current period as well as previous period(in marterial master plant stock view).Stock exist unresticted stock,stock at vendor ,Quality Inspection stock.How i will do Zero stock at previous period.
    Regards,
    Kamlesh

    Hi
    Batchmanagement activation or deactivation should be done initially.
    First go to MM02 & try to activate batch , then the system will give error log.
    Read the same.
    It looks not only stcoks some other open documents also shouldhave been there.
    In that case you have to close all those to activate bacth.
    Please try in above lines.
    Regards
    YMREDDY

  • Does SAP Provide any standard conversion program for Batch Managment activa

    Hi,
    An idea if SAP Provides any standard program to conversion of non batch managed material to batch managed material in a productive SAP Environment and close open documents,
    It would be great help if somebody can reply to these queries.
    Thanks in advance
    Regards
    Bijaya Pradhan

    Hi
    Use the same Driver program RIPROV00 which is used as Script driver program to fire the output from smartforms also
    Only thing is little bit you have to modify the program such that it triggers the smartform instead of Script.
    I think there is no smartform driver program for this IW21.
    see some standard SF driver program like RLE_DELNOTE and
    modify it and use it.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Batch management active

    Hi, friends
    I want to activate Batch management at plant level.but there is stock  in current period as well as previous period(in marterial master plant stock view).Stock exist unresticted stock,stock at vendor ,Quality Inspection stock.How i will do Zero stock at previous period.
    Regards,
    Kamlesh

    Hi,
    I you want to activate the batch management, there should be any quants (stocks) left in the storage location, there should not be any open items etc.
    You need to take out the whole stock out of the storage location and then try to activate the batch at plant and sloc level, and then you activate the materials in the material master.
    Hope it works.
    Aktar

  • Batch management active and inactive for same material

    Hello,
    We are planning to use one single material that should be managed for some SD flows and not managed for other SD flows (all depending of the sales doc type).
    I know that the batch management is checked on the material level. Therefore we will need a development.
    Any ideas of how we should handle this topic ?

    Hi pat,
    U want to de-activate batch management for one particular material or for total plant (2nd)?
    If u want to activate batch management for second plant but still do not want to activate for a particular material, u can do thesettings in material master

  • Linkage of Sales Order with OPM Batch automatically through MRP run

    Hi Friends,
    Can anyone please suggest me of how the Linkage of Sales Order with OPM Batch can be created automatically after running OPM MRP.
    Thanks in advance.
    Thanks & Regards,
    Bharathram N.

    Dear Friend,
    Thanks for your update.
    I had the set ups already which you have specified. But I dont see in the action messages screen any sales order number for each action.
    My requirement is following..
    1. I will enter SO for an item called A.
    2. Run MRP.
    3. From Action Message Summary, I will release production batch.
    4. Now the batch been created should have the sales order number from which it came originally.
    Hence to achieve above, I need SO with MRP Link action message(backend or front end)..
    Hope the above scenario is clear to you..Plz let me know your thoughts..
    Thanks & Regards,
    Bharathram N.

  • Activation of batch management -Uploading and creation of new materialBATCH

    Dear All,
    Good day !!!
    We have activated Batch management in our business, whcih was running without BATCH management Active before.Now we have activated the batch management ,Automatic in case of GR creation and by FIFO basis in case of goods movement and SD and PP modules also.
    Now every transactions and data are working properly. But we need clarity on the master data upload and inventory upload.
    Suppose if we need to carry out the for the same material Batch to be activated or whether we need to go for new material and batch management active , Pleaes clarify on the process and also how we could upload the existing inventory from the existing NON Batch material into BATCH material (Which is created wholly as a new materail with batch)
    KIndly provide on the above 2 points which would be helpful for our business.
    Thanks and Regards,
    Amol.

    Hi
    I think with the help of  FI create a dummy cost centre and issue the material to the cost centre ,
    Look no Purchase requisitions or purchase orders are open on the material
    activate batch management to material and using 202 movement get back the material .
    as the process is very tedious use the help of badis for updating and cancellation if required
    this may be only process for activating new batches for material

  • Batch Management cannot be activated

    Hi,
    Its just not another Batch management activation issue. I read through the earlier posts without much help.
    I'm creating a 'New' material and after entering all information in MM01. When I tick 'Batch Management Indicator' in either purchasing or plant/storage view, I get display error which reads 'Batch management may not be defined for value only materials'.
    The material type used is spare parts and in OMS2 it uses both Quantity/Value updating. Valuation category is blank in accounting view. The material type is not semi-finished or finished goods. I have checked all the batch management config in Logistics general-->batch management and it appears fine.
    What can be the possible reasons for the error?
    Regards,
    M B

    M B wrote:
    Hi,
    >
    > Its just not another Batch management activation issue. I read through the earlier posts without much help.
    >
    > I'm creating a 'New' material and after entering all information in MM01. When I tick 'Batch Management Indicator' in either purchasing or plant/storage view, I get display error which reads 'Batch management may not be defined for value only materials'.
    >
    > The material type used is spare parts and in OMS2 it uses both Quantity/Value updating. Valuation category is blank in accounting view. The material type is not semi-finished or finished goods. I have checked all the batch management config in Logistics general-->batch management and it appears fine.
    >
    > What can be the possible reasons for the error?
    >
    > Regards,
    > M B
    Hi MB,
    Its a simple Logic that if the material stocks aren't quantity updated how can you have stocks for the materials? No stocks No batch. If you have configured wrongly for value only then change the same in OMS2.
    Regards
    Shiva

  • Automatic batch management for Production order receipt

    Hello ,
    I have a requirement to setup & activate Batch Management only for Production order Good Receipt . I am looking out for what all configuration / data setup will be required to complete this .
    To start with I have following questions .
    1. Whether such activation is possible only for Production order Good receipt - 101 mov.type
    2. IF yes , is Batch management activation status be at material or plant level .
    3. As I need automatic assignment , should I be selecting Internal batch management .
    4. What should be selected for valuation for Goods movement in Inventory management.
    5. Is it necessary to have batch determination by maintaining Condition tables / Access sequence
    6. What would be standard Class / characteristics to be maintained for automatic determination.
    Also I will have to work with the running system where Material are already active and have stock in system . What precautions will I have take if I have to activate the Batch Management in a running system.
    Appreciate all your expert advise.
    Regards,
    Lawrei

    Thanks Adler for your comments .
    With reference to your point , need further clarifications
    1. If batch management is selected to material , this means that it will be active for all movement types for Inventory and cannot be restricted to 101 mov.type .
    I see that in config node
    +Define Batch Creation for Goods Movements+
        +Using this function, you can define for each movement type whether a new+
        +batch is created for a goods receipt and how it is created.+
    Can I not restrict batch creation only for 101 movement , but again here I don't have options to select only for Good receipt for order - Tran/Ev type - WF .
    & what about below config node
    +Define Batch Creation for Production Order / Process Order+
        +In this step you can make the following settings in batch management for+
        +the existing production control profiles:+
    Is it possible in this node .
    Please advise.
    Regards.
    Lawrei

  • Batch management issue.

    hello all,
    i have batch management active in mm,automatic batch is created during GR.
    now i want to implement fifo goods issue,but it needs material master view to be extended to classificatio tab under which i will assign the class.we have almost 20000 material already in sap system ,this may be a big task to assign class to each material.
    is there any another settings or configuration available for fifo goods issue.
    i know the settings like.
    create a characteristic for last Goods receipt date with table name MCH1 & field LWEDT
    - Assign this to class 
    - Create sort sequence with ascending order CU70
    - Then create batch search strategy in MBC1 transaction if you want batch determination in production order
    - Give the sort rule there
    pls suggest me.
    regards
    simran.

    hello all,
    i am configuring fifo goods issue for 351 movement type.
    during configuration i have found following settings.pls tell me whats the difference between all these 4 option given below.what option i would choose for fifo.
    IMG > Logistics-General > Batch Management > Batch Valuation > Activate batch classification for goods movement in IM (only on Mvt Type 201 and not on 202)
         No branching to batch classification
    1     Classification carried out in background (all batches)
    2     Classification only in foregr.for mand.charac. (all batches)
    3     Classification always in foreground (all batches)
    4     Classification in foreground for new batches only
    regards
    simran

  • Batch Management Configuration

    Hi,
    While configuring the Batch Management through  Transaction u2013 OMCT.
    First  at Batch Level, selected the radio button as Material Level and Saved but Request is not created.
    Second at Batch Status Management, selected radio button as Batch Status Management active and saved but the Request is not created.
    We would like to know is Batch Management activation is Client specific?
    Batch Level field is disabled and we are not able to see the settings.
    Request is created only when the activated when Plant with Batch Status Management.
    Need suggestions on this please.
    Siddu

    REfer some useful stuff
    http://www.sap-img.com/quality/batch-management-batch-classfication-configuration.htm
    Activation of Batch Status Management is not transported and needs to be set
    up in each environment separately. As it is one time job in general and is a
    sensitive functionality, it will not be transported. In my previous
    implementation, the manual config is opened to mark this status.

  • Goods Issue from ECP with Batch Management

    Hi experts,
    I would like to make a Goods Issue from Execution Services in Easy Cost Planning. But the material has Batch Management active and I am not able to inform the batch.
    I know I can make the same movement from MB1B but I would like to do it from the Easy Cost Planning environment.
    Is it possible?
    Thanks

    mforman wrote:
    We already have the batch and deactivating batch management has no sense.
    > We need to be able to inform the batch when we are making the goods issue from the Execution Services.
    Dear,
    I think you can solve this through your Characteristics in the Costing Model. In the Characteristic Edit Screen, Goto Values tab, Select your material and click on Object Dependecies Button, see if you can use or create a new Dependency for your material for picking or suggesting batch number.
    Hope this helps...
    Thanks,
    Ranganatha. Patnala
    Edited by: Ranganatha Rao.P on Oct 14, 2011 2:59 PM

  • Batch managment and back flush

    Dears
    Some of my raw material is batch managment activated now i want it to be as back flush
    so pleae tell me what will be the imapct of doing the same'
    How system automatically issue the raw material from the old date batches
    AF

    Hi Abu Fathima,
    Batch Determination step as follows:
    For that you have to do five important steps or features you have to know OK.
    1) Batch number assignment: We use this function to assign a batch with a number that uniquely identifies it OK.
    2) Batch Specf: To describe each batch uniquely using like Characteristics and characteristic The values. are allocated in the material master.
    3) Batch status management: To indicate weather a batch is usable or unusable: We can set (a) Manually in the batch master record or at goods receipt and (b) Automatically in the usage dissension in quality management.
    4) Batch Determination: We can use this function for various criteria to search for batches that are in stock (a) movement type: When posting goods issues (b) When combining suitable components for order types.
    5) Where used list: The batch where used list shows the path of the batch from its procurement to its delivery to the customer.
    6) Active Ingredient Management: This function is to administrate and process materials with active ingredients that are to be handled in batches OK.
    Condition types: Say for x material if we want to determine the batch at the movement type/ plant/order type.
    Access Sequence: It will checks weather the batch determination is done with movement type/ plant/ material &
    order type/ plant/ material.
    Strategy type: We will assign here condition type and Access sequence and as well we have to maintain Class type: 023
    sort sequence, batch split
    Batch Search Procedure: Here we will define the search procedure and using the condition type here OK.
    Batch Search Procedure Allocation and Check Activation: Here we will assign the search procedure to the movement types and for order types as well
    HERE THE BELOW FOLLOWING DATA WILL GIVE YOU RIGHT UNDERSTANDING OK:
    a) It will looks for the search procedures.
    b) It searches through the strategy types in the search procedures for a valid search strategy.
    c) Characteristics from the selection class of the search strategy looks for batches with suitable specifications.
    d) Then it will looks for weather the batches are available.
    e) It sorts the batches that are available according to the sort rule from the search strategy.
    f) Then the system selects a proposed quantity with proposed quantity from the search strategy.
    Go -
    > Logistic General -
    > SPRO -
    > Batch Management you can find every thing there it self.
    Any questions revert me back please.
    Regards,
    Madhu.G

Maybe you are looking for